I went with the Edelbrock ProFlo 4 on the 331 in my 80 Capri and love it...wanted multi port fuel injection, had used other throttle body style injection and had nothing but problems. Love how you've kept the exterior "early Fox"
@cobrabuilt2 жыл бұрын
Hell yeah!
@Cammy_The_Camaro2 жыл бұрын
Had similar issues to yours. Check secondary throttle blades and also check your IAC.
@cobrabuilt2 жыл бұрын
I’m thinking it’s my secondary linkage
@Cammy_The_Camaro2 жыл бұрын
@@cobrabuilt I drilled a small hole in the linkage and put a throttle return spring on it.
@Lockedinstreetracing2 жыл бұрын
I don’t usually sub to mustang guys but seems like a cool channel I was gonna say it may be your I.A.C but looks like you have it under control brother I run all Holley too they have some of the best customer service I think hands down I’ve had my dominator and msd 600 for 2 years now and have had no problems out of it.
@cobrabuilt2 жыл бұрын
Hell yeah!
@mattspontiacta2 жыл бұрын
Damn I was just about over the fence to buy a Holley Sniper set up for my Pontiac 461 stroker until I saw this. I have spoke to several people who have done the Holley Sniper most have had good results and a few haven’t .
@cobrabuilt2 жыл бұрын
It’s a good unit! I highly suggest it! Parts fail and it’s been on the car for 3 years!
@mattspontiacta2 жыл бұрын
@@cobrabuilt it’s just not your review . I have talked to many guys over the past year and most have had good results but surprising there were a few that have had problems. But maybe it was their fault on the install or possibly a malfunction of the actual unit. Some even said if you have a good running carb save your money. That happens to be my case I do have a excellent running Holley 770 cfm carb. Been on my car for 6 yrs. I run a electric push pump under the tank through a regulator then electric choke carb. Starts up quickly every time. So at this point I am still undecided. I appreciate your review and nice to know Holley backs there product.
@kennethrobinson51512 жыл бұрын
Friend of mine just had his Holly EFI shit the bed sent it back to Holly they told him if it just needs minor repairs it will be 3 weeks if he needs a new one they told him August at the earliest... Go coyote swap with Ford racing control pack no issues ever
@cobrabuilt2 жыл бұрын
Kinda thinking that right about now lol
@jerrypuckett67332 жыл бұрын
I have a neighbor that works for Holley. He said NEVER buy a sniper. They’re JUNK. ESPECIALLY for Fords.
@cobrabuilt2 жыл бұрын
Some people have better luck than others
@jerrypuckett67332 жыл бұрын
@@cobrabuilt I know. That’s what I told him. Maybe yours was built on a Monday. If you’ve ever heard of that saying.
@christopherscott82722 жыл бұрын
This guy's idea of what "dire" need of a car wash is dramatically different than mine. I'm pretty sure he'd faint if he saw my idea of it.
@cobrabuilt2 жыл бұрын
😂
@79beans3472 жыл бұрын
I love holly and they replaced some parts for me without having to send anything back to them and got it to me fast. What's the verdict on the motor swap? Are you staying winsor or yote?. Killer videos man keep them coming👍🏼
@cobrabuilt2 жыл бұрын
Honestly not sure, it’ll stay a SBF for the rest of the year for sure!
@slowbra942 жыл бұрын
@@cobrabuilt my two cents. My 94 cobra is either going 351 for cost savings or ima save up and blow past the coyote and get a godzilla
@rodneygodin77732 жыл бұрын
U need to get a lab top and start tuning
@cobrabuilt2 жыл бұрын
Might just try!
@zachs19852 жыл бұрын
I had Rev hang and it was a vacuum leak. Kinda scary would tap the gas to hopefully knock it down and would just hold at the new rpm. It was one of the caps on the egr spacer for me that fell off
@cobrabuilt2 жыл бұрын
Yeah I’m gonna have to check that out and see what’s up!
@mnpyton2 жыл бұрын
All those sensors will get you. Carburetors don't have them. Just messin.
@cobrabuilt2 жыл бұрын
👀👀
@79beans3472 жыл бұрын
I subbed to his channel , i really want those wheels . He needs to make some videos. You make some of the best content on KZbin so keep it up. Did you decide what drivetrain you were going to use? Tell your boy that I was the first to sub to him. I had to find him in your subs cause he didn't have any videos made. But im glad that you got the ford brawler fixed and ready to kick ass and I can't wait to get them wheels because they will look badass on my ride seriously that is the perfect look im going for 💪🤠
@cobrabuilt2 жыл бұрын
Hell yeah!
@89gt5.02 жыл бұрын
I cannot take anyone seriously who wears Sun glasses indoors. Lol
@cobrabuilt2 жыл бұрын
There’s a reason. People who have wondering eyes (myself) do so that it looks like you’re looking at the camera without actually looking at the camera
@rodneygodin77732 жыл бұрын
Iac valve
@cobrabuilt2 жыл бұрын
👍
@coupe50h2 жыл бұрын
I've seen the throttle blades get hung up in the intake before, I'm sure that's not your issue though.
@cobrabuilt2 жыл бұрын
I have a well! This unfortunately isn’t the case! That’d be a easy fix
@Husky_cdn2 жыл бұрын
agree with the throttle blades, might have some shaft wear that might be binding when the holley has some thermal expansion when it warms up abit
@kskip42422 жыл бұрын
You have a vacuum leak.
@cobrabuilt2 жыл бұрын
I will check into that!
@kskip42422 жыл бұрын
@@cobrabuilt get you some spray start spraying around the base of the throttle body where it mounts check all your major vacuum lines going to your brake booster stuff like that.
@kskip42422 жыл бұрын
@@cobrabuilt also pretty common on the fox bodies is the brake boosters will go bad and cause a vacuum leak which will cause those kind of problems too.
@VictorSanchez-kp9nt2 жыл бұрын
I didn't think it was going to be mechanical although it does happen. My foxbody has 250k and still going strong and my f150 4.6 4x4 has 300k and going strong. Things happen.
@cobrabuilt2 жыл бұрын
Oh for sure!
@whiteknuckle14092 жыл бұрын
Quick question for you...With your Tremec TKX, is reverse gear tough to get into? I just installed a TKX in my Capri and it definitely takes more effort to get into reverse than I would like but I've got less than 100 miles on it... And I think a race between our two cars would be insanely close as they are so similar...Built 331, TKX, 3.73 but I'm in the Pacific NorthWest so that ain't happenin'!! kzbin.info/www/bejne/d6Svlp2YeLucirs My videos are lame Yours are entertaining and your Cobra is bad ass
@cobrabuilt2 жыл бұрын
Thank you! Reverse is easy to get into. You have to go from 1st then to reverse for it to get into gear easy
@whiteknuckle14092 жыл бұрын
Thanks Cobra guy!
@JumpCutThis2 жыл бұрын
I hope Brett can make better videos than he can operate a sawzall:) Why are there no videos yet Brett?
@cobrabuilt2 жыл бұрын
He is in the process of making one!
@SBALL140en2 жыл бұрын
Holley is an all around good product! From old school to the new school Holleys💯