Over time my cetus motors got hotter and hotter during operation, eventually chewing filament after the raft without fail. They should just ditch the proprietary stuff, the market won't tolerate that anymore.
@mondair992 жыл бұрын
This has happened to me too, and sometimes it doesn't even get through the raft. Very frustrating
@churchofeg2 жыл бұрын
I'm preaty that's broke an entire extroder head for me
@Lucas_sGarage Жыл бұрын
@@mondair99 Throw some heatsinks on it
@mondair99 Жыл бұрын
@@Lucas_sGarage thanks boss, I'll try to remember to keep you in the loop
@Lucas_sGarage Жыл бұрын
@@mondair99 Sure, take care
@nrdesign19912 жыл бұрын
Did a very similar mod with a colleague's DaVinci 3D printer, and he was SO glad to be finally able to use open source software, any slicer and any filament he wanted.
@LordHonkInc2 жыл бұрын
This is one of the things I love about 3D printing as a tinkerers' hobby, the mechanical principles are comparatively simple (if you got four motors and parts for those motors to move, you've got the basics) and the software side is so open that you can get pretty much everything that can command stepper motors and relays to run gcode. (I'm oversimplifying a bit, but really, for something that creates physical objects, 3D printers are incredibly easy to understand even for idiots like myself. Like, for comparison I don't think building your own injection molding machine is anywhere near as simple.) I got into things with the Ender3, and after tinkering with it for two years I think the only stock components that remain are the aluminium frame and motors xD
@urano19882 жыл бұрын
What a coincidence! A week ago I completed the electronics conversion of my MK2. I did it with an arduino mega + ramps 1.6 + TMC 2130 + raspberry PI 3 so that I could go with klipper. I didn't want to replace the very cool PT100 thermocouple for a shitty thermistor, so I went for a max31865 SPI adapter board. I also upped the voltage to 24 V as running the heating cartridge at the standard 19V was a pain. Now it is a pretty amazing machine!
@inoahmann75422 жыл бұрын
I did something very similar on my MK1 last week too. Lol. I used an mks robin nano v3 with tmc 2209 drivers. It's got a touch screen and wifi but the screen is too big to mount anywhere on the cetus. What power supply did you go with? My heated bed is super weak on 19v. It draws 30w. I did the math and going to 24v should get it closer to 60w. Unfortunately, I did have to ditch the pt100 because it failed and I opted to replace the entire extruder/hotend. I ended up going with the kp3s titan extruder. It performs great and now I just use standard mk8 nozzles. Last night I put a 3d touch on it, so no more frustrating warped build plate.
@urano19882 жыл бұрын
@@inoahmann7542 For the time being I am running it from my lab bench PSU and I have a step down converter for the RPI, Arduino and fan. With everything powered it draws about 3.2~3.5 A @ 24 V so I was thinking about getting an EPP-120S-24 PSU, which has a very small footprint. There are also more powerful (but larger) versions if you want to plug the heating bed.
@inoahmann75422 жыл бұрын
@@urano1988 thanks! I think I'll go with that same power supply. Maybe a slightly bigger one if I can still fit it in my electronics enclosure. If I need to I can limit the power to my hotend and bed to stay under the 120w limit.
@sealightube3332 жыл бұрын
I currently upgrading my Cetus MKII and MKIII I replace the Cetus extruder to BIQU H2 extruder. I also replace the TinyFab MCU/mainboard to Melow FLY RRF E3 Pro with the integrated max31865 SPI PT100 IC. And because of the shorter heater cartridge for BIQU H2 extruder I use a Mellow 24V 70W heater, and increase the voltage from 19V to 24V. And I will also design an extra PCB for the PSU connector and for the Z axes hardware break by a relay. This feature is on the MKIII mainboard and also designed in the TinyFab mainboards as well.
@psedach2 жыл бұрын
What an amazing project. Good to see that there are open source boards that can make old hardware more functional
@marsgizmo2 жыл бұрын
A pretty interesting board. Love the PCB adaptor 😌 and would definitely be interested to see more details about HP MJF.
@yitspaerl72552 жыл бұрын
Thanks for this video. Nice to see theat you transformed your Cetus into a good machine. I use a Fly 3 pro on my Ender 3v2. Ik like it a lot. No more recompilations of the firmware when I do a slight modification of the hardware. No extra Raspberry with Octoprint which doubles the amount of complications. I love this solution. Please remember to change the gcode dialect in your favourite slicer from Marlin to Reprap. ;)
@dangerous83332 жыл бұрын
Does it work with a BL touch or CR touch? As I learned more about my E3 V2 I realized I can turn it into a really nice printer instead of buying a different one. My CR touch and Jyers firmware is a joy. I like the options this fly 3 adds. I'm also a minimalist. Any hardware I can install that will do the work of multiple pieces of hardware, I'm all for.
@yitspaerl72552 жыл бұрын
@@dangerous8333 I used the FLY with a BL touch clone. Twotrees I believe. It's a bit more ciitical to ajust compared to the original.
@appleorange342 жыл бұрын
Yes please! I'd really enjoy seeing a CNC style strength test! Your strength test videos are some of my favorite videos! If you need a suggestion on videos series please also consider doing a resin accuracy and strength test for msla! Lots of resin are for sale but not many engineers test them. Having a series for people that want to use them for engineering products would really be helpful.
@deuterium82362 жыл бұрын
Original cetus circuit board had a vase gcode bug. I think they implemented vase as delta Z moves but the firmware math truncated the remainders. Now running duet and happy. A good mod is a 1kg force linear spring ($8-20) to counterbalance Z weight which eliminates the Z stepper brake and prevents the nozzle from crashing into my heated glass bed with no AC power.. Cheers-Peter
@3DMusketeers2 жыл бұрын
Open source is best source! I do like the replaceable drivers, but I would be lying if I said I ever replaced one before, never needed to! lol. Love that RRF is implementing klipper systems as klipper is honestly a pain in the butt :/ Glad this worked out, will have to try it out on one of our machines!
@patrykK10282 жыл бұрын
My SKR Mini E3 broke and I was ready to buy a Robin mainboard and then suddenly I came across this video. What a perfect coincidence! Now I'm waiting for my Mellow Fly and before watching this I didn't even know it was a thing :)
@3DMELLOWPrinter2 жыл бұрын
What an amazing project.👍👍👍
@Yakeru352 жыл бұрын
Perfect for my Printrbot Simple metal, it's gathering dust for a while now, which is sad ... a board like this would bring some well deserved life back into it :)
@ianthehunter35322 жыл бұрын
Finally, someone who reviewed jlcpcb 3d prints! 😅
@joshuahuman12 жыл бұрын
I’m glad more boards are starting to use reprap firmware and isn’t limited to duet boards only anymore especially since duet boards always seem to be pretty big and expensive since your usually paying for a bunch of features you don’t need
@jayphone12 жыл бұрын
I am interested in a strength test. Maybe even in comparison to standard SLS parts.
@TJ130620102 жыл бұрын
+1
@mkmachining79572 жыл бұрын
MJF is superior in z-axis strength and consistency to SLS and is superior in every way besides specialized material availability. I own two 5210 MJF machines and would be happy to provide CNC Kitchen some parts for testing!
@AndyLaurence2 жыл бұрын
+1
@jayphone12 жыл бұрын
@@mkmachining7957 What is the reason for this? Layer height? Temperature? Maybe Stefan can find out.
@andreaudio2 жыл бұрын
Yeah.. that fancy nylon print would be a great test subject checking for accuracy and strength.
@pr0xZen2 жыл бұрын
Haven't tried the fly boards myself but I'm on the Mellow discord server and there's tons of good-spirit community activity and _very_ active engagement from Mellow themselves on these fly boards, troubleshooting, iterative improvements and custom versions etc. So I wouldn't worry about these boards getting deprecated anytime soon, their adoptation is likely gonna spread, along with more firmware development and new forks. I'm not too big on speaking about these kinds of companies, I find they often disappoint in some way. But I gotta be honest - Mellow's community engagement and openness to community feedback and suggestions has me softening a bit. They even have a dedicated discord channel for suggestions 😊 And funnily enough, my last two suggestions pretty much both got the same replies (within roughly 20 minutes): "already in design" and "already in development".
@trombonebone174563432 жыл бұрын
Huh, literally just ordered one of the pro versions of this for my ender 3 a couple weeks ago. Probably a good sign to see it here!
@Sindarius2 жыл бұрын
You’ll love it. Significant upgrade!
@tseckwr37832 жыл бұрын
Really enjoy these type of videos ... like putting a nice QUIET engine in the car so when you drive by my house, I don't even hear you.
@the0bone2 жыл бұрын
Hi @CNC Kitchen, Pronterface can also transfer small letters by adding ' in front of a letter. P'A'S'S'W'O'R'D is Password. That is not quite as convenient but for once entering a Hotspot and Password...
@CNCKitchen2 жыл бұрын
Thanks for the info!
@BKMorpheus2 жыл бұрын
is that a typo/error at 4:30 where (after telling that linear advanced is also available) you say that even linear advance will be available and can reduce ghosting. I think you meant input shaping instead of linear advanced in that moment, right? Grüße aus NRW
@JasonZnack2 жыл бұрын
Yes this was a pretty glaring error. He's definitely meaning input shaping. In RRF Linear advance is called pressure advance btw.
@jaag32802 жыл бұрын
If I ever need q&a for a custom board I know who to send a free one to! Seriously, great video and now I'm more convinced than ever to buy an $80 printer on Bangood and just swap out the mobo and start printing.
@certified-forklifter2 жыл бұрын
Stefan, what a great video! I like RRF myself. But please, tell us that you got the board from the manufacturer at the start of the video!
@notsam4982 жыл бұрын
Nice to see RRF ❤️. I use RRF on my machines and adore this firmware. One board, easy config and decent features.... Did I mention very stable as well?
@CNCKitchen2 жыл бұрын
Same here, most of my everyday printers now run RRF. It takes a bit to learn but now I love it!
@jexom2 жыл бұрын
I liked RRF but the problem for me is that if something doesn't work, the support for it is as useless as windows support. Switched my duet board to Klipper and never looked back since
@notsam4982 жыл бұрын
@@jexom I've honestly been able to find documentation for everything I've ever had issues with. The wiki pages are pretty well written. Though I gotta admit having stuff like a discord server for the vorons which usually run klipper is pretty sweet.
@JasonZnack2 жыл бұрын
@@jexom On the Duet forum you can literally talk to the developers and they will walk you through your issue. Is that useless?
@pr0xZen2 жыл бұрын
Will you consider reviewing the Phaetus (or rebranded as Trianglelabs) _'Rapido'_ UHF hotend? It's a high-volume, quality workmanship, mostly nickel-plated copper unit with strong construction and a (up to) 115 watt ceramic heater, that give even the Mosquito Magnum Plus and Supervolcano a run for their money. And it does so while still using the regular M6 reprap/V6 nozzles we already have, or optionally regular Volcano nozzles. Slap a large CHT or Matchless nozzle on that puppy and it might just pass 100mm^3/s. For $99. I believe the... "contentious" (?) aspects are more than different enough that this one goes clear of Slice's and E3D's patents.
@Hotcubcar2 жыл бұрын
I finally got a new 32 bit board to replace a 6 year old 8 bit one, and I didn't think it was actually possible for my machine to be this quiet.
@ValTek_Armory2 жыл бұрын
that was how I felt when upgrading my original CR-10
@Kalvinjj2 жыл бұрын
I had a reverse experience at work. When I built my machine, I built it from the ground up with TMC2208s, and later upgraded to closed loop steppers (the BTT NEMA 17s, great stuff). They're really quiet, became a "silent but the fans" printer. No money for Noctuas here. Then at work I was tasked to revive an old small CNC router, and found an Arduino Mega + RAMPS 1.4 setup with the classic A4988s there that I could use, and heck that thing screams, I had no idea they were that loud normally.
@mvadu2 жыл бұрын
Awesome.. This is a great video.. I currently have a smoothie board running my Cetus. But I will try this one soon.. BTW the original cetus heater block uses Pt100 as temp sensor. The pro version has a variant supporting pt100 so chose that if you don't want to switch original temp sensor
@CNCKitchen2 жыл бұрын
Thanks for the info!
@stevenb60982 жыл бұрын
I'm having major DejaVu watching this. Wasn't the same machine pulled off a dusty shelf and a new board added in an earlier video?
@TheMadRocker2 жыл бұрын
I believe his last video about this machine was about fixing the lopsided extruder gear to get consistent extrusions.
@CNCKitchen2 жыл бұрын
Partly, yes. The last one was about the wobbly extruder gear, this one's about the mainboard.
@jacksoni3492 жыл бұрын
Love this project, this exactly what I did top my Printrbot Simple Metal
@NexGen-3D2 жыл бұрын
I just did this with a Dobot Mooz, I used a BTT E3 RRF board, it can now print any material, much better printer than the Cetus, but had a terrible main board and closed software.
@avejst2 жыл бұрын
Wow, great work! Great video as always Thanks for your big work into the community :-)
@Griffin125362 жыл бұрын
This is exactly what I was looking for. I love the Cetus but it needs some slicer tuning and it just can't. I'll have to attempt this one myself.
@TimWittwer2 жыл бұрын
@10:09 M997 is narrated as "M197". Still, far better English than my German.
@iceboundglaceon2 жыл бұрын
do you think this would be a good idea for upgrading a budget printer?
@phenix_labs2 жыл бұрын
This really felt like an add for the Mellow board
@Peter_Schluss-Mit-Lustig2 жыл бұрын
More like RRF commercial
@CNCKitchen2 жыл бұрын
Tried to show the good and the bad, but I'm seriously happy with the hardware and firmware.
@phenix_labs2 жыл бұрын
@@CNCKitchen I am a long time viewer, trust your videos, but still it sounded a bit like a commercial. But it's a cool board too!
@Peter_Schluss-Mit-Lustig2 жыл бұрын
@@CNCKitchen to be honest, working with RRF so far felt to me as if i was doing a commercial as well It's just so user friendly
@AndrewGillard2 жыл бұрын
The PCB design isn't a whole lot of work, tbh. As Peter says above, RRF is the real star here. The time invested into RRF development will probably be hundreds of times that of the Mellow PCB - which is why it's a bit of a shame that the RRF devs likely aren't supported by purchases of these boards... (I suspect a significant chunk of the Duet boards' prices goes towards firmware development, hence the higher prices.)
@platinum_mad43802 жыл бұрын
Ive been really looking forward to this video, ive had my mk3 for about 1.5 years now and have had mixed feelings the whole time. The fire and forget software was nice at first but the interface for tuning profiles is absolute mess. Im preforming this swap as soon as I'm able to. Thanks for your work Stefan o7
@CNCKitchen2 жыл бұрын
Happy to hear that! It's a great project for a rainy weekend.
@REDxFROG2 жыл бұрын
Good luck destroying a great machine. 👍 Convert it into a Mk3S+. Because there is nothing better.
@EricMcCormick2 жыл бұрын
Wish this was posted 3 weeks ago. I just bought a duet 2 to convert my Cetus MK2 to do just this.
@CNCKitchen2 жыл бұрын
Sorry to hear that. Hope it worked out for you!
@EricMcCormick2 жыл бұрын
@@CNCKitchen I have been messing with it all day. Unfortunately, I have MK2 and you started with a MK3. So there are some variances like trying to get sensorless homing working. I also switched from using the standard hotend to a Slice Copperhead.
@EricMcCormick2 жыл бұрын
Haven't started a print, but I have about 90%+ of the printer verified working. Last thing is swapping the sensorless homing with a capacitive proximity sensor for the Z axis.
@CarbonPark2 жыл бұрын
I also have a Cetus MK3 so I really enjoyed your video. I have a question. Can I still use the cetus' optional heatbed and lcd after that upgrading? I think the connector looks different, but I'm not sure.
@TheNikwad2 жыл бұрын
Just curious, Why hide your local ip in the video? Its not like it can be misused.
@carsonmyers48432 жыл бұрын
When will your adapter boards be available? Very interested in converting my mk2
@notreal1545 Жыл бұрын
He has the gerber files on on his Github, but i dont which ones to upload to JLCPCB
@dwietr2 жыл бұрын
Nice video, this might be a mod I'll actually try. At the moment the only mods applied to my cetus is a new 80mm Noctua Extruder/Part Cooling fan + adapter, because the stock one was really uncomfortably loud. Although I'm okay with the prints I'm getting out, using something different than the proprietary UPStudio Slicer (which I dislike) with added microstepping capabilities would make this upgrade really worth the effort. Anyway, thanks for sharing :)
@Dyfcom212 жыл бұрын
What is with the bed leveling and software Endstops? Is there an option? And what is when the Cetus has a Heated bed? I like this Projekt! Nice work!
@capnthepeafarmer2 жыл бұрын
I'd like to have more information on Kicad, like a primer for Mechanical Engineers. I'm still not comfortable enough with PCB manufacture
@LonersGuide2 жыл бұрын
Good to see another good competitor entering into the control board space, but as you implied, Duet may be a safer bet in the long term.
@BH4x0r2 жыл бұрын
The MJF is interesting, i've used JLC a few times for PCB's but if i want stuff like the Orbiter/Sherpa mini etc i can now actually get it printed without buying an entire new extruder, since i have an Orbiter and would like to test the Sherpa mini that could be useful..
I have one of the pro boards in my ender 3 pro and in my opinion made a night and day difference in performance. I bounce between RRF and Klipper on it for testing and playing around. Also yay I saw my GCode Viewer on the video :D
@CNCKitchen2 жыл бұрын
Great work!
@sealightube3332 жыл бұрын
Nice video! Thanks for the inspiration!
@CNCKitchen2 жыл бұрын
My pleasure!
@JakeBarger2 жыл бұрын
Just a note: At 4:34 you said 'RRF has begun implementing Linear Advance in the latest version' but I believe you meant input shaping, as in the image you show the input shaper test model as well. As Linear advance has been in RRF for quite a few versions now.
@CNCKitchen2 жыл бұрын
Yes, you're right. I was too excited after my Klipper joke and messed it up.
@JakeBarger2 жыл бұрын
@@CNCKitchen haha worth it since it sums up the community pretty well. Hopefully I don't come across as a 'but klipper' person, but I'm genuinely interested in your opinion given your knowledge of 3d printing. From my comparison standpoint, and considering I have several printers running RRF and several with Klipper, I think I prefer klipper slightly more for two reasons: 1. The first and foremost being that I'm a software developer, and so have command-line access where I can deploy scripts and modify any components as I see fit. This is a bit harder with duet. 2. The second being the actual hardware of the Pi being high quality. I have had many issues with the wifi reception with the stock duet antenna and even using add-on antennas. I sometimes send extremely large files and so this can be a pain, whereas the raspberry pi 4 even supports wifi 6, so it caters well to my impatience. In summary they are both great with slight differences, duet is more user friendly, and klipper more configurable. Almost like macOS vs Linux.
@jayphone12 жыл бұрын
I have a Cetus MK1. This was my first really functioning 3d printer. (After the Buccaneer from Pirate3D with which I only did 2 prints and then it died. And I believe it even arrived later although backed earlier on Kickstarter.) I am thinking about modifying my Cetus as well because it was a little neat machine, but I am a little afraid that getting to learn all the new stuff about the board and the software driving it will take me too much time.
@CNCKitchen2 жыл бұрын
If it's not your only machine, it's a great learning opportunity, though it will require some time and skill.
@REDxFROG2 жыл бұрын
I think a Skr1.3 board with stepper drivers on it will be the easiest approach. No need to fiddle around with multiple boards and connections and weird firmwares. Just use Marlin on a SD card, done.
@MMuraseofSandvich2 жыл бұрын
The more firmware and controller options, the better.
@CNCKitchen2 жыл бұрын
Good point! And all have their place IMO.
@no_one26912 жыл бұрын
Hello Stephan, my question is do you think that the bigtreetech rrf e3 v1.1 will do the same work as the your presented mellow fly?
@MarinusMakesStuff2 жыл бұрын
I wish I had a Cetus! :) (but I already have an RRF Fly 3 board that I'm going to put into my very old and crappy Delta printer! And I expect a lot from it!).
@Loneman_OG2 жыл бұрын
@5:10 I wish someone would make one of those awesome adapter boards for the CR10s-Pro, I really want to upgrade to 32-bit and those FLY boards look pretty, er, fly... for a wifi. 😎 Thanks for the most excellent video.
@CNCKitchen2 жыл бұрын
The CR-10 is internally very much like the Ender-3, so a conversion doesn't need an adapter board and most of the connectors should be reusable. Maybe check the Discord.
@Loneman_OG2 жыл бұрын
@@CNCKitchen The CR10s-Pro has a 30-pin ribbon connector. I did see a breakout board a while ago somewhere which was 30-pin to JSTs, but I think the chap only made a few. The alternative would be to chop the large connector off and, split the ribbon cable add male JST connectors.
@paulw9068 Жыл бұрын
Do you have any more of these boards as I can’t seem to see them on your store? Thanks in advance
@vedanthinorn2 жыл бұрын
There are a few time where you say "linear advance" instead or "resonance compensation" or "input shaping" at least one was obvious in context but from then I was wondering whether you meant linear advance or not each time you said it.
@diederickb18062 жыл бұрын
how did u find out the pinout? just testing every ribbon? i need this for a up box with broken main board really bad (dont think the same board will work tho)
@Kalvinjj2 жыл бұрын
"I'm sure many of you have an old 3D printer in a corner [...]" Bro when I started watching this channel I didn't even have _one_ let alone some old one gathering dust! And now I just have one as well...
@CNCKitchen2 жыл бұрын
At least it seems you made the right choice! Thanks for watching.
@Kalvinjj2 жыл бұрын
@@CNCKitchen Gotta say this channel helped a lot with gathering information for the build and my 1st prints.
@Nappen872 жыл бұрын
i would not get a board that runs rrf. i go fpr the genuine duet boards. after all problems i had with marlin back in the days and almost quit the hobby i ordered a duet wifi. and the support i got from dc42 made me a returning customer. all my printers my custom built voron/hevort hybrid. my tridebt idex. and my ender 3 and flsun sr all run duet boards and i think its worth to support the duet crew
@hunt05832 жыл бұрын
do you recommend getting the cetus2 3d printer?
@marckoliver2 жыл бұрын
Would that conversion be possible on a TierTime UP Mini 2? This printer as it is is totally unreliable which is frustrating for a very expensive machine... Thanks in advance.
@ThylineTheGay2 жыл бұрын
0:07 my "old printer in the corner" is the buccaneer 3d printer, from first hand experience i can confirm that that printer was garbage.
@berberger48142 жыл бұрын
4:29 what is the problem here? why is there always this klipper/reprap firmare hating? did I miss something?
@licensetodrive99302 жыл бұрын
I jumped in the 3D printing pool with arm-bands and a float by starting with a Prusa i3 Mk3 a few years ago ;) But I still find these videos about other printers and their abilities/quirks/fixes fascinating because it's all related and I learn more about 3D printing in general.
@NicksStuff2 жыл бұрын
You mentioned Marlin and Klipper but you didn't say why RepRap was better suited to the Cetus in your opinion
@piconano2 жыл бұрын
What is the difference between RepRap firmware and Marlin? I have an ANET A6 which I de-gutted and replaced their main board with an Arduino 2560 and RAMPS 1.4 running Marlin. I didn't like their firmware and also the stepper drivers were soldered on the main board. That was a deal breaker for me. So I replaced their board.
@JasonZnack2 жыл бұрын
The main difference between marlin and Reprap is that Marlin requires recompiling the firmware to make changes to your settings but with reprap you can edit a plain text file and have it change right then and there. There's a lot of other features as well, but on a day to day basis that's probably the main thing.
@piconano2 жыл бұрын
@@JasonZnack Thanks
@marcusjenkins2 жыл бұрын
Looks interesting for Kingroon K3PS
@kamil48742 жыл бұрын
Hey, are you going to test any Pellet Extruders? Its hard to find a good review about quality, retraction and other issues =c
@boryshacker2 жыл бұрын
I klipperized mine, changed the extruder thought because hate custom nozzles
@REDxFROG2 жыл бұрын
"custom nozzles" ?
@ravenous142 жыл бұрын
@@REDxFROG I assume he meant proprietary
@aminghafoori64962 жыл бұрын
of course we want to see a strength test
@jms12602 жыл бұрын
This is off topic perhaps, but what ever happened to that material creep test? (What would you build your Voron out of now if you did it again?)
@CNCKitchen2 жыл бұрын
Parts are still "ageing" in my office 😉 For the moment I'd just go for ABS or ASA but I also had good results with annealed CF Nylon parts.
@microhaxo2 жыл бұрын
Oh man. My cetus mk2 prints great but its so loud. This is a bit of a project just to make it more quiet.
@CNCKitchen2 жыл бұрын
Exactly what my problem was! If the pinout of the extruder ribbon cable is the same, my adapter board should work as well!
@AstroSmoke.2 жыл бұрын
I purchased Duet 6HC boards with the two RatRigs I ordered just because of the nonsense Thomas suffered. I prefer to stick with those who are professional. Once I have these printers up and running I'm going to convert my CR6SE to a Duet board.
@CNCKitchen2 жыл бұрын
Great choice! Have the Mini 5+ still in my Prusa and am super happy with it!
@istvanmaasz67712 жыл бұрын
How fast is the upload for the wifi? And by linear advance, did you mean input shaper?
@JaySuk2 жыл бұрын
ESP8266 boards manage about 500-600kb/s, ESP32 boards can peak at 1.6-1.7Mb/s
@leogray10912 жыл бұрын
BUT KLIPPER! part is so funny. Yes you put it in there just in time and probably shut a lot of us up. Good job.
@RC-12902 жыл бұрын
2:57 I don't think I've heard "proprietary" pronounced that way before. I usually hear it as "pro-pry-a-tree" or "pro-pry-a-terry", with emphasis on the "pry".
@xxbzr470910 ай бұрын
please make custom boards and a video for tronxy x5sa pro
@markusmaeder13882 жыл бұрын
On my Ender 3 Max I have an RRF E3 Pro. I had to switch from an RRF E3 when I added dual axis and didn't have enough steppers left. Firmware and hardware are nice as is discord support. After playing with Klipper for some time now, on my Anycubic Vyper I hope I can run Klipper on these RRF boards in the long run. Why? The camera integration on RRF boards doesn't appeal to me and I need a computer for timelapses.
@powersv22 жыл бұрын
Mainsaill just added timelapse functionality
@markusmaeder13882 жыл бұрын
@@powersv2 Yeah, and I like it. One more reason I am getting away from Octoprint.
@ztynzo2 жыл бұрын
Curious what filament was used for that orange vasemode print... it was pretty!
@CNCKitchen2 жыл бұрын
That was 3DJake MagicPLA Sunset Sky.
@peterkiss12042 жыл бұрын
"buttclipper" sounds like a really interesting concept. :D
@CNCKitchen2 жыл бұрын
Thanks to JLCPCB for sponsoring this video! PCBA from $0 (Free Setup, Free Stencil) jlcpcb.com/RHS JLC 3D printing service: jlcpcb.com/3d-printing *Correction* I said RRF started implementing Linear Advance but I meant they started implementing *Input Shaping*. Sorry. Mainboard conversion or buying a new one? What's your take?
@boryshacker2 жыл бұрын
Conversion, it was a good machine in 2017 but now is a pain in the ass to use. Modded mine as well but I have changed the extruder also. Hate proprietary nozzles. Do you have links for the extruder stepper mod?
@Mobile_Dom2 жыл бұрын
perfect impression of Klipper fans, i love the firmware but they're often a bit much
@ianbruene15292 жыл бұрын
But...... _Klipper!_
@Brandon30552 жыл бұрын
I'm a klipper fan, I think its great software. And sure I was a little sad Tom decided not to use it on his voron. But then the way the klipper fanboys harrased tom and most likely pushed him away from klipper for good really makes me angry. I just hate it when a few loud idiots ruin a good thing for everyone else.
@testfag2 жыл бұрын
@@jamesmelemede5610 reread your comment but slowly, all your hate is going towards a person with his own opinion. you are going all out on Domenico and even pull in Thomas (who even isnt even mentioned except for your comment) really great job of not putting the klipper community in a bad light really really great job.
@thevoidedwarranty Жыл бұрын
Daddy chill .
@oleurgast7302 жыл бұрын
You mean "input shaper" as the new feature. "linear advance" is a feature included for years.
@CNCKitchen2 жыл бұрын
Totally right. I think I was too excited about my Klipper joke 😅
@wingbats2 жыл бұрын
You mention linear advance a few times when I believe you are referring to resonance compensation/input shaping instead
@CNCKitchen2 жыл бұрын
Yes, you're right. I was too excited after my Klipper joke and messed it up.
@ps3customgamer2 жыл бұрын
I’d be surprised if there wasn’t a weird issue with running a 24v at 18v
@jamescerven44002 жыл бұрын
Please make it wireless! That would be so cool!
@christophmuller35112 жыл бұрын
It’s running RRF, it IS wireless with control through the WiFi.
@jamescerven44002 жыл бұрын
@@christophmuller3511 oh I mean wireless by connecting it to a battery
@christophmuller35112 жыл бұрын
@@jamescerven4400 yeah, was not finished with the video yet…
@unherolike2 жыл бұрын
My Cetus Mk2 is my printer in the corner.
@95WackyDj Жыл бұрын
Hi, i got an UpBox+ and i want to do a board swap with a bigtreetech... I want to use a proper slicer, gcodes, add a screen and a card reader and even change the extruder assembly because i hate the tiertime's as it is... Can someone give me some hints?
@steveclark33792 жыл бұрын
it would seem that both boards are no longer available 😕
@Woyta2 жыл бұрын
Than fan connection to 5v rail is not a good idea. It could kill board. You dont want to have 19v on 5v rail. I would recomend revision of adapter board with DC-DC converter and mosfet controled by fan output of board.
@mafr92912 жыл бұрын
@Stefan du solltest deinen mk3s definitiv auch auf rrf upgraden ;) scheiß auf das Rambo-Board, hau ein duet rein und das Teil performed wie kein anderes und du hast die DWC ;)
@TotallyNotNuclear2 жыл бұрын
Is Cetus a brand or a model?
@MrBlackmidi12345678909876543218 ай бұрын
sub brand of tiertime
@sheldonbell1902 жыл бұрын
Would this board conversion work on a JG Aurora A5S? The main board for mine broke and I was wanting to replace it with a more feature rich one.
@CNCKitchen2 жыл бұрын
It should work, only the screen might be an issue.
@Lucas_sGarage2 жыл бұрын
Average Klipper fanboy be like: BUT KLIPPER!!!! Marlin/RepRap enjoyer: u aren't special anymore
@coltenmeredith8899 Жыл бұрын
It's mainly the interfaces for me. Mainsail is just.....Beautiful
@Lucas_sGarage Жыл бұрын
@@coltenmeredith8899 i can't argue with that
@tomascancino6982 жыл бұрын
4:29 best of the video , its a great video and information thanks
@superbrain38482 жыл бұрын
im quite happy with my Duet 3 Mini 5+, replaced the stock Mainboard in the Sidewinder x1 with it and got now quite a lot of prints done.
@4funrc112 жыл бұрын
Hmm... Wondering if this could work on my old original CR-10? 😒
@CNCKitchen2 жыл бұрын
Yes, should be compatible with the CR-10.
@varazir2 жыл бұрын
a "JLCPCB " request, I'm looking to mod my old printer ( wanaho i3 v2.1 12v SKR 1.3 upgraded and with BLTouch ) with break out board so I just have one cable between the extruder and the main board. So a generic video on how to set something like that up.
@boryshacker2 жыл бұрын
Any links for the extruder stepper mod?
@CNCKitchen2 жыл бұрын
The STL can be found here: www.prusaprinters.org/prints/77611-cetus-mk3-new-idler-for-improved-extruder-gear Check the full video on KZbin about the mod: kzbin.info/www/bejne/l2TSgqxsq5iAqKM
@boryshacker2 жыл бұрын
@@CNCKitchen thank you!
@BH4x0r2 жыл бұрын
hey btw it doesn't hurt if people got the 192.168. ... IP adress as that's a local only adress on your router, so someone would need to get on your internet to make use of that