I'll Never Paint The Same Again! - Painting EK Engine Bay

[@izayahcabrera7652]

anyone else love how Courtney is getting more involved in the videos?

[@xXSCARECROW19Xx]

It's nice to see her involved. Nice to see couples who care about each other's stuff.

[@harrykauf3741]

I´m always excited, i think it´s really cute

[@patrickpaul4901]

It’s even better that she’s asking to be or just showing up ready to go. There’s a huge difference in wanting to participate vs doing it because you’re asked too.

[@luxs2118]

I think she's involved a lot behind the scenes but its nice to see her in the videos 😊😊

[@jacobhines1692]

He dropped that hint that their getting married

[@jn7154]

@5:50 "spent my money on something else, just something that's going to make me happier than cars" congrats on buying a ring homie

[@zanecovey9820]

Just a lil slipup

[@connorwalls.]

That’s what I was thinking

[@zombieglicher1151]

Came here to see if anyone caught it as well! Congrats Robbie!

[@a.oakley983]

Totally caught that too! First thought was he bought a ring😂

[@NovaZocket52]

I thought I was the only one who thought this, I think they’ve been together for 7 years too saw it on Courtney’s Instagram

[@regxiee]

Happy New Years everyone. hoping for everyone to have a better year.

[@Tanuem]

There is something so satisfying about painting something entirely gloss black.

[@MacKenzieKissell]

Let’s get the wheel wells painted black too! Wow would it look even more clean !!! Not necessary but totally necessary for the OCD! 👍🏼

[@Ghostacc956]

That looks amazing, I started to sand my engine bay but thought it was going to be quicker than it was and I got busy with work. this gave me the motivation I needed to get back to working on my dream car. I already pulled the engine and transmission but in the meantime of saving up for the new swap I lost a little motivation.

[@MJ-qc1kw]

A common thing to do is hold a plate of brass behind the hole, and weld around the edges till the hole is filled. The brass doesn’t stick to the rest of the welds and it is much cleaner than the plates on the back.

[@loganc2068]

When you said cortney wanted to help sand it reminded me of a time I was sanding my old 98 coupe and i had a few friends over and one of their girlfriends started helping us sand it. Bro the whole half hour that she was sanding for she was sanding the mint condition plastic/rubber door trim and not one of us realized till she was "done" 😂😂😂 lesson learned that day. Always keep a close eye.

[@tru_society_2132]

“ please don’t mess this up “ with a 🥺 face. Had me rolllling 😂

[@EzENerde]

Dude Courtney helping you was so goalsss. That engine bay looks sick though, keep up the good work!

[@viktorkocev2454]

Idk how you have this much nerves to do things like that. The genesis paint process was long asf too and you took like a champ with no serious complaining and whining. Such a madlad keep doing what you like and desire.

[@rubennoyfb8262]

Dude you're vids are never boring!!!

[@kainine09]

Why does it look so good!?!!

[@dallas4616]

I was literally sanding on my car and decided to take a break, and see a new video from u and ur sanding too

[@absolutegarage9425]

I love the honda content cause we can afford it, I just wanna come work on cars with you

[@URBANBACKSTREETGARAGE]

agreed ;) most of my favorite youtubers have gone supercar route ;( makes me sad,,, im a broke ass hoe and i have a mini with a b16 vtec and my honda civic saloon eg doing k20 conversion, good fun builds ;)

[@RobertLiggett]

Where do u get the rust paint I need it so bad but I'm in America 🥺

[@Chong1975]

He's in America too buddy. Canada is part of America. He most likely bought it at Canadian Tire, but any good hardware store has similar stuff.

[@RobertLiggett]

@@Chong1975 thanks

[@dannylongstreth4868]

Hey can u let me know what paint u used??? Looks great on camera

[@DEADLYORACLE]

Yeah some guy commented on the video of bondo on either the hood or the fenders that mixing it on cardboard was bad because of moisture and it absorbers something

[@Blazes2much]

As someone who bought an ek right around the same time as you, this is hype. Mines my daily so no tear down but I love to see this. About to start tearing down my del sol to try to make it nice.

[@callumclatworthy1388]

This car is going to look insane when it's done glad to say I've watched it grow

[@simon9548]

What type of paint is that? I need it!!

[@Martin-py4kx]

I agree with the bondo guy. Cardboard can soften and some fibres come loose and get mixed in the bondo, then you'll have small bubbles

[@fryreartechnology7611]

What kind of paint was that again? It looks great and I’d like to paint my truck with it and see how a brush did it that’d be so much cheaper too. Got an affiliate link?

[@rozzati2452]

Dom 16 rust prevention coating sadly they only sell it in Canada

[@fryreartechnology7611]

@@rozzati2452 .... well poop I live in Arkansas.

[@aaronk4241]

Isn’t por15 basically the same

[@Luvugil]

Loving the content Robbie, keep up the GREAT work!!

[@Tylertheboss13]

Hey Robbie im from Owen Sound Ontario, in the summer if you want some video's I am working on my 2012 Evo X and my 2001 Lexus is300, both already slightly modded

[@newbeginnings6335]

Very satisfying video.

[@sweis12]

When sanding why not use a die angle grinder with a rolloc adapter?

[@JakeWheeler]

Hey Robbie. Loving the Dedication lately. Keep it up. As a long time viewer seeing you on the grind always gives me a huge motivation boost to tackle some of my own projects. Thank you.

[@jordynvaughn8012]

Been loving these civic videos. Makes me wanna get one myself

[@URBANBACKSTREETGARAGE]

do it,,, u will not regret it, im doing k20 build on mine, il be sticking it up on my channel with my vtec mini, hondas are great, reliable and hella fun

[@judeelliott-james5466]

That's really good like on camera it looks exceptional

[@chasingdawn8635]

DAYUM. That work paid off. It looks A MAZ ING!!

[@mostchilldude]

that paint leveled amazingly

[@RiyaanMoosa]

It's looking really good Robbie! I know exactly what you mean about the video's I've been filming a lot of prep work and it makes you feel like people are going to get bored of it. Just know, most of us are here to watch you and kinda "hang out" and that's why we're here.

[@NovaScoria]

Looks great

[@djsmgp]

The amount of effort you have put into this build and your past builds man, you should have way more subscribers.

[@boosted_john]

That’s looks really good! What you’re doing is totally worth it. I regret not spending more time on my engine bay.

[@absolutegarage9425]

Just a tip tho put tape at the end of your spatula thing and when your done it's easy to clean

[@garethmeagher3424]

it looks sop good robbie great job

[@merlincantrell8546]

make sure to use SEAM SEALER on the back side of those tabs!!! they'll rust apart anf trap moisture otherwise

[@bingchilling5116]

This civic is gonna look awesome when its done!

[@waltervasconcelos3441]

Looks great Robbie!

[@Ewan300]

Fire! Great to see the progress!

[@hondaprelude8000]

Can I see a now picture? Looks dope

[@jordanalvarez7416]

welp. love this so much that i just bought mysel some of that paint to do my engine bay! Thanks for the idea bro

[@SolarTara]

Since he will never reply, do you have any update on how that paint worked out for you? It's not temp resist but it's a rust prevent and rubber undercoating so I'm curious if it can withstand the bay

[@jordanalvarez7416]

@@SolarTara worked great! I made a vid on my channel with it too

[@SolarTara]

@Jordan Alvarez wicked ill check it out! Doin my 2.5RS swap with it then for sure ahhaha. Thanks for the reply

[@adamshivnan9642]

Tbh loving these videos at the moment super chill productive and over all good to watch, honestly this man in 2021 🚀 hes going places on god!

[@retoro-ramirezz9739]

Happy New Years Robbie

[@izci7489]

I love this series 🔥

[@Chuckulumboosie]

Quick question! What’s the name of that thick engine paint you used?

[@mrtnmaker6281]

I think it is DOM 16

[@URBANBACKSTREETGARAGE]

engine bay looks FIRE!!! hope mine turns out this clean, i might fill loads of holes to now looking at how good this turned out!!!

[@ZayedGR]

witch paint you used

[@PeaMusic]

You made the right choice with that brush on paint. Thick, looks clean and really shiny considering..

[@jppf91]

Is there a link for that paint?

[@simon9548]

I also want it

[@patrickpaul4901]

There’s no way you haven’t realized you filled the upper control arm holes yet. Especially after going between Jasmine and the Ek.

[@demanibrown6762]

😂😂😂

[@brandoncrider3697]

The ek doesnt use those holes, the ek bolts through the side of the strut tower not the top.

[@Yourdadslover291]

They’re on the side.

[@spaceonix_5882]

Use Raptorliner for the underbody and wheel wells. Jimmy Oakes has some good videos on using that stuff.

[@mataskomliauskas4154]

Happy New Year everyone!

[@TheOnly_KRYP71C]

Hey Robbie, not sure if mentioned yet, but you molded in the upper control arm mounting holes on the shock tower... aside from that, fantastic job dude.

[@TheOnly_KRYP71C]

I retract, just realized the mounts for uppers are on the side with ek's

[@jasonbuben7787]

Will u do a video showing how durable that paint is. Scratches and heat

[@MrPhilllyD]

You right about the mixing board. When your using filler it pays to buy a more reputable brand filler, it sands much easier. Another trick when dealing with filler is green sanding. Put filler on a smaller area and sand with 80 grit before it is hard, the filler will sand quick and come off almost like balls.

[@OwenBuckingham11]

Didn't see my package yet but it's in the mail!

[@assassinssheep9171]

does anyone know where i can get similar paint in germany?

[@a.oakley983]

Looks so good!

[@ernestonevarez1276]

I liked the paint it is a lot better than it would have been if it were spray painted. Good job on listening to your gut Robbie!

[@Insane98]

8:40 I spotted a flock kit. You thinking of flocking the dash?

[@isaiahk.1619]

He flocked the dash of the brz but still possible that he will do it again, because its kinda easy and affordable

[@Insane98]

@@isaiahk.1619 I know, but he likes to show easter eggs

[@nejlepsicloveknasvete]

BRZ does have flocked dash I believe

[@absolutegarage9425]

Also I'll have a little something I'm sending for the hot wheels

[@RaphaelRac]

Hey Robbie i was wondering if Brad will Upload Videos in the next time or if he doesnt do That because he has no Place to Film the Videos

[@ariannatorres5154]

Agreed. Sanding is the worst! I once had to sand the entire first floor of my childhood home and all we had was a hand sander it was bad 😂 I think about it every time I’m sanding my car

[@ariannatorres5154]

I’m taking a wire brush to it idgaf

[@Phiz67]

was waiting for that one :D

[@onlyxcaleb787]

YESSS PAINT FINALLY!! Happy New Years Committed Crew and Happy New Years Robbie!! Hope everyone has a great New Year!!

[@PeterPan-cz2yi]

Bro that engine bay looks so dope

[@timmyb2507]

Looks great man

[@TheNinjaMonkey43]

I feel like you should just use that frame paint stuff on the whole undercarriage, no rust no fuss

[@ralliart_jerry6968]

I’m trying to find it anyone know the name

[@rozzati2452]

@@ralliart_jerry6968 it’s dom 16 rust prevention coating sadly they only sell it in Canada

[@ralliart_jerry6968]

@@rozzati2452 i live in Ontario luckily

[@Mf.B_rad]

it looks so dark i love it

[@robertnelson3734]

What brush on paint did you use. Looks really good.

[@luisrodriguez8973]

It actually looks so good man, I really like your videos I’ve been a fan since u build jasmine much love and prayers bro

[@yamilmelendez2667]

I really dont mind u using that black rust paint cause it looks sick

[@paulmartinkunnapuu9542]

Does anyone know what the song with the “i dont understand why” lyrics is called? I know Robbie said before how he uses royalty free music from somewhere but would be nice to know exactly what this one is.

[@michaelpops3456]

kzbin.info/www/bejne/f5rKaXathZVjoJY

[@accipiterd]

Nice work! Coming together now

[@hapz835]

YOOOOOOOOO Love these videos so much Robbie! Keep the videos goin!

[@itstrulyj4898]

shes gonna be hella clean

[@TotoGeenen]

Daaaamn are you putting a lot of effort into this. *MASSIVE* props bro!

[@sebastianolsson9063]

After the last couple hundred amazing videos I'm expecting this one to be just as good. Stay committed on doing your thing!

[@cba360]

The mixing trays I use are called onion boards, peel layers off each time you use it, cardboard absorbs stuff out of the filler. I used cardboard for many years without real issue tho!

[@marcusalmeida4]

Looks sick

[@stephendowney4930]

Keep your ppe on be safe.

[@trapper-orbiter6284]

Are you only going for new in box Hotwheels? Been debating on going through my old stuff but not sure that's what you're looking for.

[@Ky7e_e]

Courtney is a keeper👌🏽

[@phattony9057]

Yes u got them right on looks like I'm the winner of the hot wheels haul u got in the video today mine is the first bunch of cars on the left

[@dereklutz6757]

whats the name of the stuff you use with the brush kinda want some for my coupe engine bay

[@JaggerRambus]

its crazy how good that looks. I want to try that stuff on some parts

[@georgegarbett205]

High polished metal or chromed pipes, fixtures and fittings will look killer in that engine bay now 😍 hard work always pays off 😁

[@MazerDavid]

3:18 "Cortney wants to sand, I don't know why" she see's you working on this and she cares so she wants to help and make it a little easier for you. It's what couples do.

[@import_loyalty508]

I’m hyped to see a new Honda on the channel and can’t wait to see what aero this bad girl will get

[@jbettencourt978]

What paint is that?!?!?!

[@thatdude8454]

You can use cardboard as a mixing board as long as you put something like wax paper over it

[@gaming_and_reality1018]

Its amazing

[@jameshammond5320]

Looks good man . Good work 👍

[@ralphdavilmar1302]

The paint looks great on video i can imagine how amazing it looks in person

[@Mexicanracing]

What paint is specifically ? Got it dom16🙏

[@jaluna06]

Wow. That actually looks amazing. Great job. Love it.

[@malcolmnovak6181]

Love the work man!! Paint lookin hellaaaa hood

[@darksidevenom6]

You should get yourself etching primer for when sanding