I LOVE THIS THING ITS ONLY $12 // Pan Tilt 2 Axis Camera FPV Gimbal

[@PacificNorthwest360]

It’s 1:45am and I’m watching FPV stuff 🤓🤫🤗 Olympia WA

[@77dxr]

Good stuff. There are some videos of these in auto gimbal / manual gimbal and also head tracking but no tutorials to be found. A tutorial video showing how to set it up in both ways would be excellent 👍

[@irondan357]

I basically reverse engineered and minimized this thing to fit under my 460mm lifter quad. It gets a lot more low profile if you flip the pan servo and recess it into a frame plate

[@LongusFPV]

Use it with a headtracker! I know my skyzones have a headtracker built in, but i still haven't figured out how to use it, cable does not fit to my qx7 trainer port, but it's a ppm signal, so it should work. Probably not with the flysky.

[@gyrozeppeli680]

does this come with the controller to control the pan and tilt?

[@jenkins0009]

Great video. Looks like you're limited to 90 degrees of rotation too. Any idea how to get the full 180 degrees? Thanks

[@lokofpv]

You just need to solder two 2.2k resistors to the potentiometer. There are some videos on KZbin about it.

[@thebarronflights]

Hi, I have just bought this. I want to mount a go pro. Do you have the file for a 3d printer please?

[@Matraxea]

Please get a head tracker that will plug into your trainer port on the radio and have it head track a camera for 'VR' FPV.

[@bhushansirsat169]

Sir which software or code u used for tilt system we are the fresher's sir help us sir

[@TheAngryAstronomer]

I prefer the small fibreglass ones as they're a bit more compact but they're getting harder to get hold of now. Been using them for a while now on my scale FPV setup for use with head tracking from right inside the cockpit. We even ended up using them in a TV production and they performed flawlessly with the Turnigy 180 degree servo for the pan and a regular 90 degree one for the tilt.

[@matthew04101]

i'm looking for pan/tilt system. what small fiberglass pan/tilt system are you refer to ? or if you know a good compact one .

[@moreality7719]

thats exactly what i was looking for my self build racedrone project... - thanks bro!

[@christopherh6196]

What remote control transmitter and what receiver do you use to pan and tilt?

[@spencerboaz2385]

I ordered one but didn't see it didn't come with the servos , I hope the 9g servos I have will fit .

[@HotPocketFPV]

You should stick this on the mini Ar wing and get it set up for long range!

[@MCsCreations]

Dude, that thing in a wing or rc car would be fantastic! But for the FPV camera, not the HD one. 😉

[@TheUnderMasked]

Wheres the fallow up videos?

[@rcpete7055]

Am very upset the wiring diagram on the mini mamba 20x20 stack is labelled wrong? Can you check please before more people break there leds.. Rsvp

[@DroneMesh]

Yes I'll check the ports and make update video

[@rcpete7055]

@@DroneMesh on one of the diagrams it's led, 5v, gnd but on the other its reversed in the picture gnd, 5v,led?? It fried my led strip that came with my geprc frame and I can't get a replacement without buying another complete frame.. Please check and let us all know about led layout on mamba 20x20 stack??

[@RexSmithII]

For the pan is there a way to go 180deg? I don’t need the top part so it shouldn’t hit any servo

[@MrFadjule]

"I just come here and play with it when i'm bored" LOL

[@daich]

Add some head tracking to this!👌🏼

[@TrentTationnaiseXization]

What I was thinking

[@Thuban06]

Did you ever get around to designing the mounts that would allow us to use other cameras to this pan and tilt? Link to the thingiverse files would be great!

[@holaperrito2554]

Do you by chance have the 3d printer camera mount files?

[@luna95alan]

Been rocking that since 2013

[@msmolly3082]

Great idea. I can think of several uses not camera or drone related.

[@matthew04101]

I want to try to put this on a 4 or 5" quadcopter frame. do you know which frame would make the job easy ? I also want pan/tilt system 2inches back from the nose.

[@unknown.7665]

1:40 I need this frame do you sell to me? ( I am from Tamilnadu, India) Hels how to do this??😅

[@John-3-9]

What camera can fit on it

[@pilotmiami1]

Thenks

[@M0rdH0rst]

I've used one of these on a plane with a head-tracker. Looks funny on the ground because the camera "behaves" like a human :D

[@DroneMesh]

Upload a vid I want to see it..

[@M0rdH0rst]

I'll have to dig it up again. It was a quite heavy Bormatec Maya, really build to be a drone. It flew like a bus. I broke something and put it aside 🙄 A head-tracker demo should be possible. After that I was fully absorbed by multi-copters 🙂 But I'm already planning to build another plane for this, most likely a classic biplane, I love biplanes 😊

[@krul23]

so cool !! i was looking for this! thanks bro!

[@markwood9751]

Did you ever find or get the usb cable for that tarot gimbal?

[@DroneMesh]

No I bought a million cables online none fit :( If you ever find one let me know

[@tamarathompson9418]

I bought one of these like a year ago and i just can't be bothered mounting it yet . I was just going to mount an fpv camera on it

[@M-H433]

Why buy it then

[@maxmeyers771]

are there any cameras with this that have zoom?

[@TheMadmacs]

you should hook up the motion sensor to fatsharks so you can look around ... i would love one of these for ride alongs... dunno if you can have two vtx's burning so close together.

[@pepper8048]

I’m actually completing a build that incorporates 2 head tracker gimbals, with 2 cameras on each gimbal. I also figured out how to have an upward facing camera that is available to both Pilot and Co-Pilot. It is possible, but more than a little tricky.

[@TheMadmacs]

@@pepper8048 so cool, people will love that.

[@rakhikulshrestha2835]

I love you bro

[@choppergirl]

I got mine today, it arrives as two little baggies full of little parts. No instructions. Haha. I suppose if you were a teen use to assembling model airplane kits this would be a total snap and fun to figure out how it all joins and puts together, but my vision is crap so... yeah... all these tiny small parts like the axle pins, it might be an unnessary nightmare. I just want the tilt function so... I guess I pick and chose and build only for that. Now that I think of it, a better method for me might be to get a second DJI camera, and have one pointed at 0 degrees, and another at 45 above it, and then with a tiny relay, switch the video line feed line between to the air unit while keeping both powered on. It could be done with transistors used as switches instead of a tiny relay, but i'd have to design a tiny circuit board. How to make it talk to a servo pad tho on the nano crossfire hmmmr.

[@dallozinsk7773]

Pixy2 with pan-tilt

[@TheUnderMasked]

Where is the installation and setup video? :(

[@choppergirl]

We don't need pan, in fact pan is a liability, we just need tilt. 0 to 60 degrees up for the main DJI air unit fpv feed camera. Connected to a crossfire nano extra breakout pin. I'll throw my money at you. I'd kill to set this up on a switch to flip between 0, 30, and 45 degrees uptilt... and it seems so simple to do. It's just a servo bound to a channel. Maybe this will be my first fpv product for quads.. so bloody way overdue. Ordered mine, lets see how I can mod this thing and lose half the function and half the weight. I think the nano has two/three extra pins to direct drive two/three servos. Correct me if I'm wrong. I absolute dread soldering on those little bastards though... air-war.org

[@aarrodri]

I'll pitch in too..

[@adrianharding8023]

You can get these on ebay for less then that, they are rubbish anyway because you will twist your cables with one an it won't last long you need sliprings

[@flat-earther]

have you found something better

[@adrianharding8023]

@@flat-earther you need sliprings

[@bennieleip579]

Good for the rc car to fpv it 👍🏻😆

[@MCsCreations]

Absolutely, dude! In a crawler, that goes slow and over everything, that would be awesome! 😃

[@MCsCreations]

Absolutely, dude! In a crawler, that goes slow and over everything, that would be awesome! 😃

[@dronereviewman9580]

I think for 12$ its really cool÷!! 👍😀👍

[@nadoushkaautaibi376]

Amazing

[@alexandre5000ify]

Legal

[@DarylS]

how do you power it?