I made a 4G LTE antenna (1800 MHz) with my own hands. Internet works!

[@lebecky_restoration]

* Thanks for your comments! *

[@chrisshr5383]

Cual es la fórmula para una antena de 900 MHz?

[@irschn1671]

@@chrisshr5383 kzbin.info/www/bejne/joW3dmupnd-CnMk

[@milanoblak4416]

​@@chrisshr53838:49

[@barnabemiafouna1645]

​@@chrisshr5383❤❤❤❤❤❤❤❤,,,

[@p-miner5505]

stop fooling people lol

[@Derrick6162]

Enjoyed the build. Very ingenious...

[@QTechman]

Hey Man i like you video to get a 4G LTE connection, it is not logical that it would work without the SIM card being activated Thank you

[@lebecky_restoration]

Hi! Thank you too my friend!😉

[@jemcommunications]

You need to isolate the driven disk ie 2nd largest from the boom orherwise your vswr will be way off , itll esp effect your upload speeds

[@lebecky_restoration]

You are probably right but I don't want to try😀

[@حمودي-ع6ط7ع]

I tri it its very very useful Thank you very much ❤

[@rpuig3974]

Nice Antenna. Good Work ! what metal is that? Steel? thx

[@lebecky_restoration]

Yes, it's steel. It has rusted a little in two years, but the antenna works properly.😉

[@ManishKumar-z9h7c]

Can u tell about range of this anteena? how many area covered with this and how long range this anteena catch ( in kilometres). How to use it on My Tenda N300 Router please explain briefly please.. i need this

[@DanielChavez-bh]

Yo las hago de Aluminio (Al)

[@cocobrujo264]

@@DanielChavez-bhy Que tal funcionan en aluminio?

[@reynaldopozomora9213]

Make it of aluminum Is very better, because do not oxide so fast AND work very good

[@samirzahraoui9555]

salem Thanks for this awesome antenna for the 1800 MHz frequency. I noticed while watching the video that the S parameter was 13.6. However, when you took the measurements with the slide rule , the S parameter was 10.3. The same goes for the second feed, where the S parameter was also 10.3. So, I'm wondering if the S parameter is 10.3 mm or 13.6 mm I need the answer because I made one based on S=13.6 thank you

[@lebecky_restoration]

Hi friend! Everything is correct, it should be 13.6 mm. On my slide rule 0 is not from the very beginning and that is why it seemed to you that there were 10.3 mm.

[@conordia6906]

cool, thank you!

[@MGG-]

hi great video, i have one question what's the name of that adaptor at the end that connect the coax to the smaller plug on the usb so i can find one at internet?

[@AliOpridai]

TS9 male to SMA Female converter

[@AliOpridai]

but it depends on which device you have

[@victortellez5288]

Más falso que las promesas de mi ex

[@hadfire1130]

Thanks bro ❤

[@lebecky_restoration]

😉👍

[@saeedbahaj5568]

thank you so much ,,,, can u please send the 800 MHz design ? or how it's calculated ?

[@lebecky_restoration]

Hi! Please google translate this article - 3g-aerial.biz/4g-lte-uhf-antenna . All sizes are listed. I think it will help you!?👍

[@saeedbahaj5568]

@@lebecky_restoration thank you so much again ,,, will check it 👍

[@Bob-Martin]

Hello. I want to know how many millimeters is the thickness of that metal? I need to know

[@lebecky_restoration]

Hi! The thickness is the same as a coffee jar😀😉

[@Gigadrain-gw2zl]

Btw you use what metal? alloy or zink?

[@lebecky_restoration]

I used regular thin steel.

[@Boabeaty]

Quel métal utilisé pour les disques ??

[@lebecky_restoration]

I used regular thin steel. After the winter they were covered with a thin layer of rust.

[@AD4C]

Why two F connectors instead of just one ?

[@alredza7366]

Do you need any lightning arrestors?

[@lebecky_restoration]

No, I didn't use a lightning arrestors! Nothing happened in 3 years😀

[@davosam1968]

What size of Threaded Bar you use 6 or 8?

[@lebecky_restoration]

8 mm

[@robertpaws]

Hi, should i make 2 of these if my router has 2 antennae and suports MIMO?

[@Itsme-i7x]

No 1 is enough

[@lebecky_restoration]

I also think that one is enough👌

[@elvicenfa1057]

what kind of cable did you use?

[@lebecky_restoration]

Hi! I used coaxical cable, 75 Ohm!

[@besttv7769]

Hi thanks for the video i have a question do we need to isolate the 2nd disc from other part ? Also can i use zink disc ?

[@lebecky_restoration]

Hi! I made all the wheels out of metal

[@hseautomaticien]

Monsieur , s'il vous plaît.... Est que tu as isolé l'un des disque ???

[@chrisshr5383]

Se puede fabricar una antena del mismo modelo al del vídeo pero de 900 MHz 3G wcdma y 1800 MHz 4G lte?

[@lebecky_restoration]

Hi Chriss! Try to make such an antenna drive.google.com/file/d/1t-iVfLMBrdHJc2JidAOBmitwJgcWZ_j0/view?usp=share_link with such characteristics: docs.google.com/document/d/1o_XG_gQCe4LwpyfhIWduAKW2a8Z8mHU_/edit?usp=share_link&ouid=114692681563419485154&rtpof=true&sd=true

[@selokakamel8351]

thank you

[@aboyhya612]

does it recive only 1800 MHz?? how do I modify it to receive other frequencies like 2300 and so on

[@hamidmehboob253]

Brother, what material is used on the plate in this antenna? Plz reply

[@lebecky_restoration]

Hi! I used thin steel like coffee cans😀 Everything works, just a little rusty

[@ayangogoi7576]

Can we make it from aluminium sheet??

[@lebecky_restoration]

Maybe?! I just didn't have aluminum. I made it out of thin metal like a coffee can😉

[@victorcandia4622]

como la calculo para 2600 mhz?

[@احمدالمصري-ر7ج9ز]

هل من الممكن عمل الأقراص بالمقاسات الموضحة وبها كسور من الملمتر تقدر بالميكرون بالادوات البسيطة الموجودة بالفديو الفكرة رائعة ولكن التنفيذ بهذة الأدوات البسيطة للمقاسات الدقيقة صعب

[@drgrunn174]

You make the best you can, and it works depends of that you make. Let's say the discs are not true - it will amplify probably 10% less. So instead of 19km the range will be like 13km. Still not bad for metal that cost $5, right?

[@flstudiomobile2]

Can we make antenna with others design?

[@mahdiaspanani8004]

What is the type of iron?

[@lebecky_restoration]

I made this antenna from regular steel! After a year it got a little rusty but it works fine😉

[@ronaldinhogamer8936]

To boost ur upload u probably need to change the BAND in ur modem, stop using 4g pendrive, try tp link-mr 6400 v5.3 or tp link-mr 600, i think is the best buy

[@davosam1968]

Can I use f connector on mr 600 without any converter?

[@mahdiaspanani8004]

Has anyone made this? Does it work?

[@techalex1992]

This is 4g+, right? aggregation

[@Awais_Zehri]

Can i use food aluminium tin for it

[@lebecky_restoration]

I haven't tried it, but I think it should work

[@salimzerrouki1927]

Can i use it at 15km?

[@saeidashour5234]

4G LTE

[@ZINYAR_Gamming]

Bro plz reply bro which plate material use name plz

[@lebecky_restoration]

Hi! I used thin steel like coffee cans😀 Everything works, just a little rusty

[@yurendavidmendoza5511]

Cd is disk hard?

[@abdallaalbloshy5827]

Shouldn’t you separate the second disk from the other disks and the bolt?? Also did you try to put it in a satellite dish??

[@lebecky_restoration]

You don't need to separate the second disk. This antenna finds the signal from the tower at about 9 km.

[@radouanem6934]

The name of the material used

[@lebecky_restoration]

Steel

[@seamancardno]

May i ask, what type of connector u are using in the reflector disc, any tutorial ? Can u send a link?

[@lebecky_restoration]

Hi! I used this type of connectors: 1. alii.pub/6o84wi 2. alii.pub/6o84xa 3. for modem alii.pub/6o84xv

[@نضالالعقلة-ك9ذ]

هل يمكنك ارسال النموذج والقياسات والتصميم❤❤❤❤❤

[@adnan-usman-1]

Isolate the second element from the rest of all !

[@davosam1968]

Did you get better results doing that?

[@adnan-usman-1]

@@davosam1968 before that I got -94dbm but after that I got -80dbm on my Huawei B310s 927 4g Lte Device.

[@davosam1968]

@@adnan-usman-1 second element is the second biggest right

[@abdoamin6635]

هل يدعم تردد 1800

[@lebecky_restoration]

Yes!

[@p-miner5505]

lol

[@Gigadrain-gw2zl]

Do it for me 😁 please 😊

[@lebecky_restoration]

👍😀