I made a complicated SIMPLE TOY with DIY injection molding.

It is possible to make injection molds using a resin mix. I don't like using 3D printed molds directly, for reasons of weaknicity and brittleness. (This may change when that Siraya Sculpt resin comes in.)
**** BLACK FRAME glitch at around 16:19 due to render error. Was not able to re-render and re-upload in time for a Sunday release. ****
I make videos every week, thanks to direct support.
If you would like to help Steady Craftin keep on going (and receive some extras too), please consider becoming a direct supporter here:
TIP JAR
paypal.me/steadycraftin
PATREON
/ steadycraftin
MERCH
shop.crafnation.com/
FACEBOOK
/ thecrafsman
INSTAGRAM
@steadycraftin
GEAR I USE:
CAMERAS:
amzn.to/2YbUz5v
MICROPHONE:
www.adorama.com/RDVIDMICPP.html
LIGHTS:
amzn.to/2MnPMew
TRIPODS:
amzn.to/3iFlro7
METAL MOLD BLANKS:
www.techkits.com/collections/...
INJECTION MOLDER USED IN THIS VIDEO:
www.techkits.com/products/mod...
(Injects up to 1 cubic inch shot size, or close to 18 grams. I check my models in a 3D slicer to determine the shot size before proceeding with making the mold.)
MOLD MAX 60
(Red heat-resistant stuff I showed, usually for metal casting. I prefer OOMOO for 3D prints.)
amzn.to/2MhOOAD
OOMOO 30:
amzn.to/3iHgTNP
SMOOTH CAST ONYX SLOW:
amzn.to/3c5taun
CABOCHON MOLD:
(For making the clear epoxy domes/visors.)
amzn.to/367p8hf
ELEGOO MARS 2:
(My Elegoo Mars is still running. But this one prints WAY faster, which helped tremendously with this video.)
amzn.to/3sOU7bA
ELEGOO WATER WASHABLE 3D RESIN:
amzn.to/368l0gW
ELEGOO WASH AND CURE STATION:
amzn.to/3qN7vLr
AFFILIATE LINK NOTICE
“As an Amazon Associate I earn from qualifying purchases.”

[@TheCrafsMan]

Steady Craftin videos are made with the help of DIRECT SUPPORT: www.patreon.com/steadycraftin (You'll also get access to the printable 3D scans of my original sculpted figures, MP3s, exclusive behind-the-scenes videos, shop discounts, and more.) My family and I are so grateful that I get to do this.

[@thabangmnguni6539]

,❤

[@ikitclaw3299]

This mans voice sooths away the pains of the day

[@sonichujfs2393]

Nothing like breakfast and crafsman on a Sunday morning

[@adhmbcx]

(nice boat)

[@CrazedGamer117]

Or work on a Monday for some.

[@liammcbillybob1251]

Nothing like dinner and crafsman on a Sunday night

[@thereforepie7531]

A small world it actually is.

[@thereforepie7531]

Holo

[@sillypengie2052]

Crafsman is over here helping calm down my anxiety.

[@Toastedtasty42]

He's really got a way of doing that.

[@masgaz9748]

the southern accent and calm demeanor makes the perfect combination

[@matambale]

Truly amazing how the rest of the world fades away like that, long enough to appreciate this wonderful artist, teacher and gentleman.

[@Ddigzdirt]

I consider him my personal therapist 👍

[@icarusalchemist1398]

If you want to really calm your anxiety, change the speed to 0.75x and take life slow, it makes the video last longer too 😉

[@sicarius0248]

"Craftsman, you making a mold-mold?" Das correct. This guys voice is hilarious

[@lharper8820]

Why not 3D print a mold for the mold?

[@TheKatknip]

Idk if it sounds weird, but your voice helps me fall asleep!

[@TheCrafsMan]

My man, thank you. To know I'm of a help like that to someone is a big deal to me.

[@NorahIK]

No preasure pot, just a tooth pick and a friendly negotiation with the bubble ❤️

[@Clockworkbio]

Crafsman and Sunday morning. Name a more iconic duo.

[@CStrbel]

Ha! Nice try but you can't fool me. I know a trick question when I see it.

[@tenchuu007]

One of these days I won't fall asleep watching one of your videos. Not because they're not interesting, they always are and I re-watch them afterwarda. But dat creole drawl just got me sleeping something good.

[@Ralvik]

Crafsman I gotta say even though injection molding is far out of my price range, every time you make a video you inspire me to work on my art even more. Thanks for being always being a beacon of positivity

[@adammakarzyk3274]

Makin crafswork does cost money. I will say this, I used to do this sort of work (my younger days), but this is what I love. Still is inspiration, nothing but love to y'all

[@philtmonx1446]

You have been one of the few constants and non threatening pleasures this last year. You have allpwed me escape from fears from being overwhelmed and upset. Thabk you for bring us on your ride and thank you for be such a great conductor and engineer.. What a fabulous trip you take us along with you on.

[@adammakarzyk3274]

Keep on crafin my friends

[@MizusSparkles]

I'm new here Crafsman. So glad we found your channel. My husband and I like to make stuff and we love your style. You make us laugh teach us and inspire us.

[@biggafigure8575]

Welcome to the addiction

[@MizusSparkles]

@@biggafigure8575 It really is lol. Going back to catch up on his videos and loving it.

[@rupertkingsley]

Going to have a friendly negation with the bubbles - so peaceful

[@matambale]

Today I learned the fine art of Bubble Negotiations.

[@UsernameHere51]

I love these videos, almost no sound effects or music. Just his soothing voice and a project

[@stopcryingalready]

"CrafsMan you makin' a mold.. mold?" blew air threw my nose on that one 🤣🤣

[@hardlinebdg]

crafsman, i wanna thank you for your video about square breathing. it really helped me a lot during my days lately. i know you won't notice my comment since a lot of comments going in but still, thank you so much, now i can control my anxiety and stresses. god bless you and your wholesome crafsfam. love your work!

[@BullitTonyCustoms]

This is one of those incredible channels that you just happen to find one day.Thank you crafsman subscriber for life brother,love finding stuff like this😎

[@ynnej001]

🤩 Crafman that character is awesome! A TRUE Crafman make things to use supplies on hand.

[@DoesNotInhale]

Crafsman, the Bob Ross of 3D printing

[@BrianReindel]

At first I thought Crafsman why not just use your 3D model and pay a company to make a metal injection mold you can use to make thousands of injections... then I looked up the cost... Crafsman is not made of money.

[@heyimcala6566]

Crafsman it's a big inspiration for me, every time I see his videos it helps me to just relax , empty my mind and start being creative after a really hard day of work

[@TheCrafsMan]

So happy to be of help! Thank you!

[@daftpatience]

oh man, watching the little white robot guys made me really happy - the sound and bounce really gave me nostalgia. gosh i love rubbery plastic toys. happy stim!

[@ravendarkcloud]

There is just something so calming about hearing CrafsMan talking. We need some story time with CrafsMan to simplify those stressful days.

[@JackTheNews]

Crafman, I've recently found your channel and have binged nearly every video. I've never made crafts outside of some seasonal things but I find you and your process so relaxing an interesting. Thank you so much for what you do, you are fantastic.

[@gabriellsbaby]

This man makes the best quality videos, interesting content, he is funny, sweet, kind, this is the best example of great You Tube content. I wish there was an academy award for videos that had the best heart made by really smart people, he would win over and over again. Thank you sir.

[@hungrysparrow]

Thanks for clearing up the aluminium/pewter mould idea. I was wondering why you weren't trying that. Makes sense now.

[@muccia7328]

I think these are the most unique videos I've ever seen. And the amount of work and skill that surely goes into them? Hats off to you Crafsman!

[@JasonP6339]

I hope the Crafsfamily is aware of just how much you mean to the internet family you've built. We love you and the whole family Crafsman! You quite literally have tens and tens of thousands of people waiting with bated breath every Sunday for a video release that we each know is going to make the rest of the week to come. Your voice and mannerisms are a tonic for just about anything that ails you.

[@ActuatedGear]

I gotta say my dude, I love the use of the 1x2x3 block for pressure distribution. That was beautiful.

[@sethusk]

I love this character, it's super cute with the faces inserted.

[@onidaaitsubasa4177]

Yeah, they're great, they would be really popular if they were in stores, especially with kids playing Among Us cause they sorta remind you of the game, but they look more cute.

[@deepjoes1072]

If i had only one word to discribe your work and your channel in gereral it would be UNIQUE

[@UncleJessy]

Oh man you answered my big question I’ve had for a while. Why not use resin prints directly in the injection mold

[@MaxSMoke777]

Sounds like that one resin might actually do the trick. We'll find out shortly after he does.

[@TheCrafsMan]

Hey Uncle Jessy! Mannn, I think it is possible, but not with the standard resins. I'm pretty excited to try the Siraya Sculpt! Also, the size of the details make a difference. My resin molds break easily at those little peg areas, but if you're molding a more organic or smooth object, with larger details, I bet you could get several shots out of it. And embedding it in a metal frame should take it even further. Thank you for watching!

[@UncleJessy]

@@TheCrafsMan always excited to see the stuff you’re working on!

[@cdevidal]

What if you 3D print not the mold, but the finished product with air channels and ports already attached? So the opposite of what you printed. One less step to then create the injection mold, lose less definition.

[@anonymousperson1048]

@@TheCrafsMan I've seen silicone molds that are designed to mold things like pewter and such (I think its called Mold Max 60). Do you think it possible to use that instead of the resin molds that you used in this video? The only issue I see with that is that it might flex during the injection process, but might using a metal frame be able mitigate that?

[@vampcaff]

Tinkercad is such a powerful tool for getting started with the design. It'll take you really far and when you can't go any further there's fusion360 sitting there just waiting for you with a smile on it's face.

[@lordfartquadbeanz2002]

Crafsman relaxes me more than my anxiety meds

[@technoe02]

You inspired me to make a mold for my kids toy to fix it. Worked like a charm. Thanks Crafsman! The whole family and I love watching your videos.

[@jazzlehazzle]

For so many reasons this just became one of my favorite channels in the history of time 😄

[@vorbmage]

I just discovered your channel while looking for silicone mold tutorials. I am hooked. You're like the Bob Ross of crafting. Thank you!

[@pavelis3645]

This guy's voice is putting me to sleep bit what he's doing is keeping me awake and interested. I love this feeling

[@lovechunks4756]

The best ASMR channel on KZbin

[@CarlEvz13]

Crafsman you are a genius love your work brother also would love to purchase one those little characters you creat. Anyway stay safe and steady crafting 👍

[@albinoblksheep9231]

Crafman, you're coming up. You keep loving the Lord better and better like you do, talking like you do, improving like you do, and giving us these videos as you can! I like yo stuff and it's a light in my life. Thank you for it.

[@SwitchAndLever]

One reason why parts of the mold also pulled out when you injection molded straight into it is because you have no draft angles on your model. With drafts you'll get much better results, but the mold is still not likely to hold up to all too many pulls either way. [edit] of course you mentioned that already 😄

[@evilcanofdrpepper]

Here is something that both you (Switch & Lever) and TheCrafsMan might want to look into Microwaveable soft plastics that are usually used for bait making. I know it's still pretty expensive however TheCrafsMan might already have many of the things needed for this. Also I think he could just use a standard high temp silicon mold and just pour it in using a glass measuring cup straight out of the microwave. This is a youtube called Marling Baits that tends to use a lot of similar techniques to carve baits. It seems like you all have your own little tricks and secrets that have built up over the years that are specific to what you are trying to do however you might be able to solve each others problems. He has his aluminum molds made by Epic Bait Molds and uses a large hand held injector so it might be worth looking into. kzbin.info/www/bejne/qoiUqqiAorKIgNU kzbin.info/www/bejne/d53Oq5pomNyNmMk

[@mplumer88]

@@evilcanofdrpepper TheCrafsMan doesn't own a microwave. He's mentioned it here and there.

[@evilcanofdrpepper]

@@mplumer88 yeah but he has a plastic injection press and that is a more expensive thing as he can find a microwave on the side of the road or use a gas burner instead.

[@biggafigure8575]

@@mplumer88 I’m awarding you points for paying attention all these years lol

[@TheCrafsMan]

Those little peg areas that pulled out might have held up better with draft angles, but I wonder how small an angle we can get away with and still have the hoses attach firmly. If it comes out of the mold easier, I reckon the hose would pull away easier too. I might coulda went on the low end with a little 3-degree angle. That may have been a good compromise. Learning a little more every day. :)

[@wistyfish9844]

This video was fun. This is what it feels like to fiddle around and make somethin

[@ralphmourik]

Watching Crafsman while taking the supports of my 3D printed Crafsman figurine! 😋 soon to be used as a pattern for metal casting 👍👊

[@schrodingersneko9060]

this mans accent and dialect is for some reason calming.

[@PowersThatBe]

It's like seeing BMO from Adventure Time, but its an earlier prototype. A-Mo(d)!

[@Arkie80]

That little lense over the face was neat. I learned something today. I had not heard 3D Print Resin caused silifone inhibition. Good 2 Kno. Thank you again CrafsMan. Keep on Steady Filmin. We love ya.

[@MandoHalrissian]

CrafsMan be like the father figure on KZbin none of us knew we needed but glad we got, alright.

[@iTzBucK5]

Just started watching this mans videos today, can't stop watching his videos and im okay with that.

[@3DCGdesign]

I like the look of this A-mod character idea with interchangeable face, etc. I would want it to come with the matching magnifying lens piece and a couple of example faces - most importantly the anime eye ball. So glad to see you survived the project, was worried about you since last Sunday LOL. peace and love.

[@evansn79]

I have a plastic injection machine in my studio - been messing with is for a few months and these videos are really useful since i get to see someone else experiment without wasting all my money on non starter uideas.

[@n0bility]

I love the step for removing the silica packet. Made me chuckle.

[@TheCrafsMan]

That was 100% for real just in there. I sorta noticed this lumpy part, and thought something had clumped together (the aluminum powder in the resin), but then noticed it had a rectangular definition to it. LOL!

[@MitchCairns]

Crafsman, one thing you can do to help with longevity for the resin molds is designing a slot to add a metal washer at the injection point. Have a great day!

[@Dukefazon]

That little character turned out real fun! I like the hollow face, reminds me of the movie poster for The Thing :D

[@HollywoodColt]

Best way to end a Sunday with the CRAFSMAN!!!!!!

[@handlaidtracksand3dprinted922]

Wow such a well designed and multi setup little creature! A-Mod indeed!! Great videos!!

[@JohnDoe-cj4gn]

TheCrafsman is AMBITIOUS. Well done alternate universe me ;)

[@thomaslinville2979]

I feel like this is the real Crafsman. It’s been feeling like you weren’t yourself for most of last year. I missed the oh snaps and the random hello! I don’t know what it was but you seemed different and this feels like the Crafsman I came to love watching.

[@TCCR]

You should ABSOLUTELY sell prints of your figure sketches. I would 100% buy a copy of that sheet with all the different figure variations sketched on it.

[@jenniferbutcher8393]

Crafsman, thank you for making a difference. ..I told my son about you and your beautiful videos....he watched some and felt his anxiety drop to almost zero - and he was actually able to sleep. He is a 19 year old soldier in our US Army. He is also a blacksmith and a classically trained singer (opera) who gave up his scholarships to serve his country before his college. He loves crafting...everything from jewelry making to furniture making and running the wood lathe...a true artist like yourself. Hugs to you and the Crafsmama, and we will all keep on steady crafting❤❤❤

[@biggafigure8575]

Do you have a link to his blacksmithery? I’m always interested in helping out those that help us out. My EOD group all watch him as well with similar results and none of them really do anything “crafty”...now some are starting. Salutes to you and your son.

[@hazonku]

Protip from someone older but similar, the sooner he uses that GI Bill, the better.

[@jenniferbutcher8393]

@@hazonku thanks! 😊 Yes, he is almost through his AIT and will be shipping to Germany. He plans on doing college while he's there and then finishing when he gets out.

[@jenniferbutcher8393]

@@biggafigure8575 thank you! He has an Etsy shop and he is on Facebook at Penfield Forge. In his absence, I have stepped in and create for him at the forge and the lathe. He taught me blacksmithing...and I keep the home forge lit until he comes back. I don't make the knives, those are all him. Thanks, and keep on Steady Crafting!

[@biggafigure8575]

@@jenniferbutcher8393 yes ma’am, I’ll check it out!

[@therestorationofdrwho1865]

I’ve got something I’ve been wanting to make a proper mold of and always thought 3D printing it would be the perfect way, because the mold won’t flex. Good job.

[@CatwithaKnife12]

Mister...your voice is so suiting and relaxing and your creations are adorable. Please have a great day

[@tysonvanwagoner57]

This guys the Bob Ross of making! New subscriber inbound!

[@absotivelypawsilutely796]

Always a highlight when you upload! You have such a marvellous brain, I wouldn't think to make all the neat little changes and adjustments that you do, I'm always so impressed with how many good ideas you have.

[@shelleynobleart]

Ok. Hold up. Stopping at 3:35 to exclaim THAT IS GENIUS!!! Carry on... 14:40 again!

[@critmaxdamage9346]

Thank you, Crafsman. A-Mod turned out A-Mazing.

[@duane8620]

This was the most calming, relaxing and slightly humorous and educational video I've seen in a long time here on the YT. Thanks for an awesome video, subbed for more great content.

[@rainbowditto9033]

Morning mr crafsman! This little figure is just so cute! I love the one with the little eye up on him, he's looking out for... Opportunity!

[@ZombieMeeki]

[@retrotechjournal]

Wow Crafsman this is so great. I've really enjoyed following your injection molding adventures. You videos are always so professional and high quality. I have no idea how you manage to do that. It must eat up every hour of the day. It's always treat when a new one comes out.

[@OFB_skates]

Man, I don't know who you are or how you wound up in my recommendations. But I'm sure glad you did! Content, delivery, humor, knowledge....everything is on point. You got another subscriber. Thanks for this.

[@maxanderson9187]

Hey crafsman - we need some sticker sheets of your cool concepts. They'd be cheap to mail and I'd certainly love one or two of 'em on my laptop. Keep on being the great inspirator you always are.

[@thoughtguardian]

I like the little cookies and cream robots.

[@insidious_crow]

I’ve fallen asleep 3 times trying to watch this video but like in a good way. Is this asmr?

[@carolynsaylor8885]

WOW Crafsman!! What a labor of love, thank you for doing this crazy complicated video for us! It's amazing! Alright!

[@nazatulsyah]

Few minutes away until Monday and I get a Crafsman upload, definitely going to be a great week!

[@silver_the_rowlet2521]

This guy's voice! I find it pretty entertaining. Mind you, I don't meet many people in my area who speak in the way that he does

[@xXTheLostOneXx]

I can’t think of another KZbinr I love more than the craft man

[@davenelson8187]

Crafsman! You have become the Dr. Frankenstein of craftin'. You are also the most charming, informative and entertaining man on YT IMO ❤ Thank you.

[@TheCrafsMan]

Wow. Thank you so much for that.

[@davenelson8187]

​@@TheCrafsManUR welcome. Also gettin me a Venmo acct. to send u a litle sumpthin' sumpthin' 🎉

[@rabidlyfree]

Yay!! Just what I needed this dreary Mississippi morning. 🖤 what you do!

[@BRUXXUS]

How have I not known about this channel until now?! This is so wonderful!

[@TheCrafsMan]

I appreciate you watching!

[@BRUXXUS]

@@TheCrafsMan I LOVE this little A-Mod figure. The little UV resin helmet dome is brilliant! I've been putting off my own project to watch more of your videos. 🤣 It's okay, though, I'm learning!

[@CatsDontBark]

Crafsman, did you know I’m an injection mold machine operator for work? Now you do. Have a great day.

[@quequeg1643]

those silicone makers need to be sponsoring the crafsman..

[@raharuaharu5646]

I really enjoy watching your process and your out loud thinking, thank you Crafsman.

[@OrcinusLaryngologist]

“Get your money’s worth when you can” I can’t even begin to tell ya how much of me that is when it comes to scraping every last bit of material up. 🤣

[@TheCrafsMan]

That's right! :D That mess is expensive so we're gonna use it ALLLLL. :) Thanks for watching!

[@GrandstaffJ]

High point of my week is always a new SteadyCraftin video. :]

[@BladeofSorrow7]

You have one of the most sootherational voices I have ever heard man. Great content too, keep it up!

[@junkredo2518]

Crafsman I got some three quarter inch copper pieces with a mans face on it that would be perfect! And the best part is they’re cheap. They’re only a penny.

[@TheCrafsMan]

:D That's what I'm talkin about! ECONOMY!

[@sherriweibert3311]

Crafsman, I needed to hear the, "Don't forget to wear your dust mask" song!😁

[@kenkrugger]

Your last few projects have been some seriously frustrating hard work. We should all handle frustration so well. Thanks Crafsman!

[@ericwebster6911]

I was making pancakes the other day and a little cloud of flour puffed out of the bag when I opened it. I thought CraftsMan would want me to be wearing a dust mask right now.

[@biggafigure8575]

Did you hear the song in your head? I always hear the song when something like that happens.

[@machineman6498]

@@biggafigure8575 Same. Emptying the vacuum, kitty litter, sawing

[@RodneySloan]

The amount of work that went into this just shows how much of a professional TheCrafsMan is. Bravo!

[@susanwinter2896]

I love you Crafsman. This video was so informative. You always make my day so much happier when I watch you. I hope you have a wonderful week of steady craftin.

[@thetrap1983]

I always look forward to new videos from The Crafsman, and I appreciate all of the creative info, and your attention to editing and making great entertaining content. Thank you so much, and keep on steady craftin'...alright.

[@midnightfm87]

It’s new Crafsman video day. Which means it’s a good day.

[@Parkulele]

Loving the trial and error and trial approach. Makes it all feel more realistic/wholesome. Not everything is going to work the first time 💜

[@lestat106]

When you speak it makes me smile

[@deborahdanhauer8525]

That little thing is soooo cute with its little smile🤗🐝❤️

[@JEBavido]

CrafsMan the magic man, making more minions. 🤩