I Made a Damascus Knife That's Stronger Than Steel!

[@yodadarkjedi620]

Название конечно с родни "я сделал железный нож, который железнее железа!" Сперва ужасался всему увиденному, но потом увидел страну в описании канала и все встало на свои места) Такое оборудование и такое безалаберное отношение ко всему, даже к своему здоровью.

[@ArmchairDeity]

Of course a Russian would shit-talk a Ukrainian… 🙄 OMG you’re such a stereotype it’s almost funny. But then it’s just sad. Take your better-than-you garbage somewhere else. 🤮

[@ВладимирСальников-й2в]

То же самое. Персонаж видимо не в курсе, что из стали можно сделать только стальное изделие.

[@PITBULLsurfcasting]

Да и сам ножик - весьма, так себе, 5сли не сказать "урод"

[@ArmchairDeity]

@@yodadarkjedi620 Конечно, русский будет нести чушь украинцу... 🙄 ОМГ, ты такой стереотип, что это почти смешно. Но потом это просто грустно. Забери свой мусор "лучше тебя" куда-нибудь в другое место. 🤮

[@beshkodiak]

Interesting safety shoes. I used to wear them at the beach when the sand was too hot.

[@gnome466]

Jebus, it always freaks me out when I watch people wearing sandals doing hot work, whether it’s grinding or cutting or forging. Geeezh! OH SUNGLASSES FOR WELDING! Someone please subscribe so this dude can get some safety gear! Cool pattern though. Using some pretty rough equipment and still makes cool stuff. Gotta give some credit there.

[@AK-ContentCreatIon]

How can it be stronger than steel, IF IT IS STEEL?

[@jeremyarnold1979]

Exactly what I said. 😆

[@AK-ContentCreatIon]

@jeremyarnold1979 and twisted pattern welded steel is definitely not a good idea, if it should be strong... Too much internal stress, even when normalized... Maybe some cold forging could have some benefit... But no.. Mediocre steel will not become gold / better steel,just because it's welded...

[@James-SC68]

Exactly what I said

[@paradiswest4395]

Ditto

[@henrikniklander1779]

First think here too 😂

[@niarbasdeenohw]

😮This dude is wearing sandals / flip-flops in his shop... Savage AF 🙉

[@KennAquaterarrium]

Savage??? I don't think that's quite the word I was thinking

[@jimmycarroll5644]

Very nice knife, classy yet tough.

[@johnoldland5005]

Interesting to see someone use a few drops of superglue rather than epoxy for the scales

[@patrickb.8485]

that is a beautiful knife

[@jz3953]

I can see it's stronger than paper congrat.

[@AnderAlex-qv9xt]

Молодец, из нужного места). Да, да... Поставил😊

[@MASI_forging]

Outstanding work 👏👏

[@Randomknives1]

Thank you for watching!

[@Triumph2727]

If you make a knife shaped object out of steel, guess what, it’s still steel and only as strong as the steel you used!

[@AK-ContentCreatIon]

even lesser. carbon loss through heating... and deformation. Dont forget his heat treating process is not the most controlled, and I'm sure he does not know the exact composition of the steelk he is using... so no heat treatment possible that would be right for the steel...

[@arunkumarkar9938]

Hhhhhhhhhhhhhhhhhh​@@AK-ContentCreatIon

[@lavern007]

Depends on the steel. I worked on presses with lots of gears. They were all softer than the bull gear. A 200 dollar gear is easier to replace than a $15,000 dollar bag replacement.

[@lavern007]

Now the saw blade is had.

[@KennAquaterarrium]

Exactly

[@traos9091]

This guy is grinding rusty metal peices off onto the floor in flip flops... i love it 😂

[@Rosty-ke6pd]

Yes... Flip flops are the special securu footware...

[@Randomknives1]

@Rosty-ke6pd yes you are right it’s easy to wear🤫

[@traos9091]

@@Randomknives1 😂 Just be careful mate I hate to see you loose a toe , love the content. I've learned a lot from your videos. 👍🏻😁✌🏻

[@endre7101]

Bravo-bravo-bravo!!!!!!!!!

[@Santuy_Maszeh]

Nail cut test

[@SchwabeMitHerz]

Hat er wirklich flip flops bei der Arbeit an??😂😂😂😂

[@dennishein2812]

Nice pattern.

[@Randomknives1]

Thanks!

[@davidhill1268]

I love the pattern. It looks like marble

[@rosellabill]

Great work. See ya when you make your next one.

[@Randomknives1]

Thanks for watching!

[@vaser-dk9uk]

Топор ,,колун,,,хотя узор красивый на клинке получился.

[@paxtonpickett3456]

I wish you would have done a coffee etch and put a better handle on it since it was such a nice knife.

[@ДжонСноу-н4ь]

Профиль ножа нужно выковывать вручную, и особенно уделить большое внимание режущей кромке, а не вырезать его из паковки

[@AK-ContentCreatIon]

no my friend, there is no need to forge the profile. and it would be detremental to some patterns, they would not look as desired... Only some aspects of "compressing" the steel through hammering changes the properties.. like cold forging may have some positive influence on toughness (at a given hardness).. Every modern knife manufacturer, and you cannot say that CRK or coldsteel make bad knifes, cut from a billet....

[@Yuri-z9v]

É um trabalho muito criativo.

[@pandesukur-ct3rg]

Pisau yang bagus

[@ВалерийБагиров]

Только камикадзе работает в шлепках в кузнице 😂👍

[@ДимасизАрхангельскаПошлыевидео]

И без защитного кожуха на УШМ!😂😂😂

[@nurulhussain9097]

Brother beautiful Damascus nice work. 2 thing i would like to share hope u won't mind. That handle will not last long coz u didn't use adhesive glue, quick fix glue always wears out after something specially if u put pressure. 2nd is that u could hav use half of that handle material to make a guard, with ur hydraulic its easy to make a buried handle.

[@Randomknives1]

Thank you for the advice. I'll keep that in mind for next time.

[@richardturk7162]

I wouldn't have the patience to do all that.

[@T-iu5qw6kl2s]

World Some people in the world are moving towards madness. The steel from which this knife is being made is also steel.

[@rubin7999]

На 19:48 видно как кромка ножа повреждена видимо пытался ветку разрезать 😂, столько трудов в ерунду

[@boying100]

i was terrified by the way you damage your vise by test welding on it, good job!

[@Randomknives1]

It was just a test!

[@landroveraddict2457]

Yes. a man who does not respect his tools does not respect himself.

[@nmp3120]

Nice knife. I think it could be a little sharper.

[@ВладимирМалёв-ц2э]

Ну да... Стальной нож прочнее стали..

[@jamespappas8205]

Ice is stronger than steel... (facts)

[@vitupto]

А твердость клинка не отпускается при работе болгаркой и шкуркой? Сталь же нагревается и соответственно, вроде бы при нагреве сталь стано2 мгче на тех участках, которые проходят нагрев? Или я ошибаюсь?

[@rayjay8322]

What was the purpose of adding the unworked material to the partially worked material? Was it purely for visual effect or was it for some sort of strengthening factor?

[@shahramahmadzadeh5285]

You send the grinder sparks right to the welding machine and this is not professional

[@Randomknives1]

Oh yeah I was just being lazy lol

[@oculusangelicus8978]

I've never seen anyone use a tap, as a center punch before. One of these days that thing is going to shatter.

[@pezhvaksutedelan2760]

Hey bud . Where are you from?

[@sebastiaoferreiraramos1053]

Have you ever thought about making damascus steel mixed with steel+tungsten or would that be too much for your forge?

[@Randomknives1]

I will try someday.

[@samlopez6342]

There is an other blacksmith that did use tungsten. It seemed to work

[@sebastiaoferreiraramos1053]

@samlopez6342 I've always been curious about forging with tungsten because it's the most resistant naturally occurring metal in the world, but it seems to have very little use.

[@michaelritter2180]

Alec steel did some videos on tungsten you should check out

[@sebastiaoferreiraramos1053]

@michaelritter2180 Alec Steele is there. a KZbinr I've never been a fan of, but that and personal taste has nothing to do with the quality of his videos

[@petersburgsummerresident2311]

А ты свой оказывается!! Ну так напишу, что сия Сталина не сильно айс.. Взял бы подшипник лучше😊

[@charlescox290]

18:52 wait, did you just grind off all the glue you applied? Why use the glue if you're just going to sand it off?

[@leonidbykov5758]

Сталь прочнее стали... Парадокс однако😮

[@АндрейУмеров]

Просто возми справочник и посмотри ,из какой стали делают звёздочки для цепной передачи , фрезы по дереву тоже могут быть сделаны из хреновой стали. В итоге, не имея мозгов, ты зря трудился.

[@Captain_Jho]

Я объяснил уже с маркой.

[@АндрейУмеров]

@Captain_Jho спасибо

[@UCkg-pubg]

А что ты сыпаешь на раскалённой металл ????

[@stasyan_l6418]

Адамантий или Вибраниум?! 🤔

[@B-AleX-B]

Интригант🎉

[@Captain_Jho]

Использование в пакете аналога стали 40Х по стандарту России, что применяется в дисковые пилах ставит крест на всех попытках сделать хороший нож. Из неё корпуса осколочных снарядов делают ещё. При перекале хорошо и мелко ломается.

[@ВасилийЛоктев-в9д]

Зачем я сюда зашёл...... Что название ролика, что комменты "знающих людей" о формовке клинка и холодной ковке.. Испански стыд...

[@МихаилЛебеденко-ш6х]

Камимура нервно закуривает😂😂😂

[@APs.Custom.knives]

Weld a bar to the wrench going the opposite direction as the handle /wink

[@opqrstuv5861]

Why on earth are you wearing flip-flops

[@paxtonpickett3456]

Maybe I'm just fat but that looks like pizza 4:01

[@Nobe_Oddy]

I wanna give you a little tip I learned... when you cut with an angle grinder you shouldn't push down hard to make it cut faster. When you do this you grind down the disc A LOT!! Like WAY MORE than you realize... And you only cut through the steel just a little bit faster, but you're wasting SO MUCH MONEY on the discs only to save a minute or two of time cutting..... How much do those discs cost?? (I have no idea what kind you9 use, so they could be anywhere from $5 to $20) well I can't say if it's worth it for you, but I would rather have my disc last me making 3 or 4 knives than use 1 or 2 discs on just one knife... .. So I just wanted you to know this... the video I saw did good testing... seeing if pushing hard used up more of the disc than just gently push down... and it wasted A LOT... I just wish I could remember who made the video :/ ... I just hope I helped out some how :)

[@Randomknives1]

I appreciate the tip, I'll be sure to keep that in mind for my next project.

[@siriosstar4789]

I made an acrylic bowl that is stronger than plastic

[@НИКОЛАЙБОЙКОВ-э5г]

Прочнее стали ? Абсидиан, алмаз?

[@АлександрЧерноусов-д3з]

Минерал прочнее камня....)))

[@donaldscobie8455]

Your wearing flip flops??? Safety Third?

[@vladislavmalkov5819]

мдя кругом одни специ по домасску получили ресунок и все это домаск

[@lavern007]

Sandals?

[@Nobe_Oddy]

Do you know about soaking the blade in STROING INSTANT COFFEE??? Yea after you etch it ferric chloride you clean it off then soak it in hot instant coffee... but you make the instant coffee really strong..... this will make the dark parts of the pattern and make them JET BLACK!!! Like really REALLY BLACK, but you'll still get all the same pattern and detail, and fading, and the light parts.... it just makes the dark areas much darker.... I guess there are different way of doing it, like hotter temp coffee or the amount of time you leave it in (and maybe even whether or not you wipe it down while rinsing off the etching acid 🤷‍♂) I think if you watch some videos of other knife makers on here you9 could find some better details on how to properly do it, but I think you will be impressed with what it does for the looks!!!

[@Randomknives1]

Thank you for advice I will definitely try that

[@ClintCoon1976]

Idk much about knife making but his sandals gave me anxiety 😂

[@zakzakzak3345]

У меня кухонный нож острее...

[@DangTaleb]

That needs more sharpening.

[@СаняБелый-е8ь]

Нож из стали прочнее стали?? Бред!!!

[@guataco]

Working with sandals, not very good. So good bye

[@ПавелП-т9ю]

А я сделал масло которое масленее масла

[@jeremyarnold1979]

Yea those Damascus wood knives aren't very strong.

[@JaysonMendez-b9i]

The only good blade steel in there was the saw blade, a lot of sprockets are mild steel, so you made a letter opener

[@KennAquaterarrium]

The saw blade should be the most center part of the blade. Im not going to finish this catastrophe however. That saw blade is the best piece of metal you made that blade from. Any of that other crap is simply just too soft of metal. If you can scratch the metal with a scoring tool a nail or something of a MILD strength steel. Then its not gonna cwench the way you hop more the likely is also going to crack durring final cooling. So. Goodlick. Hope you get what you want but i doubt it

[@Viktor-j7m]

А изготовил без пантовый ножик

[@petersburgsummerresident2311]

It's steel is very bad😢

[@ericknoormanw5740]

Buatnya terlalu kecil , ngapain gk buat yg besar dan panjang. Dan modelnya gk kya pisau dapur.....👎👎

[@andresmartinez-bp5ol]

El mango horroroso, y el afilado regular

[@Zl0yAndrey]

Что за глупость????? Сталь разная бывает...и дамасская сталь - это тоже сталь....вы вообще определение стали видели?????

[@РоманГолышев-ж9ь]

Смысл , ст 40 , 40х ...

[@KennAquaterarrium]

Too much carbon makes it brittle. You cant make a steel knife. That's stronger then itself. EVEN IF YOU DID. Would be better off cutting with glass. That edge will never hold up.

[@mrgarrettscott]

Not sharp enough

[@лехаха-х4ц]

кто может тот делает и молчит..а зубило ну ещё керн и всяку .......

[@ivansosnin2582]

Даже говорить не охота д того несуразное изделие такую порнуху вижу впервые и сует на всё общее обозрение хоть бы чуть постеснялся прочнее стали нарочно не придумаешь поэтому и говорят ученье свет а неученых тьма

[@johntuffy5721]

meh ... unsubbed

[@Randomknives1]

Thank you for everything

[@ciptokaban2717]

Amature 😂😂😂

[@josephmansfield2437]

first wearing thongs as shoes in a forge no second did not work the sides of that billet enough this is a pathetic looking billet the knife will have voids

[@huggybuggy6541]

Third you should learn punctuation as this sentence is very difficult to read and or understand because there seems to be no flow to it as I said no punctuation or commas periods nothing

[@josephmansfield2437]

@@huggybuggy6541 oooo burn

[@markruby3916]

You make the rest of us Trumps supporters look like shit for being such a dick head

[@williamdodge5123]

HY 80 steel US Navy Submarine construction ( cromium/ Molibedium) aka Cromolly steel. USS DIXON AS-37 79-81 POINT LOMA CA 79-81 Submarine tender USS FORRESTAL CV-59 82-84 Mayport Fl. Overlapped earth at Diego Garcia 81-82 from both Commands Semper Fortis Semper Fidelis Had foundries on both Commands.😮

[@Enderpaerles]

Охеренное изречение, а дамасск это типа не сталь? Длб

[@nikitamoskvin2716]

Чего он там прочнее😂?а чего оно тогда сверлится? Или сверло из убер адамантия? 😂🎉