I Made A Flying Beyblade- & Other Insane 3D Printables

[@JettKuso]

Click here to get the A1 Mini Combo! shareasale.com/r.cfm?b=2420414&u=4262224&m=138211&urllink=&afftrack=

[@hollynelson2449]

Question would I be able to make this if I bought this 3-D printer

[@JettKuso]

@@hollynelson2449 I’ll be putting my custom designs on MakerWorld soon, so yes.

[@AlphaRaptor3000]

Ever thought about creating 3D Printed Bakugan including ones that never got released to the public but were only shown in the anime or games since I seen a lot of people made like 3d printed Bakugan like Silent Naga Leonidas Omega Leonidas

[@Nerofromyeeps]

@@JettKusocan you link the bits you 3d printed here because I tried the one in the comments and it didn’t work plus it didn’t have supports so if you could explain or link the right one it will be greatly appreciated

[@yoyobird8427]

you didnt reverse the spin again on the last one just to see if that worked better?

[@coolforall6215]

You clearly just need to get one of those Life size anime stadium and try again

[@JettKuso]

this is the secret

[@Ghost-go4hs]

next video my backyard is a bayblade arena

[@darknessblades]

and have it be 3D printed

[@hekusblaze7042]

@@JettKusoI personally use a satélite dish, it works wonders and it is epic if you have modded launchers to make them faster to better traverse the bigger arena and fights are just explosive

[@narrativeless404]

Lmao

[@leftygurl]

close enough, welcome back ninjago airjitzu spinners

[@Nugget111uh1]

Honestly, if you properly balanced and weighed it, giving it a soft forward leap as you pull the cord, I could totally see this being used as a gliding "technique" for the Ninja. Pretty sure they've almost always used Spinjitsu for short glides or quick jumps, so it's not absurd that they'd randomly remember "oh yeah, Airjitsu!"

[@jbh269]

i think you mean bionicle rhotuka spinner

[@bigfan10-gaming79]

@@Nugget111uh1 Apparently "Way of the Departed" revealed that Airjitzu is "Edo Magic" which weakens Elemental Ability

[@thedog-random]

Jett has gone into the age of Beyblades

[@jaywhy7150]

Who could blame him

[@quandaledingleofficial6]

@@jaywhy7150 Yeah who could blame him because look how bakugan is doing rn.

[@jpuc5568]

@@quandaledingleofficial6bakugan is so dead rn idk wtf they were thinking I hope they actually reboot it again

[@quandaledingleofficial6]

@@jpuc5568 spin master only cares about paw patrol. thx god we have hasbro

[@blurryperson2685]

Yeah x is fun. It's got me to play again as an adult ​@@jaywhy7150

[@loganstynes8738]

GOTTA combine the smaller propeller with the screw bit, so it can jump into the air AFTER the first launch!!!

[@bigfan10-gaming79]

Ah so a Take Off combination

[@toast_channel]

Glad to see my design in your video! (big fan btw) I made a 3D printable Optimus Prime kit as well recently, let me know if you want the files!

[@Kasstiron741]

Toast :)

[@Maruchipawa]

TOASTER

[@UnderTheSkin13]

The fact that it actually generates lift is impressive!

[@average_internet_dweller9750]

This is literally the irl equivalent of video game mods that add features left out by the developers, which blows my mind. Also I totally thought you were gonna back into traffic at 11:49

[@gtafan110010]

this was absolutely an add..... but printing beyblades IS cool

[@nanoman172]

I mean, I would do an ad too if it meant I got a free Bambu printer, those things are pricey

[@SLVYER1]

I can't wait for a video where he makes the heaviest beyblade possible, because that's going to be the first KZbin video where someone dies.

[@star_seraph]

Gotta thank you for your last Beyblade video. I wouldn't've come across Beyblade X without it! And now I'm obsessed. On a more personal note, that quote "Marketed to boys of all ages and genders" hit me in the frickin' soul!

[@kr0nekxg347]

13:18 ITS WORKING THO!! THATS SOO TRIPPY

[@kenji6492]

This was an excellent sponsor spot. Glad you got to run wild with the machine!

[@cecillewolters1995]

Thank you JettKuso for introducing me to the world of Beyblade X! The hobby grabbed me hard and I already have 8 beys, waiting on more ^^' Best part is that I started a local community together with my local gamestore and last Wednesday a few of us came together and we all battled against other bladers for the first time, it was an amazing experience :D So if anyone lives in or near Drenthe in The Netherlands, feel free to join :) Thanks again and have a nice day, bye~

[@JettKuso]

Beyblade X is a very very good community hobby. My experiences so far have been incredible.

[@PMGangsta]

That's so awesome dude. Seeing you put so much effort in is great to watch!

[@BugsyFoga]

Once again, 3D printers show how crazy they can get when creating things

[@tyrant5337]

Please keep making beyblade content , this is unironically some of the best beyblade content and it’s made by someone relatively new to the community

[@diskdem0n]

have you finally gotten into plastic generation and got the missing piece for dranzer

[@88Spint]

Can't think of too many hobbies where 3d printing fits more then competitive plastic toys :D Absolutely love it! Made me wanna look into Beyblades :D

[@juserfan9089]

Awesome Video! :3 I really liked how they final bey could jump, it made me thing that a spring tip could maybe be extra fun, maybe it could jump a little more :3

[@Blanktheposer]

We need more Beyblade videos

[@mariaangula1638]

Yes

[@Skiwii45]

I wasn’t expecting to see my display stands when I clicked your video. Happy to see you liked it, I really appreciate the support 😁

[@JettKuso]

They’re so good!! Thank you for making cool stuff for the community

[@archeogaming]

JettKuso I just found out about your channel for the first time checking out Beyblades and I am in love with your content! Keep it up man that’s great stuff.

[@nethanielpetrillo9537]

Those looks very nice for custom made, 10/10 for this video

[@-phrog-]

The fact that it actually hovers in and does so fairly well is really cool

[@morallygary9098]

It’s like storm Capricorn on steroids- functions as advertised but objectively awful as a result. Love it

[@p2mhp917]

Dude if you made an video 3Dprinting real size bionecle mask i will for sure buy this neat printer FRr! I love masks!!

[@linkeroniw]

there's a channel called frankly built that did a video on that a while back, he has lots of other cosplay things as well

[@p2mhp917]

@@linkeroniw Ohhh thanks!! i will check this out! ;)

[@JollyMecha]

frigging awesome, i love your vids, your enthusiasm makes my day

[@paille-boy]

tbh that would be hecking epic to have irl beyblade matches with big stadium and stuff... seemingly we are very close to that! we can just fight more and more advanced design of beyblade and strategy together!

[@SmexiiWade]

Subbing!!!! I'm so excited to see whatever you produce next man!

[@jakeilano6821]

6:51 I liked the 3D printed double string launcher and 7:31 the display holder for the Beyblade.

[@kakalis2323]

Ooooo yeah baby. Getting that fo sho. After I catch up on all the beys I missed during my recent beyblade hiatus HMS too. Gonna be printing me a ton of HMS parts

[@bigfan10-gaming79]

Yeah The Scenes from the Metal Fusion Episode when Madoka accidentally switched Dark Bull and Flame Saggitario's Spin Tracks leading to Benkei and Kenta trying out different part combos where so cool, They'd show the Beys Splitting apart and the new part sliding into it's Place

[@krittip14]

After you did this experiment, I understand now Tommy was right to cancel Trypio blade and came with DB and E bits instead 😂 Maybe you can try to make a Bit that has a propeller larger than blade

[@ventikazamiaudios]

This rlly makes me wanna see you talk about those 3d printed bakugan that have started being made

[@plaarwnleelrl]

The test battles remind me of trying to beyblade with parents and having them fail to launch properly.

[@borowiecz9534]

11:55 2024 mustang gt on the background tho lmao

[@kiefervandenberg]

Look more like the s550 than s650 gt

[@mysticmind4563]

They possibilities for custom bey part us impressive. However, when you said Bionicle pieces that hit me right in the nostalgia. Btw if they ever make another Beyblade anime, I hope that they reference you as a devoted fanatic that inspired things such as custom launchers, display cases and other accessories.

[@chocofro3]

I have watched a great many videos about 3D printing and never once wanted a 3D printer until now. I still have my OG Beyblades but I would love to make my own.

[@metauniverse8028]

What would be wild with this is adding metal fight’s Storm Capricorn quake tip mechanic to make this beyblade continually “hop” and avoid the opponent while jumping and staying in the air.

[@icefinch]

Not 100% sure if it would work but might be able to set a straight tip inside of a shell with little side bits in the tip so the tip wouldn't fall out and set up a empty section in the middle of the tip with a spring set in there so when it hits the stadium it would bounce.

[@goldsocks9999]

After watching this for the 10th time (plz do more beyblade videos i love them), a propeller beyblade x could work theoretically, like if it was the ratchet or less prominent on the blade, having a bey that acts lighter than what it really is would be facinating to see

[@Kidwaizer]

I can't believe I literally got fed a 15 minutes ad and I liked it

[@ninjacats200]

I have a 3D printer I've been using for a few years now. When I got into Beyblade X the first thing I printed was a custom grip for the launcher. It's so nice. The next thing was I only have one string launcher and one normal launcher. But I had a few proto launchers from the marvel colab and the 2 starter kits I got. So I printed a double proto launcher holder. It works well but its hard to test them if I was in a real battle with the other person using a normal launcher. I wanted to get the Japan stadium so I got the battle stadium that comes with Wizard rod and one other bey along with 2 normal launchers. So once that comes in I'll print another grip and something to launcher both at once. Cannot wait for that to come. I also cannot wait for wave 3 and for the Star wars collab.

[@Justadude780]

I’m currently 3d printing my own beys for burst, it’s super fun!

[@Ellio]

That Summoning Salt intro song, too iconic lol

[@enderdude7]

You should add the screw but so it jumps and kinda flies by itself or at least hover.

[@WIImotionmasher]

So I never was into Beyblade at all I'm nearly 30 , and I've been watching Beyblade X's anime each week as episodes come out. And have been thinking "Man Beyblade's pretty cool" lol I'm glad to hear the new toy series for Beyblade X is spawning such excitement, it's not just me getting pulled in.

[@xonjurethewarlock2413]

How does this not have more views. Also, i propose if you were to size it down. Just a tad bit more and tweaking the design to include the weight of a metal layer. You may be able to, given the extra weight and the design update, make it a viable hovering x bey. Shit, I wouldn't be surprised if the marketing team from beyblade x hasbro contacted you already.

[@Aldo.flores]

No way, I had many blades on my childhood but trypio was one of my favorites despite it won’t fly I enjoyed so much launching from the second flow trying to make it fly, even years after on my first years at engineering designed in rhino an upgraded version but it needed more power to really works so designed an electric launcher, but now this toroidal helix design change it all and make it way cooler than it was!, there are many Japanese fans that make really fast and dangerous blades, I can imagine this with those ones impressive speeds and it might put this game in a whole new level

[@JosephJoestarPants]

0:27 "FAN-made" i see what you did there🤔

[@YofuwProd]

its sad how I didn't notice at first

[@Datcajunboi]

These videos are awesome

[@kyoheishin5433]

You should sell these beys! Probably many will love it❤❤

[@raptorskilltor4554]

This will definitely be in the Olympics 💪

[@mctheprotagonist569]

you should put the smaller version of the flying beyblade on the quake bit so it hops around the stadium more

[@MTI_beyblade]

This is the Trypio I didn't know I needed 🤣 W video

[@DmrXGeneral]

The beyblade card kit caught my attention the most

[@nicodalusong149]

Huh, that smaller version would work real well with that tip that makes the bey jump. The whole tactic would be to play keep away by trying to stay airborne as much as possible. So, very much a stamina type beyblade.

[@PCBWay]

This is so GOOD!

[@mechakinggidora]

Dude...with the small one, use the plastic design and put it into a sand mould. Then melt some metal down in a crucible to make the metal ring. I'd be so incredibly hyped to try and make a metal version of that

[@arseniypolyakh7762]

I have a bamboo a1 mini too))) Perfect thing for print some toys

[@Ahhhahhaha]

for the rolling ball bit, could you put a metal bearing in instead? print it 2 intervals. I wanna see what that does ahah, dope vid.

[@JuanAcosta15X]

My favorite 3D-printed Beyblade parts are the level chips for the beys of the Turbo/Cho Z system. They’re such a simple part that can improve a bey’s performance a lot but Takara Tomy locked the official ones behind very high costs. But thanks to 3D printing you can have basically the same thing for less.

[@Pexiltd]

Add that cork screw tip to the small flying one!

[@forbreakingdown1109]

I would love to see trypio wings shoot upward instead of downward. Probably gonna be one of the best destabilizer layer/blade and i also thought thats how maximum garuda works in burst.

[@ebmario874]

Loving these beyblade videos!

[@Phantom3616G]

I would say making your own beyblades is very creative but what about your own bakugan sets with those certain character that didn't get to be made as toys in the market but in that area you would have make adjustments on making it fold into a ball or sphere shape of that bakugan

[@James09892]

As someone who is way too much into aerospace engineering even though I’m not an aerospace engineer, hearing him call lift thrust hurt me to my core

[@JettKuso]

**puts on my well-worn dunce cap**

[@James09892]

@@JettKuso Hey it's all right, we all make mistakes.

[@EmeraldSpencer]

It might work if you could somehow modify it to take metal parts from a past gen (my first thought was from plastic, but a metal fight fusion wheel might also do the trick if implemented correctly) to add the extra heft it needs.

[@Treecko_bladerX]

Where would I be able to get one of the mini trypios you made? I would love to have one mainly because it floats but doesn’t fly out of the stadium like the big one

[@MagmaIfrit04]

The way metal needle would actually be good for this kind of combo Also try putting 7-60 on it

[@Brayden-ut3ew]

11:58 that camera outside is crazy

[@pixeltaku]

Damn these are some good 3D printing ads

[@xscitobor1233]

I would like a video on how you learned the 3d modeling program you used and all the prototypes you made/changed while making the flying beyblade

[@Slushiebop]

If ya add metal to it and bring it to a custom beyblade tournament, that would be hilarious to watch

[@blueblaze7312]

1. Use a life size stadium. 2. This is a GIMMICK Beyblade. Use something like Quake. The jumping bit?

[@TheDeathNoteNear]

You made a biblically accurate trypio. Moses would be proud

[@RuneStone-b3i]

My first and favorite Bey was called Phantasus (can’t remember how to spell) and it was a BEAST!!!!! He dominated every battle until new beyblades entered the house and over usage. Now he’s a relic of an ancient past. I even sent a letter to Hasbro asking if they could make a custom beyblade for me called Nitro Nocue, where he could (somehow) change directions mid battle, without losing much momentum and speed. What a stupid boy I was.

[@burningcole2538]

Those cards seem like a great way to get kids started at a small club or just be cool party favors

[@Danman350]

the community was in remiss, no blade had ever beyed like this before

[@onerian8178]

maybe if you added metal weights to the tips it could increase stability and duration and allow it to slowly hover down.

[@spyderexe2324]

You should try using a resin printer for higher resolution prints when strength doesn't matter

[@teddiandersson6744]

Ok but What about combining you smaller fan spinner top with the spiral ratchet bit?! Theoretically you could get som decent airtime multiple times throughout the match, instead of only during launch. I'd love to see what that would look like in practice.

[@zarlus8]

As an og Trypio owner I can tell you the top is a massive gimmick. It's one of the worst blades out there because of its size and the downward force reducing spin longevity. It is one the the most visually impressive tops and seeing this gyro implementation is really neat.

[@hekusblaze7042]

This is giving me Vsauce vibes, almost like Michael explaining beyblade tips Almost as erratic 😂

[@prathambansal5585]

It will be knocked out pretty easily Interested to see the results when you invert the disc and make the bey stick to stadium surface

[@Mattzere]

This reminds me of a lego ninjago thing that came out when I worked in the lego store. I got so good at using those, I could make them hover in place or aim them across the store... that was a fun job.

[@BelialBeys]

The airjitzu spinners right?

[@Mattzere]

@Belial143 yeah, that's the one!

[@billykid6745]

This would probably work better if you used a taller middle part (the part that connects the tip with the main body). So as to be taller and the wings don't get hit as much

[@poppliolugiagreninja1237]

The glide bit looks like the rolling ball bit😅

[@ReyAlanTitan]

I think it's the first time i see one of your videos before they reach 100k

[@Frost_Tiger]

need to add weight on the tip 3 of the tip of trypio or where the sudo weight disk is at to really get it working

[@muncracrack]

Yooooo, more beyblade videos, please 🙏

[@RaghunathTambde]

I had an idea. How about making only using rubber tip just like the one uses in Pegasus and make the Beyblade a combination of plastic with metal so that it gets enough weight to continuously jump everytime it lands

[@Sleepy-w3e]

Takara Tony has to do a lot of these officially

[@MyMrCacca]

wow bro this is super

[@smnio5619]

11:30 Angel Trypio

[@KoolDude-lf9jh]

Jump bit and a top that makes you lighter would be crazy

[@Chris-go1ub]

you should try normal beyblade with a angled Propeller attachment and left spin it to mimic the tripio's suction ability. 😅 it's only a theory though

[@ImmortalAbsol]

I got a Beyblade in like, year 2 at school and I distinctly remember using it at school for the first time at school at shoulder height and it immediately got stuck in a tree.

[@DJDroz-gh5nt]

You are the only person I've ever heard call Takara "Tomy". It's supposed to be a first name relationship, it's not like you're referring to royalty?😂

[@JettKuso]

Sorry, *Tomy San

[@SupCortez]

Sacred geometry seed of life strikes again

[@phantomV630]

3:30 Yes they have done that beyblade x quake bit and beyblade burst operate driver