I MADE the Millennium Falcon with UNREAL Speed - AnkerMake M5C

3D Printing and Painting the iconic Star Wars ship the Millennium Flacon. In this video Facility D20, test and reviews the AnkerMake M5C #ankermake #ankermakem5c #3Dprinting
This video was inspired from channels like Nerdforge, Miniac Painting, Boylei Hobby Time, Real Terrain Hobbies, Uncle Jessy, Geek Gaming Scenics, Minibricks craft and Eric's Hobby Workshop.
**GET THE AnkerMake M5C HERE**
Order on Amazon: ankermake.club/811133Oa
Order on Ankermake: ankermake.club/81113FKl
AnkerMake M5C is a 3D printer with high speed & high precision and is designed to easily customize functions in one click. It is available for purchase for $399 in the U.S. £399 in the UK, 449€ in the EU and CA$699 in the CA.
** Gaahleiri Air Brush**
www.gaahleri.com/?ref=Facilit...
Millennium Falcon Free STL File:
fab365.net/items/277
FACILITY D20 Pateron
/ facilityd20
Instagram:
/ troy_buckle
Facility D20 Facebook:
/ facilityd20

[@fab365_official]

Wow! Awesome print of my design! Thanks for printing and sharing video!

[@FacilityD20]

Thanks! It is a fantastic design. Actually, you have a ton of fantastic designs. I am really hoping this video picks up more views, as I really want to make a few more things from your site.

[@jackmccourt6180]

Highly recommend your designs to anyone. I found you guys after searching for high quality starship models and have ended up printing a tonne of your stuff!

[@GarouGames]

Nice work bud, love watching this on a Friday.

[@FacilityD20]

Thanks a lot!

[@NatesMiniatures]

Great video Troy, I was surprised how it all just snapped together the designer of that model did very well.

[@FacilityD20]

Definitely did. I was impressed, I think they have a pile of other star wars stls as well

[@mariojunior-lq6sd]

Beautiful work.

[@FacilityD20]

Thank you very much!

[@FacilityD20]

**GET THE AnkerMake M5C HERE** Order on Amazon: ankermake.club/811133Oa Order on Ankermake: ankermake.club/81113FKl AnkerMake M5C is a 3D printer with high speed & high precision and is designed to easily customize functions in one click. It is available for purchase for $399 in the U.S. £399 in the UK, 449€ in the EU and CA$699 in the CA. *** Gaahleiri Air Brush*** www.gaahleri.com/?ref=FacilityD20 Millennium Falcon Free STL File: fab365.net/items/277

[@toafhers6844]

The ebon hawk from k.o.t.o.r. beautiful ship. Dare troy. Love to see it printed to fit 28mm scale minis

[@FacilityD20]

That would be cool

[@RIVERSRPGChannel]

Wow that is so cool Great job

[@FacilityD20]

It did turn out better than expected, especially the paint job.

[@jesnoggle13]

“Built in no time flat.” You didn’t mention how long. Lol

[@FacilityD20]

The hours were in the slicer Montage 😆 sorry

[@johnhanley5546]

Millenium Falcon, Battlestar Galactica, Tardis (Blue Phone Box version), honourable mention - Star Trek Defiant - enjoyed it - keep making videos.

[@FacilityD20]

Thanks. The tardis didn't even come to my mind!

[@thomaswilliams5005]

Man that paint job is sick. Great work as always.

[@FacilityD20]

Thanks! I am really happy with it for sure.

[@ITSACRITICAL]

Awesome video buddy!!! it turned out great and that bust looks awesome!

[@FacilityD20]

Thanks! I want to paint that bust now, too, lol.

[@Zeros_Hobbies]

Man that thing looks fantastic dude. Top 3 ships Millennium Falcon Serenity Razorcrest.

[@FacilityD20]

Nice list, I think I have: 1. Enterprise 2. Falcon 3. Galatica 4. Serenity 5. Nostromo

[@stormofdragons]

4:55... landing gear attached to the wrong side confirmed. LOL, Great video, but the Radar dish is on top, and the cockpit is on the starboard side of the ship. Unless this is a Corellian YT-1300 variant. Nice to see you did catch it.

[@FacilityD20]

Haha... i was like somthing don't look right here!

[@UgniusM7]

Insane🤯 Great video!

[@FacilityD20]

Thank you kindly.

[@Stubones999]

I wonder how a Bambu Lab X1C would have done on time coompared to the AnkerMake m5c?

[@JasonFan-qk3tb]

Love the video! 3D printing is def more accessible now and M5C seems like a good choice

[@FacilityD20]

It really is!

[@Theexplorographer]

Hey Troy, just looking at the printer in the video I can see that your gantry is not level. Under the shrouds there should be some screws you can loosen to level the gantry with your printer base. This will make your prints come out even better. Just loosen the screws, measure from the bottom of each side of your X/Z Gantry to the printer's base top, (Not the print bed itself), then tighten the screws back up. Then do an auto-level again.

[@FacilityD20]

Thanks. I am going to check that out tonight

[@Slurgical_3D_Terrain_Channel]

Very nice,loving this. yes you nailed it. :)

[@FacilityD20]

Thanks!!

[@hyosworld109]

It was like 21 and a half hours print time total, not bad for how great it came out!!

[@FacilityD20]

I know it was really fast. I probably could have fit it all into 3 prints, but this was my first time using this printer, and i wasn't sure how the bed adhesion would be, but it was great.

[@goforitpainting]

Cool. 👍🏻 Now I'm painting a 1/58 scale Millennium Falcon from 2005.

[@FacilityD20]

Nice! Hope this video inspired you a little or gave you some ideas of what to do or what not to do haha

[@dietrichkeip6213]

Great video again. And the paintjob really, really nice. What I would like to know, how good can you print "normal" minis? Have you tried yet?

[@FacilityD20]

Thanks, i have not had a chance to print smaller minis with it yet. However the precision mode does 0.05mm and the prints are very smooth and clean, so I am thinking it will do a good job for an fdm printer on minis

[@trent9629]

Love your channel! Thinking about getting this printer but I'm wondering how it has performed long term. I've seen mixed reviews online about it lasting forever running nonstop and others say it died within the first few weeks. So I just wanted to see what kind of experience you've had

[@FacilityD20]

So far, and I haven't had it for long, I have experienced no issues at all.

[@natecar1]

Looks great man. I have a resin printer but I'm tempted now to get a FDM one for terrain and big items. If you don't mind me asking, where is your accent from? I only ask because I'm Irish and some of your accent sounds straight out of Dublin.

[@FacilityD20]

Thanks. I love FDM for that exact reason. I'm from Newfoundland Canada, there was a lot of Irish settlements here years ago, and we still carry some of the accent.

[@natecar1]

@@FacilityD20 Ah, right so. That's cool. I've always found accents interesting. Also funny how places like Boston and New York had massive Irish immigration but literally nothing about them sounds Irish but Newfoundland does

[@FacilityD20]

@natecar1 we are basically comprised of a buch of small costal fishing villages, not real cities, just a few larger towns.

[@johnhanley5546]

ps I wonder how many printer sales and millennium falcon downloads you just caused - you should be on a commission - best print I've seen in a long time.

[@FacilityD20]

Thanks, but the video is not performing that well yet lol.

[@lukehales3407]

Love this mate, top 3 apart from the Falcon; Enterprise-D, The Benatar and The Planet Express ship!

[@FacilityD20]

I didn't see a fe of those coming! Cool. Nice list, I think I have: 1. Enterprise 2. Falcon 3. Galatica 4. Serenity 5. Nostromo

[@joselltemes]

Weren't parsecs for measuring distances were they? Nice video man

[@FacilityD20]

I belive so yes.

[@twistysamurai739]

Yes so technically the millenium falcon took the shortest route through the kessel run not the fastest. Still a major achievement since you have to fly dangerously close to multiple blackholes.

[@FacilityD20]

@@twistysamurai739 agreed

[@blazet9860]

What scale did you print this at?

[@FacilityD20]

Not sure... I don't recall now. Sorry.

[@TheGeezerGeek]

U.S.S. Enterprise Refit from The Motion Picture. Reimaged Battlestar Galactica. U.S.S Voyager. Millennium Falcon. The Jupiter 2 (lost in Space 1960s)

[@FacilityD20]

Very nice.

[@TheStonehammerFiles]

considering it just snaps together, I would have done subassemblies.

[@FacilityD20]

The person who designed this thing had a great understanding of FDM printers that's for sure