I OverClocked My KS0 Pro! Guess What Happened!?

In today's video, we are OVERCLOCKING my IceRiver KS0 Pro. From factory the KS0 Pro does about 200 Gh/s at 100 Watts, I wonder how far we can push it! TSWIFT and his team released some of the FIRST FIRMWARE out there to PUSH the IceRiver KS0 Pro to Level 10! Let's take our KASPA MINER and get some more HASHRATE out of it! I wonder how far we can push it? I'd be happy with 250 GH/s but lets see what happens!
⭐𝐈𝐧𝐭𝐞𝐫𝐞𝐬𝐭𝐞𝐝 𝐢𝐧 𝐩𝐮𝐫𝐜𝐡𝐚𝐬𝐢𝐧𝐠 𝐭𝐡𝐞 𝐈𝐜𝐞𝐑𝐢𝐯𝐞𝐫 𝐊𝐒𝟎 𝐏𝐫𝐨 𝐎𝐯𝐞𝐫𝐜𝐥𝐨𝐜𝐤 𝐅𝐢𝐫𝐦𝐰𝐚𝐫𝐞? 𝐑𝐞𝐚𝐜𝐡𝐨𝐮𝐭 𝐭𝐨 𝐓𝐒𝐖𝐈𝐅𝐓 𝐝𝐢𝐫𝐞𝐜𝐭𝐥𝐲 🔗𝐂𝐥𝐢𝐜𝐤 𝐇𝐞𝐫𝐞 ➡ t.me/swift_mining
🔥𝐓𝐞𝐥𝐥 𝐡𝐢𝐦 𝐓𝐡𝐞 𝐇𝐨𝐛𝐛𝐲𝐢𝐬𝐭 𝐌𝐢𝐧𝐞𝐫 𝐬𝐞𝐧𝐭 𝐲𝐨𝐮!
𝐏𝐚𝐫𝐭𝐬 𝐔𝐬𝐞𝐝 𝐢𝐧 𝐓𝐨𝐝𝐚𝐲'𝐬 𝐕𝐢𝐝𝐞𝐨:
🔗AC Infinity MultiFan S3 120MM USB Fan ➡ geni.us/ACInfinityUSBFanS3
🔗230W Upgraded Power Adapter for KS0 Pro Overclocking ➡ geni.us/230WPowerAdapter
🔗Kill A Watt Electricity Usage Monitor ➡ geni.us/KillaWattMeter
🔗Infared Laser Thermometer Gun ➡ geni.us/InfaredThermogun
𝐕𝐢𝐝𝐞𝐨𝐬 𝐋𝐢𝐧𝐤𝐬 𝐌𝐞𝐧𝐭𝐢𝐨𝐧𝐞𝐝 𝐢𝐧 𝐓𝐨𝐝𝐚𝐲'𝐬 𝐕𝐢𝐝𝐞𝐨
📺Unboxing, Review and Setup Guide for the IceRiver KS0 Pro ➡ • The ICERIVER KS0 PRO i...
----------
👕Want to Represent and ROCK your Favorite GPU? I launched a Brand New Store Front for GPU Mining Enthusiast! New GPU Apparal Every 3 Months! Checkout hobbyistminers.store
👕𝗟𝗼𝗼𝗸𝗶𝗻𝗴 𝗳𝗼𝗿 𝗛𝗼𝗯𝗯𝘆𝗶𝘀𝘁 𝗠𝗶𝗻𝗲𝗿 𝗖𝗹𝗼𝘁𝗵𝗶𝗻𝗴 𝗔𝗽𝗽𝗮𝗿𝗲𝗹 𝗼𝗿 𝗜𝗻𝘀𝗮𝗻𝗲 𝗖𝗿𝘆𝗽𝘁𝗼 𝗠𝗶𝗻𝗶𝗻𝗴 𝗚𝗲𝗮𝗿?
www.cryptee.co/collections/th...
⭐Use Checkout Discount Code "THEHOBBYISTMINER" for 10% Off your Entire Purchase.
----------
🔥𝐀𝐦𝐚𝐳𝐨𝐧 𝐋𝐢𝐧𝐤𝐬 𝐟𝐨𝐫 𝐌𝐢𝐧𝐞𝐫𝐬 𝐭𝐨 𝐂𝐡𝐞𝐜𝐤𝐨𝐮𝐭:
🔸My Favorite Efficient Inexpensive RX6600 GPU geni.us/SapphireRX6600
🔸 One of the TOP NVIDIA GPUs I Can Recommend the 3070 geni.us/GigabyteRTX3070
🔸Beginner 6 GPU Mining Rig Frame geni.us/MS8wYJ
🔸12 GPU Mining Rig Frame geni.us/12GPUMiningFrame
🔸iFixIt Tool Kit for Miners geni.us/IFixItKitHOBBYIST
🔸Thermal Pads I Have Tested - Kritical 20 W/mK geni.us/KriticalThermalPad
🔸Thermal Paste I Use MX-4 geni.us/ThermalPasteHOBBYIST
🔸 1200w Server Power Supply I Use for My GPU Rigs and Mini ASIC Miners geni.us/HPServerPSU
🔸Breakout Board for Server PSU geni.us/BreakoutBoard
🔸1300w ATX Power Supply for GPU Mining geni.us/1000wEVGAPowerSupply
🔸Mini Screen for GPU Mining Rigs geni.us/Kuman7InchScreen
🔸Sony ZV1 Camera I Use geni.us/SonyZV1CameraHobbyist
🔸Wide Angle Lens
𝐅𝐨𝐥𝐥𝐨𝐰 𝐓𝐡𝐞 𝐇𝐨𝐛𝐛𝐲𝐢𝐬𝐭 𝐌𝐢𝐧𝐞𝐫 𝐨𝐧 𝐒𝐨𝐜𝐢𝐚𝐥:
✅Twitter - / hobbyistminer
𝐉𝐨𝐢𝐧 𝐓𝐡𝐞𝐇𝐨𝐛𝐛𝐲𝐢𝐬𝐭𝐌𝐢𝐧𝐞𝐫 𝐃𝐢𝐬𝐜𝐨𝐫𝐝 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐭𝐲 𝐚𝐧𝐝 𝐓𝐚𝐥𝐤 𝐀𝐋𝐋 𝐀𝐛𝐨𝐮𝐭 𝐌𝐢𝐧𝐢𝐧𝐠!
✅Discord - / discord
✉ 𝐄𝐦𝐚𝐢𝐥 𝐟𝐨𝐫 𝐁𝐮𝐬𝐢𝐧𝐞𝐬𝐬 𝐈𝐧𝐪𝐮𝐢𝐫𝐢𝐞𝐬 - [e-mail]
----------
#bitcoin #kaspa ‪@cryptom‬#cryptomining
📺Video Content and Chapters
00:00 I OverClocked My KS0 Pro to 285 GHs! Here's How!
00:25 How does the IceRiver KS0 Pro Perform Stock?
00:50 These Kaspa Miners are in High Demand!
01:40 What you need to Overclock the KS0 Pro.
03:15 Everything you should Know about the TSWIFT Firmware
05:30 Here is my IceRiver KS0 Pro Kaspa Miner
07:10 Step by Step Guide to Overclock your KS0 Pro
09:40 We need to Make some Modifications to my KS0 Pro
12:00 The KS0 Pro is a BEAST when Overclocked!
12:40 How many Watts does the KS0 Pro use when Overclocked?
13:00 How HOT does the KS0 Pro get when Overclocked?
14:50 I'd recommend the KS0 Pro OC Firmware!
𝐃𝐢𝐬𝐜𝐥𝐚𝐢𝐦𝐞𝐫- I am not an "Expert", I am learning along the way, just like you! Please do your own research, come to your own conclusions & make your own mistakes! I am NOT a Financial Advisor, please always take guidance from Professionals. Everything on this channel is for Fun as a Hobby and Entertainment for you, the viewer.

[@MangledRemainz]

Awesome! Finally getting mine by Dec 15th. Was supposed to be a part of the Nov 15-30th batch but DHL is slow right now. Want to get the bundled firmware so can get the 350gh when it releases again for the newer batches.

[@marcrijkhals]

Hi host 😊 thank you for the awesome videos. Still I have my questions about the vents. Vents that suppose to cool the inside, they always need to suck out the hot air. If you blow air in, you fill the inside with the warm air. And that you do not want! So with the 2 small vents, I would turn them over so the suck the hot air out while the cooler air flows in from the side.... The big 120mm fan can blow cooler air to the heatsink that is good. But keep in mind that if you want to cool the inside of some case, you always need to suck the warm air out.

[@seans5159]

You make the best videos! Thanks for the guide!

[@TheHobbyistMiner]

Happy to help!

[@TheTravelersTravels]

Congrats on winning the silicon lottery! My KS0 pro comes in tomorrow (supposedly) I hope I have good luck with mine, one of my KS0G's will not OC at all.......

[@TheHobbyistMiner]

Good luck!

[@AlteredComponent]

Good video buddy.

[@chasplace2308]

the mesh idea is one I like to get into on my kso pro. mine is running 70 degree celcius on he exhaust side and 48 on the intake side. I have purchased the fan and will record the temp difference on my channel. oc the kso I am cautious since I am on a budget and I don't get things for free. thnx for the info as I am growing in this journey of mining.

[@AtomicMining]

thought the same thing, plan to hang them in a gpu frame setup since i have 8 coming in, we'll see how it goes

[@fredlo6935]

I have one of these kso pro and its been over clocked. I installed two fans one on top and other at the end of miner with ends removed. It stops mining after a day or sometimes over 2 days. I upgraded also power supply 230 watts. It has tswift firm ware. Does this happen to yours? I'm using 280g firmware.

[@thecanadianpunk-miner4life]

It will be interesting to see if the overclocked KSO Pro will last as long as a not overclocked!

[@alvydasjokubauskas2587]

In theory heat will destroy it faster

[@beny68eos]

Great video. I would be quite interested in the temperature around the power connector on the board. Just because the power supply can handle 230W doesn't mean the board with its own connector is built for it. Tswift did send me a video of the temperature of the entire KS0 Pro, but the connector side is covered by a diffuser with a fan

[@LostJediJC]

what size screws are you using to put fan onto KS0 Pro frame? :)

[@fullyelectric]

THM great to see you only needed todo the first firmware, do you know why he stop selling the 360Gh firmware I think RPM or GGM got the 360Gh firmware and it worked, I’ll check with them to see if something happened, still awesome results and the instructions for cooling and PSU was for the 360Gh, also the reason to point the fans down now is because the KS0 Pro top enclosure has 80% less vent holes vs the KS0 top cover.

[@TheHobbyistMiner]

I got lucky the first one worked. My understanding is the Newer KS0 Pros are a little more picky. So they have had to take a step back and refine a few things. I was told they will be releasing the firmware results of 360Gh down the road.

[@DKER1932]

Hi, are they still running good after few months now?

[@akrambasha321]

without overclocking if we just use higher power supply is there any change in the hashrate ?

[@philipcattell6558]

So you have increased the hashrate by 85Gh/s but the watts have also increased by approx 45W so what is the increase on Kaspa earning now over the stock IceRiver firmware? Does the increase in earnings cover the cost of the OC firmware, additional PSU and increased power consumption?

[@dronetheworld4k67]

He doesn't answer shit....

[@skaltura]

14:20 that's only ~43C on hottest spot, even PLA is more than high temp enough. just go ahead and print. Do ABS if worried.

[@Mason0011]

Can you explain if I should use hive os or nice hash. Currently I use nice hash

[@arcrypto22]

You make an additional 10.38 kaspa per day. which as of right now is an extra $1.34 per day. 600kas for the oc from tswift. makes it 57 days return if everything stayed exactly as it is now. (which we know it wont) more hash rate surely is going to hit the network.. but if kas goes to 20 cents or something.. then it changes everything. for now I am going to keep mine stock I am thinking.

[@vincentlabelle7861]

They increase hashrate on their own depending on the unit temperature.

[@ABULAYALI]

where is file pls give me link for Ks0 pro oc

[@kcxfiles16]

I ended up taking off side panels off all my KSOs. Definitely cooled them down. Pain getting screws off. Few stripped. But all came off. On Pros. I got better AC fan. Extremely cool. Better than cheap fans. I only use them on OG KSO. I see much higher GH than 280GH. I can get north of 330GH to 350GH. I don’t see any issues leaving side panels off. Do you? Thanks

[@TheHobbyistMiner]

Nope. Mine are off still.

[@WISCOFISHINGANDOUTDOORS]

@@TheHobbyistMiner miner* off still... lol

[@luisedgarzendejas9014]

Will a 20v psu work?

[@mytime5987]

MAC address of the miner where can I find it?

[@K9TaZerTV]

I actually use the AC Infinity AXIAL 1238 and it's incredible!

[@benoittheminerandgamer]

I am pretty sad that we don't have something free to try. I am not pay for that.

[@sausageslaps]

i got my two from the november batch, 1008 us dollars shipped with psus.

[@manoahvanderwolf3259]

So that's nice, not too bad. It kinda just keeps stable, in that the power consumption is the same to the original if you divide the upgraded hashrate. after all, from 100 watts to 140 watss is 1,4 times the consumption. going from 200 gh/s times 1,4 equals, 280 gh/s. Now if we take into account the price of the fan and the adapter, then you're looking at a 70 USD investment. i think you might sell the original adapter and fan for 20 bucks tops, so you could say it's a 50 USD investment. 600 KAS for the firmware update is about 65 USD, making the true investment about 115 USD. for 115 USD, you make your KS0 PRO about 40% more powerful. this means, that you essentially get the same power out of 3 KS0 pro's out of 2 1/2 upgraded ones. unfortunately, halves don't work, so that means you'd need to have like 5 upgraded KS0 pro's to reach an 'unupdated' equivalent, right? so does that make 'sense' ? It goes for about 417 USD right now (for the january batch) or 500 USD for the December batch. we'll stay with the Jan batch. original : 200 GH/S @ 100 watt > 417 USD updated: 280 GH/S @ 140 watt > 532 USD ( total price incl. upgrades ) we need 5 updated KS0 pro's to achieve a 'full number' ( 1,4 x 5 = 7 ) 5 x upgraded KS0PRO = $ 532 USD = $ 2,660.00 USD ( 5 x 280 GH/S = 1,400 GH/S ) ( 5 x 140 w = 700 w ) 7 x standard KS0PRO = $ 417 USD = $ 2,919.00 USD ( 7 x 200 GH/S = 1,400 GH/S) (7 x 100 w = 700 w ) so if we divide that, we get a price difference of $ 259 USD saved by doing the 'upgrades'. so, if we round that up more or less, if you buy 10 upgraded KS0PRO's, you get 2,800 GH/s in total and use 1400 watts, and you spend $ 5,320.00 USD to achieve that same number, you need to buy 14 KS0PRO 'standard' versions, which will set you back 476 bucks more. essentially, for every 10 upgraded KS0's, you 'save'1 standard one. 10 upgraded KS0PRO's will sset you back $ 5,320.00 USD, and get you 2,8 TH/S. however, 1 standard KS1 will set you back $ 1,823.00 USD, and get you 1 TH/S, the equivalent of 5 KS0PRO's. Making the KS1 cheaper than the KS0PRO in comparison, even though the KS1 uses more Watts. if we round that up to 3 TH/S, you'd need 3 KS1's, that would set you back $ 5,469.00 USD and give you 3 TH/S at a consumption of 1800 W you'd need 15 KS0PRO's standard, which would set you back $ 6,210.00 USD and give you 3 TH/S at a consumption of 1500 W you'd need 11 KS0PRO's upgraded, which would set you back $ 5,8252.00 USD and give you 3 TH/S at a consumption of 1540 W. So, theoretically, the standard KS0 PRO is actually still the most efficient, especially if you consider that the 'overclocking' will likely lower it's lifespan, and void warranty, even though it is in total about 700 USD more expensive in investment cost. interestingly enough, that means you can buy a KS0PRO extra and have 3,2 TH/S, save 300 USD, and save 200 watts still. But, all of that goes down the drain if you compare it to the KS3M. 1 KS3M sets you back $ 7,396.00 USD right now, and has 6 TH/S, at 3400W. 6 KS1 sets you back $ 10,938.00 USD right now, and has 6 TH/S, at 3600W. 30 KS0PRO sets you back $ 12,420.00 USD right now, and has 6 TH/S, at 3000W. 22 KS0PRO upgraded is $ 11,704.00 USD right now, and has 6,1 TH/S at 3080W. So if we look at value, the KS3M is the king, even though it's comparable consumption is higher. This means that the KS0 PRO, comparably, has still too high of a buying price. The KS0PRO should essentially drop 40 % in price to be competitive to the KS3M right now. Considering however that it's more efficient, that figure may vary a bit. But let's say that if it drops 30 % in price, then we're looking at very interesting prices. If the KS0 Pro drops below $ 290 USD, it's an absolute beast to dive into and would set the market on fire. It would make the industry far more approachable. That however is not the case unfortunately. So as fun as the KS0PRO seems to be, it's still OVERPRICED compared to it's own other products. What would be interesting is to see whether the KS0PRO, especially with the current drop in KASPA value, might actually drop close to that value. If it would, i am sure many would jump in, and would increase the value of the KASPA, making it very profitable. what's missing right now essentially is a 'inbetween model'.

[@shilvock22]

Great analysis and exactly my thoughts. The increase in cost to get that hashing bump is hard to justify considering the ROI timeline.

[@manoahvanderwolf3259]

@@shilvock22 correct. it's funny that there are 'rumors' about Kaspa increasing in price again, this is just 'setting the market', and tricking potential buyers to keep buying Kaspa stock until the ASICs can't keep up with efficiency due to increased difficulty and prices dropping. at that point, a lot of KAS miners are going to either pull the plug, or sell their ASICs. now i hear a lot of speculation about supposed 'upcoming' bull runs. as 'nice' as that may sound, obviously it'll make KAS ASICs get some value, but at the same time, Bitcoin and Doge will be valuable too, and that's where most of the interest will - logically - be found. though ASIC miners, in general, are 'very' efficient in mining a specific 'crypto', this is obviously very much the crypto 'currency's' desire and so they pump and hype it up so people are tricked to jump in on the bandwagon. only the people whom have money to burn, or can get in serious debt with their credit cards (USA, USA, USA), and are 'fanatic' in the market have the benefit of jumping in these machines, and i'm pretty sure that the youtubers promoting this get a huge discount from the manufacturer - perhaps they can even get them for 'cost price'. so right when these currencies go 'boom', they can pull loads of money in a short time with that, then the manufacturer gets loaded by a run on these machines, until the hype dies off again, and the rest is playing 'catch up'. but even then, it's generally a lost cause because billionaire crypto businesses will jump on it the most and it should come at no surprise these are generally actually bank owned / banking companies, allowing them to spend huge amounts of investments at the fun of it also being a 'tax deductable business investment'. a shame, because technically, these (asic) miners would be, on paper, a lucrative and reliable 'passive' source of income, including long-term. on paper. on paper, and in theory, a better investment than slamming thousands into a currency that could just as well disappear. because if it 'drops in value', the benefit of the (asic) miner is that you keep mining the coin and (slowly) increase the 'gold' you mine out of the 'resources'. if only these (asic) mining rigs would be guaranteed to make a minimum 10 USD/EUR profit each day, and the ability to 'switch' crypto. then you could never truly go wrong with it. after all, it might not make 'much', but it sure as hell helps you pay f.e. your electricity bills, especially if you run the ASIC as a 'space heater' in winter and/or retrofit it into a 'water heater' so it can act like a kitchen boiler or even a shower boiler. It would also make it profitable for people who 'dare' or 'actually' invest in several of these things. if you could aquire/build 10 to 15 of these, that would get you $ 3,000.00 a month, as long as you can have the power supply to pull that.

[@TheHobbyistMiner]

Let me pull up a chair, this is a long one!

[@manoahvanderwolf3259]

@@TheHobbyistMiner That's what she said!

[@tyt09]

Hi!how you can solve the 5 min hashrate when it turns into abnormal? I was running it in k1pool unmimeable.etc but now i can't mine it in any pool anymore. 😅

[@dronesiviews]

How do you message him to get the software. He doesn't answer any questions in telegram. Where do I buy/pay for this overclock

[@hindra8]

How much do you earn with 285gh/day?

[@user-hu9cs8bz7p]

from where i get this file ???

[@laplanteconsulting]

It has already been asked but no answer so I will try to ask again. What size screws are you using to mount he fan to the unit? The screws that came with the fan are obviously too short to fit.

[@TheHobbyistMiner]

🛒Screws for Mounting a Fan to KS0 ➡ geni.us/KS0FanMountingScrews

[@laplanteconsulting]

@@TheHobbyistMiner Thank you very much!

[@aaacomp1]

Some people are placing their fan pulling air up and away from the unit and some people are placing their fan blowing down onto the unit. Which one is it supposed to be? And why is there such confusion about which way to blow the air onto the top of the ks0 pro?

[@cryptobotts6316]

It's easier to push air then pull, I have a 8" inline fan sitting on top blowing down and it's running nice and cool. Waiting for my power supply to see how far I can push it.

[@domg6614]

My main question will be, how much it cost for the entire upgrade? and sub question is Does Tswift works directly from iceriver but on the side ?

[@ratedrawr1411]

What's up, Hey the AC Infinity S7 I's that the same as the S3 but just 2 fans???

[@TheHobbyistMiner]

Never used those models, what you thinking of using it for?

[@ratedrawr1411]

@TheHobbyistMiner - I have 2 KS0 Pros and wanted to get fans for both... If the S7s are just (2) S3s I'd buy those since it's cheaper than buying (2) S3s, ya know... lol

[@ratedrawr1411]

Or should I get (2) AC Infinity AXIAL 1283???

[@darc1987]

How are you securing the fan to the heatsink?

[@borido007]

with a blop of cement ;)

[@alexevans5043]

Wow. Just stay away from miners lol

[@ridvanrideon]

No offence but you have too many links in the description, but the most important link is the overclock download, I could not find. I will need to move on, thanks.

[@RATTL3R186]

You can also take a ordinary pc fan remove the connector find a old 12vt DC powerblock off of a old router etc. Connect the wires/solder/electrical tape or heat shrink them. Plug it in and tadaaaa. 13 bucks saved.

[@S-Olly]

How big is the barrel plug on the charger?

[@cryptobotts6316]

5.5mm it the plug end it's a 5.5mm x 2.5mm

[@user-ry2rj2hw9z]

Ks0pro hashing but red and green light in front blinking ?

[@TheHobbyistMiner]

No Worries

[@whaletailmining136]

duuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuude, sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeet.

[@TheHobbyistMiner]

Dude, Cool!

[@brunoamacedo]

gostei de alguem explicando passo a passo

[@JM-fv1fk]

What kind of screws do I need to attach my fans like that?

[@TheHobbyistMiner]

I ended up taking my KS0 and the fan to a hardware store and found exactly what I needed.

[@JM-fv1fk]

Thanks

[@darc1987]

​@@TheHobbyistMinerplease tell us what specs for the attaching screws.

[@dustincochran2700]

Screw thread size is M3. Length depends on thickness of your fan, but you would be safe with 30mm length. So, screws can be M3x30mm. Removing the side plates (4 Phillips screws on each side) will help a lot with temps as well)

[@tredo267]

Could a Bitmain 2000w 12v source be used?

[@dougiee6589]

The voltage needs to be 19V to 20V otherwise its not going to bootup being under that or get tossted if over 20V

[@benoittheminerandgamer]

Yes 12v can be use but you have to up to 5.5mm plug that can take more amps.

[@benoittheminerandgamer]

@@dougiee6589 12v can be use. The hardware of the KS0 pro not use 19v they use less than 12v.

[@alvydasjokubauskas2587]

If you have very strong fomo you will buy at 1k for each KS0 pro, but I don;t have this feeling so I will be paying

[@Prosper85]

My guess is they will be paperweights in the next 8 months

[@popstream4972]

Hello Can the kso pro be used with nice hash?

[@matman72703]

Yes, it can

[@yanlisito]

Can i use my same overclock for all my ks0 pro?

[@TheHobbyistMiner]

Nope. Need fo purchase one for each, they are locked to the MAC

[@Forjadao]

TIME OUT ERRO, Pease help me =( (

[@roberttoole796]

You should open it and turn around the small fans. Right now the AC infinity and the internal fans are working against each other, and whatever the small included fans are meant to cool will be running definitely hotter.

[@AlteredComponent]

actually no, they are causing a sandwich cooling and that is optimal for this device forcing air out of each side

[@002codename]

i opened both side panels and place my fans sideways it take the hot air out from one direction

[@hadrianos1]

Kinda scary, for now I prefer to stay with the normal 200G version, tbh

[@alexevans5043]

What a fuckin Simp lol

[@knockoutpressurewashing8333]

Kaspa earnings go up.. efficiency goes down.. 50 more watts for 70 g/h

[@mrjonesyyy]

Why does you video seem so chunky now? It's like 20 fps?! Hard to watch

[@AydoF]

i do every one step from video my max gh 210....

[@spmadeez]

Your temperature is too high, your fan RPM is too low...that is what the request is a AC fan, because it can push more air. USB does not cut it.

[@mrjonesyyy]

Lol. I'm not gonna pay for overclocks?! What?!

[@kentan3145]

Not worth to upgrade with 600 Kas, all you mine give to tswift and you won't get any at the end of the day.

[@tiptopsmoke1086]

25 days of kas mining at current diff. for just the firmware no thanks

[@SergeyFomkin-rh4zo]

👍🤝💪🙏

[@Baerchenization]

The one thing not to like here is that you call this a success after 30 minutes... makes me think you never OCed anything in your life ;)

[@gorankunovic6404]

No responce from tswift..😢😢😢😢😢

[@nilarmstrong]

Not recommended stay at 200

[@rolandlam3958]

what are the risks

[@alexevans5043]

Based on what? Lol nothing

[@TheTrapperDJ]

Lmao they asking kaspa for this to be honnest that's a scam while we have having a 30% overclocking on a ks2 for free... Cmon is 8 times more powerfull thab this ks0 pro -_-

[@arpitsingh2]

Please stop making clickbait

[@Neonjer11]

I started on some fan designs. I'll post on your discord. I'll make some multiple designs