I Own 6 Standing Desks. This One is BY FAR THE BEST - Deskhaus Apex Pro Review

[@Ahnestly]

ABOUT THE WATER BOTTLE - I accidentally left the water bottle I used for this test in my car (in the hot sun) and it deformed. I didn't have another one and had to film. This was not an attempt to exaggerate wobble. I have plenty of other things on the desks so you can see everything else wobble. *Links + Coupon Codes Below* - Please use them as it costs you nothing, but helps keep the channel going! *DeskHaus (USA)* *IF YOU'RE USING A VPN, THE COUPON CODES WON'T WORK! Please turn off before using!* 🛒DeskHaus Apex Pro - geni.us/knBZtw Use code *Ahnestly* for $50 off 🛒DeskHaus Detroit Desk - geni.us/YVjBAy Use code *AhnestlyDetroit* for $25 off

[@hismoness23]

Can you review the Charcoal desk? Love the content!

[@noahp6886]

is the special still available? The link doesn't seem to be working anymore.

[@Ahnestly]

@noahp6886 Thanks for the heads up! KZbin being stupid...links that get too long get truncated and route you to the wrong place! I just used a link converter to make them shorter and yes, deals + codes all still work!

[@noahp6886]

@@Ahnestly awesome, order placed!

[@merishabaldwin9079]

Any idea if the wood can be stained darker?

[@FriedFx]

I bought the Apex Pro from Desk Haus over a year ago (price has gone up since). I love the thing. It's a tank and there have been no issues. I am using a 72x30 dark rubberwood butcher block from Lowes. Best investment ever.

[@jjjjhj128]

hey May i ask about the price when you got it

[@airbanas13]

How was installation for your butcher block from Lowe's? Just used the wood screws included with the Apex Pro and drilled them directly into the butcher block? Pilot holes? Thx in advance!

[@rockbabii]

Thank you for this review. I’ve been wanting to build my own desk for quite awhile since working 100% remote and this video helped me so much! It definitely validated and answered many of the concerns I had with the various desk bases and the other options of buying a whole pre-made desk. I just bought the apex pro with your discount code- I appreciate the saving a few dollars and more than happy to support you in creating great videos like this one :)

[@Ahnestly]

woot woot!! I hope you love it and love the DIY attitude!!

[@manonanisland88]

I like to imagine your house is just a warehouse of desks and chairs.

[@Ahnestly]

It was like that for the better part of 2 years. I finally managed to get to a point where I have a studio...full of desks and chairs. Every day I walk through the maze of chairs and desks and look at my monthly bill for my studio and wonder...why didn't I just review gaming mice!!?!?

[@johnjackson9235]

I just ordered the DeskHaus Apex Pro because of you. Thank you for making this video and enabling me to get a $50 discount (since I used your code). I can't wait to get the frame and put my desk together.

[@Ahnestly]

First of all, thank YOU for the kind words. Also, using my coupon earns me small commission, which helps me keep making videos like these. Thank you!!!! And I know you’re gonna love it!!

[@decisive-dolphin]

world's most sponsored comment

[@Ahnestly]

Not used to people being kind? In any case, I hope your days are filled with kindness, friend.

[@decisive-dolphin]

@@Ahnestly I mean, I thought it was pretty clear that I was joking but if you felt the need to defend yourself by behaving perfunctory as a response now im suspicious 👀

[@Ahnestly]

@@decisive-dolphinIts always difficult to tell whether a comment is being hostile or joking. More so bc it was like 4 words! I admit, I did assume your comment was hostile to the OP who was showing kindness. Because of that, my comment was asking “why do you feel the need to be hostile to someone who’s being kind?”, but also, I was genuinely hoping your days would be filled with kindness! I prob misread your comment bc I’m dumb (I had to look up ‘perfunctory’ lol). In any case, I saw you commented on my other vid and thank you for your support. I hope the stability test at the end of this video speaks for itself and let me know how you like it!

[@JYoutubes10]

I waited for a sale and got the 60"x30" from Vari for under $600 with tax. I use it around 45" when standing and it is very stable. No wobble unless I'm actively trying to shake the desk; even then I only get a little monitor shake. The Deskhaus 20-year leg warranty is pretty sick though.

[@frozentundra7446]

Consider yourself lucky, on the website the 60x30 is going for $1,900 bucks!🤷‍♂🤷‍♂🤷‍♂

[@abgvedr]

Legend

[@rubberduck5837]

What a thorough review. Excellent job. Most reviews out there lack the comparative details and industry knowledge.

[@Ahnestly]

Thank you! Appreciate that!

[@spdcrzy]

Flexispot makes the E7Q "Odin" now that also has the quad motor quad leg design, and it's arguably even more robust than this design because the legs are pushed all the way out to the corners of the frame. AND it goes just as low as this desk. I'd love to see a comparison between that and the Deskhaus Apex Pro.

[@Ahnestly]

I've been in talks! Stay posted!

[@allen7615]

He didn’t really use products that are equally as close to the deskhaus. Like the uplift 4 leg commercial and evodesk FX package. I wish he did

[@Ahnestly]

@allen7615 the starting price of uplift 4 leg with laminate top (30x60) is $1,200. Desk Haus with a real rubber wood top (30x60) is $1052 with my code ($1,100 without code). The Evodesk is over 2x the price. Looks fancy, but quite pricey! Other factors to consider: Desk Haus is made in America and In terms of warranty and customer service, I’ve seen desk haus really active on both Standing Desk and Desk Haus forums. Uplift is not made in America, not sure what their customer service is like. I don’t know much about Evodesk unfortunately!

[@andrewhua4972]

Deskhaus is easily the future of standing desks. The double leg design is incredible not to mention the support is fantastic.

[@jp6951]

Yes, those double legs really make it sturdy. The other critical component is the horizontal brace that connects the legs. My Uplift Conference Desk is like that, only the legs are spaced further apart than the Deskhaus which makes it even more sturdy!

[@mashurai]

I appreciate the review, but it's unfortunate that Deskhaus has their reviews managed by such an unprofessional individual. The review on the Magnus Pro XL was particularly disappointing; their attitude was so poor that I felt embarrassed for them. While their desks appear to be nice, I can't support a company that responds to criticism with insults and disparaging remarks, especially when it concerns products significantly cheaper than their top-of-the-line offerings. It’s quite off-putting.

[@marcellofrisina6460]

Which review are you referring to? I’m considering getting a Deskhaus and it’s a bit unsettling how much positivity there is out there for this brand, odd that I can’t find unsatisfied reviewers at all. I’m curious to hear an alternative perspective before I make my decision

[@mashurai]

@@marcellofrisina6460 kzbin.info/www/bejne/Z4HCYoWYgZprqMU Everyone has their own reviews towards a product, whether they like it or not is fine, but how you respond and represent yourself in your own videos is another problem in and of itself, especially coming from a business. In this video, his snarky remarks to others is especially disappointing considering how he could respond being a business and all.

[@jdsd_]

@@marcellofrisina6460 There is a video on youtube where the Deskhouse guy literally sh*t talks the magnus pro like a 6 year old kid. Its very immature and awkward. Ill never buy something from a company who does marketing this way.

[@marcellofrisina6460]

@@jdsd_ Yeah I’ve been checking out the Deskhaus page and it’s all absurdly biased content. I actually haven’t been able to find a SINGLE non-biased review of a standing desk. They’re all sponsored. Like you said, Deskhaus’ page is obviously biased and full of showmanship, and Flexispot is probably the worst when it comes to planting biased reviews. It’s been a strange and frustrating experience trying to buy a standing desk, that’s for sure

[@Gamefreak2998]

Its less professional to use anonymous accounts to start a flame war over actually discussing your flaws with competition

[@JapaneseCharacterNameMan]

Incredible. I was considering pulling the trigger on the Magnus, but now I'm sold on getting an Apex Pro and using is it to build the perfect setup for my needs. Kudos

[@Ahnestly]

Heyyyyyy!!! Nice!!! You will NOT regret it. Love this freaking tank of a desk!!! Don't forget to use my coupon code!!

[@FactsBrakeStupidity]

That's a great review, thanks! Got the Apex Pros for my wife's office - I'm super jealous, I want a set for myself now, but I already finished my set up.

[@amarshall621]

Yep Deskhaus is super legit. I just bought a second apex base for my office. Couldnt be happier on the purchases.

[@theoriginalrjt21]

I have an Apex Pro since 2022 and it has been great. Got it in a closeout package with a top and a free power outlet. Mounted 2 dual monitor Monoprice arms and hung my mid-tower PC off the top on one end.

[@schoocg]

Bless you bless you bless you!!!! Yes I have a computer but it’s connected to very expensive, sensitive electronics. I am not a content creator but very similar needs to stand a lot mainly because of a handy cap that standing is the best for me. Everything I have seen , wouldn’t call them junk , but the wiggling is far too much especially for what they are asking. So yes they are junk for what they are asking for them . Not looking for low cost looking for a great product at a fair price. And the DESKHAUS looks like exactly what might fit my needs and pocket book. And coincidentally they are made only 30 miles North of me in Western Michigan. A win win. Thank you so much for making this great honest video . Greg

[@Ahnestly]

Nice!! You should email Chris and ask if you can visit his warehouse! When I went, he showed me all the standing desks from the various brands and we did shake comparisons. It was wild - even the $1,000+ desks from Steelcase, Herman Miller, etc - all wobbly!!

[@schoocg]

@@Ahnestly thank you and neighbor is going to take me.

[@schoocg]

@@Ahnestlytalked to Derek today and friend driving me to get there 30x60 Apex Pro Max with a butcher board top in two days. Thank you again for your review and sending me to the best of the best.

[@Moore3021]

I'm really debating on buying a desk like this... I was thinking secret labs. but you just sold me on this desk. I currently have this wooden desk, that is split in the middle. It's not horrible but my brother complains about how you can't put your legs under it. So, I'm patiently waiting and looking for the perfect desk. And I think you just introduced me to the future of my house's new furniture. and for that. Thank You!!

[@gregoryhwin]

I would imagined the L-shaped desks are much, much more stable by the nature of their geometry. Would love to see your reviews on these. Btw, this video was an eye opener. Thank you for your top notch review and Ahnesty. :-)

[@gregoryhwin]

I, myself, am looking at the Fezibo Triple Motor L-shaped 63 with the Ergonomic Monitor stand shelf that goes the full L. Yes, it's a budget model but still at the $500-$600 range. Would love to hear what you have to say about this.

[@Ahnestly]

I wish I could say definitively, but I'm not sure! I do imagine it would help though, but I'm always surprised by the things I find when actually testing!

[@YoloVib3s]

Thanks for this info. I’ve been looking at getting the Samsung ARK monitor & have been hesitant due to the stability, weight capacity & desktop size options. However you just pointed me in the right direction to solve all my problems!!

[@Tully-Henderson]

I’m glad someone is finally bringing Deskhaus to the conversation. I’ve had their Apex Pro with a walnut butcher block island countertop for almost 2 years now and it’s blown every other desk I’ve had out of the water. So much so I’ve sold my Fully Jarvis and will be making mine into an L shaped version

[@prefescent4460]

How will you turn this desk L shaped?

[@GeeForceQ17]

Excellent review! Thank you for your honesty.

[@kmocordoba]

Really great call on the 4 legs stability. Thank you!

[@zealousbeing0178]

If I'll be honest, if we're talking about features and functionality. I like the Secretlabs, stability is nice and everything. But being able to crouch on the floor, or stand as tall as you want is extras that don't need so much consideration. If I can get integrated controls for the desktop, gladly, if I can get a great cable management ecosystem, even better. If I can get a PSU that's jammed into the leg of the table, that's a game changer. I want things like this with Deskhaus, but simply put, their desks look like they need more to them, which is why I'm not willing to spend as much for one. When I can spend as much as I did, getting a secretlabs

[@zerofrost4728]

I am the same way. I look at the review for SecretLabs Magnus pro, and the stability is a con for me. All their pros outweighs that one con for me though. Magnetic headphone holder, Pc mount, cable management, and all the other attachments they offer is amazing to have.

[@nerissaBee615]

6/24/2024 - Like your style and how you keep it real. Looking for a stand up desk for my 6' boyfriend who works from home and his 50 year-ol body needs a better way to spend 8 hours each day. He sits. I love the stability point - so true. Thank you for being you and providing these fun video reviews. (Tennessee)

[@johne4798]

I'm 6'1 and age 56 and I work from home 100% of the time as well. What desk did you end up going with, if you don't mind my asking?

[@manalili_p2900]

Ordered mine a few days ago because of this video! I'm hype!

[@Ahnestly]

Woot woot!!!

[@kumarsalib722]

How well does Deskhaus honor the warranty? Will it be around in 20 years? How big is their service department?

[@velse9869]

HE JUST SAID (IF YOU WATCHED THE VIDEO) THAT IT'S 4 PEOPLE

[@jp6951]

I recently bought an Uplift Adjustable Height Conference Desk - 8' x 3'-6" (96" x 42")with bamboo top. It's expandable to 9' x 3'-6" (108" x 42"). I have the expansion leaf but my room would be too cramped at the 9' length. I added heavy-duty casters so I can move the desk around. The desk is absolutely rock solid and sturdy. It has 4 heavy metal legs and horizontal support bars connecting two legs on each side. The desk is so heavy the instructions recommended that 4 people flip it over. I flipped in on my own but it was quite challenging. Shipping was amazing with everything properly padded and protected. The electrical operation is super smooth and I added a Bluetooth dongle so it can be controlled by an Android or iPhone. It all just works. If my room was larger I would have gotten the 9' x 5' (108" x 60") ping pong version. But my desk is big enough for back-to-back 48" OLED screens so I can sit on either side of the desk. The desk is freestanding. I want to do a review when everything is all set up because it is really something to see.

[@Ahnestly]

Happy for you! The biggest difference here between uplift and deskhaus is really the price, warranty, and where it’s made. After all, if it has 4 legs, well, they’re all gonna be similar! Hope you enjoy your setup!

[@jp6951]

Forgot to add. Also bought 4 hooks, these still have to be mounted, two on each side.

[@bdabbin]

The honesty here has sold me on Deskhaus. Thanks for the advice.

[@ulaulalaulaulala]

Wow, I saw a Steelcase Karman !!!! When is the video coming out?

[@singhVarunVikram]

more weight would shift the center of gravity UP and the higher it is the more you got to unstable equilibrium. This is school level physics. Why would anyone assume it would be stable equilibrium ? This is also why CARS try to keep the CG low to attain better equilibrium

[@Ahnestly]

someone buy this man a beer.

[@singhVarunVikram]

@@Ahnestly thanks for the gesture but I don't drink :)

[@koreanman5]

Hi @ahnestly!! A wonderful review! I just wanted to ask, could you let us know what size is your table top and where did you buy it? I really like the size of it but when I clicked on the coupon of them offering it, it is empty :( any feedback is appreciated! Thank you!

[@ChristopherLeePup]

I'm really glad you're doing a Deskhaus review. II went the Vertex legs diamond option given it's built like a tank.

[@kynesilagan2676]

Thanks for the save. Glad i found this vid before buying. 'But it nice or buy it twice'- applicable here

[@solrax6026]

THATS WHATS UP! When i get my first standing desk im getting the Apex pro. Thanks man

[@Ahnestly]

woot woot! Use my code tog et your discount!!

[@thunderstar254]

Great review! Did I miss you going over measurements? I didn't see how one gets a custom top from them as opposed to the prefab blocks, but how difficult would it be to drill and install your own custom wooden top? 30" depth is too little, 36" is much better

[@Ahnestly]

Hey! I don't think they offer custom tops, but you could always reach out to their customer service and see if they do it. Installing your own desktop is SUPER easy. align the desk how you want it, then just screw in from the bottom. This is the main benefit - you don't need to buy a top from them, can go get your own cheapo one from Ikea or crazy uber expensive end game one elsewhere!

[@thunderstar254]

@@Ahnestly Wow ok awesome!! One final thing, do you know what thickness a butcher block should have for this purpose and why? 1.5" +? Is there any advantage to thicker blocks other than higher weight capacity? Seems like a block that size would weigh ~100lbs, while the deskhaus legs can hold 650

[@Ahnestly]

@@thunderstar254 Thicker is usually better if you're going to weigh it down. A thinner top will flex easier than a thicker one. 1.5" sounds great as a minimum!

[@thunderstar254]

@@Ahnestly That makes sense, got it! Thanks very much

[@BarrettRodriguez]

I'm sure this is a beautiful desk but I have a Vivo desk that has served me well. It doesn't wobble unless I put weight behind it, it goes low, rises to a comfortable height, has presets, and you can buy accessories for it including wheels but note that wheels will rise the top by a few inches. It's less expensive but I am satisfied. I guess one should check out a variety.

[@Joe-mz6dc]

Definitely. One thing that doesn't get discussed a lot in these reviews is exactly how you are using the desk. In my case I work in information technology and I have a laptop with a dock and a monitor. One monitor. It's all very light and all I want is something that is functional and good quality. I'm not looking for something that can lift 140 lb of Hardware up and down LOL

[@Ahnestly]

The major point of this video was to just showcase that paying a premium for “well known” desk brands (aka those that spend lots of $ on ads) does not get you a better desk when it comes to stability for people above 5’8. You can see in the tests with the other desks don’t have much weight on them, and they still wobble that hard!!

[@CoZChristopher]

nice vid brother!! I actually purchased the frame back in January and have not purchased a table top yet. I want one of theirs, but will need to pay for that later! But love these desks and their brand!! Such a solid brand!!!

[@MOAB-UT]

Have you considered a slick glass desktop? I might do that. I would cut it so only the main section, including area with the monitors needs to rise up...maybe a nice 48" wide section. No need to stress the motors lifting a 60" or wider area everyday if it is not necessary IMO.

[@stinkratgaming]

I have been doing TONS of research on standing desks these past few days and settled on Deskhaus for their appearance of quality and care... but I cannot for the life of me find any comparisons between the Apex Pro (34 legs from this video) against the Apex (just two legs). There is a ~$400 price difference between two frames. Im 5'8" so the desks would probably need to be go up to ~43". Im not super stressed about some shake (I have an awful and shaky ikea normal desk and its never bothered me much). I decided to "risk" the two leg apex model and will update this comment on my findings and keep it ahnest.

[@sn1p3r847]

I'm actually in shock about the Magnus Pro, I basically had my credit card in hand to buy it but didn't even think it would be so unstable. Stability in the desk is top priority for me as you mentioned, I have tens of thousands of dollars of equipment on my desk and use it every day for long periods of time.

[@Ahnestly]

Desk haus put out a video showing how unstable it was. I did not believe it until I tested it myself

[@tommybush7041]

Will the walnut top get water marks on it if a drink is left in it or is it a sealed wooden surface?

[@Ahnestly]

This is a good question and I'm not sure what the answer is. The finish is slightly sheen, but I don't ever feel comfortable leaving a glass of water bare on top of any wood surface. I always use a coaster!

[@Nargon604]

A 20-year warranty is nice idea, but keep in that when a company goes out of business, its warranties and services often die unless other agreements have been made. Deskhaus was founded in 2020. I do hope they will be around in 20 years to honour their warranty!

[@michaellawrence1601]

Also who cares if it wobbles wrf are these people doing on their desks

[@Ahnestly]

Typing? Lol

[@Ahnestly]

….and dirty things 😈😈😈

[@michaellawrence1601]

@@Ahnestlywell now I’m probably gonna get one 😂

[@Ahnestly]

@@michaellawrence1601 …to do dirty things? Pictures or it didn’t happen….LOL

[@kolbolt]

Thanks mate. This was exactly what I was looking for

[@Ahnestly]

You’re very welcome!

[@MJDreams]

Ikea idasen desk for around 740 eur two years ago is very stable desk as the legs construction is different and solid

[@DavidTrejo]

Yep. Love mine so much that I bought a second for a treadmill desk setup. Built like tanks and the motors can even handle a 48in oled 😁

[@callmeseags]

I think people who are looking at these desks are individuals like myself who work from home and game / stream. This isnt a desk for anyone who just wants a basic desk and seems to be the solid take i find going around. Most people complaining about expensive motorized desks are not paying more than $3-500 and my chair alone is almost $600 because i work from home.

[@Dr.Stasis]

I'm surprised more people haven't done videos on Deskhaus products.

[@robgrossi2368]

What do you think of the Apex Pro Max with the cross bracing? Overkill??? I'd just go for the Max but it adds a lot of weight to an already heavy base....

[@Ahnestly]

Personally, I’d say overkill, but that depends on your needs. The apex pro is a tank already. Keep in mind that there is no discount code for the pro max! And yes, legs are pretty heavy hahaha

[@robgrossi2368]

@@Ahnestly thanks for your response and your great video!

[@auzimatic]

Do you have any insight into regular (not standing) desks with a wooden top? With the standing desk hype it's hard to find that more simple option with a nice wood finished top.

[@yonallb]

Looking for the same.

[@iTzNabGamingPvP]

i would be interested in a stability comparison to the new(?) flexispot e7q wich also has for legs.

[@CraigWedd]

i cant wait for my magnus pro to arrive in 2 days 🙌🙌 super excited

[@Ahnestly]

Hey as long as you’re happy with your purchase! I’m just here to inform y’all with as much info as possible!

[@chrissenefili4971]

Thanks bro, my office asked me to pick one now with this I'm set

[@mmssus]

You said that the most stable is not necessarily the most expensive in the beginning, but Apex Pro legs alone are almost $1k add to that another ~$1k for the top, that's ~$2k without any accessory.

[@Ahnestly]

You don’t have to buy a table top from desk haus. Thats the beauty of it. You can buy a $20 table top from ikea if you wanted and just install it (literally just screw it in from the bottom). The $1k table top is a real wood table top - you can purchase something like this at a later time. What you won’t be able to purchase is more stable legs.

[@jessecostello1406]

When looking for a new office or gaming setup item I always watch your videos. While these desks. I'm looking for a long table at least 72 in or 80" x 30 wide is there a brand that you would recommend?

[@Ahnestly]

Hey! Thanks for the super kind words!! Depends on what you're looking for. If a budget option, I believe Ikea has a couple options. Home Depot/Lowes may have some options too for particleboard I think. If you want solid wood, Desk Haus has their solid wood top (which you see in my video), which isn't cheap, but usually cheaper than boutique custom table top shops (since it's produced in mass). Highest tier option is to get it made at a boutique/wood shop!

[@jessecostello1406]

I've been looking at the uplift v2, v2 commercial and the flexispot e7 pro.

[@jessecostello1406]

And of course the secret lab. Oh so out of the three secret lab flexi spot or uplift I'm at a loss in which one would be more sturdy in 72 or 80"?

[@Ahnestly]

@@jessecostello1406 I'm confused haha. Desk Haus Apex Pro + buying a 72x30 or 80x30 tabletop from another place is my go-to if you want most sturdy + solid customer service. Secretlab was shockingly unstable. Flexispot customer service is reported to be pretty awful. Uplift costs more than Desk Haus, but not as stable.

[@jessecostello1406]

No thank you for you're always such wonderful timely replies. So if it comes down actually purchasing one thats put together already I think I will be staying with the uplift.

[@davidbo3788]

You say the desk only goes does down to 24.5". I just checked mine and the paddle displayed it was 23" and when I measured it, it was 23" (with my 1" top). It's a great desk.

[@sudhamsh0310]

Thanks for the video. What is the min-max range for wood top (width) for this particular Deskhaus ?

[@Ahnestly]

It can get insanely wide...but that might be a question you want to ask directly to Desk Haus!

[@joshowens2219]

The desk you want. With no issues when raised. Costco - ApexDesk Elite Series 71” x 33” Height Adjustable Desk

[@BALON3Y]

Nice video Dan. I purchased two fully jarvis bamboo desks and I regret it. I should have been patient and purchased the deskhaus. My fully desks aren't even stable at normal sitting height. I tend to keep my wrists/elbows on the desk when I type. When I do that, it pushes down on the desk way too much causing my monitors to wobble. In my opinion, that should not happen. My autonomous doesn't even do that. Either way, they are fine for now and at least they look nice.

[@MOAB-UT]

Nothing a quick trip to Home Depot can't fix- easily. Do you have a wall nearby? I would arrange something- maybe a sliding rail track or two. Should be a fun weekend project. I am looking now. Any recommendations? I was thinking this or an autonomous frame. I will buy a glass top.

[@Ahnestly]

Bro, what do you do for a living? Because I break every project I ever take on for a living. I used to think I was cursed, but after you’ve broken as many things as I have, I’m pretty sure it’s a skill.

[@MOAB-UT]

Why not reinforce it with $20 worth of supports from Home Depot...if you have it against at least one wall. That would stiffen it right up. I plan to do this.

[@zenjinneering]

@@Ahnestlybro, what are you doing with your desk that requires the level of stability you keep hammering on in your review? Because every time I use even the cheapest of standing desks as a fellow 5'6" King I do *not* run into any stability issues that you're claiming here in your review. As with @zealousbeing0178 and @zerofrost478 I'm planning on going secret labs for the vast number of pros it brings to the table: organization + cable management, size, integrated power, aesthetic, etc. I won't fight you on the warranty though, 20 years is nuts. Assuming they're still around in 20 years - that's a pretty beefy bet with a team of 4 but I'm here for it!

[@zenjinneering]

@@MOAB-UT while I too am a DIjunkY if you're spending serious cash on a product it should suit your needs out of the box. Not everything needs to be a project. I'm up to my ears in projects at home. I still give you a thumbs up for the argument given that I don't think stability *is* an issue personally. I just don't personally think if I buy something it's warranted to become a DIY. I want a solution, not a project if I'm spending that kind of money. Especially for something as commonly used as a desk.

[@visiblehiggs130]

II am very interested in purchasing it; however, I have some questions that are preventing me from buying it outright. **Question 1: Foot Size.** What size would you recommend, and why does it matter? **Question 2: Countertop.** What do you recommend or own, and what key features should I look for when choosing one? **Additional Notes:** What other key information should I know, and what expectations should I have?

[@Ahnestly]

Hey, for your foot size, def reach out to Deskhaus about what's appropriate. The standard should be fine unless you'r going with some mega ultra desk. For countertop, the biggest factor for me is going to be thickness. I have a 1" all wood desk top but it will bow because it's just not thick enough. The Desk Haus has a HUGE weight rating that you'll never touch, so any top will be fine. Additional Notes: Nothing really. Just be prepared to measure a bit if you go with your own table top (and an electric drill as well)

[@brianwilson7497]

I own this and can confirm it is SO GOOD and incredibly stable when I'm standing at it.

[@agentsmith64]

What about the Nolan from Fully that has 4 regular post legs? I'm asking because it's the prettiest desk BY FAR! It's THE only standing desk that looks like a normal desk and not like an office desk

[@Anonymousb1ack4]

I have a Magnus Pro XL and I dont have hardly any wobble at sitting or standing hight. I am 6'2 and raise the desk to 110 for standing and its pretty solid. I just got it a month ago so I am wondering if they changed something in the desk since this video was made a year or so ago vs now.

[@hometownmediastettler]

What would you recommend for table top options? And do you know what foot size your table has?

[@Ahnestly]

I believe mine is the 27.5". As for table tops, you can go from anything cheapo at Ikea to getting a custom table top done! Desk Haus lists the width to be 43-80" on the 27.5" footsize

[@maximearchambault]

Did you had a look at the new flexispot E7plus .

[@liquidSpin]

I'm not about to power kick my desk. I'm not about to shake the desk as if I'm choking it to death. Secret Lab Magnus Pro XL is perfect. The whole cable rats nest being tucked away out of sight with the built in power connector is a must. I've never had any stability issue but then again I'm not trying to fight my desk 😂

[@Ahnestly]

Loll I hope I didn’t power kick or fight my desk! I barely pushed it forward! But again, stability issues begin after a certain height.

[@liquidSpin]

@@Ahnestly yeah it's when it's almost at max height. It's definitely an issue that can be annoying to tall users

[@AhmedMakkiyah]

How about X desk Terra Pro , I wonder if you can compare it to Deskhaus Apex Pro ?

[@SkyCharter]

Helpful, thanks. Couldn't help but noticing how the fans in your PC stopped when you wiggled the table 10:02.

[@Ahnestly]

Hm so the fans you’re seeing belong to the GPU. the table barely shook, so it’s not bc of the desk - it’s bc of the graphics card fans will turn on and off pretty frequently bc of the temp limits I have set.

[@SkyCharter]

@@Ahnestly Roger that. Thanks!

[@remyblanc6924]

Nice setup! What top are you using??

[@Ahnestly]

Hey! I'm using Desk Haus' 30x72 1.75" solid wood walnut top!

[@remyblanc6924]

Nice thanks , and is this the Apex Pro or The Pro Max?@@Ahnestly

[@Ahnestly]

@@remyblanc6924haha not sure if you’re trolling me... The video is all about the apex pro, so it’s an apex pro!

[@SunnyBanana]

@Ahnestly great video. I'm looking to DIY a standing desk my self. I was just so captivated the entire time by your monitor though. What is? Brand, model... Can you share a link for more details?

[@Ahnestly]

Using a 4K OLED TV as a Monitor? Watch this! kzbin.info/www/bejne/eH2mdI2HrbZmo68 Here you are! If you pick up things, please consider using my links to purchase! Helps the channel a lot! Excited for you and your DIY desk!!

[@williamlewis4379]

Do you know which company makes the Haworth standing desks? Thanks

[@yanichu9454]

I bought the desk after your review, and this was the best decision I ever made!!! This product is SO amazing! I have been watching your video for over a year now, trying to find a chair. However, I just can't pull the trigger without trying the chair. Any suggestions as to where I can go to try those chairs? I am in Southern California

[@BluD]

Whos gonna be rocking their desk sideway. You i answer me because i sometime setup a direct drive wheel so that side to side motion is pretty common. Been looking for a standing desk awhile and was kindve eyeing the e7 plus due to it being much more affordable.

[@thompson4620]

I don't know..... I am 6'4" and the Fully Javis is super solid with a massive 2m oak butcher block top.

[@Ahnestly]

So I think "super solid" means different things to different people. Some people reported wobble, others don't, but there is no defined metric for what is and isn't wobbly (some people might be OK with a little wobble in their monitors, some people are softer typers, some are outright slammers like me, some lean on their desk hard, some don't, etc). I think the biggest issue that I have is that the performance you're getting out of your Fully Jarvis, you could get out of a 2-legged Flexispot desk, which is half the price. These companies are jacking their prices up making you think you're getting better performance, but you're not. That's why I think the Apex Pro is the best - you're actually getting better performance for the increase in price. Meanwhile, there are 2 leg standing desks out there that cost more than the Apex Pro, and again, I think people are thinking they're going to get something more stable for that price bump. At the end of the day, if you're happy with your desk, then screw what I have to say! Enjoy it!

[@Owned_By_Cats]

I am 6'3" (real world, not just tinder) and trying to find anything that didnt want to topple is nearly impossible. After driving as far as 2 hours away to try different desks out I found that only the U or L shaped style desks stand a chance.

[@bendim5865]

Apex Pro is the best home standing desk for the money. I had mine for over a year now and have no regrets!

[@MOAB-UT]

What electronics/motors and gears does it use?

[@hectorg1192]

Can you review the stability of the Flexispot E7 Pro and E7 Plus?

[@trunksy]

Comparison with NewHeights S Series and their not just 20 year but lifetime warranty?

[@alvinroberts3446]

Hi @Ahnestly thank you for this review it is super helpful. I am in the market for a 4 legged standing desk and I'm interested to know your thoughts on other 4 legged standing desk as well, specifically the Flexispot Odin E7Q and the Uplift V2 four legged standing desk. Any thoughts on these and how they might compare to the Deskhaus Apex Pro?

[@Ahnestly]

Hey! I haven't had personal experience with those desks. That is something I want to do in the future / in my new space!

[@alvinroberts3446]

Ok it'd be great to get your thoughts on those!

[@ahmad-safar]

What do you think about IDÅSEN Desk sit/stand, black/dark gray, 63x311/2" - IKEA? Is this competitive to Apex? I was thinking to buy IDASEN but now I seen your video it made me make sure which one is the best in term of sturdiness

[@henneld_edu9602]

Did you get the tabletop from Desk Haus as well? I am on the market and I'm intrigued by this desk. But if pairing the apex pro with their hardwood top it looks like I'm at $2500

[@Ahnestly]

hey! I got mine from Desk Haus, but the beauty of it is that you can get whatever desk top you want and just screw it in from the bottom! I mentioned this in the video (very briefly though!) and IMHO is one of the benefits of getting sturdier legs. You can always upgrade to a fancy top later down the line, but you can't ever swap out your legs!!

[@thekeyboardzone-kas]

Thank you for one of the best vids I've ever seen on standing desks. My desk wobbles, and I always assumed it's because my 70-year-old weak hands, with the help of my daughter, just didn't screw things together tight enough during assembly. I had no idea it was a common thing among all two-legged desks! On another note, I'm curious as to what monitor you are using as well as the stand (which appears to be two pieces, but hard to tell). I have a 34" and 27" monitor, and I've been wanting to go to something larger (ideally 48"), but every monitor I've looked at gets mixed reviews. So I'm curious if you're happy with yours, and if so, what it is exactly. Thanks again for a great vid! Karen 😊

[@Ahnestly]

First of all, SO COOL that you're way outside my usual demographic and looking into this stuff. I don't have a review on the screen, but I do talk about some highlights, as well as various hacks for using this as a monitor in this video! kzbin.info/www/bejne/eH2mdI2HrbZmo68 Hope this helps! Please reach out if you have any additional questions!!

[@thekeyboardzone-kas]

@@Ahnestly - Wow, Dan. Thanks so much for the oh-so-speedy response! I'm old, not dead LOL. I still work full time (from home), doing a mix of legal transcription, copy editing, and a bit of geeky stuff. I love it, and I plan to work right up until they come to wheel me to the crematory LOL! I spend most of my discretionary $$$ on new toys for my office, so I always have my radar set high for new places to push the "Add to Cart" button LOL. I follow quite a few tech gurus and others who cover office-centric topics such as furniture, lighting, etc. I haven't come across you before, but I'm happy that I did stumble across you on my sidebar yesterday. I am now a subscriber, and I look forward to checking out your other vids. I suspect most of them, including you, could qualify to be my grandkids. That's okay. I love watching all of you! It keeps me young - as well as entertained and informed, as well as broke LOL. -Karen 😉 P.S. What a clever and cool channel name. I love it when people are able to incorporate their own names into creative and meaningful monikers to use for business or pleasure. Well done!

[@malobuchino]

I am surprised what a low level of likes this video has, it's superb

[@Ahnestly]

Hey! I appreciate it! Haha worked really hard on it to get all the b roll just right!

[@applepieclub5012]

I appreciate the video! However, almost a grand for just the base of a motorized desk is a bit absurd. I thought paying a grand from the secret labs pro desk was absurd but deskhaus definitely takes the cake lol.

[@kennuimuffins2426]

Well it depends on how much use you'll get out of it. Expensive yes, absurd, no. Someone working from home and regularly adjusting the height would benefit more than someone who uses it for a few hours after work. Same deal with high end chairs. I have a second hand aeron but bought a leap v2 brand new because I know i'm going to get a lot of use out of them. I didn't want to spend time and money exploring cheaper options. Something not discussed or mentioned were the motors. Some people value them a lot more and i've heard linak brand motors are the ones to aim for. The market is flooded with cheap chinese motors that overheat, are noisy or slow. I would want to know more about the motors before dropping that kind of cash.

[@songolin4544]

Ahnestly absurdly expensive.

[@snoozyA113]

Great video. I just wish there was a better space for art students and students in general because we usually never have the budget for the better desks 😭🙏🏾

[@MatthewStephenson]

great review...thank you!

[@Ahnestly]

Really glad it helped. It took a lot of time trying to get everything perfectly even and leveled across the board and then recording every aspect! So really appreciate the kind words!

[@samnicholls1360]

Awesome review! How do the desks compare on solid floors.. aka no carpet? Same results?

[@Ahnestly]

Check out Desk Haus' channel. He does a lot of demonstrations and makes sure to balance them. I unfortunately don't have hard floors here (and it would be an issue when it came to echo in my audio!)

[@Caseylawton]

The camera angles make those desks look MASSIVE! 🤣🤣

[@Ahnestly]

LOL naw im just short!

[@Real28]

I built my own using the autonomous pro legs on a completely custom desktop made of a rare maple. I have 3, 27" monitors attached to it AND 2 full size PCs on it. My gaming machine AND a server, both in full/mid size towers (Lian Li O11 Dynamic XL and an older NZXT) I also have a work laptop, mouse, keyboard and a VR headset on it. I'm 6ft tall, I have to raise it pretty high when I'm standing for work. I don't really experience the kind of wobble you are showing, not anywhere close. It's sitting on a flat, hard floor. So maybe you're exaggerating the wobble or the top of my desk is better at dealing with the movement, but I've been using it now for a couple years and it's been rock solid, one of the best decisions I've made since going WFH. Respectfully, you are doing the physics wrong. Having more weight on the table will reduce the amount of force it takes to wobble it a given distance. It will simply require more force than when it's empty. However, once you do get it wobbling, then it will stay in motion longer (Newtons 3rd law) I have probably 200lbs on/clamped to my desk (320lb max) and it doesn't wobble because I won't exert enough pressure to make it move. Sure, the monitors move but they're on arms and they'd wobble on the deskhaus because that's how frequency and vibrations work. Things extended out on an arm will work now more. But the desk itself, it takes A LOT to move, therefore it is stable UNTIL it is pushed hard enough. Which, I have several kids and I tend to lean on it, still haven't had that issue. But having 2 legs per side will do what you show. From years of experience, you're exaggerating the results and you got the math/physics wrong about weight.

[@Ahnestly]

I noted that all the desks in the video are on carpeted floor, which I think many people have as their setup. This is why I did NOT include my standing desks at home in the various comparison shots - it would not be apples to apples. However, In terms of front to back wobble, my autonomous ergo pro still wobbles quite a bit at the higher heights. When you’re working, you may not experience a lot of wobble, but try taking your hand and pushing the front edge of your table top hard a few times. That’ll get the desk going. It may translate to slight shakes when working, but if leaning or you bump or something, means a bigger wobble. I went to Desk Haus’ warehouse, checked all the bolts/screws, and shook them myself and saw how much even high end standing desks from Herman miller, steelcase, autonomous, uplift, etc all wobble

[@Cobinja]

What I noticed with my Fully Jarvis is that it has quite a lot of give when leaning into the desk, which especially bothers me when letting go. I think it's because it's a C frame compared to a T frame. Btw: Is that chair a Steelcase Karman in the video?

[@Ahnestly]

Yes. Yes it is :D

[@BALON3Y]

I noticed the same thing with mine! Very disappointing.

[@Cobinja]

@@BALON3Y I'm glad (I didn't do it wrong) and not glad (general problem?) at the same time that mine is not the only one.

[@sp6213]

I don’t have this problem with my Jarvis at *all*. It’s really, really stable. Might also be because I’ve got a heavy 4cm thick massive oak desktop installed on it, not sure.

[@Ahnestly]

@@sp6213 is your desk at the 44” mark or higher as I mentioned? All 2 leg standing desks do this. There are no exceptions. I have gotten to test more desks even on hard floors and they’re all the same.

[@nednedelkov7852]

@Ahnestly, thank you for this review and for the tips. As a person who is not from USA I would to ask a few questions: Do they sell these desks and frames only in USA? Is there any distributor who is working with DeskHaus and selling their products for other countries? For example, do they have distributors for Europe?

[@Ahnestly]

I really wish they did, but I don’t think they have any interest selling overseas…from my talks with deskhaus, they want to focus on providing the best products, not making the most money possible. That’s why I was so eager to partner with Chris and the guys at deskhaus! Sorry that’s prob not what you wanted to hear :(

[@nednedelkov7852]

​@@Ahnestly, thanks for your honest answer. I do not have doubts in their products and from what I've seen I'm overwhelmingly positive about their frames/legs! In my opinion one of the best I've seen and I believe that the price is worth for this product in long term. I would be happy if they decide to establish shop or representatives in Bulgaria. Their producs provide extreme quality and it will be a shame not to share it with the rest of the world. People who care about their working stations will want only the best. A good investment in long term period always worth the money. Thank you for your answer again!

[@Mauglus]

@@Ahnestly I also would like a amazing desk for my homeoffice. I already bougt the Aeron and Embody because of your recommendations. I live in Switzerland and I am willing to spend up to 2000 dollar. Unfortunately the deskhaus is only available in USA. I am considering the uplift, but it has 1340 dollar shipping cost. That is way too much in my opinion. 500 Dollar shipping cost would be fine for me. Any alternative suggestions? Stability is the most important factor for me

[@MrReese]

Of course it should be mentioned that several other companies (like Flexispot) also have desks with four feet...for a lower price.

[@MajorTendonitis]

Liked and subscribed, hope your channel does well . I had no idea there was a standing desks with four legs , interesting. Thanks for posting this

[@Ahnestly]

Thanks for the kind words! Yeah they kinda fly under the radar, and I don't know why!

[@MajorTendonitis]

@@Ahnestly the bad news is I’m in Canada ,and they only ship to 48 states . There is a shipping depot in the US a few hours from me in Montana , but I don’t have a passport :(

[@yacchan03]

anyone know what alternative there is for people living in europe?

[@Jon.]

About what could we expect the price range to be for the Marco Polo woodwork top you used for your apex pro ? Thanks!

[@Ahnestly]

hey! so for this desk, I'm actually using Desk Haus' table top. Because of the weight I exert on it, I thought it would be better to get something thicker (Desk Haus is 1.75" thick I believe)! It's objectively not cheap, but relative to other brands selling the desk top in similar size and dimensions, it was a better value. Hope this helps!

[@johnnyoneill1676]

Is this proudct only available in the US? Seems like they dont ship to UK :(

[@Shaneub]

Hey what table top are you using in this video? It looks great

[@tscale3266]

6ft tall Looking for tall table for djing good to know I probably need 4 legs any recommendations for my specific search

[@Ahnestly]

Man...if only there was a video that showcased a 4 legged desk... LOL in all seriousness...why wouldn't the deskhaus one work? You can put whatever table top you wanted on it

[@Shishiku91]

These reviews are paid bro. I have the Magnus pro. Another buddy has the uplift. Both work fine. Both think the Magnus is better for home office and potentially your dj setup if for no other reason than cable management superiority. Why this man is riding the dick of deskhaus is beyond me. Idk many ppl who spend $2000+ dollars for desk to only babble to me that it’s sturdier…barely. Ppl are working and gaming not doing body shots and WWE. I run my FLX10 on the magnus pro and it’s good.

[@BlakeC341]

Glad I saw this before buying the Secret Lab desk. I'm 6'1" so that would've been a big mistake.

[@ahhyepable]

Beautiful Setup - I'm currently in the process of building a house and it'll be done in 4 months. I'll have a dedicated office and I want my desk to be in the middle of the room. Like your setup, looks nice and clean, cables look OK, hoping to get them really well managed, I want to switch to a standing desk so I can have an under-desk treadmill and some additional flexibility as well. Do you have a setup for your PC/cables/etc? I just stumbled on your channel and looking to emulate what you got going on. Thanks! Looks like you have an external GPU setup too. :)

[@Ahnestly]

This is my most recent desk setup video - kzbin.info/www/bejne/Z6OxZ5p5f9mKiLs

[@ahhyepable]

@@Ahnestly Awesome, thanks! How are you doing your cable management, and are you using the Razer Core + a laptop?

[@loganmichalak300]

What size options would you recommend? I see they have 23.5 - 39.5 is that the width?

[@Ahnestly]

I believe so, since the top frame can be extended out for larger desks!

[@basedmuslimbooks]

6 standing desks.. get 4 more and you have stairs for really wide giant dwarfs

[@Ahnestly]

or a 1v1v1v1v1v1v1v1v1v1 soccer match

[@Ivan_AUS]

How does this fair with the Ikea Idasen standing desk? I felt that the Idasen was def more stable then these single pole legs because it has the angled truss down the bottom

[@MOAB-UT]

It is stable but very weak motor that will eventually fail. Their warranty policy may or may not cover it. Their tops are bad.

[@johndough7039]

excellent video, I just liked and subscribed, do you have any videos that helps people figure out what size desk and foot to get?

[@Ahnestly]

Recommend you send an email to desk haus! I think their customer service can def help! For reference, my desk is 72x31” and I got the standard apex pro.