I Put A GHOST RACING Engine in a Toddler Sized RACECAR BED!

[@thundercrowz]

Makeing a custom exhaust that replaces the plastic ones would be awesome

[@phattony9057]

was gonna say the same thing so looked for the comment 1st....but yes cut out the plastic exhaust and make the real one go in place

[@9dvds]

@@phattony9057 the heat from the exhaust would melt the body

[@subscribeifyouaresussybaka2356]

True

[@KKDriver]

@@9dvdsprobably not… especially if he distanced them a little. then again if it does burn, it adds character to the build.

[@jwalster9412]

Titanium exhaust.

[@crazylife6319]

not gon lie, thats a smart way to get a cheap go kart body

[@ghomerhust]

it kinda looks like a junior class shifter kart. it's pretty epic

[@ToyotaGuy1971]

And a really cool one, too!

[@deejumsduzall8804]

And the entire body doubles as a substantial bumper 😂

[@SilverXTikal]

I haven’t seen one anywhere besides an abandoned house video xD it’s been over a decade

[@busted2010LT]

Me and my cousin had one, that got passed down and eventually lost but, it was a Ferrari looking one, bright red with a front trunk, big ole wing to put your cars or halo Legos on them😂😂

[@Charliee_Woofy_Pz]

Now that's a literal sleeper build

[@apersunthathasaridiculousl1890]

buh dum tsss

[@Skeeballman64]

Comedy Kryptonite.

[@dustinfurman4045]

You win you’re literally him I’m rolling around on the ground dead ts

[@grant8653]

I like the wider back wheels fits to the car style

[@KODAKJACK47]

Forreal I thought the staggered was rlly cool

[@juliangonzalez9631]

I think the "bubble" tyre look fits the cartoon style body.

[@RokeroLoko]

Yessirr got that stretch 🔥🔥

[@RollinTwentySix]

yoo, stretched tires are like Richard Simmons and RuPaul hosting the Special Olympics. Why would you even want to? lol

[@ragekid6864]

Now just add a small 12v battery in the front and run some headlights and taillights. Then put a spoiler on it. And I’d say maybe think about a TURBO!

[@Cultist564]

and there is no enough room for turbo

[@crockgobbler]

It needs pop up headlights

[@ragekid6864]

@@Cultist564 there is definitely enough room for a turbo. Your trippin. There’s plenty of room.

[@kayagorzan]

Also needs a massive sticker that says TURBO

[@cheepda]

The turbo ain't gonna be that big look at that motor ​@@Cultist564

[@foodiusmaximus]

This was a refreshing approach to build videos. You stated the goals of the project, you built the project and ended with action shots of the finished project. No b-roll antics from shop characters, no moments where you stop to say, “this video brought to you by…” - just a straight forward awesome build. Subscribed

[@SmittyWerbenjagermandragon]

you remember the time when you pretended that your race car bed was an actual race car? this man is ACTUALLY living that dream.

[@jimmy500]

I remember the time I thought my race car was my bed. Things are different now.

[@Montana_Outdoors]

the license plate needs to be sleeper.

[@Steadyy.v]

professional chef

[@6FStyleCo]

Too perfect

[@eln0va126]

or Zzzz

[@frankemro7346]

The more I look at the back, the more I feel SN95 Mustang taillights would work well. The 94 to 95 taillights. Maybe Foxbody LX style tailpipes. Just a thought.

[@RollinTwentySix]

I like your style and eye bro, we are prolly kin in some way lol

[@WooHoo-itsGaryGnu]

I would think 3rd Gen firebird style pop-ups considering the sleek design of the body.

[@Bert114]

Bro Ferrari style LED brick headlights would be cool 😎

[@mitchsterling3266]

The best looking rafe car bed Ive ever seen. Obviously a hard thing not to jump on in terms of a gokart build. Looks like one out of the box. You are so lucky to have a gokart.

[@leonjohnson9433]

pretty cool project. would love to see you add the dual exhaust setup

[@ScottyTownsend91]

I never knew I needed something from my childhood as much as I’m needed this go kart bed. Great build!

[@jeremyoshea7941]

My opinion, great project I picked up a ghost motor for my sons go kart. It’s an old-school Manko and it rips it pretty fast. I think you’ll be impressed with the power you get from that motor. I did have to replace the carburetor carburetor. I got leaks the same as the carburetor I had, I look forward to watching the video. Thanks for sharing and once again great idea.

[@alexhood9438]

that is so freaking awesome you just fulfilled every kids dream that ever slept in that bed popups and lights with dual exhaust would be ultra wicked on this thing ( typed all of this before watching the end of the video you took the words out of my mouth holy crap lol)

[@glassby5882]

the exhaust popping out of the actual exhaust holes would be amazing. The only thing that worries me is how close the exhaust is to the gas tank. As well as the gas line touching parts of the motor that could get quite hot. I would hate to see all of that work burn. Your version of the car bed is BY FAR the best. Looks so freaking cool. Love the idea of pop up head lights. I think in the future it would be super cool to see a full size bed build. Maybe even a full size lifted bed, for mudding or off road karting. You certainly gained a sub my man! hope to see tons of spin offs and an entire series on this!

[@BiGMiAMiTV]

you earned my sub with the support , i love this build , but honestly show me some lights rear lights and front lights make them blinkers some under glow lights make the mufflers out back active!!

[@GHOSTOOW]

Everything is wonderful and complete, but you only need to add a suspension system to the seat only and add a spring under the seat and nothing more.

[@Redbullet242]

So glad to see the exhaust header wrap in the final montage, that plastic fuel tank/header situation was spooky🤣🤣 Great build!

[@gamblerspec]

I know! I wanted to dual it out the back so it was just temporary, but then life happened. I'm going to space the tank up a bit for now and add clearance and duals if there is enough interest in another episode

[@tannerschow1715]

Dude these gokart builds are awesome. Super cool! Just found your channel. Hoping to find one of those toy electric cars converted into a kart.

[@davidpadilla6541]

Pop up headlights will nice👌🏼

[@Mega-P71]

I had this exact bed as a kid lol. This is amazing

[@jeffreymayberry2496]

I think it would be really cool if you converted it like a sized up electric RC car. Since youd have a remote control instead of steering wheel and electric components you might be able to make the seat in to a reclinable bed. Returning the race car bed function not just the aesthetic

[@goonmfg]

So rad! Pop up headlights, led taillights, and see if you can figure out how to put the original 5 spoke plastic "wheels" as hub caps, would me amazing! May e some sorta floating bracket off the kart wheels or something.

[@gamblerspec]

We are definitely on the same wavelength! I actually thought of doing each of those for this one, but it was dragging out. Hopefully there is enough interest for a part 2! Thanks for watching bro!

[@gda882002]

Got to be my favorite build yet , absolutely love it

[@RollinMyOwn]

Cheap joints to move the steering are 1/2" drive universals for sockets. Just weld them in where you need them. Easy way to move things around . I made my sons be able to be driven from the center seat to the right or left seat position. So if you want to be driving solo or give rides to the kids...

[@joaquinsoto4909]

All those ideas are great. You could also cover up the front open space with one of those large blue plastic drums, give it a fake hood.

[@jagab1672]

Bro just casually taught me how to build a go-kart. thank you 🙏🏾

[@vryuki7601]

You're a legend. Some suspension would be badass.

[@LorchVHS]

I wonder what the original white wheel cover things might look like on those wheels and perhaps working tail lights. Pop-up headlights could be awesome if you can make it works.

[@titusphilemonbishophaydenj7074]

I ❤ this build!!! Please add as many extras!! The dual exhaust would be sweet!! No pop up lights! Flush mount LED's Please!!

[@mcguyver6846]

Really cool. I've always wanted to do one of these. . Wanted to make a little bit of a hood further up the wheel wells then makeshift windshield . Would look more like a convertible Corvette sort of thing💯

[@nathanielbarbeau4821]

Cool build! Nice neighborhood! I keep eyeballing that maroon bug eye WRX too.

[@gamblerspec]

Ikr

[@fuselpeter5393]

Definitely the pop up headlights!!!!

[@lancebarrilleaux3919]

Oh , the red bugeye …that is how you know your a car enthusiast 👍😁👍

[@cecilgroomed8365]

Living everyone’s childhood dream. We all wished we could drive the race car beds we were lying in as kids.

[@yaboytl]

would be dope if you could pull up to a car show or drive through, valet or something where people aren't expecting to see such a small car..lol

[@S4WYERonPC]

I would stop riding all my motorcycles and just cruise around town in this thing.....awesome!

[@elbigotesdelatienda]

You should seriously consider throwing in some led headlights and taillights into that! ❤ It even has the shapes molded in the plastic! For the tail ones you could paint the whole 'molded' ones black and fit a couple round ones inside. (Or led strips!) And in the front, fog lights in the holes with a grill in the middle and two round ones on each side above, at both sides of the white logo! Even paint the bumpers black too! And small license plates! 😂 Daaang I'd love to make that myself! Lots of potential! 😅

[@amneziaxeaster-gaming382]

Very nice build. Looks very good. Almost like a mini nascar!

[@Entity_BlackRed777]

Awesome!! And love the Predator engine sounds, especially single cylinder!!! Maybe I would make a mini 2023-24 Silverado 3500HD Dually powered by 2 Predator 420's that could rev up to 9K+ Rpms!!! (Imagine?!)

[@3duckit]

You should put head lights and turn signals and register it to make it road worthy. lol. Great vid!!!!!

[@RollinTwentySix]

ace work, much props - glad you ditched the stretched tire bs with the 6" wheels, just my 2 bits lol

[@3rdjrh]

That’s the coolest thing I’ve seen on the Internet in a while

[@just_zoan]

7:10 Personally I love the fat tires. Got the old muscle car look, Fat meaty tires. Edit: Although those flat tires do look pretty good

[@deadasdico0]

This is ridiculously cool

[@seanmarquand2545]

You built my childhood dream car!!!

[@vdriel]

Insta-suscribe man 👍 Really ingenious project. Wholesome dad. Looking forward to seeing more putting off current projects 😂

[@WooHoo-itsGaryGnu]

OK, this is the coolest go-kart build I have ever seen... If I owned a go-kart track i would pay you to build me 10 of those easily. Air ride suspension or... Hydraulics so you can go to car shows rolling in on 3 wheels.

[@NickAndWolf]

Someone get this man a work bench

[@116RonH]

Definitely would look better with some LED headlights/taillights and dual exhaust tips in the same spots as the bed. Maybe even a grill in the front.

[@andreblair6512]

My goodness me... All I could say during the final drive is, "How perfect is thiiiis!!" Subscribed for sure 💯 Looking at getting a full twin size one for a gaming lounge because of this. I always wanted one as a kid. Now I HAVE to have one! If only you could mass produce these 😭😅

[@bradleyyoung2233]

It would be super sweet to see you paint the body/ lights and give it some chrome for the little fake exhausts haha! Great watch!!

[@simon_969]

Super cool build Perhaps the steering can be cable pulled so it can be lower to the floor without being very sensitive

[@patrickkerr329]

Just found your channel this morning, watched a couple videos. The race car bed is my fav build so far. It’s easy to tell by your son’s excitement and your rad STD shirt that you are definitely not “through being cool!” 😎

[@gamblerspec]

Glad you caught that 😎

[@itsmebdon]

a spoiler would be sick, cool build!

[@JamesBurr-vk7kh]

The tires are great I think, but it's your ride...... Great video

[@juniorzambrano5202]

That current wheel setup looks cool wide in the rear skinny up front I’m a fan of the staggered setup only way I’ve seen to get wide tires for 6” wheel is getting slicks

[@guitarwi3rdo]

17:00 add some 45⁰ pieces to that brake rod setup. Or maybe just another tube or two to join em

[@kenhall9984]

Watching this video made me smile from ear to ear use a fool and I love you for it keep working your magic may God bless you for it

[@CreamAle]

Even the song with the street fighter "perfect" producer tag is hoonigan spec. The golden days of hoonigan are gonna be missed. But this project, is what theirs should've been. I was also disappointed by how theirs turned out. Edit: the entire backing music was perfectly hoonigan. So glad their fans are keeping the spirit going. You got yourself a sub.

[@bucketman5138]

brotherrr this thing is pimp asf you have GOT to make a follow up vid. Pop-ups would go crazy, you should put some led strips in the taillights too

[@TACJHON_]

Bigger engine and maybe make it a shifter for more speed, imagine braking with that

[@notv3253]

Thats actually really really cool, i hope someone would do it with the mcqueen bed

[@Askell_a_don]

I say keep the rear wheel cause they remind me of slicks 😊 great build tho like ur thinking process

[@Kyoju252]

Headlights, fender flares, and a lil windshield would be cool to see!

[@jonathanvandagriff7515]

Dark midnight blue underglow, pop up headlights, functional dual exhaust.

[@Martinchox]

looks good! Does your neighbors like your inventions?

[@gamblerspec]

Absolutely

[@theadvsofzero6887]

cool build would like to see if one can fit a few LED lights into the back and front of the cart make it look much cooler

[@ghomerhust]

the drum brake band might be installed backwards. you always want the pulling force to also follow the rotation of the wheel. ill try to illustrate with typing. kart direction

[@gamblerspec]

It doesn't have the band. It's this drum kit. Works awesome now that i got rid of the bend in the rod. www.bmikarts.com/Complete-6-Brake-Assembly-Drum-Spacer-Hardware_p_3813.html

[@chadmetcalf2876]

Pretty much any suggestions I had have already been addressed in the comments. Love the build, looks great and seems like a blast to ride!

[@robertbennett708]

That's so badass! I probably go extra mile with some simple lights and such 👍🔥

[@AaronSpielman]

This thing is ridiculous, in all the best ways! It looks waaaaaay better than it has any right to. Great stuff! Full lighting would be awesome!

[@DoNE021]

7:40 car looks nice with this wheels.

[@juan-2-many]

18:41 What is that sweet diy looking side x side in the driveway!? I would love to build a street legal one

[@gamblerspec]

It's called the TAZR. Its a 2001 Crown Victoria police interceptor. I have lots of videos on the channel if you want to check it out

[@juan-2-many]

@@gamblerspec will do!

[@pedrokcruz]

Yous should add decals to make it look like a Honda nsx, the body shape already looks like one!

[@armyleegreen]

Really cool build great job

[@ronaldtutorialesgameplaysy4853]

I suggest you add back and front lights and add some decorative intakes

[@Spy_Pigeon_2]

Whats the difference between that long intake tube and a shorter one? Coming off the carb to the motor

[@gamblerspec]

It's supposed to make lower end torque, but honestly I just needed it to fit and run

[@PluggedFaith]

Adding a rollcage, and a custom body kit would look awesome!!! It looks surprisingly good, I would've never thought of using a car bed 😆

[@EWilly-kq7xk]

Awesome build, love the overall process involved in this 👍.

[@ruthless_auto]

He’s living all of our child hood dreams. We all pretended to drive to these and he made it happen

[@liamryan3616]

I had that exact bed when I was 3, that's litterally how it felt going to bed lol

[@elbigotesdelatienda]

Dude, the final result is amazing! It looks freaking awesome! 👌

[@pristboy]

Great project!!! You should try to incorporate the white hub caps I think it will add to the original visual aspect

[@JasonRayShute]

I just hope the tyres are running in the right direction so they don't get chewed out. 😊

[@joshuaanothereraseddad]

That's a nifty build! Did you by chance swap the front tires around to the correct direction though?

[@gamblerspec]

Yep, at the final assembly

[@Muddy_Turtle_Motors]

Dude! This build was awesome! Great job!

[@KOSMOS1701A]

just gotta wire some custom lights into the existing molds, maybe see if you can reuse the original "hub caps" that were on the bed wheels, just to have a bit of a giggle.

[@DetroitMicroSound]

I bet a KT100 would fit in there fine. It needs a tuned pipe, which will really add the extra spice, especially if you put a CRE7 on it. 🏎

[@YourLocalRailfan]

“Ferb, I know what we’re going to do today”

[@asian_raisin]

All smiles here. I've always dreamed of building a go cart since I was pre teen. This gets me all giggly and stuff.

[@Izayoink_Saccuy]

This is sick

[@AntonioG-so4by]

Hellll yeahhh Brotherrrr 🦅

[@myrmidonprogress5423]

It would be sweet to make some custom lights to put in the molded slots

[@Sarcastic-weirdo2043]

Before you got the race bed. Did you ask if the tracking was aligned?

[@codyw0987]

thinking about making something like this with the step2 c6 corvette bed, how long is your gokart and the bed?

[@gamblerspec]

The mattress that would fit inside is about 28" x 52"

[@peacefulscrimp5183]

You have a new subscriber 👍 This was a great video and an amazing build, nearly on par with a grind hard plumbing video but on a smaller scale. I'd really like to see you do a Honda cub 50 with fat tires and ape hangers. I really enjoyed this and I look forward to seeing more fun and unconventional builds.

[@MrCantFly-FpV]

I'm definitely gonna use this on my next build, but instead of the ghost motor ima do a cr145 2 stroke and Makena custom H pattern shifter

[@renaion]

Every body gangster until you get gaped by toddler

[@marcosstables]

😂

[@RealFuzzyPickLE530]

Spelling makes a difference sometimes

[@evangoodman-yb9om]

@@RealFuzzyPickLE530 ayo 🤨

[@Alpaca5089]

Ah yes getting gaped by a toddler😂

[@renaion]

@@Alpaca5089 miss input calm down i ment gapped