Predator 224 build / Ghost Buster

[@julestrdprodjimavicpro2869]

I love my 212 built but LOVE my 224 none built for everyday usage! Your videos are A1 as they say in the Mini Bike Community!

[@milwaukeebrewcrew484]

Dude this is awesome. Love the channel this is the go to channel for mini bikes. I absolutely love everything you do… your never to old to ride mini bikes! I’m 33 my father is 64 and we ride all through the city! Nothing better then riding wheelies on my bt200x down the road with my dad riding one beside me. The heads we turn while riding makes it all worth it.

[@Black66]

Thanks! That's what its all about for sure!

[@NONAME-kw3pu]

thx for telling us the jet size, carb size and altitude so ppl at similar altitudes and builds have a place to start on jet sizes instead of guessing.... with 10 main jets and 10 idle jets... that is 100 jet combos possible... that is a LOT OF trial and error and some of us ... might not have the patience to try all those combos. a must RE see vid series ;)

[@Black66]

Everyone's jetting will be different. I have even had two identical carbs on the same bike and the jetting turned out different from one another. Check out the carb tuning videos on the channel in the carb tuning playlist. Thanks for watching!

[@SpACeCruizeR2o3]

​@@Black66u da man @black66

[@christophermichaels6569]

Makes me excited. Id be building my 224 already but ombwarehouse forgot the 265 cam in my performance kit I got from them. I have some 1.3 arc billet rockers to go with it and I went all out and got the 24mm Mikuni flat slide carb too. So pumped to get working on it.

[@denhamdaves]

The governor hole up top can be used for Pressure release just put a little air filter on there

[@Black66]

Check out the playlist for many engine builds and part combos. Thanks for watching!

[@mikesbarn1858]

You need a one way valve on it.

[@wes89]

​​@@mikesbarn1858A diode!

[@jtg-t9v]

I put a 13horse vintage wisconsin robin engine on mini coleman c100. With the small tires its takes off pretty fast. But with the big coleman tires i had to swap out forks and stretch the rear end a foot longer. Top end 70mph. Scary fast

[@morethenenough]

Hey my friend told me about you. You went right by my house in this one Have fun

[@timbattle3415]

I had the same issue with the thumb throttle. I got full sweep out of it by taking a Dremel with a carbide grinding bit to the inside of the thumb throttle body. There's casting that you can grind away on the inside.

[@JessieThomas-r3w]

I love all your video you are very informational and you gave me and a couple of my buddy some good ideals, also, Would you still use the lash cap on the exhaust side for the automotive style springs

[@irepairofpc31familykartrac51]

I’d like to see the difference in the oem dish piston and the 24 dollar flat top on eBay.

[@elalex1487]

Great videos! What's the model number of the arc flywheel?

[@Black66]

Thanks! i put the link for the flywheel in the video description

[@shotbyzaystudio]

perfect video at the right time

[@drugstops]

big fan, love all the videos just curious how come you didn’t go with the proracersquip bulletproof kit off ebay that has everything included instead of buying all separately? do you have plans on trying them out or are you just not a fan of them? been wanting to try the kit out but i don’t trust nothing unless you reviewed it or built an engine with lol❤

[@Black66]

Here is a proracersquip kit video kzbin.info/www/bejne/gaipY2SKl8pnjNE

[@drugstops]

@ ohh man i been slacking works been getting the best of me i haven’t been able to watch the recent vids just been sifting thru the old ones while im doing this 224 build🤙🏾 hell yeah thanks lots

[@marquislewis1767]

I have built a few engines by watching your vids! The information you provide is gold! I have a ghost with a broken rod. I would like to go to Harbor freight today and grab a 224. Would I be able to swap the 224 plastic cam gear for the metal cam gear out of the ghost? And could I use the rev limiting ignition coil from the ghost on the 224? Just so I can temporarily remove the governor from the 224 until i can order the superman kit.

[@Black66]

Thanks! If you use the Ghost coil you also have to use the Ghost flywheel because its clocked different than a 224 flywheel. Both engines have .550 cam mains so it will fit. Check out the cam fitment video kzbin.info/www/bejne/bILCn5p5mNCUgKs

[@davidholcomb9961]

I'd rather go with the 224 for the torque. There's no replacement for displacement. I guess the Wildcat 223 is the hot ticket because of the beefy block and the longest stroke in the class.

[@PnVG22]

Would you still use the lash cap on the exhaust side with the automotive style rockers ?? SOS

[@mazb2500]

Hello, I have the same combination. The only difference is that I have a billet piston and the intake and exhaust block cover is ported with a Nibbi carburetor. The rear toothing is 40. The maximum speed is 60 miles with a BTX 200, exactly the same motorcycle.

I run a 212 'Stagev3+' (big valve, 275 cam etc) with a Keihin 26PWK and even that is too much carb so a 28 defitely is. Gas velocity = throttle response, a big choke is all top end.

[@mikem1557]

You do a great job on your videos.. Very informative!

[@Black66]

Thanks!

[@judahhuber6463]

What did you get for a pwk carb?

[@Black66]

I show the carb in this video kzbin.info/www/bejne/aYexh354pbOKerc

[@Stars4yu-ru5vr]

so instead of taking all of the governor stuff off. can i just take off the gear on the crankshaft?

[@bangnfaces9776]

@Black66 Im about to buy this kit for my 224 but I was wondering what length did you cut the push rods to?

[@zachlowe952]

Did you ever figure out the answer?

[@bangnfaces9776]

@zachlowe952 not yet

[@zachlowe952]

@@bangnfaces9776 I just ordered the kit last night, so we will see.. I have a feeling they are they same length as the stock ones, doesn’t look like he trims them in the video.

[@bangnfaces9776]

@zachlowe952 heck yeah that's cool. I feel like they are stock length as well but in the description it says they're longer. So once you find out, please let me know. I'd very much appreciated it!

[@edgualdino628]

Let me know what you think about that tank is it a good price or to high thanks for the help

[@airamiscovarrubias2593]

Hey black66 I’m trying to replicate your build on my 224 Coleman b200r do you mind sharing what kit you got from diy performance can’t find kit exact kit

[@Black66]

I Linked the REV kit in the description of the video . Thanks

[@Gloucester_minibiking]

How do you get your throttle to spring back on the 224 because I can’t figure out how to do it on mine

[@SpACeCruizeR2o3]

If i got a ghost could i use the flywheel off my ducar so i can build my ducar up an use the ghost in the meantime or should i just get the duro440cc

[@MinibikeAbe-89]

Awesome build 👍

[@smokeyi477]

Is this the new upgraded one ?

[@aaleexsaalaazaar]

New upgraded one?

[@bl_jacobs]

@@aaleexsaalaazaarthey came out with a hemi one now that’s why they had to take the 224 off the harbor freight website for a bit

[@FreeFallen32]

What header pipe are you using here? I’m trying to find a pipe to fit my ghost in my BT200x. Thank you.

[@-_-OB1]

What's the purpose of going to 5+ clicks on the torque wrench? Just habit?

[@samaxeman123]

superman 265 is a great cam, i get 8000rpm out of it with 22 pound valve springs and a 24mm flatslide

[@alexytgaming4543]

For real did you install those parts on the 224 or 212?

[@Deucealive75]

@@alexytgaming4543 You can use this cam on any OHV small block except the non hemi Predator. I have one in one of my 196's.

[@samaxeman123]

@@alexytgaming4543 212 non hemi

[@firepitfitness174]

Do you sell any of these engines?

[@dwaynebowman2175]

Would you be able to tune my 196cc

[@MFU.team.4367]

He’s has put out so many helpful videos, I’m sure if you really tried and paid close attention you can do it yourself. I don’t think he’s missed anything when it comes to these engines

[@markmorris2336]

The 224 on sale for 129.99 now

[@Black66]

Good deal

[@alejandromejia4996]

The ghost was on sale for 280 😮

[@Black66]

The Ghost is OK as long as you keep the REV limiter . Anything past that needs a billet flywheel and rod to be safe in the long term.

[@alejandromejia4996]

@Black66 the ghost aka Ducar racing 🏁 🏎

[@Black66]

@@alejandromejia4996 Check out the Ghost playlist for many combos with the Ghost

[@NONAME-kw3pu]

superman 265 is a great cam

[@Black66]

Yes, have that cam in a few bikes on the channel

[@kgol4686]

You really can't compare that to the ghost in speed wise because the ghost doesn't have a 265 can in or aluminum push rods and 26 lb springs the ghost a Only 22springs and a mild mild lift on that ghost cam but cost this for 224 is to me a way better deal

[@mktwatcher]

Just wasting fuel with jet in that 28mm carb. Try smaller jet in 28 for better fuel air mix.

[@Black66]

Check out the playlist on the channel for many jetting and carb videos. Thanks for watching. kzbin.info/www/bejne/emavaX-qqMaBlck

[@BT2SS]

Love your videos, but a torque wrench gets ONE click!!!

[@Black66]

I like doing multiple clicks to get folks to comment on the videos! Thanks for commenting! Oh by the way after 400 + plus videos on the channel We haven't had one engine failure! We can thank the mini bike expert for that! He shows up from time to time on the channel. Also check out the other world-ending videos on the channel that we were absolutly not supposed to do, no Exhaust video, three foot intake video, and one of my favorites the 7- foot exhaust video! Thanks for watching!

[@donkler5476]

First comment woohoo

[@02ws64]

Just picked up a predator 224 for my trailmaster mb200 and went to go install my 22lb springs and was shocked to find it has a hemi head from the factory....this is a newer motor I picked up after hf had been out of stock for a while. Here is a link to my video showing the head kzbin.infoEPpvOoJXFpk?feature=shared

[@Deucealive75]

I'm wondering if guys know they can get a Ducar 224 from DynoCams? This is the one to get if you want to build. No governor or flywheel. Non hemi head. And I'm hearing better quality than the Predator 224.

[@SpACeCruizeR2o3]

My bike hit 50 in a shorter distance then you and my rear brake was rubbing 🙃 imagine if i do the upgrades 60tooth rear 14t max torque 💪🏼💯💨💨💨💨

[@defauluse5524]

14:41 we are not F ing around anymore.