I Put The Biggest Injectors I Could Buy In My 6.0L Powerstroke

[@Captain_Edward43]

“So unbelievably fast dude” literally just blipping the throttle going nowhere😭

[@littlebambino5145]

Hy let me show him what to do with it 😂

[@chrismayer8337]

Motorcraft technician for over 30 years,nice truck nice video. Both right both wrong. Nobody knows what goes on behind camera true. We have upgraded standpipes and dummy plugs for this platform so yes while you are in there very good preventative maintenance. As far as nipple o-rings if they feel tight when you rock them DO NOT REPLACE! If they are sloppy and loose yes you must acquire special tool and replace with genuine Motorcraft seals and procedures.I have usually only seen this type of failure in manifolds that have had this done incorrectly.Keep the videos coming, love the 6.0 platform! Worked on hundreds of all platforms prefer this one over them all even scorpion engines or 7.3.👍😁

[@of-Israel]

Lol you love em before or after dumping your life savings into it

[@Hood.Housekeeping]

You love them stock? You love them because they break and you’re a mechanic? Or you love them after dumping a ton of money? Honest question. Looking to get a 7.3 or newer 6.0

[@ronaldbailey7365]

I just put injectors o rings icp ipr in my 6.0 dump truck hopefully it runs great also stand pipes and dummy plugs fingers crossed

[@ronaldbailey7365]

All motorcraft

[@tristanpenny6275]

Dang this is the videos that’s going to blow you up been watching for a long time and this video has crazy views already

[@chaseanonymous9327]

Dude that was rad! Tons of power. Those injectors work good. You got a nice truck there, I love seeing what you do to it on this channel

[@powerstrokecentral]

thanks brotha

[@Justin-bz1dp]

​hi

[@jshoe70]

Plot twist he was at full throttle the entire time. He was just trying to upsell the injectors and the turbo.

[@justnsaliga8518]

Definitely not 😂

[@WineHouse33]

Full throttle is the only test. 1/8, 3/5, or 9/16 throttle is useless measure...lol

[@brandoncotton8550]

Just purchased a 6.0 great content!

[@LumenChaser]

Hell yes dude I’m invested in this series I can’t wait for the next vid!!

[@asantana5400]

Awesome video brotha really great channel you got goin on looking forward to seeing a video on the before and after 🤘🏼

[@KCTURBOS]

Full Send next time! Send it! Send it! Send it!

[@faron0001]

what part of the electronics did you disable when you tuned the truck? It doesn"t have the same key one sound when you are tuning the truck verse the sound the key on makes when you try to start the truck. Where does the ticking sound come from when you start the truck. Thank you, from a guy trying to tune his 6.0!!!!

[@hydrodude2948]

Can’t wait for the next video. Keep the grind going you will have a big channel eventually. I like your work ethic and just going for it.

[@powerstrokecentral]

thanks brotha i appreciate that big time!

[@walkerwhite5580]

Hell yeah! This why your my favorite truck Channel

[@powerstrokecentral]

thanks brotha

[@lianleonard6357]

Going for that same setup on my 6.0 cant wait. Good video bro #strokin

[@lazarohernandez3218]

Sick video! Glad to be apart of it!

[@powerstrokecentral]

yessir thanks for stopping by the shop

[@Everythingtacticalnerd]

Would enjoy a video of spray painting the frame a nice black and cosmetics!, love your vids dude

[@scottp1111]

And just like that, the engine has been diagnosed with a terminal prognosis 😂

[@LAUGHLOUNGE-sn9nn]

Sick did you use your factory fuel pump with those

[@MikeLJ-ku7ov]

Best thing about a power stroke is you can count on second or third place consistently

[@Jordan-ut8wx]

Little trick of the trade, let that fuel pump run a few cycles before trying to fire gets all that fuel to the injectors it’ll roll over easier and you don’t need to crank and crank to get fuel up to the things

[@Jordan-ut8wx]

Also forgot that these things run off oil rail pressure so if not bled they have a piss of a chance rolling over the first crank

[@justinlammers8953]

Facts

[@trev-DaWg87]

he had a lon crank because after swaping injectors theres allot of air in the system... ive seen it take 3 days to bleed all the air out@@Jordan-ut8wx

[@willb7975]

Brings back memories replacing #7 injector in my prior 06 F350 6.0.... that initial crank sucked, priming the oul rail. Nice work and injectors.

[@Jordan-ut8wx]

Yep only stupid thing with them 6.0 Is the oil rail my buddy absolutely hates working on trucks that come in for that reason

[@TylertheViking93]

My truck made 30+ lbs with stick turbo and fuel, you should be making at least 40 and with those injectors you must be running stage 3 if it’s vgt, you should be seeing 50+ lbs boost on full fuel tube easy. Custom tunes go a long way lol

[@greenriverfarm2692]

Enjoy your videos dude. I’m owned by a 6.0.

[@alloutgamming3024]

Was kinda expecting the 6.0 to let go. But pleasantly surprised it didn’t.

[@chrisbouchard4518]

Next video “putting the newest head gaskets and head studs on my 6.0 power stroke”

[@jordancogdill3796]

definitely needs a bigger hpop and fuel system

[@100pyatt]

Lol not for tiny 205/100s

[@abeaustin2006]

@@100pyatt you can run pretty big injectors on the stock hpop but for injector health its best to get at least a lift pump for anything over 175s

[@powerstroke6.7]

As a previous 6.0 owner first thing I wanna say is: I’m sorry! 🤣🤣🤣 worst engine ever! It was bulletproofed and still had issue after issue. Sometimes small sometimes bigger.

[@rcwildman9255]

More power baby!

[@2003-2fitty]

Been waiting for this one!!!!!!!

[@2003-2fitty]

happy new year!🎉

[@fatherfirefighter7751]

Does that new tune account for the much bigger turbo?

[@powerstrokecentral]

Yes

[@95FordGuy-hw2le]

You’re head gasket will love those

[@corysnethen5645]

It needs a regulated return and a fass system now before those new injectors get starved

[@stevenbrooks1243]

Be blowing this up in no time lol

[@TreyMulder]

Are you planning on some track bars as well

[@powerstrokecentral]

yes

[@wannabeutuber1]

See y’all headgaskets later

[@caesarscott-barreto9811]

StOcK with a stage 3 turbo lol so basically you got the right injectors for the turbo lol

[@trev-DaWg87]

is that engine still staying together?? just curious because im not studded and i want to run 175/30s...

[@larrybroom5682]

I enjoy watching your channel. I'm curious. about what exhaust temps are you running with the new injectors and turbo?

[@ruthless6870]

Hey man with that big of an injector you should really get a fass/air dog system it would help a lot

[@100pyatt]

205/100s are tiny injectors

[@badass6.0powerstroke10]

​@@100pyattYeah, those are little baby injectors especially with that 100% Nozzle !

[@michaelmoser3482]

I’m a little confused. You said you lubed up the new injectors and THEN took the plastic coverings off? Is the whole injector covered in plastic or only a small part?

[@jonathenhill5734]

Ayyy you're in Bryan!! My home town lol

[@Anthony-f2e]

I installed 250 cc injectors on my 6.0 and it's great

[@badass6.0powerstroke10]

Hybrids ? And you still have Stock HPOP ?

[@ig243]

I just put 175/30 warren injectors in my 6.0 but now I need tunes. What’s better preloaded tunes or custom tunes?

[@powerstrokecentral]

Depends on what your goal is I would get custom tunes from gearhead

[@mattterkildsen7647]

Eric mcmichael get tunes from him

[@koryhaats3357]

cant wait to see the blown or locked up motor when it washes the cylinders

[@jordanbarker5734]

Ight so I’m trying to learn. Do bigger injectors make the truck harder to start?

[@2003-2fitty]

No that’s just the first couple of starts because air gets in the system

[@jordanbarker5734]

@@2003-2fitty ohh ok thank you

[@Prowboii]

@@2003-2fittyweird. Replaced my injectors 2 times now and never started hard after first start up. Something is not right with his set up. It’s probably just tuning. But still not right

[@2003-2fitty]

@@Prowboii were they stock size replacements? If so it probably didn’t start hard

[@Prowboii]

@@2003-2fitty 60 over

[@Boots67]

Bro you need an EGT sensor and gauge. Plus you have to get a lift pump to supply those huge injectors. Preferably a stage 2 turbo also to maximize your AFR Change your oil frequently, all that unburnt fuel will dilute the oil and make you eat a lifter

[@detroitdiesel7074]

you need a bigger fuel pump to actually get the full potentional out of those injectors. Also stupid test, the blown headgaskets come from prolonged use at higher cylinder pressures.

[@ultimateLOLman]

Love it

[@stephendechaud9164]

Dope video

[@6.oh_mack]

Do you know if you need a custom tune for 155/30 injectors?

[@powerstrokecentral]

Yes

[@6.oh_mack]

@@powerstrokecentralthank yoy

[@CharlieB310]

Making me wanna go out and buy injectors lol

[@powerstrokecentral]

you should

[@xe-chevy8556]

Is the transmission next? I’m ready to see that video!

[@alexskiles9284]

I really wonder what injectors are in my 6.4. I’ve got the SCT x4 tuner and I put out way more smoke than what your truck is doing, but at the same time you said you haven’t opened it up, if I build up boost and keep the truck from shifting out of 4th I can roll coal up to 75-80 mph and it’s just a thick cloud the whole time

[@brandonschaefer9743]

Completely different fuel system on the 6.4

[@alexskiles9284]

@@brandonschaefer9743 ah gotcha so I could just be on stock injectors?

[@williamshultz3598]

And what's the point of rolling smoke. You guys really don't understand stand diesels. Smoke means not enough air.

[@Powerstroke7.3]

Get some cosmetic mods I’m begging for u to paint match everything

[@powerstrokecentral]

bumper comes in tuesday

[@Hackarydachary]

Plans my friend plans, there’s a chance silver will be involved

[@leemckee1272]

Do the bigger injectors hurt fuel mileage?

[@clutchcouple9868]

Yes and no if you’re very easy on your truck, you won’t notice a difference. If you’re harder yes you most likely will.

[@BenKlassen1]

You gonna need an Odawg intake on that next? Rippin' truck!

[@rcwildman9255]

Odawg would be sweet

[@johnnybigmack1332]

Headgaskets have left the chat....💨

[@each1teachonetruth]

That stock fuel pump isn’t supporting nearly the amount of fuel needed to maximize the potential of those injectors. Not to mention you need a regulated return.

[@leemckee1272]

Please do an mpg test to see if larger injectors impact cruising mpg.

[@jamesbarber8308]

Probably affected it lol

[@Hestonchandler]

Does the tuner come with the injectors or did u buy the tuner

[@PrezydentpolakowEU]

Taki samochód to marzenie jestem z Europy u nas to by zabrali to i do więzienia wsadzili za ten czarny dym 😂piękne auto zazdroszczę i pozdrawiam sorry że nie po angielsku ✌️💪

[@kaijuandmore6629]

My dads ram 3500 2018 hit 32 psi stock turbo and stock engine

[@98fishingfool]

You need to take your truck to a better shop, standpipes and dummy plugs didn’t get replaced, didn’t reseal the nipples on the oil rail 🤦🏻‍♂️ factory map sensor maxes out at 28psi, you need a 6.4 100psi sensor and ebp sensor

[@powerstrokecentral]

I asked them not to replace them i was trying to keep my cost down on the video and there was really no big reason in me replacing them since i do not daily drive this truck. They do great work if you want to watch what they do go watch there youtube channel you cannot judge this automotive shop off of my content. there is also a lot of stuff off camera that goes on like replacing orings, connectors and stuff that i don't feel nesscesary to show in the video because it will bore the viewer.

[@91B-Evans]

Never ever replace nipple o rings on oil rails it’s people like you that give these trucks a bad wrap and how do you know what’s going on in the back ground and what’s edited out of the videos

[@mr.s7059]

​@@91B-Evansthat's one of the worst pieces of advise I've ever heard

[@91B-Evans]

@@mr.s7059 replacing the nipple o rings in the rails?

[@marqueskates5873]

​@@mr.s7059no he is 100% don't mess with the nipples. Better off getting a set of oil rails. When u mess with the nipples they always leak after.

[@waltzway5690]

PSA Don’t shut your shit off when getting fuel!

[@derrall7870]

U should record a boasted launch or a hard roll

[@belllpatrick]

You brought it to them cause they are pros 😂😆😆

[@msteiny1966]

6.uh-oh, just wait till everything ends up in the pan.

[@WineHouse33]

11:34 do it, or stop the cap...lol

[@dhooter]

Definitely has the typical wet beer fart 6.0 sound. Every 16 year old in Tennessee who's parents were loaded had one. Couldn't swing a dead cat without hitting one

[@RWB930]

KC turbo?

[@cameronhackl-frank9053]

Would’ve been cooler if you actually used big injectors

[@2003-2fitty]

You okay man? Haven’t seen any videos in a while

[@powerstrokecentral]

been on vacation brotha got a banger going out tomorrow evening.

[@2003-2fitty]

@@powerstrokecentralight!

[@spicycaribou2178]

S400 Turbo next

[@oneman723]

You need stem pipes no resell kits that long hot crank is gunna get worse

[@shanesimmons6079]

Yo bro do a mini max give away I'd die for that relic those are nostalgic

[@powerstrokecentral]

i might brotha

[@shanesimmons6079]

@powerstrokecentral love the channel currently trying to setup my 06 lariat f250 6.0 for work I'm a pool and spa contractor trying to get my own setup , you have any reccomendation for flatbed my beds reached,( I'm up here in Toronto area )

[@chevyguy5637]

Not very smart without an egt and fuel pressure gauge. Injectors will be toast soon if you don’t put a lift pump on.

[@Jmeinema1]

Claims in the first 45 seconds of the video that its a stock truck.... then reveals the stage 3 turbo....hmmmm when did those come stock?

[@clutchcouple9868]

A stock turbo on that truck can make up to 32 pounds of boost so I’m wondering what your stage three actually makes the previous video said that it makes 35 pounds I believe which seems very underrated

[@powerstrokecentral]

I bet I can get it to 40

[@smallengines1018]

​@@powerstrokecentral 40 psi of boost is asking God to blow the headgaskets at that point 😂

[@jeffreyvandenbiggelaar1399]

​@@smallengines1018 boost doesn't blow head gaskets. High cylinder and/or drive pressure is what blows head gaskets 🤦‍♂️

[@smallengines1018]

@@jeffreyvandenbiggelaar1399 pushing all that boost and then flooring it is gonna blow a head gasket bud

[@frankfitz3421]

So if you have a bigger turbo then its not a stock engine

[@hdbclone116]

he says a lot of “we” for someone doing all the work

[@BozoThaTroll]

Itll just be smokey. If your turbo aint enough to flow the air to burn all the fuel youll soot out. Use some nitrous or propane and max that turbo out. Every else will suffer/brake but itll make for a video or 2

[@fromtennessee9587]

Dude didn’t even get custom tunes that’s fucking wild

[@powerstrokecentral]

I did lol

[@fromtennessee9587]

@@powerstrokecentral looked like you was running canned tunes that came on the sct x4

[@powerstrokecentral]

@@fromtennessee9587 no I had gearhead tune it

[@fromtennessee9587]

@@powerstrokecentral ahh ok did good then I have heard good things about there tunes. How come you never got in it?

[@ShortLifeProductions]

I can dig it but please put your seatbelts on dude. Seen too many fellow gearheads get seriously injured or killed from not wearing them. With power comes responsibility!

[@100pyatt]

Should've went big with 300/200s

[@RichBoyLiving]

Buy my truck it has low miles super clean!

[@powerstrokecentral]

What truck and price?

[@RichBoyLiving]

@@powerstrokecentral 6.0 power stroke $20,000

[@RichBoyLiving]

@@powerstrokecentral I can text you photos

[@powerstrokecentral]

@@RichBoyLiving dm me on insta @powerstroke.central

[@RichBoyLiving]

@@powerstrokecentral what’s your number?

[@unlisted8218]

I got 250cc/100cc fuel injectors on my 6.0 powerstroke

[@TruckinBeagle]

Should have bought a Cummins.

[@SpencerB02]

You remake your fuel mileage video kind of wanna see what your mileage will be now with reasonable driving

[@reaper0662]

I haven’t watched it all I heard was stock so I assume your fuel pump is gonna be screaming

[@John-qp4cb]

How much loose trash did you have in your bed 😂😂 shit blew everywhere

[@totalmuscle10]

“Basically stock” am I the only one looking, upgraded turbo, exhaust, intake, tune….. man it’s stock is becoming a really loose term. Truck sounds great though.

[@dakotathompson8062]

i know nothing about 6.0s starter pack.

[@cs-gj3yf]

shoulda put 430/180's in it come on

[@LawChat101]

❤

[@JaydenLatimer-r4l]

Probably gonna blow the trans as well as head gaskets

[@e46330iT]

Still slow af😂

[@Chad.Heinrich.]

Biggest injectors you could buy huh?

[@powerstrokecentral]

For a stock HPOP yes

[@100pyatt]

205/100s are puny injectors lol

[@Swedishchef11]

*Rowdy* "Crazy" "she rips" "I'm so scared" Don't use seat belt. Cab fill of loose stuff

[@Farmsim22507]

Get some new head lights