I Raptor Lined My ENTIRE Truck Olive Green (2006 Ford F150)

[@AndrewDoesLife]

Raptor Liner Kit -- amzn.to/3l7HXIs Olive Green Tint -- amzn.to/3CPWwXf

[@JamesSmith-gz8xl]

Quick question. I've been searching trying to figure out how much I need to buy to do my truck. I have a 2003 f250 crew cab. Do you have any idea how much I need to buy, or if not a resource I can use to get the right amount?

[@HendricksPlumbing6519]

I used 3 gallons on my 2004 duramax crew cab.

[@MFRiley]

The 11th Gen F150 is in my opinion the best looking truck ever. It still looks modern, yet it actually looks like a TRUCK. New trucks just have way too much going on, and don't get me wrong - they look nice. But the 11th gen is a truck I could drive daily, and actually use as a truck. They look so damn good, especially when you mod them like this, looks great man.

[@AndrewDoesLife]

I think the 11th gen F150's will always be my favorite model of truck too. Lots of good memories with them and they look awesome. If I could get one with an updated interior of the newer ones I'd probably never switch haha

[@MrSpaceace1999]

Calm down man, NOT that great

[@EMERALDJAYNE]

I have watched this so many times!!😁 I cannot wait to do my truck this fall when it cools off... I'm old so it's going to take me a lot longer😂😂 thank you for the idea this is something I can do but I'm going to roll mine because I don't have a sprayer! 👍😁 I'll tell you how it turns out thank you for showing me how!!❤️

[@don4941]

Bro that’s commitment! U went all in no cap. Scuffed up the factory paint to complete this. HIGHLY IMPRESSED and turned out great!!!!

[@AndrewDoesLife]

Thanks Brandon!

[@Angel_V-915]

You convinced me to raptor line my truck in drab olive green. The black on the fender flares and bumpers really bring it together.

[@AndrewDoesLife]

Agree glad to hear it man! If you haven’t already picked up your raptor liner kit, here’s the link! www.amazon.com/dp/B01CKE7M7M/ref=cm_sw_r_as_gl_api_gl_i_H3EXADSXFX2RGMQ3JX9R?linkCode=ml2&tag=aslunsford05-20

[@jmoto1983]

We did this to a buddy’s truck and it worked unbelievably well. If you any rust damage, get it corrected before hand because it will show up eventually through the liner. But it looks really good in person.

[@AndrewDoesLife]

Thanks! Luckily this is a true FL truck and doesn't have any rust issues or whatnot so there was no correction to be done beforehand, the product is so easy to use and the end result is better than I had hoped for!

[@ToughCowboy]

Do you recall what pressure you sprayed fenders at? How long did you wait between coats? If doing again, what pressure would you spray the fenders versus body at? Thanks!!

[@AndrewDoesLife]

Hey man! Sorry for the late response lol…. We sprayed this at around 70-80 psi 😎 here’s the tint ale kit we used www.amazon.com/dp/B01CKE7M7M/ref=cm_sw_r_as_gl_api_gl_i_H3EXADSXFX2RGMQ3JX9R?linkCode=ml2&tag=aslunsford05-20

[@nickcox8958]

Holy hell that turned out even better than I expected that thing looks nice.

[@AndrewDoesLife]

Thanks Nick!

[@soulofnature6537]

Nice, now the only thing I would like to know before I do it, how well and for how long how many years this toughest car paint will hold thru winters-offroad-rocks-hail dmg and more.

[@mrnobody5381]

@@soulofnature6537 I was wondering g if the dirt stains it. I have seen that cleaning the bed liner in my truck the dirt often leaves behind a residue. It never really looks clean.

[@lavertb74]

I just wanted to say that I do not like how it came out because I absolutely LOVE THE FINAL RESULTS!! You did an awesome job 🥳 The results are amazing. 😎👍

[@AndrewDoesLife]

Thank you so much!! 🙏🏻

[@TeamTopKick]

Looks good. Found your video looking for OD green and black painted trucks. Thinking of painting my truck this scheme and in the process of having military stencil lettering made right now.

[@AndrewDoesLife]

Love it! Yeah there’s really a lot of things you can do when you take this route of painting your ride. This kit is definitely the way to go www.amazon.com/dp/B01CKE7M7M/ref=cm_sw_r_as_gl_api_gl_i_H3EXADSXFX2RGMQ3JX9R?linkCode=ml2&tag=aslunsford05-20

[@chrisao1987]

The problem that worries me about tinting the paint is it fading over time. Even big name bed liner companies have issues with fading when the bed liner is tinted. I'd like to see it in 5 years.

[@dd4147]

I have had the tintable on my xj which is parked outside in all of the new england seasons for about 4.5 years and it still looks like the day i did it. even the inside of the tub has held up great with the exception of one area i knew would flake eventualy on the floor because i couldnt prep ot properly but even that took a few years to lift

[@codypendency9482]

Not sure what brand my boss used on his cummins but it hasnt faded after 8 plus years it is however hard to tell with sliver fading probably haha

[@renemartinez3816]

Nice truck! Exactly what I've been planning on doing with my truck! As a United States Military Supporter! I'm ready to make my truck look like this one! Great job!

[@olysoasis6045]

One of the best transformations I’ve ever seen 👌

[@AndrewDoesLife]

Thank you very much! :)

[@beltfed4624]

To be honest, it's not my kind of thing. However, it turned out great, and your hard work payed off. When you was killing that factory paint job with the sander, my heart was sinking. That's being committed to a project! Excellent job! 👍

[@AndrewDoesLife]

Haha I understand its not for everybody. Not going to lie it took me a good while to muster up the courage to start sanding the body down haha the paint was in decent shape for the truck being as old as it was

[@rcsix3rd]

That's awesome, pretty damn unique also💪🏻👍🏻 Put the fender badges back to black. I think it would be good.

[@Skysmeller1]

rcsix3rd I do agree I would plasti dip the fender badges to have a nice black accent that matches the rest of the black on the truck. Especially to match the front.

[@AndrewDoesLife]

The fender flares may go back to black, good thing about raptor liner is you can scuff it up and spray paint right over it. Still kicking around the idea of going black badges again

[@CountryBoyMoto]

Is the final shot of the truck with the 35 inch tires? If so can you make a segment of one of your videos with the trimming you had to do and the specs on wheels and tires?

[@kyleoutdoors7914]

How has it been holding up for these past 8 months

[@livingleffertinthepnw7135]

Curious to how it's holding up? I did my running boards and want to do my bumpers, but I've noticed chips on the running boards already. They were Chrome, I sand tehm down with 80 and used etching primer before the raptor liner. Have you had much chipping? Looks bad ass, by the way.

[@AndrewDoesLife]

Hey Kevin, painting over chrome can be real tricky. Running boards definitely take a lot more of a beating from all the foot traffic so the accelerated wear isn't too surprising, although I still don't think it should be actually chipping off. As for painting over chrome, I did the same process, I sanded the crap out of my bumpers, then applied a self etching primer over it and then applied the raptor liner. Almost a year later and I never saw any chips or flakiness on the chrome bumper. I'm not sure why yours was flaking but it sounds like you did it correctly.

[@danniscabeza4838]

It came out awesome, completely changed the look on the truck. Thanks for all the details 👌🏽

[@AndrewDoesLife]

Thanks Dannis! I am SO happy with the way it turned out

[@zensationsmassage4154]

THAT......LOOKS....INCREDIBLE !!!!!! Btw, I watched the grill replacement vid for my 04 F150 and it helped a lot to replace mine by myself. I'm going to paint my truck now.

[@AndrewDoesLife]

Thank you so much!! If you’re going to use the raptor liner kit, here’s the link for it! www.amazon.com/dp/B01CKE7M7M/ref=cm_sw_r_as_gl_api_gl_i_H3EXADSXFX2RGMQ3JX9R?linkCode=ml2&tag=aslunsford05-20 I appreciate your support 😊

[@efftingcristiano]

Hey Andrew, this video is awesome! I'm watching you from Brazil! This color is fantastic!

[@AndrewDoesLife]

Cristiano Effting hello from the USA! Thank you for the kind words 😎

[@rosshutchings1]

Looks awesome! I agree with other comments to put fender badges back to black. Also wondering if you’re still thinking about doing the truck cap or topper as you called it. If so I’d suggest that be green with a splash of black. I see some around my area with a black stripe that really works well. Anyway I love your videos! I just did a interior LED swap on my 06 and took out my factory radio and replaced with a 7” touch screen w/Apple CarPlay. Next step is LED headlights and Raptor style grille if I can still get my hands on one. Keep the great ideas coming!!!

[@AndrewDoesLife]

Thanks Ross! Yes, I am still on Facebook Marketplace every day keeping an eye out for a topper haha I'd love to get one, raptor it green but then put some sort of black roof rack on top of it and do some truck camping videos out of it.

[@thetrain25]

Great work and well done with the video! Would you be able show how the door trims came out and if there was any overspray issues? I'm also very curious as to how the space between the bed and the cab turned out.

[@AndrewDoesLife]

Hey Brent, I'll certainly be doing some follow up videos on the process and how I plan to correct anything I didn't like with the finished product. As for the space between the bed and the cab, there was ample room to get the nozzle of the gun in there so I was still able to paint all of the visible blue paint.

[@mpstateguard6161]

Did you do your door jambs or did you leave them blue

[@Farmor4x4]

a question I want to ask you after painting your truck with Raptor Liner, the paint does not lose the shine that remains after painting it, that is, with the dust and dirty it does not remain opaque, and later when you wash it, the paint raptor texture?

[@fastgurrrl]

Looks awesome. I'm getting ready to do this to my 01 F150. 💥💥👊🏻

[@mikecastleberry9671]

But the man is a pus

[@Skysmeller1]

Dude... that’s so rad!! Great job that makes your truck look much more modern too. I’m sure this video will really help expand the channel. Nice work!

[@AndrewDoesLife]

Thanks Luis!

[@Skysmeller1]

I think this is your most watched video almost 300k views I remember when you posted it and it had maybe 1000 views at the time. Progress!

[@AndrewDoesLife]

It definitely is! It was doing okay for a little then I remember one night awhile back it got like 100k views overnight and my phone was ringing nonstop haha one video at a time!

[@randallreece3636]

dang, I love this truck....

[@AndrewDoesLife]

Thanks Randall!

[@JamesDguy]

Same color I did my lofted G35 #warhawk. Looks really good you did a awesome job!! Hope i had some thing to do with this color choice haha looks beautiful man 👏🏻

[@AndrewDoesLife]

Your video was a huge factor in me going with the color I did. I was nervous the OD green wasn't going to look the same when it was sprayed but after seeing your warhawk I knew this was the color for me

[@cky3457]

was exited to see the final result. that shade of green has always been one of my fav colors and it looks amazing on the f150 nice work bro!

[@AndrewDoesLife]

Thank you! I'm happy with the color, some of the greens I have seen are too close to pine or forrest green for my taste

[@mcandau]

Hey your truck looks awesome! I’m wanting to do the same thing to my ram 1500. It’s currently silver. Wanting to know if you did the inside of the doors and if so, how did you go about prepping that for paint? Thanks!

[@AndrewDoesLife]

I did not do the door jams. If I had, I would have used a soft sanding block to sand those difficult to reach areas and then used Tape n Drape to seal off the inside off the truck when I sprayed it down

[@ronin8188]

Thats exactly what i want in real life. Awesome truck man

[@AndrewDoesLife]

Thank you Ronin!

[@ARCVermontchapter]

I'm doing this to my 07 ram. How many kits did you end up using to do all the green on your truck.

[@kylenestrud5408]

What size compressor did you use and how did it hold up?

[@New-Breed-Drywall-And-Paint]

If I was to guess I would say a pancake or something with a similar cfm . Gotta use a continuous flow or you will get the results he did…. Where you have big globs then it gets fine and smaller from the pressure fluctuating. But I’d say 8 out of 10 people don’t even know what to look for and just look at the overall finish and either like it or hate it …..a continuous flow compressor would have changed the results dramatically. If you were to put another vehicle right next to it that was done with the right compressor you would instantly see what I’m talking about

[@bingnowtv]

Saw the process. My Dad painted all 3 cars in the driveway when I grew up. It was cool. Surprisingly great look here. wow!!

[@AndrewDoesLife]

Thanks Douglas! What a cool thing to be able to see growing up, I learned a ton from watching my dad work!

[@bingnowtv]

@@AndrewDoesLife Yes. So true & treasured memories and all those lessons & tidbits that'll stick with us. I got Dads '69 F250 now and it's gonna be good. It's vamp time... you know :-) thanks dude

[@benm7045]

Holy Crap!! When i first read the title I thought it said Olive Drag Queen. 😂

[@AndrewDoesLife]

😂😂

[@Jay821]

How many pouches did you use in the whole car for olive green!? Still need to buy the liner kit right?and add the olive green pouch and hardener?

[@TheGamingNation44]

Insane. Makes me wanna do mine 😂

[@AndrewDoesLife]

You should do it!

[@cispi9319]

Same lol

[@BigManAlaska]

Just need to get you up to Alaska and do mine now.👍👍 I'll pick you up at the airport.

[@CruzesLouisianaOutdoors]

Awesome! Dude...send me your email and I’ll send ya some pics of my 6.2 raptor wrapped in same OD green :-)

[@MigityMigityMike]

Bro, I ain’t gonna lie...I was sorta scared for you but that turned out SHWEEEET!!! You did a really good job!!!

[@AndrewDoesLife]

Lol you and me BOTH my friend. Overall I'm very happy with the way it turned out

[@MigityMigityMike]

I’m honestly considering spraying my camper roof with it now. I bet it would take care of any leaks that may start. My camper is about twelve years old so I’m expecting leaks any time now

[@AndrewDoesLife]

MigityMigityMike could be some good, inexpensive preventive maintenance!

[@chargerfan1875]

Too mich talking

[@jonadams8305]

Would the raptor liner prohibit rust? Putting this heavy paint on it has to keep the metal body safer from things like rocks chipping paint and rust forming. But would it trap moisture? Truck looks great!

[@AndrewDoesLife]

Raptor Liner would not trap moisture between itself and the metal body of the truck if that's what you are afraid of. As far as prohibiting rust goes, it would serve the same purpose as a coat of paint in that the bare metal would not be exposed. Hopefully that helps!

[@coleharbin7879]

This turned out great I’ve gotten my kit I jusy have to do it. How bad do the door jams and under the hood look? I’m debating doing a od green base coat before the bedliner so the jams will match

[@AndrewDoesLife]

Thanks Cole! Honestly I never even noticed them. You only ever really see flashes of the different colors when you open and close your door so it doesn't bother me much

[@michaelnudelman8591]

Looks good, my 95 Ford bronco is “ Rhino lined” inside and out , and I love it. Here in Lubbock we get hail in the spring and now I don’t have to worry about it at all , just bounces right off .

[@AndrewDoesLife]

That's awesome! Nothing like a nice bullet proofed ride haha I loved taking mine thru the trails and not worrying about branches scraping up against me

[@dominicdinuzzo9945]

I saw this video 4 years ago and the truck came out great. I came back today to see if your bumpers were chrome and if so, did the raptor paint hold up over them? Awesome truck 🤙🏼

[@Kim-tn6hy]

I have a white f 150 2005 and this is the paint job I want I love what you did! Iove that green! I really like the fact there is zero shine tuff paint job for a tuff truck.

[@AndrewDoesLife]

Thank you Kim! Good luck with your project 😊

[@reecegilbert]

BROOOO THIS IS SO CLEAN!!! I agree get those badges back black! But MAN THIS IS DOPE! I love it!

[@AndrewDoesLife]

They probably will go back to black. Right now I'm just enjoying how amazing it looks as a whole lol

[@skwid98173482]

Looks nice !!! I did my 2007 f150 lariat one all black! Where did you find the grill with Ford written in it? I can’t find it anywhere

[@AndrewDoesLife]

Thank you very much Steven! at the time of this comment they only have 5 left in stock, amzn.to/2LAbacT

[@D_Cali_Life]

What PSI did you use to spray ? I heard lower PSI leaves it thicker and more texture. And higher PSI smaller texture

[@AndrewDoesLife]

D_Cali_Life that is correct, higher PSI leaves a smaller, less chunky texture. I tried to keep it around I believe 70 psi thru the whole truck

[@michaelk2378]

Way to go, your truck ROCKS!!! I am researching possibilities if I take over my wife's tan-peach 2011 Sorento with 120k mi. I would want to put aggressive tires on it, upgrade the stereo, open up the exhaust, & I would definately want to Monster line it. My goal would be to get the soccer-mom out of it and turn it from a HERento into the SIRento. Best DIY Monsterliner job on YT!

[@AndrewDoesLife]

Thanks my man. It was actually a Raptor Liner job haha but I appreciate the kind words! I’d love to see that SIRento when you’re done with it!!!!

[@CrowCreekOutdoors]

What kind of fender flares do you have there? What did you do about the original color on the door jambs & under the hood?

[@AndrewDoesLife]

Hey dude, these are the fender flares I used. amzn.to/44i8Qh7 I left under the hood untouched because its covered by a heat shield tarp

[@CrowCreekOutdoors]

@@AndrewDoesLife Thanks.

[@cj-sp8ed]

Looks great, am about to order the paint for mine I've got a f150 supercrew and doing the inside of the bed and then all the outside, do you think 8 bottles would be enough. Thanks

[@AndrewDoesLife]

The entire bed and the whole exterior of the truck? You will definitely need more than an 8 bottle kit. I’d wager 12 minimum because the bed of the truck adds so much more coverage needed

[@cj-sp8ed]

@@AndrewDoesLife thanks I appreciate it

[@AndrewDoesLife]

No problem! A truck bed will easily eat up 4 bottles just to ensure total, quality coverage.

[@devastatn]

Gotta love OD Green. Best color on the planet. Reminded of my old tank(M60A3/M1A1) back in the day. Great job

[@AndrewDoesLife]

Thanks Jack! Once I saw this color I knew I had to do the truck in it

[@kevinmontgomery1383]

Thank You for your Service!

[@AndrewDoesLife]

Thank goodness for those who have served! 🙏🏻

[@07LUTE70]

So what was the total paint can total? The shultz gun fits on the cans? Total cost if you wouldn't mind I totally love the job. Do they have destroyer grey?

[@AndrewDoesLife]

Hey bud, heres the link to the kit I used. amzn.to/3JvdIYc I believe I used a total of 9-10 bottles on this truck. I think I bought 12 maybe but I didn't wind up using them all. This product goes a long way!

[@VicMKV]

What type of sander did you use to strip the paint and what grit? Do you have a link to the sander?

[@AndrewDoesLife]

I used this Dewalt Orbital Sander - amzn.to/38VUM3d

[@farmerchuck3]

After you sanded down the truck did you wipe it down with any chemical or just a towel?? How many quarts of raptor did it take to totally spray your truck?

[@JoseOrtega-xn4mj]

Thanks for your hard work, it looks great. Thanks for teaching me I will try to do mine soon. Any suggestions regrets or something you might have done differently? Again, good job & thanks!!

[@AndrewDoesLife]

If I could go back and do it again, I would use a larger air compressor because the one I had struggled at times to keep up. Other than that, this kit was exactly what I had envisioned in my mind! www.amazon.com/dp/B01CKE7M7M/ref=cm_sw_r_as_gl_api_gl_i_H3EXADSXFX2RGMQ3JX9R?linkCode=ml2&tag=aslunsford05-20

[@BKWalrus]

In the video you olive drab green, but the product link just goes to Olive Green. There are actually two different colors offered. Which one did you actually get? Looks great.

[@codywood3582]

I got a 05 f150 and I love this paint. Considering doing it but maybe a bit darker. Thanks for the inspiration tho

[@nanomike2069]

Looks great thinking about doing it to my dodge!!! What’s the mix one pouch to a can ? Truck looks awesome!!!!

[@AndrewDoesLife]

One pouch per one bottle of tintable raptor liner 👍🏻 thanks mike! I would highly recommend this product

[@rogeliosanchez4221]

Nice job, I have on 03 f150 that I want to do this to. What size compressor did you use? At first I thought it was a pancake compressor then I saw the bigger on. Nice job

[@AndrewDoesLife]

I used mainly a small, 6 gallon air compressor the whole time. I would highly suggest using a larger if possible

[@julienjaillet4670]

How many botles of raptor liner did you use to paint the truck without bumpers and flayers? i am about to do the same thing to my 2007 f150!!! Looks great🤘 keep it up!

[@AndrewDoesLife]

I believe it was 9-10 bottles of green

[@kevinmontgomery1383]

I bought a used car last week and saw a xb done like that on my way back. Now I have watched how to do it. Thanks!

[@AndrewDoesLife]

You’re welcome Kevin!

[@gregphillips1998]

Would a matte clear coat over that help preserve the color. My son did my old 1998 Dodge Ram before this was the thing to do. He did it in the Rino Lining in black but the color does fade.

[@AndrewDoesLife]

I don’t know much about rhino liner but I had a different color from a custom coat on my truck before I put the raptor liner on and that never faded and I have not read anything in the forums or online about raptor liner fading as well.

[@scotimotti]

I couldn't decide on a color...Olive drab. desert tan or Olive green...this video really helped me decide. thanks for all the great info. Olive Green it is, on a 2001 Ford F250.

[@aaronreed5754]

Hello... what size air tank did you use to paint the truck? I have to get one so I wanna know what size to possibly get... thankx

[@AndrewDoesLife]

I used a tiny Bostich air compressor, maybe a 6 gallon and it was way too small. I would highly suggest using a larger one if possible

[@dharris9637]

You didn’t use primer after sanding with 180 grit sandpaper? It sticks still good if primer step Is skip?

[@AndrewDoesLife]

You only need primer if you sand down to bare metal. If you scuff the existing paint, you can spray the raptor liner over the top of it.

[@dharris9637]

@@AndrewDoesLife would you just recommend sanding 500-600 grit sandpaper So the Paints scuffed then Spray it with Bedliner? Or what grit do you recommend , Step by step

[@dharris9637]

@@AndrewDoesLife you think a gallon would be Enough for Dodge Charger 2012

[@petrsykora5925]

Hi, really nic. What is the colour? RAL? Do you have any link where buy? Thanks - Petr, Czech Republic

[@AndrewDoesLife]

Hi Petr, the color is Olive Drab Green and the link to buy the product is here -- amzn.to/2rdPMDz

[@gregz4249]

I like how it turned out, I would have had hard time doing it though, I liked your color scheme before, now will be much tougher

[@AndrewDoesLife]

Greg, it was really tough to decide on the color. I was between a dark grey or OD Green but I’m really happy with how it turned out. This kit is definitely the way to go www.amazon.com/dp/B01CKE7M7M/ref=cm_sw_r_as_gl_api_gl_i_H3EXADSXFX2RGMQ3JX9R?linkCode=ml2&tag=aslunsford05-20

[@IFHSP2]

How’s this holding up after the last couple years. Any fading or peeling? I’ve done the inside of my Jeep, just not sure how the Florida sun will treat it on the outside.

[@jamesfrantz6085]

Swap out your factory antennae with a black bullet one ,would look better. Do they make red raptor liner color? The truck turned out awesome.!great job dude

[@andreaernestoreani9599]

I just watched your video and i Like it. Now i need a technical suggestion from you. Is possibile to pinstripe on a bedliner paint? Tha oainter is finishing all my motorcycle in Army green Raptor and the surface is very rough and i don't know if i can. What do you think about? Thank You

[@AndrewDoesLife]

I would imagine the raptor liner kit ( amzn.to/3JvdIYc ) can have a pinstripe used on it. You can literally just use spray paint over the top of it if that's the look you're going for!

[@rodolfomendoza7161]

Friend of mine has his Ford F-150 painted the same color. He got the inspiration from the color of Master Chief's (Halo) armor. Have to say that it is a unique paint job that I have only seen to this day on his F-150 and the F-150 in this video.

[@AndrewDoesLife]

Haha well I was never much of a Halo kid but I definitely get the reference! It's an awesome color :)

[@danielaragon6058]

Looks really clean bro nice job😎😎

[@AndrewDoesLife]

Thank you Daniel!!

[@snacking5908]

Amazing job. I saw a wrangler done in a gray. Thought I’d like to do the same with my king ranch in black and gray. You made this seem so doable at home. I have a small compressor still in the box. How did you adjust the setting for each layer?

[@AndrewDoesLife]

It's 100% doable at home. I was working by myself 95% of the time, two of my siblings helped out with the taping and masking process. I went with the same psi for each layer. I tried to keep it at 75psi the whole time, but it was annoying because the air compressor was having a hard time keeping up.

[@snacking5908]

Andrew Does Life thanks

[@Scorpion-bp3ec]

Quick question does raptor lining your truck effect your paint overtime? (My car paint is in like new condition)

[@AndrewDoesLife]

I would never Raptor Line over a new condition paint job. I did this over mine because it was badly sun faded and the clear coat was cloudy in a lot of areas. If you Raptor Line over it, there is no going back

[@Scorpion-bp3ec]

@@AndrewDoesLife ok thanks

[@S.E.C-R]

I’m not a huge fan of the color, but I love the texture and how it turned out... Great job!!

[@AndrewDoesLife]

Thank you! Cheers!

[@S.E.C-R]

Andrew Does Life You’re welcome, I’m thinking about spraying the flares on my Jeep with this stuff

[@AndrewDoesLife]

I would highly recommend it. It looks awesome

[@camdensipma4756]

I love this green dude!!! Good work. Later on I want to do my whole truck this exact colour of raptor!

[@AndrewDoesLife]

You should! I'm super glad I went with this color combination

[@catfishassassination3821]

Truck looks bad ass brother and I really wanna do this to mine. Awesome.

[@AndrewDoesLife]

Catfish Assassination I’ll tell yeah man after doing it for myself, I wish I would’ve done it a long time ago haha good luck!

[@ExploreYourWorld-oo3jd]

Nice results! I don't really like how much texture there is when you get down say within 5 feet, however further than 10 feet away it looks fantastic! And it should never rust or corrode now! I'll give it a score of 9.5! (I think I may have left the rockers and bottoms of the doors black)

[@AndrewDoesLife]

Thanks for the kind words my friend! I love the way it turned out :)

[@johnwolf1475]

texture works like dimples in a golf ball- he should triple the gas mileage!

[@richardwilliams7875]

Came out Badass!! I like it a lot, now you can dress up as Master Chief or put FURY like the Tank. Came out great.

[@AndrewDoesLife]

Danggit man I totally should've been Master Chief for Halloween and pulled up in this haha

[@jn7154]

I also have an eleventh gen F150 and I was looking to do the exact same thing you did. How many liters of green did you use? And you didn't do the door jambs, correct?

[@AndrewDoesLife]

9-10 of green, 2 bottles of black and I did not do the door jambs

[@jn7154]

@@AndrewDoesLife thank you for the reply. Did you ever regret doing it?? I have some major rust under the rear fender flares so I want to weld in some patch panels and do some body work then line the whole truck

[@AndrewDoesLife]

@@jn7154 This might sound a little sappy, but I only regret not doing it sooner. I overthought this project for a year before finally pulled the trigger on it!

[@tb5674]

Wow, great color! The truck looks fantastic. Looks like Florida country in the background. What area are you from?.. Cheers from Fort Myers, keep the great videos coming!

[@AndrewDoesLife]

Good eye! Born and raised Fort Myers haha :)

[@kennethrosbury2819]

Looks awesome dude you should have put a stripper camouflage down on the bottom all the way around it looks great

[@AndrewDoesLife]

Thanks Kenneth!

[@JSTJPN]

Well that settles it for me. That is exactly the color i am looking for for my Jeep Wrangler. What psi did you shoot it at?

[@AndrewDoesLife]

I tried to keep it consistently around 75psi,. but I used a small air compressor so it was difficult.

[@CGrez33]

Love it! What PSI did you shoot the green in? Also what did you wipe it down with after sanding? Thinking of doing my truck soon!

[@AndrewDoesLife]

Thank you! Originally I wanted to spray around 80-90psi but because of my smaller air compressor I wound up having to spray around 55-60psi

[@Chris_Wolfgram]

Hey, that's my truck :) Always loved Super cabs. IMPO, Super crews have too much cab to bed ratio. If you want an SUV, just buy an SUV. LOVE this color :) Looks great !

[@AndrewDoesLife]

Right on Chris! Hope she is treating you as well as she did me :)

[@Chris_Wolfgram]

@@AndrewDoesLife Totally ☺ She's my baby. 08' with only 67K miles on her...... and a rediculous 3000wt stereo system, with lots of mids and highs, plus an 18" sub 😉

[@zacharymundell8508]

How did you get the front bumper off? I looked up a video and it said i need to pretty much remove everything on the front of the truck?

[@AndrewDoesLife]

LOL no it’s literally like 6 bolts you take off and then the bumpers just pulls right off

[@zacharymundell8508]

Do you know of a short video that shows how to do so?

[@AndrewDoesLife]

No I do not, sorry.

[@alexemick5423]

This is perfect this is the exact truck and color I was going to paint mine

[@AndrewDoesLife]

Heck yeah dude!!! Go out and do it! 👍🏻😎

[@shockjock35]

I have Tundra Crewmax,I want to Raptor line my Front and Rear Bumpers, Grill Surround,Hood Bulge and Step Rails. Can I spray them on the truck or do I need to take them off and leave off to Dry and if so for How long?

[@AndrewDoesLife]

I would recommend taking them off and spraying them with the product and then reinstalling the parts. As far as drying time goes, I have left products overnight and installed them the next morning. I would say a minimum of 12 hours if you can't give it a full day. If it's going to get wet, I think you have to give it a full 24 hours or else the color can run

[@shockjock35]

Andrew Does Life ok cool, I read some people were giving it a few days off the truck until they re-installed the part. I just didn’t feel comfortable running around town that long without my bumpers and Grill on the truck. in valley girl voice. “Like OMG what would the neighbors think” . Lol just kidding

[@AndrewDoesLife]

I feel ya, a full 24 hours to dry is perfectly fine in my own personal experience. I have used it a ton and I feel comfortable putting it back on after just a day of drying.

[@nelsonenaccion4x424]

Great JOB looks outstanding my freind i like military style i love it so can i have info about the product color how many cout did you aply THANKS great video

[@denverwood5290]

This turned out really nice. I think this is the best I have seen yet

[@AndrewDoesLife]

Thank you Denver!

[@sneakycobra5939]

I did my 94 k1500 in the rustoleum forest green looks beautiful, I'll be doing my brothers integra that color as well. I'll be uploading videos. I just ordered my 4inch cowl hood and 6 inch lift, also a few more things. It's nice but it scratches way to easily with the bushes and branches and looks ugly so it's not practical. I'll be doing a review on that rattle can job for us who loves k1500s but at the end of the day I'll be doing this paint job since it's way better after I'm done lifting it. I'll be Giving you the credits👍 Thanks man!

[@AndrewDoesLife]

Good luck on your future projects!

[@yotesnatchers2845]

Hey man I've been looking ALL OVER the place for this color in a kit and can't find it ANYWHERE. Where did you manage to find it? I can find it in rattle can but not in a kit.

[@AndrewDoesLife]

They still sell the color, but it’s only in individual packets by themselves. As far as I know, they no longer offer an 4 or 8 liter kit with this color included. You will have to buy a tintable kit and then buy these color packets as well

[@mysticdawn82]

Sorry if this is a repeat question, but I wasn't trying to go thru all the comments and see if you've already answered it... All in all how much did it cost you in supplies and everything to complete this? Where are you located, trying to get an idea on how the weather affects the liner. Have you noticed any major changes in performance and mpg?

[@jesusalberto9603]

Raptor liner viene de diferentes colores? O tienes que cambiar el color tu. Es decir agregar pintura a tu gusto? Es resistente a despegarse o queda como asfalto líquido una lija difícil de quitar?

[@eduardojaramillo8752]

Raptor liner viene en diferentes colores o lo puedes comprar para ponerle el color que tu quieras.Es muy resistente y no es muy facil de quitar.Tienes que preparar muy bien para que se adhiera bien.Mira bien este video en su preparacion.

[@Farmor4x4]

@@eduardojaramillo8752 pero lo que digo es que se le agrega al producto para diluir. Thinner, o gasolina?

[@eduardojaramillo8752]

@@Farmor4x4 Eso viene con todo lo que necesitas para pintar,hasta la pistola esta incluida en el kit.

[@eduardojaramillo8752]

Para diluir el reducer que te envian en el kit.

[@victornava8096]

where did you order that raptor kit? can you tell me all that your odered so i can do the same to my truck.

[@AndrewDoesLife]

I ordered it off of amazon. There should be a link to it in the description of this video, if it doesn’t work for some reason let me know and I’ll get you another link to the kit!

[@victornava8096]

Andrew Does Life thanks!

[@jamesscott387]

pretty cool you should do a video on how to install Rock lights they look awesome on my F-150 I have a 05 5 Ford Triton V8

[@kidelroy2462]

Question, 2 coats? How long did you wait between coats and did you have to sand the first coat before applying second. I'm new to this.

[@alangreyes1472]

Damn thats came out absolutely incredible!!! I have a f 150 2004 , ima try to fix it up little by little love these trucks!!!

[@AndrewDoesLife]

Thanks Alan!

[@deanvoss7098]

Approximately how many years does it last? Before it fades or chips or peels or has any issues

[@AndrewDoesLife]

Hi dean, check out this 10 year raptor liner review video kzbin.info/www/bejne/fYSwdpypn7xjndU