I super size my push-lawnmower

[@Amy-wh3dt]

Sometimes you just need MOWER power

[@thegenerousdegenerate9395]

Groannn... Lol

[@Amy-wh3dt]

4Bt Cummins

[@MrDavidelliottjr]

Yup

[@scootergeorge9576]

@@thegenerousdegenerate9395 - MOWn!

[@leecanty2894]

Corny but you still get a 😂

[@x47g22]

As long as the grass doesn't stand after you ran through it, it's a success! I love the feeling when everything just works! It's fun watching you brother! More projects.

[@boataxe4605]

Tim ‘The tool man’ Taylor would be proud.

[@Ron-im6mj]

Omg that's the first thing I thought of when I seen it...lol The tool man built it...lol

[@thegenerousdegenerate9395]

Needs a Binford label.

[@brianeastman3547]

Or Mythbusters.

[@rverro8478]

He probably add nitrous to it.

[@techlab-gi1uz]

And he could turbo charge up from here.

[@awolslaboratory1388]

Congratulations. You successfully made the most dangerous lawnmower possible. I like it. Kudos!

[@lawnmowerdude]

No he didn’t cut holes in the deck.

[@apa530]

Yep I would be afraid that chain could come flying loose and take half my skull with it, or go right through my chest ,or dislocate one of my arms or legs !

[@b166err]

"add fuel stabilizer or voids warranty" 5:55 👍

[@aliciaantoniadis9100]

Thank you so much! I have always dreamed about a mower that would go through close to everything but actual trees! Now, the music was really good, and it was very nice of you to let your lady in as a guest. And I agree with her, it does look scary. Thank you Oliver. Regards Alicia.

[@charlescheese7997]

The simplistic way you go about these Little Creations is great they all seem to work out and in some sort of fashion I enjoy watching them keep them coming

[@connorwaits6575]

The tomato bit was funny, almost like it was caught in a vacuum of sorts

[@hellohun7331]

If I were you, I'd move closer to the city. The hospital would be closer.

[@CheapGameModder]

Hööh... 🙄

[@adamoldham9542]

Remove the front expose the blade to make it more dangerous and effective

[@gearhead1234]

When That chain breaks you could lose a body part....

[@pereklund7112]

Eating ice cream and opening a door at the same time might be a tad to much for some people🤣🤣🤣

[@timwilkinson2797]

Sad - this is the upncoing ppl that " Can " control us !!!!!

[@mtcruse]

Some advice: 1) Cut the front lip of the deck off as well as the baffle - then your blade has a better chance of contacting the taller weeds (watch yer feet!) 2) A chain tensioner and a chain guard would be a really REALLY good idea, unless you'd like a #50 chain imprint on your melon. With that aside, this is very cool...

[@josephbarovich8733]

welding in shorts and no gloves, a man after my own heart

[@skydive7054]

the most badass pushmower ive ever seen or heard in my entire life.

[@jamesgreable3370]

3:53 "Oh my God, this project is so dumb". He said it... not me, lol. I love that you keep going with it till the end 👍👍👍

[@OliverMotorized]

haha thanks james

[@mrimbusyt]

Awesome as always 😁👍♥️

[@vancemacd6315]

I really wish I could stop by in person to admire your works of genius, you do great work! Please keep it up.

[@704406bbl]

Looks like something Ed Roth would've built. Way cool.

[@scootergeorge9576]

EJ Potter would have put either a V8 or a jet engine on it!

[@decadantdog4444]

Big Daddy Rat!

[@texasdoug5739]

Very clever....well done! You are talented!

[@OliverMotorized]

cheers doug

[@grandpaseed]

i dont know if this was supposed to be funny but that reveal made me laugh , i am glad he was pushing that beast and not me.

[@OliverMotorized]

I was super serious

[@AJRestoration]

What camera are you using?

[@OliverMotorized]

I use a lumix G7 and a gopro 7

[@RichardGottshall]

You rookie ,, Turn your blade over, your trying to cut with the flat side. Though it is so sweet. lol

[@willefixit]

should cut better u rite.crazy build!!any way ,

[@OliverMotorized]

thanks for the suggestion. So the blade only goes on one way, I'm thinking either the blade is shot, or the Briggs engine turns opposite of the original engine.

[@RichardGottshall]

@@OliverMotorized , I would say motor is running backwards.If blade only bolts on one way the the spin would be right for the deck. is there a way to change the pull on the jack

[@keithwittman4741]

I'm seeing the tomato only getting slapped around by the blade,that's why it hung in there so long. That's also why what I had to drop my first thoughts of it going backwards, or being upside down. Upside down or backwards rotation would have cut te tomatoe quickly.

[@keithwittman4741]

Filling in the hole where the wheel drive might help with the airflow of the deck.

[@brentbettis8663]

Nice build! 5 foot sticker bush calls for over kill. 👍

[@OliverMotorized]

heck yeah lol

[@cannonballrepair7940]

That is crazy! I like it!👍🏻👍🏻

[@shplayshiggty7537]

When you get baked and edit lol look how long this piece gets stuck great vid man

[@OliverMotorized]

hahah nahhh just thought it was cool!

[@marshmower]

The Porsche of push mowers. Offers excellent turn in prowess.

[@harrys.3165]

I never thought my 3.5 hp Briggs and Straton lawn mower was powerful enough.!!!!!!

[@nedlyest]

I learned the hard way to at a minimum use pliers to hold metal on a drill press. I had the tip of my finger lopped off down to the bone. I got lucky I didn't lose anything but meat.

[@rustyshackleford7470]

Nate Sargeant I didn't want to thumbs up you getting your finger chopped off. Seemed weird.

[@RockerGuy0001]

If you put a stop on the press it will prevent it from swinging

[@ryryboyle6126]

Thanks later I'll take the stop sign from my corner of the street when my neighbors are sleeping hope I don't cause a wreck but I can't keep hurting my fingers

[@colstace2560]

Use a vice, lucky you didn't lose a finger dumbass

[@MowersNBlowers]

Great video man! Love the slow mo tomato carnage!

[@OliverMotorized]

cheers buddy

[@meacenastiberius9438]

And you still have all your fingers? Freakin Awesome !

[@AnthonyCurreri]

The mantra of serious makers and engineers everywhere.... "it's good enough!" LOL

[@codelicious6590]

Dude I was laughing my and off when you started pushing it around. Hilarious.

[@Dan_Kornfeld]

If Mad Max needed a mower for his lawn, it would look exactly like that! (Although, his might have a ram air intake and maybe nitrous - maybe next time!) Cool upload. Keep doing what you do dude!

[@OliverMotorized]

lol spit some gas into the air intake

[@timothyfink9354]

still wish you lived on my street.keep on building stuff.

[@1coppertop]

Hilarious. Great video. I laughed often. including pull the door not push. Lol

[@dontworrywhatmynameis4111]

KZbin finally gave me a good recommendation for once lol..Definitely a cool build,and definitely gonna sub and check out more of your content

[@markmeyer7456]

Love the sound of that straight pipe Briggs.

[@woohunter1]

At the very least, with the widow maker you got there, chain guard and safety glasses.

[@jeffboatman8201]

Its gonna make for some AWESOME footage when that chain comes off.

[@1badcumminsjr]

Yup A simple chain guard Def needed

[@piratepete-thetruthisforevery1]

@ 8:00 the video shows this machine you built can be used as a food processor too LOL! Look out Vitamix corporation, this could be your next competitor... 🤣

[@OliverMotorized]

it does a poor job at that too haha

[@andypressley578]

That's one bad ass lawn mower 😁😊🤗😉😀

[@duncan6306]

Your edits are getting better and better man! I love it!!!

[@tyee4u]

My fave part is always the fires 🔥😂

[@TheWolfster001]

Nice build... Looked like the blade rotation maybe going backwards, that could be why it doesn't look like the grass is being cut, but more ripped and pushed down... I once built a double bodied lawn mower, I used two decks welded side by side, that could be a good build for ya, using that same motor but with two decks.. I loved mine... Keep up the good work...

[@thegenerousdegenerate9395]

Yup, she's definitely a blonde... Too cute. Doors are hard sometimes. LOL!

[@honeyman71962]

Are you absolutely certain that the blade was turning in the right direction in order to cut the grass looking at it from the bottom it looked to me like the blade was not turning in the proper direction and if that's the case it would be just knocking the grass down flat instead of cutting it that is something you might want to check into.

[@OliverMotorized]

The blade is on right but maybe the engine turns opposite the original

[@sixtyfiveford]

I'd use it.

[@calebralston7905]

What if you cut the front open, giving the blades more of a chance to cut the brush?

[@Hankbob_Hillpants]

I never thought I’d see something jankier than my homemade motorbike

[@pinkysgarage2779]

Awesome build man and no such thing as too extreme lol

[@dominicpetruzzelli3134]

It may not cut grass so well, but it makes a great tomato slicer

[@doublenickelbob]

I knew a guy who did something like that, what was his name now... oh yeh , stumpy.

[@bigpappahemi4263]

It's all fun and games until someone loses a limb.

[@jmaclaren4147]

The blade is spinning in the wrong direction.

[@rolandocrisostomo2003]

I like how you got so good at welding that stuff just started to weld itself. 2:48

[@bourbonn.pearls3151]

Tim Allen approves of this video...grunt grunt gruuuuuuuuunt

[@braeden20]

Put a chain guard on that thing broski! That chain is right in line with your junk

[@keithwittman4741]

And weld up a tensioner, flat stock with a bolt welded to it, and a sprocket at the end,pulling down the slack,between the two drive sprockets.

[@rverro8478]

The adult side of me says WTF ? The boy in me says "Cool".

[@robertmiller5735]

I believe the only thing it needs now is a spring loaded chain tensioner sprocket

[@rickyleblanc3945]

Would love to see this re-visited with the blade issue corrected.

[@Harleyforever20]

That idea is very cool however, it looks like a death trap.

[@jaketurner7863]

Need to rotate the angle drive 180 and use the other shaft to correct blade rotation.

[@93jake81]

The blade is rotating the wrong way. That's why it doesn't work

[@moz2186]

That's what I was thinking too!! I can do more damage with a string trimmer than that!

[@scottyjones27]

Try flipping the blade??

[@jonathantagg6527]

Turn the engine 180° and use the opposite input on the transfer box. The pull start will usually bolt on every 120° so you're not stood in front of it to start. So it won't chop your cock off.

[@scootergeorge9576]

@@jonathantagg6527 Or just sharpen the other side of the blade.

[@jonathantagg6527]

@@scootergeorge9576 just thaught of that... Urgh over engineering stuff again.

[@tweetydoall1755]

Mount that engine to a zero turn and put 4 wheeler tires on it. That shit would be boss

[@wags9777]

What kind of metal chop saw is that?

[@wags9777]

No really, I'm talking about the one in the background during the build. Also the same one he made a couple cuts with. I'm looking for the name brand of the chop saw used during the build.

[@robertk9043]

Makes a better food processor than a mower.

[@DigitalCruzer]

Cut front of deck off to open it's intake of brush, weld skids or wheels on side of middle of deck

[@twots22]

Nice frankenmower! Great skills!

[@keepinitgreasy7462]

I been waitin on a crazy cideo like this all my life

[@neelonghunglow]

I've been waiting for more Fire since the bicycle video! I'm sitting next to a Briggs that will fit into a ten speed....keep up the awesome!

[@jimmybritt9537]

Mowing and exercising at the same time 😁👍🇺🇸

[@meg9570]

That's one of the best things I've ever seen on youtube!

[@whyso8996]

Frankensteins lawnmower 😂 love the build very entertaining but I would have defo made a chain guard bud

[@quentin8094]

When there is a stump bothering you

[@IntelGoesHard]

Where did you get that differential type thing? That's a thing I could have used, but now I'm going to use a welded car differential

[@Bad_Actor]

That looks perfectly safe until the blade flies off and cuts off your foot...

[@OliverMotorized]

or the chain

[@brianeastman3547]

Cool man,Keep up the good work man.

[@OliverMotorized]

thanks Brian

[@baddogduering2492]

Tim “The Tool Man” Taylor would be proud. #MorePower!

[@pauljohansson7697]

I just subscribed to your channel and hello from New Hampshire.

[@maddogk9493]

May sound crazy but somehow can't you manage to get the blades to stick out about an inch from the front so you can cut the nice thick brush and eat it up underneath the mower. ???

[@mschiffel1]

Now you gotta make it self propelled with that V-2.

[@tonyskates6026]

Thats a really crazy powered lawnmower. 😂U just need to make a lawnmower gokart. Cut the grass and ride at the same time😂😂

[@OliverMotorized]

that'll be the 2.0 version

[@mykee426]

That's awesome. Now I have seen everything on KZbin lol

[@beaubeaukitty5301]

That is possibly the most top heavy finger & hand destroying Lawn mower ever bastardized into being

[@beaud3035]

Hell yeah!! Awesome bro! Great music choice in the five minute mark 👍

[@51-FS]

What kinda cuttung blade u useing?

[@yvesf5355]

Oliver Man I love your Video's and Also like the Music ,keep it up .....

[@wishusknight3009]

Blade going the wrong way?

[@xRemoveBeforeFlightx]

how's the track called thats playing at 0:37?

[@ils360]

where did you get that gear box?

[@OliverMotorized]

it was a junk yard find got it for 10 bucks

[@ils360]

@@OliverMotorized nice find! I need to find one of those for a project

[@sittinlow6787]

This is completely over kill and useless.... where can I buy one?

[@rapturebound197]

@Raymond Jayme ya made me laugh too!

[@walkermediaworx]

Did that transfer case lower the rpm of the blade? Maybe that's why it wasn't cutting... Just a thought.

[@OliverMotorized]

it's a 1:1. That's a good thought though

[@kaisersose5549]

So, what are the chances that the blade was turning in the wrong direction? There seemed to be an awful lot of stuff going in the opposite direction a lawnmower blade would normally move it.

[@bryduhbikeguy]

Time to mod a Reel Type.You can eat small trees that way.LoL.Put a reel on the push deck front,and belt drive it.What it doesn't chew,the deck will grind.*insanity has to start somewhere.It doesn't have to end there...

[@masterchu8044]

Well you went that far now just open up the deck more especially in the front and make some more adjustable and heavy duty wheels and that thing will go through alot lol

[@froggersgarage5127]

4 inch harbor freight tires that still move up and down 😆

[@robertmanley7556]

Dude let the haters hate its awesome it takes someone with talent and skill to build something using parts from other things that's a true designer / fabricator all in one I loved it keep building stuff man love your videos I think it's excellent for what you had on hand great work!

[@PaulHollandWheels]

No matter how strong the mower is won't cut worth a shit unless you sharpen the blade. But it was still cool as hell.

[@OliverMotorized]

I agree. the mower was actually a doner that I got for super cheep so it was in poor shape

[@PaulHollandWheels]

@@OliverMotorized Ah, I'm just giving you shit. Somebody has to. The stuff you make is to cool.

[@lesliegray3172]

Talk about a frankin mower it lives

[@glock21guy]

Love how you weld stuff on. So sure you'll never have to take it off or move it :D I would have put a guard on that chain and shaft though, so it couldn't come flying back and hit you. At least you wore a helmet after a while.

[@bigjay6743]

Something tells me that thing's going to tear itself apart.The old Moore deck just isn't strong enough but you never know I've been wrong before you definitely got the power now you can cut a hay field on with that thing LOL...