I tried GUNPLA - my new addiction?

Install Mech Arena for Free 🤖 IOS/ANDROID: pl.go-ga.me/ke... and get a special starter pack 💥 Available only for the next 30 days
❤️ JOIN the MINI CLUB (Patreon)! / tabletoptimeminis
🖌️ PRINT/PAINT our MINIS: www.itstableto...
👕 Get TTT Merch: www.itstableto...
TTT DISCORD: / discord
Twitter @TabletopTime
Reddit: / tabletoptime
Thanks to BlackMagic Design for helping bringTabletop Time back to life! www.blackmagic...

[@TabletopTime]

Install Mech Arena for Free 🤖 IOS/ANDROID: pl.go-ga.me/key9j54g and get a special starter pack 💥 Available only for the next 30 days

[@seedfan8548]

Thank you for finally getting around to including Gunpla on this channel. I would like to recommend the core gundam series if your looking to do a custom build.

[@HispAnakin42]

Gundams, Tau. Basically the same thing.

[@HyperKatatonic]

🎼Heyyyyyy mech arena 🎶

[@zweihanderexodus7594]

Murray seriously said “WONT YOU SHAKE A POOR SINNERS HAND?” And you did, so “ARE YOU READY” There is no escaping the gundam addiction

[@samdurfee6093]

That moment when you realize GW is scamming you.

[@TheMrBonzz]

Been building Gundams for almost 5 years now, can't wait to see how miniature hobbyist customise their Gundams compare to Gundam builders.

[@cabellism]

Been doing gunpla for around 20 years give or take. Bought my first Master Grade back in 01, the kit was produced back in 97 it was the MG GP01 FB from 0083 Stardust Memory. The amount of advancement ive seen come and go over the years for plastic injection is astounding. It is one of the reasons why I became a Engineer.

[@asiteforsoreeyeballs]

I’m coming up on 2 and 1/2 years and I couldn’t agree more

[@MKmaki6094]

Hey, been in it for 5 years now too! IBO was the revival of my love for Mecha and anime, I got my first Gunpla 11 years ago but I only thought of it as any other toy robot I have. Now I have a full catalogue of useless lore and have inhaled numerous paint chemicals, it's a thing I guess lol

[@orang7789]

As a warhammer40k painter, I’d like to try gunpla. The fact that I don’t gotta paint them is both convenient and a little disappointing lol.

[@MKmaki6094]

@@orang7789 I can suggest the Gundam Artifact figures. They're built a lot more like 40k minis, in that you can paint them up too

[@coltoncarr409]

The thoughts Dave had regarding pricing on Gundam kits vs Warhammer is exactly what took me so long to get into 40k. Also, nice first choice and welcome to Gunpla

[@neonx6202]

Yes I wondered why 40k stuff costed so much compared to a gundam like we have 10-20$ kits that give a great build

[@hansiboo657]

After taking some time with the gunpla hobby i can only imagine it's that it's the Games Workshop brand. There's a whole game attached to it and there are locations where you can play that game for free and all that stuff, which is GW using that value to justify a higher price point. When compared to a a Real Grade or low end Master Grade gunpla, an Imperial Knight should cost about 20-40 dollars depending on the type you get, if you're judging it exclusively by the hobbying itself and not the added brand value. I'm not supporting or justifying anything on GW's end here. I don't like how horrifyingly their prices are marked up.

[@ExTrEmEStOrW]

i used to build gundam but fell into zoids model kit lately, the pricing doesnt bother me cause i get more hours in the build compared to gundam , i could build 2-3 gundam a day whyle i build 1 zoid a day so its fun for me but yeah its fun to see people get into model kit building

[@joshuamartin7609]

@@ExTrEmEStOrW were you only building HG Gundam kits then? Because I couldn't even finish my MG Rx 78-2 in 2 days. My recent RG Force Impulse took me 5 days. Mind you that I wasn't even busy on the days I've built them.

[@ExTrEmEStOrW]

@@joshuamartin7609 no i used to build mg and a few rg

[@bobcartledge5250]

"This isn't even the right franchise..." Cue sudden, unanticipated bark of laughter. Well played, sirs!

[@mightyrobot42]

Yeah, in Gundam you don't get some creepy guy with glasses telling you to paint the robot, you just get slapped.

[@questingmoo]

To anybody reading this, the time and detail here is indicative of Master Grade gunpla, which are of a larger size. For most beginners I'd suggest a High Grade kit for their cheaper price tag (with some army builder type kits being ten dollars or less per mech) and ease of build

[@va5780]

To be honest almost every gundam kit is easy enough to build that people should primarily go for the designs they like. All it takes to build ANY kit is to be gentle and patient, hell, some of my friends had a PG (1:60 scale 36 centimeters tall gundam) as their first kit

[@crossbones8956]

@@va5780 I agree. I don’t think there much more skill in a HG to a MG, basically just more parts. I’ve been building Gunpla off and on since the early 00’s and the kits made today are so easy to assemble. I agree to just go with what you like and learn from there.

[@questingmoo]

@@va5780 part of my reason for suggesting a simple hg is the price. A Warhammer army builder will be familiar with expensive plastic, but it's still easier to try gunpla out with a cheaper model kit rather than spending upwards of 100 usd and disliking it

[@austinspradling65]

I think the three kits I would recommend is the Leo from GundamWing, The GM or RX 78-2, or the Barbatos from IBO

[@kingpacients424]

I've started with a PG and it was easy to build.

[@steelsaber54]

It’s literally impossible not to get sucked into building Gunpla after building your first kit

[@RezaQin]

100 percent. I built Zeta and now I'm gonna get 8 or 9 more to eventually build. Can't wait to build the RG Sazabi.

[@kryse4806]

real. Bought a crappy sd Gundam (sdex strike) cause it was cheap and I didn't know any better and I got hooked anyway, and now got hg, mg and rgs

[@jw70467]

Gunpla sounds like a disease.

[@JayYappa21]

​@@jw70467A good disease :3 (bleeding wallet)

[@Jayy997]

This is me! I built an entry grade Nu Gundam and now I have 4 more kits, two of which I haven't made yet. I'm also watching multiple shows simultaneously

[@raiden8604]

I love the idea of you guys customising a gundam, but honestly what I'd love to see is a converted gundam for something like imperial knights or T'au. I know that personally I'm considering using gundams as a basis for stormsurge conversions and I'd be really interested to see your take.

[@revtwilight9308]

Dave is doing a small tau army for one of the vids would be a great proxy to add for his army

[@mattdeeley4302]

@Lt. Lemon you've just given me a great idea! My gobbo revolushun army is going to have looted gundam mechs controlled by techgobbos!

[@CyberDagger003]

@@revtwilight9308 He mentioned in the custom minis video that he has a Tekkadan-themed Imperial knights force.

[@ndalum75]

Late response but if you can get your hands on a 1/100 Tieren, it might work well as a conversion for a Stormsurge. Has that wideness and stockiness you'd expect of Tau. Unfortunately it's an old kit that isn't produced much, so it may be hard to find. In lore it's also quite low tech, so you may want to do some customizing for its weapons.

[@UnexpectedDanger]

Seeing the clash of these two types of modelling hobbies is fascinating, especially from my perspective as a Gunpla builder, exclusively. I'm interested to see these techniques or approaches I wouldn't know anything about.

[@Samsminis]

Glad you enjoyed it! Perfectly fine to just pick "the one that looks cool" as your first Gundam, or "the one from the only show I saw" instead. High Grade kits are cheaper and faster to build, so you might enjoy futzing around with paint ideas on those more!

[@thecolllectors5659]

As a Gunpla fan for 6 years, here are the basics High Grade (HG) is a 1/144 scale with somewhat of a limited articulation and some kits often comes with a lot of stickers but here are some good ones HG Moon Gundam HG Infinite Justice HG Gundam The Origin kits and HG Char Zaku 2 Revive. for Master Grade (MG) 1/100 scale always comes with an inter-frame great articulation (builders love this line of kits) here are some of my favorite ones MG Freedom 2.0 MG Justice MG Jesta MG Dynames MG Kyrios MG Strike Remaster MG Buster and MG ZZ Ver. Ka. Perfect Grade (PG) 1/60 scale the biggest and the most expensive a lot of mechanical detail I would recommend PG Strike PGU RX-78-2 and PG Astray.

[@Jc88500]

You missed RG, combining the 1/144 scale and affordability of HG with the Inner frame and gimmicks of MG, and the high parts count and exterior detail of PG. Real Grades aim to replicate the appearance of a suit as if it was built in real life (in fact all of the life size Gundam statues in japan and the freedom Gundam in Shanghai are based on the RG designs. The exception to this is the RX-78 F00 in Yokohama which is an original redesign of the RX-78). RG is also known for the ‘Advanced MS joint’ where some single parts are able to articulate, this was cool but it lead to stability issues in early RGs since they relied on the advanced ms joint for most of their inner frame and they had a tendency to get loose over time. Recent RGs however, have been absolute masterpieces. Since Bandai phased out the Advanced MS Joint frame, they’ve become more like mini MGs but sometimes they even surpass MG. The RG Nu, Sazabi, Crossbone, Unicorn and Wing TV are some of the best kits I’ve built.

[@trixynetex9692]

Applying streaking grime in a controlled manner!?! What a genius idea, revolutionary in fact 🤣

[@etiennevanier]

I ordered my first gunpla, a master grade Sinanju. Hope it all goes well. Wish me luck, gunpla veterans.

[@vernondelacruz7812]

Becarefull with the joints especially the waist joint as the plastic they used on that one is quite britle.

[@cabellism]

@@vernondelacruz7812 I will second this in a heatbeat. The waist plastic they use where they leg pegs into the waist, it can be stressed easily and snap.

[@samhardy4167]

That's a big kit to go for first good luck

[@etiennevanier]

@@samhardy4167 I have warhammer experience. For the emperor!

[@alexisrodriguez6526]

I wish you the best of luck, sinanju suffers of a weak waist

[@lekoro1]

Barbatos is not a misspelling of Barbados its the name of one of the dukes of hell in the lesser key of solomon

[@Selvanus]

May I just say, my heart fecking stopped beating as soon as I saw the thumbnail and title… this is literally my favourite channel and I just started properly getting to Gunpla (planning a kitbash)! The coincidence is amazing so I am one very very VERY happy mech obsessed hobby starved Pole Looking forward to perhaps more content on Gunpla on the channel!

[@Eteric]

Dude, you're not even scratching the surface yet. Scribing, customizing, detail up parts, it just goes on FOREVER. MOAR GUNDAM!

[@taylorkreate]

the timing for this is terrifying i literally just bought a gundam model today

[@taylorkreate]

i wanna convert it into optimus prime because it doesn’t seem too challenging but i do wanna do a kitbash

[@ClarissaMeyer]

Using the example minis as "labels" for the streaking grime versions is a stroke of genius! And I love how posable the Gundam is. I wouldn't mind more videos like this.

[@szabib8048]

You could do a gundam fight (maybe 3/4/5v5 units) on a larger scale diorama with some war40k or other gameset rules? That would lead to plenty of content (army, diorama building, actual fight, etc.)... Or you could do a Cogent roleplaying session in a gundam universe, with each player having their own model? Make it a mini series, and after each episode you have to paint/deform your mech if you sustained injury? So they "evolve" as the story goes?

[@nicholaschew8649]

Yes more gunpla!!!!!!!! I can't wait for your customization on your model. Just a friendly tip is that streaking grime or any enamel wash might make the plastics to become brittle especially when u apply in the panel lines.

[@DRCsyntax]

The "lower quality" HGs are actually really great for customization and practice. Seen some insane HGs that put OOB Mgs to shame.

[@Vross_MKII]

I like to think that hg’s are a benchmark to see how much I progressed over time doing this hobby

[@StudioRevoct]

Man the Barbatos seems like a go to starter Gundam for a lot of people, though I started with the Gouf.

[@flat_chumblo368]

I mean it IS absolutely badass haha

[@shogun1528]

I started with a strike freedom

[@gabrielporto5610]

Started with the Justice Gundam, but I got screwed because his "glassy" hip joints (which I gladly changed with metal hips and solved). Last year when Eclipse launched i felt nostalgic when I saw this freaking f******* joints again HAHAHAH

[@eligonzales186]

I started with an SD Ganso Deathscythe Gundam

[@flamestoyershadowkill]

started with moon gundam (broke hips out of my own stupidity)

[@danielcervantes7826]

Wait till they see Custom Gunplas, also try looking at High Grade kits(HGs) instead of Master Grades(MGs) for customs. What would be really interesting is if you painted maybe a Zaku platoon or a Gundam Ground Type Platoon into a 3-mecha unit and give them stats for playing in Warhammer. I have been working on a personal project to make a tabletop wargame based on Gundam mixed with Flames of War and Bolt Action rules, so it would be interesting to see what you guys come up with. I might just base it off of WH40k rules if I find it to be suitable for mecha-tank-APC/IFV-Infantry-Aircraft combat.

[@yellheahtris]

Id of course love a custom paint one, but seeing how long it took to put together made ME go crosseyed! Lego in steroids! The touches of personalization really brought a lot of life into the model!

[@ZhysaytheBandit]

@YellHeahTris try an HG (High Grade) kit, they can be put together much quicker than the MG (Master Grade) kit. They are the normal entry point to Gunpla, cost about $10 - $35 USD, and only take a couple hours to build.

[@Kodaiva]

they dont really take that long

[@thompkins6796]

Some take longer than others, HGs (High Grades) are much quicker and can be done in two hours if you really focus while MGs (Master Grades) usually take a day. But even between the same grade there can be a lot of difference in how complex they are. I would actually consider the Barbatos a relatively quick model to build since the armor is simple.

[@eomersimbajon2938]

@@ZhysaytheBandit theyre remaking Entry Grade rn so maybe HG wont be the "Entry Grade" anymore with the new Entry Grade Strike Gundam, and Entry Grade Granddaddy (RX-78-2) Gundam. we should update this kind of... policy(?) for beginners now and that beginners should start ACTUALLY start with Entry Grade like Bandai always thought of xD

[@AKKK1182]

"So I was thinking why do these kits cost this much for so much more and better models..." Meanwhile Games Workshop: "I like money!"

[@MrNiskratus]

I also came from 25+ years of Games Workshop and built by first Gandam kit about 3 years ago, the mechanical functions of the kits just blew me away. I would love to see a fully custom paint Gundam, as I've only done 1 custom paint job (all brushes, no airbrush) and I'd like to see how you fair.

[@shonenbag6478]

Daaaaang, it came out incredible! Better than my first to be sure. Just a word of warning though, they don't call this hobby "plastic crack" for nothing!

[@caldoesstuff7290]

1:05 “if you’re into mechs you’ll be into “ Me waiting for him to say Battletech. For real though I would love to see them painting some mechs from Battletech.

[@SandDeath]

What's cool is they have special 'flow" type markers for Gundam that do the paneling wash you made but in the convenience of a marker. As well as a marker remover maker too.

[@patchoulidaze7193]

nice to see Warahmmer modelers touch gundam kits, coloring mono colored models isn't so beginner friendly, and I'm amazed at the coloring on some warhammerkits, would love osee more kits done by you, especially some of the "waifu' or anime girl kits like megami device or frame arms girls

[@Neg4Cubing]

I had the same realisation when it came to the price to plastic ratio when it came warhammer vs gunpla. Was building my custodes army but probably won’t get into warhammer because of what feels like a major over pricing of gamesworkshops side. The only way I can see them justifying the price is that they are game pieces while gunpla are models….. regardless my main hobby is gunpla and for anyone who lives around Townsville Queensland, we have a Gunpla group that loves to share builds!

[@JakeWhittle]

The way they justify it to themselves is we're shouldering the cost of making the metal master templates for each kit. The reality is that in times past they were the only majorly successful wargame miniature company. They'll realise in the next few years though that their price range needs to be be lowered before they fully lose out to custom 3D printing for a fraction of the price.

[@fagocol98]

My main hobby is gunpla, but minis are fun for me because I can see tiny stuff easily, like I can count the pixels on a 8k TV, yet I can't see from a far without glasses. I wish warhammer was cheaper. But then again I could just probably play gundam skirmish if I want to fill that war gaming void.

[@Neg4Cubing]

@@fagocol98 me and my friend use gundams in gamma wolves, we use actions bases instead of the different base sizes

[@fagocol98]

@@Neg4Cubing nice

[@Gundumb_guy]

It’s about time! I couldn’t tell you how many times I’ve spammed the comments on all the miniature guys about them building gunpla! There’s no way that cost that much, must have been for the total haul, probably closer to 60

[@cyridath]

The MG Barbatos kit runs $84.00 USD so the price of 160 might be about right for the Aussie Dollar.

[@Gundumb_guy]

@@cyridath right now it’s like 55 on USAGS and they aren’t the absolute cheapest place to buy kits in the states (but still my favorite and preferred seller) and it’s one of the most common kits I see from site to site so if you pay more than 65-70 bucks your kind of getting ripped off in a major way. So if these guys have to pay 160 at a brick and mortar store to get that same kit I truly feel sorry for them because that sucks! Even if they bought it from usags the shipping would still kill you and it would probably be close to 80-100 bucks at least. Probably better to order from japan at that point like hlj or the likes.

[@werebear76]

Welcome to the wide, wonderful world of Gunpla. You're gonna love it here.

[@Philbrush]

So glad you got the opportunity to put together a gunpla model...I have the RX-78-2 (MG) and the Strike Freedom (MG) which is my personal favourite gundam. Would love to see you guys fully paint and maybe diorama a gunpla model...might give me the confidence to do the same with mine!

[@vankrelian]

Awesome, I'm so happy to see Gundam getting the love it rightfully deserves here! This gunpla is pure joy, I just finished customizing my own battle damaged Barbatos and even made my first diorama with it.

[@kazuyakenzaki1320]

I like to think of the gunpla community as a very welcome and loving place that brings you to A VERY FANCY AND VERY EXPENSIVE HOTEL and then locks all the exits once you go in.

[@breakingbasha]

just btw 110 au$ is even on the higher side for this kit. A good deal for t can be around 80. And in Japan the msrp which many storres also discount is around 60

[@shanerussell7335]

“Big guns” you say? Take a look at the MG FAZZ or Deep Striker. I would also recommend the Heavyarms.

[@lupolinar]

Well.. the Deepstriker ist basically just a statue and it is quite expensive.

[@XaoFakeNick]

Warhammer fans give us great gunpla videos. This was awesome, I got some great ideas here. Gunpla is freedom.

[@NiskRanThawll]

My first Gunpla was a "Deathscythe Hell" back in like 1998 :) loved that little kit i also had a "Wing Zero" too bought at the same time (basic kits not masters). I never truly got into Gunpla, sadly I stuck it out with GW... wish I had of switched to Gunpla now.

[@vamthedestroyer]

Its really nice to see worlds come together like this. Ive been building gunpla for just over two years now and painting them for just over one year. I took most of my inspiration from the armor model guys but it's nice to finally see these worlds being bridged.

[@PixelBlit]

This is great as someone who recently got into gunpla themselves. In case anyone is interested there is a tabletop wargame that you can use your gundams in called gamma wolves and its awesome!

[@2dola]

I spat my drink dave, the neon genesis skit was hilarious, and that gundam is awesome. Awesome work as always

[@TheGlobalProfessional]

That was hilarious. 😂

[@RaqrexArt]

I assembled a few Gundam models when I was a kid but this video has me so inspired to pick a new one up! 🙌

[@jedisalamander2457]

You wont regret it! Well, maybe your wallet will, but you wont!

[@marcusbond7335]

Love me some gunpla. Pro tip if you want a battle torn gunpla - a soldering iron will be your best friend. Beam rifle holes, shell blasts on shield or armour plating, deep cuts from a laser blade or the more archaic weapons of IBO (would need to use nippers or a stanley as well for best effect). Theyre all gonna look great once you get the technique downpat. And while youre mastering it just sacrifice a few SD models

[@akaicymalice1562]

Its awesome to see you guys branching out I Started collecting gunpla a few years ago and just recently started painting tabletop models. I've wanted to paint one from the beginning but haven't gotten around to it yet.

[@3DIYshow]

Gunpla has been my new favourite hobby this year so it's super exciting to see you guys do a gunpla video! I'd love to see more 😍

[@ZedtheDead_OG]

I have to say my two favorites to put into a diorama was Barbatos Lupus and the Hashmal of Iron blooded orphans season 2

[@KCDarkRanger]

I was at an Japanese import/hobby shop one day, my friend was building Gundam, I was painting warhammer, and I ran out of warhammer to paint... so I started posing my friend's models. The shop owner liked chatting with customers, and he came over and saw the models I was posing and was enthralled. He asked how I had managed to get the Gundams to stay in some insane freestyle poses without any stands, and asked my friend if he could photograph them and use them as promotional material for the shop. Was a neat little experience. Never got into the hobby though, too poor between college and WARHAMMER!

[@TwistedBobbay]

Got gifted the exact same model kit, first Gundam ever too and coming from a 40k background, I was blown away by the thing. The articulation was just super cool, the push fit as well although I have used some thin glue just to seal some gaps (mainly on the gun) and I'm looking to paint it up as well.

[@Nezareps]

I’m building a master grade Barbatos. It’s a great kit. And I can’t wait to see how it turns out.

[@haitolawrence5986]

Same. Got one for Christmas!

[@solluxcaptor3914]

Same I got one for 25 usd at barnes and noble

[@12DangerMouse]

lol the cut on murry using his hand to black out the screen and you waited till after. subtle genious.

[@Trinioutsider34]

I've been building Gunpla since 1998 on and off do to the pricing of some kits. It's always cool to see Miniature hobbyist get into Gunpla and try it.

[@teenyweenymonkey]

I’d love to see you guys paint a gunpla using miniature painting techniques you’ve learned.

[@Acidsplash69]

I come from a basic W40K background and the wife got me some Gunpla SD for xmas. Today my first 2 RG kits arrived and i can't wait to build them! Hope you do more

[@samuelbautista6559]

I am a gundam fan and this is the first vido of yours that i've seen. I am looking forward to your future gundam builds, nice video congrats!

[@Mouse_Hunter]

Ha this was exactly like when I did my first Gundam, got it, made it, did the panel lines and said done. Showed a guy at work that was into them and his comment was "are you planning on painting and weathering it?"

[@RangerSpartan7]

Ive been doing gundam since I was kid... a long time ago. Glad to see you guys dabble in it on the channel!

[@jacklflynn1]

"The robot is your robot Murray the robot in your mother Murray paint your mother!" When I say I cackled Hahaha

[@plamoverse]

More techniques! Thanks guys! As a beginner in gunpla and airbrushing, i appreciate this so much!

[@GreenBlueWalkthrough]

Yes more Gunpla! I've been looking to get into it my self so this was nice to see! And maybe a video customizing each grade tier?

[@kasparvanleeuwen7421]

Really fun to see you try something new. It took a true stroke of genius to apply the streaking grime in moderation. Would love to see more customization!

[@Voirreydirector]

Well done, kids! I would love to see how you store and display all of your models, and yes, more mechs please! A squad of mechs to help disabled soldiers would be very cool.

[@YesterdaysFate]

I'd love more Gundam model videos! This was a great surprise because I'm just starting to try to get my partner into Gundam models, starting with the Hello Kitty/Char's Zaku II, and am hoping to get back into model building myself at the same time.

[@geagesgaming]

Gundam and Zoids were the first models I ever built, so great to see them getting some love!

[@giaminhhuynh1771]

You can choose to make the panel lines a little bit more deep to get a more satisfying flow while you put some panel line ink to it.

[@bryceneuberger3460]

I would love to see you guys put together multiple kits to make your own custom Gundam. I would also love to see the rest of the TTT crew do that and run a small Gundam RPG

[@XcryohazardX]

You should try a diorama out, the different scale may throw a wrench or two in the plans

[@derekwray2486]

Oh my lord the Eva skit had me crying laughing "this isn't even the right franchise" LMAO

[@mikeyallen6758]

the underrated comedic value of that lack of smash cut at the start xD

[@matthewhibbard9807]

The MG Barbatos is such a great kit. Just the torso alone has 8 functioning pistons. Crazy level action poses.

[@channelname3262]

quick tip: the white piece on the back of the foot folds backwards to free up the ankle roll even more.

[@theycallmepiccolo9985]

It's a actual pain i got in to gunpla last year and I can't easily find any kits in the UK or with out getting ripped off with postage

[@RM_3D]

Yeh UK sucks, for anything craft/DIY related theres fuck all xD

[@iconthe7324]

@@RM_3D the only thing semi available in the uk is 40k lmao

[@comradedangerfield]

now you know how everyone else in the world feels about games workshops stuff

[@JakeWhittle]

Semi-available? It's made here.

[@MechaTheSpider]

ATM the entire world is experiencing a gunpla shortage thanks to the pandemic; all gunpla comes out of one single factory, and japan's state of emergency absolutely destroyed their production.

[@timeconsumer325]

I've only done a few MGs (and tons of HGs and RGs) but the MG Barbatos is absolutely one of my favorite builds I've done.

[@derekwray2486]

I actually came from the gunpla community and now I'm painting miniatures lol they cross over pretty well

[@skeeter5076]

Friendly tip for anyone new to the hobby, Tamiya Panel Liner/Panel Line Accent Color will *crack* untreated plastic. It's great, but you *have* to topcoat it first

[@131unicorn]

been building gun dams since I was 7 years old!!! I started from the SD series now I'm just turned 18 yesterday ,I well suggested y'all try the OLD/ vintage models or series like the MG side the ZAKU ll 2.0 z'gok the Gyan and gun tank ..... Those who from the2003~2009 is the time Bandai decide to focus on the in side frame and also the real grade NU Gundam was crazy too so come to the end I guess over 11 years later I still Can’t get tired of building them 😅

[@jasoncombs3232]

I wish Jeremy would build a gundam.

[@dakloud6817]

I love the video! And the EVA segment was just genius!

[@HobbyWorksbyRani]

It will be fun if you make a table top story using fully customized gunpla /gundam model kits

[@joelwismer]

Yes ! Finally a crossover video ! Fantastic video guys, I love it. Oh ya and yes please do more Gunpla builds / videos this one was excellent ! Thank you

[@Aespecter_374]

I, personally, would love to see more Gundam, but it is quite expensive, so it's your call.

[@DrSteamCS]

If i remember correctly the barbatos kit they got is about the same price as a box of space marines

[@majorkurn]

And the HG line tends to be a third of the price but a bit smaller 1/144 scale vs the master grade's 1/100

[@WongBak]

Honestly, if you buy a warhammer mini with 100 mm height, it easily costs you 100 USD. A Gunpla kit with 120 mm height costs less than 30 USD.

[@angelabernhardt6761]

I love this channel. Have I mentioned how much I love this channel? Dave and Murray are adorable.

[@vectorshaman338]

I have a few in the basement from 25 years ago. They were my 1st forray into models when I was a teenager. Sweet Baby Jesus that hobby store. One of the kits I still have could transform into a jet to a standing Gundam, and 25 years old could transform!!!! There is a chic painting gunplay and did airbrush candy paint and mind blowing process. Basically same technique as on cars O_o

[@NokasaTenma]

I like how he pronounced Barbatos like barbados, as a builder of em its actually good that u started with a master grade barbatos because it's a fairly small kit for a master grade and its large so it's easier to build

[@creditguys1358]

It would be awesome to see more gundam on the channel, specifically the smaller kits like High Grade or SD Gunpla, as those are what I like to build, plus SD & HG kits have a lot of compatible parts & large amounts of various mobiel suits between them to pick from for customizing.

[@ThatGuy-wq4mh]

Keep up the Gunpla building. Enjoyed the video.

[@nicholasmascitelli8129]

So happy to see you guys build what is to this day my favorite Gundam (tho not my favorite version of this particular gundam) And I think seeing you guys tackle other models would be a lot of fun

[@bladeriders]

I've been getting into gunpla a lot since getting into the miniature hobby. I have used my 3d printer a lot to print out guns and weapons and have even learned how to model my own things for the mechs to hold. I'd really love to see you guys make a RG (real grade) Sazabi and make it your own with the full recolour and everything :).

[@ARDIZsq]

I don't know much about Gundam, but I LOVE building the Evangelion model kits. You should totally give those a shot too, and maybe even custom paint one of your own. (You know, considering you sang lyrics from the OP and did an entire Gendo and Shinji skit) Actually, let's go to the next level. Get an Eva model kit and make a diorama with it. Shinji and Eva-01 destroying NERV HQ, a battle with an Angel, 01 and 02 fighting the twin angel together, 00 with an N2 mine, there are so many possibilities. Do it Tabletop Time. Get in the robot.

[@laurenmations4978]

@Rat I normally use Hobby Link Japan ((I’m in the uk so getting them is a pain)) but they’re very rarely in stock so you have to be patient

[@zephron28]

Soooo am I the only one expecting the next TTT video to just be Jazza buying an old oil drum, filling it with streakn' grime, and just dipping everything in it?

[@CreativePhenomenonArt]

Last and only time I built and painted a gundam was over 15 years ago. That tip with the liquitex paint 😱😱😱 dude I used a fine liner. It was so satisfying to watch the lines get filled in. Super dope 👍

[@ajohndoe17]

“Giant Whacky Stick” is now the canon name of the weapon.

[@MrCOLBSTAH]

Isaw the thumbnail and was like.. YEEEEEEESSSSS... Barbatos. Good choice jazza!😍

[@awesomechainsaw]

Actually Gundam is straight up why I didn’t get into Warhammer. Why pay 150 dollars for diminutive models. When I could get myself 2-3 master grades. Or tens of High grades and accessories.

[@milgeekmedia]

I've been curious about Gunpla - I used to be a military scale modeller but just over a year ago I had a stroke and although I am on the mend I have lost the ability to do the minute and precise fine painting and weathering and modding skills that I used to have. 😒 However, I like the fact that Gunpla, while scratching my need for detail, is pre-colours and doesn't need glue... In short it removes some of the issues I now have with traditional kits. So, I'm going to give one of these a go, and see if it right for me. Thanks for a great video.

[@collegeoffoliage6776]

Please try some privateer press minis or games next! I really love the gameplay, and some of the sculpts are also gorgeous! :)

[@vali69]

Gundams don't usually come with katanas, it's only the barbatos and the astray, only these two have katanas, the rest have beam sabers, which are basically lightsabers.

[@stormcloakgundam8264]

Paint the HGs like how u paint minis 🙏

[@S1RVicTOR]

*Chanting Starts and Grows* "more gundam, more mecha" "More Gundam, More Mecha" "MORE GUNDAM MORE MECHA"

[@ChaosArmoury]

I had a half-finished kitbashed custom Gunpla that was lost during a move. I really need to give it another go now that I have more hobbying experience and better tools. Actually, I should finish my current Gunpla backlog. I haven't built a new Gunpla in years.

[@paigemoehlman9753]

Would love to see another Gunpla video! Ive started building Gunpla after friends loved seeing me build miniatures and I started on one I really like called the Zaku 2. I went with an arctic sniper paint job and would love to see what y'all do!