athaayathu yencivilu auttputtu allamkoodi orotta en si vil kodukkaruthu, athu 20 aayaalum 25 athu angane cheyyaruthu, siksinte poyat undo athinu oronninum seporattu siksinte yency vachu cheyyaan, ennuvechal sittinte yencb venam auttputtu kodukkan angane oro bhagathottum seporattu kodukkanam
@abinjoseph8637 ай бұрын
Hello, that is, when the inverter points, the input is taken by RCCB. If there is RCCB, a separate NCV should be placed after RCCB. To do this, don't put it before RCV. The RCC's carry should be given. Then the output should be given separately to everything. should give
@abinjoseph8637 ай бұрын
pinneyaanengil allaavarkkum ariyathillatha oru kaaryam koodi undu rcc pikkum koodi namukku chenju avar kodukkan pattum
@user-wl4qe1yf9x9 ай бұрын
Bro engane invertor conection kodukkumbo 6 modular box and plates കൊടുത്തു 2 സോക്കറ്റ് 2 switch കൊടുക്കുന്നതാണ് നല്ലത്...അതിൽ ഒരു switch 2way ഇട്ടാൽ നമുക്ക് അവിടെ തന്നെ വീട്ടിൽ ഒരു ഹൈ വർക് വന്നാൽ 2way switch ഇൻവെർട്ടല് നിന്നും മാറ്റി kSEB യിലേക്ക് മാറ്റാൻ കഴിയും
@TouchTouch9 ай бұрын
Ok bro 👍🏻
@abinjoseph8637 ай бұрын
athinaanu aarsisikku chenju ovar kodukkunnathu, pinne athinte kanakshan cheyyunna saadha chenju orine kanakshan cheyyunnathupole alla, vyathyaasam undu au nallavannam ariyaamengil maathrame cheyyaavu ariyillengil chodichal njaan paranju tharaam enne vilichal mathi
@abinjoseph8637 ай бұрын
Then there is one more thing that not everyone knows, we can also give change hours with RCC pick
As for me, I like to share my doubts, but the problem is that I don't ask
@abinjoseph8637 ай бұрын
Why is it given like that? If there is a motor that has been taken down a lot in the bye chance, there is no need to pull it completely, it is enough to raise it completely. When the motor is done, it turns straight back, and when it's done, it pulls the LCD away with it
If we put it that way, when the inverter is pointed, the output and neutral should be added, otherwise the danger that will happen is that if the input wire is removed in the by-chance, when it is removed, the current will flow to the neutral of its leg because the output neutral is not provided, and there is one more thing that is new in the inverters that have to provide the output separately. In the coming inverters, there is an option to give the output separately. In such inverters, separate output should be given, so separate output should be given and the neutral should also be given in the separate output.
@abinjoseph8637 ай бұрын
That is, don't give all the output of the NC to a single NC, even if it is 20 or 25, don't do it like that, if there is a point of six to put a separate NC of six for each one, that means the NCB of the sit needs to give the output, so it should be given separately to each part.
@HU_DHA_HAID_9 ай бұрын
Meeter boxl ampire A N thammil differnt und ampire 1 aanengil A n 2 aan ullath current bill koodunnu 1month 2500 aanengil next month 5000 angane okkeyavarunnath reason pa