I've Been Waiting 5 YEARS For Mooer To Do This..

[@bloodstreamband]

You’re a blessing on this platform! Thank you for what you do, Taylor!

[@ELECTRICSCARS]

This is a huge slap to Fractal Audio, Quad Cortex and Kemper. I am glad that there is finally a Competitor that can stand up to the three Giants

[@DavidAnthonyFlores]

@ELECTRICSCARS it's not for fractal. Their amp simulation alone is amazing. Now the only question is, what about their FX. Fractals FX are top tier. Some of the best out there and many people including Steve Vai is fractal for their fx. Also Keith Urban as well as many guitar players like the guitarist for Bruno Mars. I just don't believe their fx are as good or as detailed. Big doubt on that one there. However, it does provide value though. That's not to say this sucks. It's like, Line 6 fx vs fractal. The fractal stuff just sounds better. Line 6 still rocks though.

[@thisguy2973]

18:17 I think having a battery model is to ensure you have a backup in the event that your pedal power fails. Some musicians don’t care about first-points-of-failure type issues

[@benjamincardenas4219]

I have the GE250 for about 5 yrs, it’s a perfect size for mobility that includes an exp pedal. I power it with a battery bank of my choosing. It’s my back up modeler to my headrush core now but the GE 250 is still a very capable unit. Mooer is def all over the place in regards to self cannibalizing overlap between products and product lines. The GE 1000s touchscreen and battery wasn’t enough to make me upgrade from my GE250. Headrushes vocal capabilities were however. Great content, thank you.

[@noodlehair6566]

This is what the nano cortex should have been.

[@Monkeymansdrums]

I think i'd prefer it even to full size cortex, because it's like 1/3 price and more than enough for me. And battery! no more shitty power at the gig

[@二加二]

1:57 In their Chinese manual it says: 将您喜爱的设备“收入囊中”。 It means: Put your favorite devices in your pocket.

[@ericdpeerik3928]

Clearly Chinese people have much bigger pockets than we have 😂

[@JamieSlays]

The capturing sounds great. I want the LI so I can just jam on the sofa

[@netrunner2049]

Sounds killer. Tempting especially paired with that Tonex Cab.

[@heavybrett-al4082]

!! Another extremely useful budget modeling unit! I can't keep up, everytime I consider and research mooer,Nux,ampero ....ECT...these companies bring out a new one with slightly better features. Man it's a good time to shred.

[@a-nus]

Finally! Another VST in a box! Brave! Stunning! 😅

[@DreidMusicalX]

Mooer has come a long way. I only have a couple of their pedals and I still haver both on my pedal board in my effects loop. Mooer Gold 012 Pre amp pedal on the blue channel, and that Radar cab pedal and I leave it on the number 27. Those two are always on and always in use. They just give you a kick as boost and tone. and then use my Tonex, then to head and cabinet. But watching this. I might be trying some new Mooer stuff now. I mean the pedals I have still work and its been at least 6 or 7 years I've had them in constant use. Thanks for posting this. My woman will now kill me for spending more money on myself. haha!

[@sevel7556]

For 299 this would be amazing, maybe even 350-400 would be fair, but for the price there’s to many competitors

[@KillaFXZ]

Alright! More Taylor content! Great review!

[@Tmh3rd]

Holy cow!

[@ShreddingFinn]

I dont see myself buying a Mooer product when they are pricing themselves along the heavy hitters. Might as well hold off for another couple weeks and save another 300 for an fm3

[@mtus647]

What do you mean? The FM3 is basically twice the price of this 😂 And I could be wrong, but it doesn't have the capturing capabilities afaik?

[@CryptToneMusic]

I can't see myself buying any modeller for that price really especially when they can just break randomly and be a paper weight. I would go for one of the cheaper ones like 200 bucks or something I don't need all the features in the world

[@LuLeBe]

@@CryptToneMusic randomly break? What computer has ever "randomly broken" on you? Sure you might have stupid bandmates that throw it against the ceiling while drunk, but they'll probably destroy any amp as well by spilling their beer. As long as the metal construction is good on these devices, they'll last.

[@a-nus]

Fractal schizos are the worst.

[@notsure1135]

@@LuLeBesure, things never brick ever…

[@greblus]

MNRS profiles are actually very good for high gain amps. I wanted Mooer 017 micro preamp on my pedalboard to use it via FX return of my amp. Prices were crazy so I decided to buy X2 preamp. It came broken but the seller got a replacement for me from Mooer. Works great with JP2C MNRS profiles from Choptones. Not to mention that a friend's friend fixed the broken one for free (just re-soldering the dsp adapter socket) so now I have two 😊. Mooer is a great value for the money. And to be honest I like it more than my Ampltube/Tonex re-amped profiles. Only a few NAM profiles sound better, most if not all for vintage, old cleanish/edge of breakup amp tones.

[@jeffjarquin3570]

Damn nice stach

[@th4riz]

I have that same stand you are using for my QC, its still holding up well

[@ichibandude]

I’m bagging, bagging, bagging you~

[@robertclarkguitar]

Mooer kicks arse.

[@robertclarkguitar]

Price to tone. I'm loving the P2.

[@DaringDan]

The Valeton GP200 will still be the budget king in this space.

[@smeemusic]

Taylor thank you for covering gapless feature. I am one of those sensitive to it people you’re talking about.

[@SectionEightGuitarist]

Mooer just recently piqued my interest in a big way. I just got the GL-100 looper and i've been super impressed with how it performs. I'll definitely be keeping Mooer on my radar

[@_thepowly_]

This is the "Order a Quad cortex from Temu"

[@KaiDown]

FINALLY

[@BossViciousStudios]

Can you export the IR back to a PC?

[@distortionua]

And now mooer is like -HEY, EVERYONE IN THE OFFICE, WE SHOULD MAKE A RACK MOUNT VERSION OF EVERY SINGLE ONE OF OUR PRODUCTS -should we also include things like bags for pedalboards and footswitch toppers? -EVERY. SINGLE. ONE.

[@SHREDTILLDEAD]

I can make like 100 or more profiles in eight hours or so on a kemper. They need to bring that 3 minutes down, more workflow means more expensive produced packs.

[@MegaRomans01]

hey Taylor, to respond to you ending question. I don't think its the number of options in mooers line that is the problem. it's the outlining of the products that causes the rub and maybe makes customers move on to something easier to digest. In remedy I would (if not already available) make a chart that compares directly all the varying features across models (with model release dates) in an easy-to-read format and display this on all products to foster congruency as people compare. I would also suggest future naming schemes that create a series with easily recognizable names to help define/differentiate between products and their target consumer needs. (ex. a mooer series called "curb stomp" being all 2 button units. these units in series would be "curb stomp" model "soul preacher" "block party" "ultra-sonic" etc. the larger capturing units could be in a series called "sound lake" with model names like "neural swan" or something similarly outrageous. Random letters and numbers we see everywhere it has no staying power in our minds and makes it hard to compare. The point is to have a funnel for people to follow. so, my suggestion is "select a series, use features chart, get name and information of desired products, than be assured in future support" the names being outrages helps the staying power imo. This is just my feelings on the issue I don't have a marketing education.

[@Pyuras]

I think the biggest problem with Mooer is the lack of continued, long-term support for their devices, especially their flagships. They did like 3 or 4 updates for GE-300 and then called it a day. Compare it to how Line 6 treats it's flagships products, 10+ years and they're still putting out updates. I'll never buy a flagship Mooer product again if they continue this trend.

[@MegaRomans01]

@Pyuras ya at the cost of the flagship models that is def lame and pretty unacceptable when compared to what the competition is offering. What kind of things feature or support do you think they were missing?

[@SerpentsBane1995]

Leo Gibson does a pretty good job of doing comparison charts in his videos!

[@ptakleo]

Sold my Kemper 10 days ago. Just in time it looks like

[@MarkaryansChain]

AWESOME! Now you don't have to wait anyMooer

[@marks9197]

Ha Ha

[@xakcisx]

Lol

[@mrrnrob]

How Much?

[@tonvks]

I love what Mooer has got going right now brilliant ideas, but for fck sake, the lack of customer services is "nonexistent" and firmware updates on older products are irritating to wait for

[@R3dbudd]

If I left the HX ecosphere I would go ToneX or Hotone. I really wanted a GE300 but they just didn’t seem to support things after they dropped them. Spoiled with Helix updates.

[@fuckinliveinsin]

don't buy Mooer if you want your hardware to maintain its value and getting updates to maximize its potential

[@smeemusic]

$520?!?! Umm I’m sorry but FUCK YEAH!!!! You have my full and undivided attention! That’s the most fair price for such a feature rich pedal I’ve seen in quite some time. Bravo Mooer. Bravo! I’ve been looking for basically exactly this for years now. I really don’t need all the effects but I’m not arguing with that. lol. I’ve just been waiting on this form factor (4 switch, no built in expression pedal, touch screen, midi capable profiler). I have a pretty awesome rig as it is but I wanna be able to go ampless if I need to. As it currently stands, I cannot do that. I’m stuck having to use my amp. I have a couple boost pedals but no actual preamp or distortion sounds. I get all that off my amp. I also don’t have cab ir capabilities. My rig is super bad ass… for 20 years ago. lol. So I just need one small piece of gear that I could still fit on my pedal board. I could replace my boost pedals and maybe compressor with it. And have presets for using my full rig with an amp and presets for going direct. Maybe even potentially have another preset where I would need to also add another rockboard patch bay to my board so I can go direct AND use my full rig at the same time. Idk. I day dream sometimes. Ribbon mic shootout yooooooo!!! Lol

[@fuckinliveinsin]

they are gonna drop support for it in 12 months, just be aware of it.

[@dasczwo]

maybe i skipped it.. but can you turn the lights OFF? mooer should put a battery in every unit and make th "li" version mean lights. having batteries is great. bravo mooer. use a bose1 as monitor, when power goes down my battery powered, always charging setup goes on. would have bought this immediateley in pandemic. hx stomp so hard to power. had some nice jams in industrial spaces...

[@leesbassment6393]

I agree 100%!! I bought the Preamp Live. Then they stopped supporting it. This new pedal looks great, but will they support it in six months?

[@fuckinliveinsin]

Mooer just support their products for 1 year, and then releases another one to replace it.... just buy if you want to support this business model 🙄

[@bigquen1]

I'll stick with the tonex and nam for my kemper profiler amp sounds.

[@kkpiemels3113]

Well. Its still a mooer product. It will have bugs. They try to improve it. And then they will abandon the product. Their products have a lot of potential. But the lack of customer support, updates, good working software will kill them one day I have the preamp live. Good unit. You cant use the built in boosts when using midi. The app crashes a lot. And the online tone hub just doesnt work.

[@jkalinna5607]

I can't wait until I bag my Korg Miku pedal

[@Mezurashii5]

I wonder what confused mess that would produce

[@timmyd759]

Another great video! How is your drummer doing? Is he able to play yet? 🤘🏼😎🍺

[@brrblack497]

More Mooer.

[@kerosj]

Multieffects with batteries and touchscreen, are they going to be as obsolete as the mobilphones when the battery got it's full cycles of charging etc, no one mentions the lifespans, although appreciate that Mooer gives other brands some competition. I'll probably never going to buy a multieffect with an internal rechargeable battery, regardless the brand.

[@pabloxs94]

what is the price?

[@pabloxs94]

nvm

[@Crowbar11115]

Hey Taylor, are you going to NAMM this year?

[@AdamTheGuitarist]

OK LISTEN This with Tonex Pedal (in fx loop and using the midi). Right?

[@mixa3]

Looks great. I won't buy another Mooer though. I had an GE300 Lite. No updates, no interface changes, terrible computer software. Helix is almost 10 years old and still reacive updates.

[@mtus647]

@@mixa3 yeah, I had a P1 from like 1 month after its release and it received like 1 update on the first 6 months and never again. They then released the P2 and completely buried the P1 like it never even existed

[@mixa3]

@@mtus647 It's just sucks. In GS1000's case it's even more important. The price point of 500 moneys is already on the big boys territory with Pod Go, Nano Cortex and Kemper Player. All of which are supported.

[@fuckinliveinsin]

yep, Mooer just releases products and then trash it for another one, just terrible business model on the long run, instead of doing the Line6 way, updating and updating the same hardware and with that maintaining prices and value. Higher ups at Mooer don't know sh1t. They are gonna do the same sh1t with this one, one year with updates and then: LoOk aT tHe nEw gE1500 oMG, bUy iT kNoW! they released their flagship model in 2019, and one update every 8 months or so, until 2022. they released the GE300Lite and trashing it right away with almost no updates. Then nothing, now they release the GE1000... f*ck them. never buying Mooer again

[@off6848]

I had a mooer multi fix back in 2020 and the thing was just weird man. It’s like if an AI tried to design a multi fx I’m almost convinced humans didn’t even make it

[@edneyhelenedossantos1875]

Ge300 lite is abandoned long time with broken driver and broken fx......so mooer sorry but never again.

[@OttoisOhio]

I wonder how Mooer stack up to Hotone and ToneX

[@luckyluc25]

How about a shootout between this and the Headrush Flex Prime? About the same price and do about the same thing.

[@RYAN-cj2fp]

Hey Taylor… What does it cost?? Did I miss that?

[@DugiDevetCarabolium]

So still no review of Line 6 POD Express Black for metal? WTF

[@queencrimson_]

I'm not "fingerprintphobic", but I don't understand why to use a glossy finish on this kind of products. It's impossible to keep clean and it gets disgusting in less than a minute. Also I don't get why do they put all those LEDs on this thing, especially when it's battery powered. It's not a gaming pc, it's a multy effect unit.

[@nicolasbeaudry6158]

Man it looks so complicated, a have a boss me90 and I scratch my head sometimes!!!😂😂😂😂

[@jhagan12804]

Question for you Tyler. I'm in the market for some good gear and i came across your channel. I a fan of your content already. I currently have a shecter diamond series guitar and a old crate 50w combo amp atm. Looking to drop around $2k on some gear. I'm looking at a set of lichtlaerm audio pedals, a new guitar, or a nice tube amp. I also am interested in your Obsidian pedal as well. Been playing guitar for over 15 years and just never invested much money into new gear. I've been writing music on and off since 2010 but life and ny career have got in the way. I am a good point in life to where I can finally dive back in and the industry has so much gear now its hard for me to decide. I can drop $2k now and more money later. I am looking for a dope metal setup. If possible let me know what you think. Thanks and keep on rocking!

[@LuLeBe]

Well you gotta figure out what you need. Is your guitar bad (bad fretwork, warped fretboard, uncomfortable shape, singlecoil when you want humbuckers?) because if not then the guitar doesn't matter at all, they all sound the same in the end when playing metal. If you want to go full analog (so pedals, amp, cabinet) just start out with a solid overdrive, an amp that you like (maybe something like the 5150 lunchbox amps?) and a good cabinet with the right speakers. Do your research on what tone you want (creambacks, V30s, greenbacks etc) and decide afterwards. If you don't want to research anything, get this for the modern metal tone: Any Humbucker guitar, any standard overdrive (SD1, TS9 etc), a 5150/6505 and a Mesa Boogie 4x12 oversized with V30 speakers. For recording mic it with an SM57. You'll have the tone of every big metal record form the past 10 years. But for anything more specific you need to figure out where that tone comes from. Which is really hard since you never see videos of 10 pedals with the same DI signal through the same signal chain, they'll always have a different mic or cab and so everything sounds different, but it's completely unclear where the difference comes from.

[@metalheadblues]

This probably won't do well on a dark stage , probably more suited for home use

[@jimsimmons2674]

What if the Battery dies or will not charge anymore in 5 years or less,is it still worth buying the Battery powered one?I would not take a chance,i would rather the one with the Power Supply!

[@mtus647]

@@jimsimmons2674 I mean, they will die. It's the downside to any battery powered device I'm guessing it would not be that hard to get them replaced, but it's definitely a concern for the long run

[@rimaakihiro1498]

1 minute gang 💪🏻

[@doctoribanez]

How much? Can i just download other peoples amps? I have nothing to capture 😂. I have a pod go and a katana

[@zPandemonius96]

I literally bought a tonex one to pair with my pod go YESTERDAY before you released the Frfr vid, and now THIS comes out, WHY WHY WHYYYYY

[@DavidAnthonyFlores]

I would be very happy with tonex products. Their capture is very very good.

[@zPandemonius96]

@@DavidAnthonyFlores It arrives tomorrow, can't wait

[@DavidAnthonyFlores]

@zPandemonius96 highly recommend you check out some Amaglam Captures. They're the best that are captured, in my opinion. But there are others that do a great job too.

[@KiltedTupiniquin]

Can't you return it?

[@fuckinliveinsin]

mooer always forget about their products and updates are almost non existent so be happy you made the right choice, IK Multimedia and Line6 always update their products. Look at the Helix! released in 2015 and it's still supported, now that's a good customer service

[@tiobizzo]

Mooer gears are excelent, the big and imense problem is that they ABANDON their customers... I love my ge300 sold by them and youtubers as "kemper killer" or "helix killer" but it has no updates since 2022 👎🏻👎🏻👎🏻

[@fuckinliveinsin]

they never fixed even the looper in the GE300, 30 minutes! but just one track! WTF? and it doesn't even work right. the pitch shifter to downtune is HORRIBLE, like even a cheap VST can do better than that. I can go on and on

[@bryanhamrick304]

I don't wanna be THAT guy, but you used the wrong link to the Mooer website

[@TIZ1629]

Waste of $$

[@pontiacpower421]

Mooer is trash. Had a ge300 it bricked. Had a preamp live. Literally caught in fire. I would t buy another anything from them. Its all Trash!