Loving your work bro. I'm currently building a 3.0 running Sidewinder 3 and 6500kv motor. 45t spur 41t pinion yes I said that right. I'm flying right now running 2s.
@rthbrry Жыл бұрын
Excellent! Great info, very helpful
@markmathews5117 Жыл бұрын
Verry cool build .
@KurtsRCs3 жыл бұрын
Nice runs, This is what i use for my hex and some loc tite because it does make the threads shorter but if you use the loc tite it will hold the wheel nut on. Traxxas Ford GT 4-Tec 2.0 (83056-4) Upgrade Parts Aluminum Hex Adapters 9mm Thick - 4Pc Set
@eastonbourdeau16313 жыл бұрын
hey man if your still looking for the extended hex type thing it might be worth a shot picking up some traxxas 2wd front hexxes they fit the shaft and are longer than stalk might be worth a shot
@mikelowrey93592 жыл бұрын
Not trying to be mr knowitall lol but making sure your tires are balanced is a big part of stability. I also recommend a more aerodynamic body and making sure the front of car is lower than the rear. Front of mine is 1/4in off the ground, rear is about an 1/8 higher. And I make sure all my tires are balanced before making a speed run. You can also buy/make suspension lockers for the front to keep it from rising up when you get on the throttle. Makes a huge difference
@lynnbattista7872 жыл бұрын
If u buy the 45mm foam wheels and on a foam tire truer you cut off about 7mm of the inside of the wheel you will get your wider stance without even needing the hex extensions. Exacta knife with #11 blade works just take ur time and cut for only 3 seconds at a time so you don t catch fire. Also makes sure the wheel spins the proper way so the the blade is trailing the wheel as it turns. Also put the grey traxxas hex adapter on off the front of a rustler 2nd or the stampede 2nd since it’s wider, but the nut still has room on the stock axel.
@modelaircraft6576 Жыл бұрын
Nice setup bro I’m thinking of picking up one of these cars from traxxas
@fangrc34043 жыл бұрын
Awesome run....
@philthekeys53672 жыл бұрын
Wow man nice . But wondering y there ain’t a wheelie bar on your 4-tec. I have one on mine . And a aluminum chassis. I don’t fly or flip off the road . Also your mod 1 right . We have the same esc. Except I have a posideon motor. Have you tried using the castle link with your computer.?
@GoKaioken2 жыл бұрын
Yeah I use the castle link with my pc to set everything up. The wheelie bar I didn’t think about.
@bigboyaaronsrcs6332 жыл бұрын
I just drilled out the hex,s to fit 15mm widners no issues
@MarcusHicksK.O.C3 жыл бұрын
Nice Passes & Good Info
@itzzgraham Жыл бұрын
Having some trouble trying to get my 2.0 to go straight even at low speeds, took the Servo saver off turned on the car and 0 out Tsm, the wheels look pretty straight however when I turn it doesn’t look like the servo goes all the way back into the same position, I don’t know what is causing this but it’s frustrating
@GoKaioken Жыл бұрын
Maybe try an upgraded servo? I recommend Raz shiffrin perfect pass servo.
@itzzgraham Жыл бұрын
@@GoKaioken purchasing the hot racing steering bell crank, there is a small crack where the servo horn goes into the part that steers the wheels, hoping that is what is throwing the car off ever so slightly to the right or left, I’ve tried multiple servo horn locations on the servo with the Tsm 0 out and still can’t get it correct, bought the hot racing metal servo saver as well, maybe the servo is going too that would explain why it doesn’t pull the wheels back to center all the way, however when I take the servo out, it steers both ways perfectly fine, even when I put a little pressure on the servo saver while turning it to imitate being connected to the servo horn and bell crank, super weird
@GoKaioken Жыл бұрын
Good luck!
@itzzgraham Жыл бұрын
@@GoKaioken thanks man 😎
@cowboyross2 жыл бұрын
Nice pass bro 👍🏾.
@GoKaioken2 жыл бұрын
Thank you!
@andrewap772 жыл бұрын
Great Job, but that car has a lot of plastic parts that can’t hold up to those high speed crashes, but I feel you, cause I’m chasing that 100mph with my 4tec
@GoKaioken2 жыл бұрын
Check out the rest of the series. We make a couple changes.
@steelhoyt16083 жыл бұрын
I never had good runs with the rc6gs transmitter. Could not for the life of me put down 1 solid pass. I switched to the stock traxxas tsm and instantly ran amazing and picked up 18mph
@GoKaioken3 жыл бұрын
Different experiences for different folks for sure.
@walledrodeo81262 жыл бұрын
Oh m my
@stilldabest15973 жыл бұрын
Please tell me how to fix that drive shaft problem I have the same thing going on for me on the same car
@glennjthompson3323 жыл бұрын
Got to get the Corvette to lose weight, in the middle, always get an RC scale to weigh balance and options to figure it out, that was almost a good run. (Grade B-)🏗️🤔☕👍
@kevinflanders3273 жыл бұрын
Nice speed, but would more weight keep it from popping up?
@GoKaioken3 жыл бұрын
For sure
@TheHousemaster90 Жыл бұрын
Fährt der ab Werk so schnell ?
@gabrielpichardo14922 жыл бұрын
Wow the carnage was real!! What an awesome little machine though
@walledrodeo81262 жыл бұрын
What setup u have I see mamba x what’s motor
@keekay_cg32c7.r23 жыл бұрын
1515 might be a little too heavy 😅 I think a 1415 with either mmx or mmx 8s on a good 4s battery combination should get you alot more speed I think the idea you should try with the 4tec is get it to draw more amps. I'll give you this hint, run a parallel combination
@GoKaioken3 жыл бұрын
I’ve been going through a couple options and have a few things I want to test - then I may jump to your suggestion
@keekay_cg32c7.r23 жыл бұрын
@@GoKaioken give it try later see how it goes always remember lower voltage higher amperage, higher voltage less amps that goes for any car
@mydadsrcchannel9343 жыл бұрын
Whats your PB for the 4tec?
@omarvalenzuela3042 жыл бұрын
verygood you video bat a need numbers parts for change un my car i from mexico and how you buy this parts
@Zxcew2 жыл бұрын
Can I ask what are those green plugs
@GoKaioken2 жыл бұрын
They are the castle 6 mm or 6.5 mm plugs.
@fitfiz Жыл бұрын
The hardest speed run is 10th scale,(except wltoys), whoever can make it straight is legend, it always went to the right, sometime it spun out.. BTW good built bro👍👍👍👏 and check out my cheap built 6s 10th scale redcat.. 👍 I've got 80mph PB but end up crash😅
@themanthelegend7048 Жыл бұрын
Instead of braiding thise wires you should just cut to fit and solder. Not only is shorter wire better but you'll save a few grams by cutting that copper off.
@GoKaioken Жыл бұрын
Yeah this was in my early years of RC and I didn’t have the experience to solder. I definitely shouldn’t have braided these lol
@robertruiz5417 Жыл бұрын
Go to a large football field for speed runs
@aristojose57543 жыл бұрын
does someone put foams if you send them the stock rims?? maybe also subscribed
@GoKaioken3 жыл бұрын
Yeah a company called Gone Bananas
@aristojose57543 жыл бұрын
@@GoKaioken that's the one. Heard it from Earl Moorehead nice job on the car. I'm about to do the same project but thinking the maxx power system since I have it on hand
@Jesse-x5y7 ай бұрын
This car is not heavy and big enough to do speed runs keep it brushed or brushless 2s and have fun
@GoKaioken7 ай бұрын
Do whatever you want to do regardless of opinion. It’s a hobby.
@MyRcGoSlow Жыл бұрын
Make a how to fix lol for us noobs
@zgarner9611 ай бұрын
Car not meant for speed runs. Get an XO1 for that.
@GoKaioken11 ай бұрын
It’s a hobby. You can use any car you want for any purpose. I got this car to 128mph. Seems okay to me.
@SoldierBoy3064 Жыл бұрын
expensive crash... nice video tho
@thomasafezolis45982 жыл бұрын
Just get a yokomo gyro
@robertruiz5417 Жыл бұрын
Dis like the whole 4 tec 3.o size of wheels and body size many walking away for this product as a professional rc techican I see other brands flying off our. selves. faster