IBC totes for firewood- how much do they hold? - #4

Understanding how much wood fits in and IBC tote

[@FirewoodattheFurnace]

Great explanation. So many people are confused on this subject. I’ve found that some of my customers are shocked when I pull up with a cord of wood. They can’t believe how much wood it is. I’m pretty sure people think a face cord is a full cord. Really like how you dump the wood in the trailer. If I’m ever able to get a tractor, this is how I’ll be doing it! Your channel is doing great my friend. I knew it would after the first video

[@oldguyfirewood]

Thanks for your comments Brad and thanks for your support! The tractor is a must for me. After stacking in the tote (right off the splitter) I don’t touch the wood again. Eliminating touches makes it much more efficient. To be honest if I had to stack by hand and then load the trailer by hand I would really be limited in how much wood I could do.

[@DudeRanchDIY]

Great explanation Dick! I typically stack just a bit higher than the rails so as to allow adequate overlap for my lids, but I also squeeze in a row in between the two main faces since there’s a gap between the 16 inch pieces I found that that basically gets me the extra wood needed For a full face cord in the smaller 275 gallon totes!

[@billobermeyer660]

Great explanation on what could be a confusing subject. Thanks for taking the time to re stack the face cord to prove your point. Well done!

[@oldguyfirewood]

Thanks for the comments Bill!

[@jandblawncare8570]

Great video and hard to argue the facts (measurements). I use IBC totes as well and always went 2 rows above the rim thanks to Adam's video a while back.

[@oldguyfirewood]

Thanks so much for watching. IBC totes are the most efficient way I’ve found to minimize “touches” in the whole firewood process. I did another video on IBC totes from start to finish (dumping them into my trailer). If you haven’t seen that one you might enjoy it.

[@TwinCityFirewood]

This is the best video I’ve seen on this subject. Thanks for taking the time and effort to do it. I use ibc totes also. I have almost 70 now. They work great. I’ve found a few other uses for them as well. Thanks again.

[@oldguyfirewood]

Thanks for the kind words Wirey! My goal is to get to 100 totes. That will handle all the wood I can process through my small operation. I have over 30 now and I’m picking 17 more up today. I’ve found a new source so hopefully I can get to 100 by this summer. Thanks for watching and please subscribe if you haven’t already!

[@TwinCityFirewood]

@@oldguyfirewood I hit the subscribe button on your first video. Haha. Your operation is very similar to mine. I’m small time and just started this past summer. I enjoy it so far & I’m constantly looking for ways to improve.

[@digger0429]

Thank you. I learn every day and I'm 70 yrs. Old l am new to your channel saw you on Paul Bunyan with Chris

[@oldguyfirewood]

Hey digger… welcome! I really appreciate you watching and commenting. Paul Bunyan was a great time. If you ever have a chance to go, do it. Thanks for subscribing. Us older guys need to stick together 👍😅

[@digger0429]

I cut firewood for myself, since the 70's just do it slower

[@outsideinmichigan]

I don’t use IBC totes but I enjoyed your explanation of how much Firewood fits into one.

[@oldguyfirewood]

Thanks for the comments! Use of IBC totes for firewood has really become popular. I thought it would be of interest to many.

[@HometownAcres]

Love the number crunching! Excellent video.

[@oldguyfirewood]

Thanks Adam! I love your channel… one of the things I like is your empirical approach to things. I relate when you start talking numbers and throw a graph or spreadsheet up there to explain the results “mathematically”. I wish I was closer to your location. I’d love to visit, do some “young guy/old guy sharing” and maybe collaborate on a video. Thanks for watching and “keep moving”!

[@woodsman123]

Thank you for this ! Love your approach and taking the time to share!

[@oldguyfirewood]

Thanks so much for watching and for the kind words. I appreciate your support!

[@tennesseesawmillguy1590]

Great topic. We have around 20 totes we use around the sawmill. They are handy!

[@oldguyfirewood]

Thanks TSG! They are getting hard to come by at a decent price. I’ve got about 50 and would like to get 50 more. That’s all the firewood I could produce in a year so it would be perfect.

[@tomriblett2979]

i use both the 275 and 300 totes Glad to see another honest man.

[@oldguyfirewood]

Thanks for watching Tom. I’m using a conveyor now and fill my totes loose. I’ve emptied and stacked them so I know how much is in a loose thrown tote. I need to do another video on loose thrown!

[@Andrew_From_NB]

Hi Rick, thanks for all this good info an explanation. Very well done! Very informative and much appreciated! Take care! Andrew from NB, Canada :)

[@oldguyfirewood]

As always, thank you for watching Andrew. I was afraid I got into too much detail (to the point of being boring). As it turned out it’s one of my most viewed videos!

[@Andrew_From_NB]

@@oldguyfirewood not at all dick, all those extra details really helped with relaying your overall thoughts for this video 💯👍. I appreciated it for sure! Cheers :)

[@nelsonridgefarm]

Great demonstration Dick, thanks so much! -Brad

[@oldguyfirewood]

Thanks for the comment Brad. I noticed we have the same bundler! I messed up in my bundling video and kept saying John’s Welding was in Pennsylvania… I caught my mistake when I saw your video but it was too late to correct at that point. Hope you’re having a great day!

[@texassews535]

Your dog was helping with the wood in the background! So cute.

[@oldguyfirewood]

Hey buddy thanks for watching! That’s Clifford ha… after every splitting session I have to pick all the pieces up he’s dragged into the yard 😅

[@darwinbenedict2874]

A good explanation! Not being from a wood area never knew about face cords let a lone a cord of wood. THANKS

[@oldguyfirewood]

Thanks for watching Darwin. I hope you subscribed and have watched some of my earlier videos. Yes, there is a lot of confusion about firewood quantity measurements. I’m glad if this was informative.

[@dragonspicks]

Great video my friend. I’m definitely going to share this with my newbie firewood friend. I’m sure he use this valuable idea in his life

[@oldguyfirewood]

Thanks for the comments! Share and subscribe… greatly appreciated!!

[@davidedwards3734]

Great explanation of the difference in the wood stacked level and above in a 275 gl tote. Have a Safe Day

[@oldguyfirewood]

Thanks Dave! I thought I may have beat the subject to death lol. Appreciate the comments and glad you liked it.

[@davidedwards3734]

@@oldguyfirewood which tractor do you have?? Cant find a video of how you attach the totes to your forks for dumping

[@oldguyfirewood]

@@davidedwards3734 I have the kubota L3400. If I could figure out how to attach a picture with this reply I could show you how it’s attached. Basically 2 shortened heavy duty ratchet straps, one on each side from the tote frame to the fork frame. If you look closely in the first few frames you can make it out in the video

[@rock0122]

Just came over from Outdoors with the Morgan's . nice explanation about the Cords of Wood. have Subscribed. Watching from over the Pond (UK)

[@oldguyfirewood]

Thanks for watching! I’m honored to have an “international” audience! I love watching the Morgan’s. I hope I can develop some content that is of interest to like minded folks. I really appreciate your comment.

[@frankbetz9202]

I'm new to your channel very informative you went to a lot of work to show people how to figure a cord out great job i love your channel keep up the good work .thanks from eugene oregon

[@oldguyfirewood]

Thanks Frank! I appreciate your support.

[@FlatCreekOutdoors]

Good info. I've yet to find a good cheap source for those totes, but I'll keep looking. Hope to get some. I like how you used them as ends for your pallet stacks.

[@oldguyfirewood]

Thanks for the comments! You’re right, it’s getting hard to find ICB totes. I’m picking 17 up tomorrow for $20 each. That will give me over 50. I’d like to have 100.

[@tennesseesawmillguy1590]

I’m in East Tn. I can get them from work. Just holler if you’re gonna be down this way.

[@OutsidewithScheib]

Nice job OG

[@oldguyfirewood]

Thanks Scheib! Compliments from one of the original KZbin firewood legends means a lot to me… cheers 🍺🍺🍺!

[@jeffriedel2587]

Good info . I am also using IBC totes And Pallet bags from Northern Woodsman here in Wisconsin. Portable dry wood is my goal - 1 Touch wood from my Wolferidge splitter - season to my dump trailer - delivered . Thanks Again - Good luck with your channel

[@oldguyfirewood]

Thanks Jeff! You’re correct, eliminating touches is the key. I also have a Wolfe Ridge… maybe you saw it in my first video. Hope you subscribed!

[@scottlmartin4429]

Thanks for taking the time to prove your point. Also, congrats on 200+ sub in a short time.

[@oldguyfirewood]

Thanks Grandpa! I feel like I’ve hit a bit of a wall with the number of subs. I’m hoping new videos will give it a bump.

[@anthonylamura8600]

Beautiful piece of property you have...

[@oldguyfirewood]

Thanks for the comments and thanks for watching. It’s my “relaxation” spot!

[@rogermiller4912]

Now I finally know how much wood is in an ibc tote. Thanks

[@oldguyfirewood]

I’m filling my totes off a conveyor now, loose not stacked. Im going to have to do another video so I know how much they hold if thrown in loose! Thanks for watching watching Roger.

[@frederickburns1739]

I wish I had your energy! As a old guy by the time I do what you just did it would be time for a nap 😴!!!

[@oldguyfirewood]

Lol Fred! After I did that video I think I DID take a nap haha. I wish I could go like I used too… frustrating. Thanks so much for your comments.

[@woodsmanallnaturalbbqwoods]

Thank you very much for sharing this information!

[@oldguyfirewood]

Thanks for watching. Hope you subscribed to my channel!

[@woodsmanallnaturalbbqwoods]

@@oldguyfirewood I did. I'm 50 years old and starting to sell firewood and BBQ wood. Firewood by the bundle perhaps as I live in Louisiana and it's hot most of the year. It's all an experiment for me.

[@DanielAtkinsFirewood]

Thanks for the explanation.. Like a few others I dont do totes.. Heck my yard is not even set up the look at and say hey there is X many cords there.. It gets measured once loaded up.

[@oldguyfirewood]

Thanks for the comments Daniel! I apologize for the slow reply. I appreciate what you’re saying. In my case it just minimizes the manual handling after the splitting stage.

[@DanielAtkinsFirewood]

@@oldguyfirewood : hey no worries.. We all get busy and sometimes life takes over and we arw just along for the ride..😁👍

[@andrewsamanthamadison3320]

Firewood @ the furnace sent me. Great vids! Subscribed.

[@oldguyfirewood]

Thanks so much Andrew & Samantha! Thanks for watching. Brad is a good guy. I hope I can provide videos as good as his.

[@hardworkingmanoutdoors]

Love using the Ibc totes! I just scored 25 more totes.

[@oldguyfirewood]

Thanks for watching and thanks for subscribing! I love the totes. They eliminate a lot of touches. It’s getting harder to find them for a decent price. I just lucked out on 17 for free but it’s an hour and a half away. I’m picking them up on Monday.

[@mountainmanlogging2573]

Awesome i was wondering bout the totes thanks for sharing

[@oldguyfirewood]

Thanks for the comments mountain man! Hope you enjoy my other videos and hope you subscribe!!

[@leefrederickson5526]

Thanks for the info.

[@oldguyfirewood]

Thanks for watching Lee… hope you have subscribed and watched my other videos. I really appreciate it.

[@chrisartman6168]

Thanks for another great video! I’ve been stacking on pallets. This year I started a system like Chris from in the wood yard & Brad from firewood at the forage. I don’t have as much sunlight as him, so I just stack in two rows. I take the supports for my uprights right off of one of the pallets. I did get my hands on a few totes. I will fill them next to try them at drying.

[@oldguyfirewood]

Thanks for the comments Chris! Totes are getting hard to find. I’ve got around 50 now but would like to have 100. I love the fact that once I split into them I don’t have to handle the wood by hand again.

[@inthebackyardwithdel438]

Very good info . I have to use pallets for now . I have an unlimited supply of pallets. I would like to get a tractor sometime . Then I could get the totes . Very good video . Have a great week . Del

[@oldguyfirewood]

Thanks for watching Del! You’re right, a forklift is needed to make use of totes efficient. At my age I couldn’t physically do it if I had to load everything by hand. I’m blessed to have the tractor. Hope you have a great week!

[@inthebackyardwithdel438]

I totally understand . I have arthritis so bad I have to take medicine twice a day . I’ve had one knee replaced and am going to have the other one replaced as soon as we can get my wife over her breast cancer . That’s why in my videos I stumble around a lot . But it’s all good !! Have a good one .

[@cjjack-qk9qp]

great content thank you for taking the time to explane

[@oldguyfirewood]

Thanks for the comments and thanks for watching!

[@bryanlafleur2419]

I did! Thanks for this information.

[@oldguyfirewood]

Thanks for watching Bryan!

[@a.l.l.firewood8883]

Nice job, take care

[@oldguyfirewood]

Thanks for the comment!

[@travisdoesfirewood]

Thank you Sir!

[@oldguyfirewood]

Thank you so much for watching. I hope you are subscribed!

[@KNLFirewood]

Great job Dick! I’m interested to know how you secured the IBC to the mast of the tractor when you dumped it. 200 subs in the first month! Way to go buddy! Keep it up!

[@oldguyfirewood]

Thanks Mike! I use a heavy ratchet strap on each side. I cut the strap short and only use it for that purpose. I’ll take a close up picture and sent it to you. What’s the best way to community with you… email?

[@redpoole9323]

The 275s hold a Facecord just fine. 2 rows of wood front and back and Stack the center void with smaller pcs. About 4 inches over the top rail. It wil fill a 4x8 wood rack every time. I do it several times a week.

[@oldguyfirewood]

Thanks for watching. You’re correct. As I mentioned in the video it will hold a face cord if you don’t fill the void and stack about 10” above the top.

[@redpoole9323]

@oldguyfirewood yes sir. Buttt still yet. Some people won't believe ya until u actually show them. I was just confirming everything you were says. Keep on splitting and stay safe

[@hookahb1901]

I appreciate that back breaker, and mental gymnastics to figure that out..I was wondering because a fella down the road is selling wood in those totes...His are not packed and stacked, but just thrown in, and short of the top, so i was trying to figure it out..Thanks Much

[@oldguyfirewood]

Thanks for watching. Hope you subscribed! It’s a good video to provide you the knowledge to know what your buying.

[@EverythingElliott]

Great Video! How do the IBC totes hold up with the repetitive dumping? Do you see any weld breaking on the supports that you’re hooking the strap to?

[@oldguyfirewood]

I have several that I have dumped more than 10 times and no signs of anything breaking.

[@firewoodathome]

By having the equipment to dump into trailer, it's so much easier. I unfortunately do not, started last year with IBCs. Now its more effective using pallets, for me.

[@oldguyfirewood]

Thanks for the comments Bill. You hit the nail on the head… if you have to load your truck or trailer by hand it is much more efficient to work off of pallets. I’m blessed to have the forklift and it saves me a lot of physical touches. At my age I really don’t think I could do it without the tractor.

[@bfoutdooradventures]

Good demonstration of a full face cord in an IBC tote. How high above the larger style size IBC tote do you think you would need to stack to get a face cord in it?

[@oldguyfirewood]

In the 330 gallon totes you can fit a full face cord if you stack it to the top of the tote. Mike Morgan did a video on that about a year ago. Thanks for watching B&F.

[@hawaiidogs9277]

Ty sir

[@oldguyfirewood]

Thanks for watching!

[@harryhall1929]

Good job! New subscriber here.

[@oldguyfirewood]

Hi Harry. Thanks so much for watching, commenting, and subscribing! I really appreciate your support.

[@fricknjeep]

hi there i cut and stack my totes different then everyone else so it does hold a full face cord . and cut my firewood at 18 so it fits tight in the tote also .i even put the lids on different the other people do . i don't sell fire wood just cut a lot so the 18 does not matter john

[@oldguyfirewood]

Thanks for the comments frickinjeep! I hadn’t thought about the difference the 18” cuts would make. I understand what you are saying and agree with you. Since my customers needs vary, (smaller woodstove, fireplace, fire pit, etc), the standard 16” seems to work best. Thanks for watching!

[@fricknjeep]

@@oldguyfirewood hi again the 18 doesn't mean anything to me because i don't sell wood but if i was to sell it 16 is the only way to cut it . john

[@jimmyv1283]

thank you am just about to use wood for heating an was wondering how much would a tote hold

[@oldguyfirewood]

Thanks for watching Jimmy. I hope you subscribed to my channel. View my earlier videos for additional firewood related information.

[@craigwilson9560]

Great explanation. I always told people local the 275 level wasn't a face cord and you proved it. Great video. Where do you get your IBC totes? I get mine from farmers. What do you use to hold the tote on the forks? Nicely done!

[@oldguyfirewood]

Thanks Craig! I’ve bought most of my totes on Facebook marketplace. I have about 35 I acquired a couple years ago. I have an average of about $10/tote in those. Prices I’m seeing lately are in the 50-60 dollar range. I actually made a call to a mulch production company today and I’m picking up 17 more tomorrow at $20 each. I always assumed they had someone else who was getting their totes… all it took was a phone call! I hope to build a relationship with them so I can get about 50 more over time. I hold the totes on with a short heavy duty ratchet strap on each side from the tote frame to the fork frame. If you look closely in the video you can see it.

[@vesslewiththepesstle]

At the risk of starting a whole different discussion, an IBC holds 1000 litres, so it holds 1 cubic metre but I don't stack mine I just throw it in so I'm a bit shy of a 1 M2, thanks for the video from another old guy (on the other side of the world).

[@oldguyfirewood]

Thanks for watching Peter. Thousands of miles may separate us, but our interests are obviously very close!

[@Mainelywork]

🤘

[@oldguyfirewood]

Thanks for watching Jeff. Hope you’re subscribed! I have another video about using IBC totes also. You may be interested. I really appreciate you watching.

[@Mainelywork]

I am subscribed 👍

[@dalemciver7118]

First Time Watch Like The Video And Love The Flag In The Back Ground

[@oldguyfirewood]

Thanks Dale! I love my flag…. Hope you subscribed!

[@dalemciver7118]

@@oldguyfirewood I Did Subscribed

[@leonardryan8723]

Glad your thinking in use your tractor for dump your fire wood save on your back . Have a good day think safety around firewood put SAFETY FIRST .

[@oldguyfirewood]

Always safety first Leonard. Thanks for watching… hope you subscribed!

[@danahasson2892]

The IBC totes make sense if you get them cheap enough. Do you wrap a chain around the tote too prevent it from sliding off.?

[@oldguyfirewood]

Thanks for watching Dana! You’re right about cost. My threshold is $20. I just found an unlimited source for that amount. I would like about 50 more and I will accumulate them over time. They normally sell for $50+ in my area, so I may buy 20 at a time, sell 10 quickly at $40 each, and end up with the remaining 10 for free (other than my time and minimal transportation cost). The totes are held on with a short ratchet strap on each side. Look closely at the video and you can see it. I’ve had a lot of questions about that, so I may do a separate video.

[@smity7096]

Good deal. What size tractor do you have?

[@oldguyfirewood]

Thanks for the comment Keith! I have a compact tractor… Kubota L3400. The lift capacity is around 1100 lbs. it serves me well but if I was buying a tractor today for my operation I would be looking for 1800-2000 lb lift.

[@waterboy5164]

Awesome video!! How much wood does a tote275 and 330 hold if it isn’t stacked? Do you think 2 unstacked would be a faceford?

[@oldguyfirewood]

I actually did a test once but I didn’t video it. Need to do that! Anyway, I lost about 28% when I took a loose full tote, dumped it and the re-stacked it. Based on that, about 1 2/3 loose stacked 275’s would be a face cord.

[@waterboy5164]

@@oldguyfirewood thanks for responding so quickly yeah that would be a good video I don’t like to stack wood and if I can just fill and drop that would be great, I see videos of the bags but wasn’t certain on how much they hold.

[@bobrumpf2576]

you are from rural upstate ny? i'm in the hudson valley and it's firewood time ...was trying to figure a way to work with the ibc totes...and checked your video -great information....i need a tractor ...i'm just stacking on some shelter logic rack's and a few homemade racks for now i only burn about 5-6 cords a year but i'm getting old and my back doesn't like it...i subscribed to your channel

[@oldguyfirewood]

Hi Bob. Thanks for watching and subscribing! Yes, I grew up in Port Jervis and moved south with my job when I was 29. The IBC totes work great for me but they are getting hard to find at a decent price. I can totally relate to the connection between aging and back pain! Thanks again!!

[@bobrumpf2576]

@@oldguyfirewood I was in port jervis yesterday,it was raining most of the day so i only bucked up a few logs..... i was thinking about some sort of gantry with a grapple hook to help lift the big pieces onto the splitter,i thought i had seen a few video's on you tube of some nice setup's like that

[@paullandry4031]

How do you attach to forks to prevent the tope from falling with the wood when dumping ?

[@oldguyfirewood]

Hi Paul. Thanks for watching. I did a video of the entire tote process from the raw tote to dumping them in the trailer. It was my video #8. Here’s a link kzbin.info/www/bejne/nJLIgI1vaNiSja8. Watch that video for a complete explanation.

[@paullandry4031]

Thank you so much for explaining it so well. I enjoy watching your videos. From an old guy to another « yes keep moving » I’m 83 and still learning » Paul from Ottawa Canada.

[@steinbierz]

Great video and love the math. How do you know when your wood is dry enough to deliver for sale?

[@oldguyfirewood]

Thanks for watching Larry. I’ve gotten to the point where I have a pretty good idea based on species and how long it has been split. I also sample with a moisture meter. 20% or less is ready to go.

[@steinbierz]

@@oldguyfirewood Thanks for the reply! A few years back I got into turning bowls on a lathe (twice turned as well as dried bowl blanks) and keep reading about moisture meters but can’t ever seem to find consistent reviews on what to buy and what is really accurate.

[@steinbierz]

@@oldguyfirewood Thanks. I am a woodworker and lathe turner and keep looking at moisture meters but haven’t pulled the trigger yet…need to get back to that research.

[@amandadavis9726]

I wonder how much would it take for a quarter cord to be stacked in the ibc totes. People around here sale and purchase by the 1/4 cords and not face cord (1/3). Looks like I could just sell “1/4 cords” with just a full tote.

[@oldguyfirewood]

Hi Amanda. Thanks for watching. I've found a quarter cord stacked will be about 8"-10" below the top of a 275 gallon tote. I you throw them loose in a 275 and round it up over the top it will also be 1/4.

[@amandadavis9726]

@@oldguyfirewood you’re welcome. Thank you for the info. I will definitely put that in my notes for future reference.

[@amandadavis9726]

Hey Dick, it’s been a while since we spoke. I’ve crunched some numbers, and this is what I’ve come up with. A 1/4 cord is two rows stacked even to the top and a face cord 15” higher in the 275 gallon totes. Here is my formula of how it got it. I used it to calculate the total volume. Hopes this helps. 1/4 cord 46” L x 40” H 3.8’ L x 3.3’ H = 12.5 x 1.3 x 2 rows = 32.6 cu ft 1/3 cord 46” L x 55” H 3.8’ Lx 4.5’ H= 17.1 x 1.3 x 2 rows = 44.4 cu ft

[@philliphall4506]

Thanks, Dick get job on the video!!!

[@oldguyfirewood]

Thanks Phillip. I hope it made folks think.

[@johnwinslow4503]

A face cord is 42 cu. ft. 1/3rd of 4x4x8 =128 cf.

[@oldguyfirewood]

Hi John. That’s about right. Actually a face cord is 42.7 cu. Ft. The stack I showed in the video was 8’x4’x1.33’ which equals 42.6 cubic ft. Thanks for watching!

[@woodsmanallnaturalbbqwoods]

Just curious, what are you guys paying for used IBC totes in your area?

[@oldguyfirewood]

Here in NC I’m seeing prices around $50. I’ve paid $40, $20, and gotten several for free. I think I figured at one point that I have under $10/tote for all that I have.

[@charliechmelar9788]

My question is, what do you do with the poly liner from the tote?

[@oldguyfirewood]

Good question Charlie. I cut the side out of the tote and use it as a top cover for the full totes. Look in the background of my video and you will see what I mean. The excess goes to the local waste management company for disposal.

[@charliechmelar9788]

Local recycler won't take it

[@oldguyfirewood]

@@charliechmelar9788 not a problem here. Where are you located?

[@foxholefarm16]

How much does a face cord weigh in ibc totes?

[@oldguyfirewood]

Thanks for watching! Of course it depends on the wood species and how dry it is, but generally a face cord of mixed hardwood will be around 1300-1500 lbs. My tractor will only lift about 1200 so I put less than a face cord in each tote.

[@RoseBud-fk4qg]

Wood furnace is work but much better heat we bought 400 gallons of oil this year $2100 if we just burned oil furnace 6 weeks . We have tractors loaders ,splitter, and many chain saws free wood so each year we don't burn oil we buy a used tractor or a new chain saw or generator or something we need 😉

[@oldguyfirewood]

That sounds like a very sound plan. Thanks for watching.

[@jeanvaljohn3921]

Now What is the price per pound? If they order one tote or two or three, does the price remain the same ?

[@oldguyfirewood]

Thanks for the question Jean. Firewood in the United States is typically sold by volume, not by weight. The common measure is the “cord” which is 128 cubic feet of wood, or a “face cord”which is just under 43 cubic feet of wood. I use the totes to store the wood and then empty the appropriate amount out of the tote based on the volume of wood the customer orders. For example, a cord of wood is about just under 4 full totes. A face cord is about 1 and 1/4 totes. Typically the more wood a customer purchases, the lower the price is per cubic foot.

[@davidignacio3009]

Don't you ever wish that IBC Tote manufacturers would come up with IBC container that could comfortably fit a full one-third of a face cord. That would make life easier for the firewood guys, convenient for the clients and the manufacturer will have a ready market.

[@oldguyfirewood]

Thanks for the comment David! The 330 gallon fits 1/3 cord perfectly, but the tote manufacturer doesn’t care one bit about their use for firewood storage ha!

[@luciaconk]

Where does one get an IBC Tote?

[@oldguyfirewood]

Thanks for watching. Facebook marketplace has them listed all the time. The cost is getting too high though.

[@donchristie420]

After emptying tote, maybe toss back in and see how much less will fit in it

[@oldguyfirewood]

Thanks for watching and commenting Don. I've actually done that and found loose thrown will be about 30% less. That probably would have been good to do in that video... good suggestion.

[@gregprince2523]

So 3 totes make a full cord or darn near it.Here's what I'd like to see..... We know 1 stacked tote is a face cord..... How about a tossed in 275 gallon tote... not stacked.... how much less is the tossed in tote compared to the stacked tote?.... I know when we stacked our 8 foot bed up we always had more than just tossing it in the bed..

[@oldguyfirewood]

Somehow I missed your comment Greg… sorry! I have actually tossed in a tote full, taken it out, and then stacked it back in. You actually loose about 1/3 when you throw in loose.

[@daveed2812]

In my opinion 3 face cords is more than a cord, a cord is 128 cubic feet of stacked wood and you will never fit 3 face cords into a 128 cubic ft. 16+16+16 is 48 but unless you compress the wood it just will not fit. The face cord is a 2D measurement does not account for depth properly. Good for the consumer not so good for the firewood seller!!

[@oldguyfirewood]

Thanks for watching and thanks for the comments! The most common definition of a face cord (and the one I use in my video} assumes 16” pieces of wood stacked 4’ high and 8’ long. This is a 3 dimensional measurement, 8’x4’x1.3333’ which equals 42.7 cubic feet (a 3 dimensional measurement). Three of those stacks equals 3x42.7 which equals 128.1 cubic feet… 1 cord. Another way to think of it is to stack the 3 face cords end to end. You would have a stack of wood 24’ long, 4’ high, and 1.333’ deep. 24x4x1.333 equals 128 cubic feet or one cord.

[@daveed2812]

@@oldguyfirewood and if you are off by 1/2 inch and your avg is 16.5in you will be out about 3% per cord, if your avg is 17 you will be out 6%. You end up loosing double because you loose volume and you paid to produce the lost volume. If the market is generous and you get decent $$$ for your wood this is absorbed in the mix. But if you are in tighter markets it makes or breaks you!

[@mr.redneck2715]

All that talk and numbers, a cord is 128 ft. Nuff said! How many cubic feet are in an IBC??????

[@oldguyfirewood]

Thanks for watching and thanks for commenting Mr. Redneck! Haha I get your point but a lot of folks like the detailed math. A 275 gallon tote cage holds about 36 cubic feet if stacked level with 16” pieces.

[@woodsman123]

I noticed that the IBC tote at the beginning of the video only has 4 sections..is that yet another size of tote? Also, I am able to get a few more pieces stacked in between the rows on my IBC totes..I need to check if I have the larger ones because yours seem to be pretty packed with 2 rows of 16” pieces….

[@NeighborlyHomestead]

It drives me nuts when people say, "well they hold a face cord". No they don't. Measure it and do the math.

[@oldguyfirewood]

I feel the same way! Thanks for watching.

[@NeighborlyHomestead]

@@oldguyfirewood I like the content. Keep it up!

[@MoneypitHomestead]

Great video, and I have subscribed to your channel! I really enjoyed how you broke down the amount of wood you can put in the IBC totes! I use the totes to bring firewood to the house, and I love using them. Donald @ #moneypithomestead

[@oldguyfirewood]

Thanks so much for subscribing Donald! The IBC totes have been a game changer for me.

[@outdoorswithlarryrobin]

Dick, shame on you! Woodhounds like to chuck and stack! Math takes the fun out it😂 Takes Care my Friend🚜🪵👍🏼🇺🇸

[@oldguyfirewood]

Hey Larry. Your comment made me smile… you’re right! Problem is, this Woodhound’s major chuck and stack days are behind me haha. As frustrating as it is, I have to constantly look for ways to make it easy enough for me to continue. Have a great day Larry!

[@outdoorswithlarryrobin]

@@oldguyfirewood Dick, mine also, in fact thats mostly what our channel is about work smarter not harder😂 Take Care my Friend and be Safe 🚜🪵👍🏼🇺🇸