Have you tried to FAFO with your KS0 Ultra yet? What results are you getting?!
@NizmoMiner2 ай бұрын
@@GreaterGoodMining what’s FAFO?
@GreaterGoodMining2 ай бұрын
@@NizmoMiner lol it mean "F*ck around and find out"
@NizmoMiner2 ай бұрын
@@GreaterGoodMining lmfao 😂😂😂😂
@GreaterGoodMining2 ай бұрын
@@NizmoMiner hehehe 😀
@LukewarmMiner2 ай бұрын
you know for a fact I did the FAFO day 1 lmao. dont remove the hash boards hahaha
@RainBitcoinsАй бұрын
Changing the paste helped mine out big time...I find they keep around 400-425 gh/s more steadily. They dont swing up and down as much. But they do run at the same temps, just seems more stable.
@OzSkyking1522 ай бұрын
Thanks for doing the testing on the ultra. I was going to mod mine but it looks like I don't need to do it yet.
@GreaterGoodMining2 ай бұрын
Yeah i think you're better off skipping mods for now. The one I left stock with fans at 40% seems to be the happiest of them all! lol
@domg66142 ай бұрын
Really nice comparison, thanks for the greater good work :)
@GreaterGoodMining2 ай бұрын
HaHa thanks! I have to admit I was really hoping one of them would stand out and get batter hashrate. Oh well, perhaps another FAFO session is in order
@jkohutiak2 ай бұрын
Thanks! My ks0 ultras will be here soon i hope there are OC's available
@GreaterGoodMining2 ай бұрын
@@jkohutiak sounds like the overclocks are a bit tricky this time around. As soon as they are available, I'll be doing FAFO sessions and videos on them!
@RainBitcoinsАй бұрын
OC now available
@chris_mining2 ай бұрын
Thanks for the awesome video, I think I’ll leave mine alone for now.
@GreaterGoodMining2 ай бұрын
@christopherrandle3085 yeah for now they seem happiest stock
@sadiesometimes11412 ай бұрын
Informative and entertaining 🙂💯
@GreaterGoodMining2 ай бұрын
@sadiesometimes1141 thanks for watching 👀 😀
@RandomMiner2 ай бұрын
🎉🎉Hooray for FAFO!
@GreaterGoodMining2 ай бұрын
FIRST TO ENJOY THE FAFO SESSION!!! lol
@greegp74002 ай бұрын
Iceriver need heat no idea why , I can cool him 43c 35c and hashrate is 340gh after turne of fan spin to heat whole box to 57c 44c hashrate go up 409gh average 395gh after few hours , ridiculous need heat to work faster , heat = degradation electronic 😂😂 my second device will arrive but better buy 2x ka box pro 1.6th it works way stability way better
@GreaterGoodMining2 ай бұрын
The heat seems to allow more efficiency in the chips. Heated metal allows electrons to flow more freely with less resistance. We miners don't like the heat, but unfortunately it is a part of mining! :] I do wish these things werent so picky though!!
@JazekFTW2 ай бұрын
I have used copper shims + kapton tape + nail polish to protect everything but I had to put fans to 0% or the temps go lower than 60ºC and hashrate goes down to 320-340
@GreaterGoodMining2 ай бұрын
Yeah these things are picky and like warmer temps for sure
@motleygarage4202 ай бұрын
Epic video
@GreaterGoodMining2 ай бұрын
Thanks! I wish one of them would have stood out as the winner but it was worth a shot and I wanted to share the results with everyone :]
@jkohutiak2 ай бұрын
Going to need to give updates several days / a week after
@GreaterGoodMining2 ай бұрын
I can do that too. I think running them overnight and checking the 3 hour average at the pool was a pretty good start. It really didn't seem to make a difference unfortunately
@NizmoMiner2 ай бұрын
Hey boss , can you run copper heat sink machine fans at 25-30 percent. You should exceed 400mhs and do a chip temp report ?
@GreaterGoodMining2 ай бұрын
I've already done that in previous videos. So far it seems like my Ultras are happier with no fan on top and the internal fans set to 50%. When I have them like that I usually get over 400gh
@RaptorMining2 ай бұрын
SUPER MECHAAA Kychuuu 🤣
@GreaterGoodMining2 ай бұрын
Suupppaa mecha kaaaiju! Lolol
@RaptorMining2 ай бұрын
🤣🤣🤣
@watahyahknow2 ай бұрын
maibe try watercooling , should equalize the temps and you might be able to keep it closer to optimal temperature
@GreaterGoodMining2 ай бұрын
I'm hearing that the new firmware should keep the temps in the range it needs to be in. I'll be trying out the firmware soon to verify.
@Stantheman-f3r2 ай бұрын
Iceriver
@GreaterGoodMining2 ай бұрын
Iceriver ineed!
@amostwanted2 ай бұрын
Did the Farmer Firmware works on this ultra?
@GreaterGoodMining2 ай бұрын
Not yet
@diongalbreath94412 ай бұрын
The ftc said the sticker remove does not void warranty for united states people
@GreaterGoodMining2 ай бұрын
Oh nice, I'll keep FAFO'ING then!
@TechManTY.Ай бұрын
@@GreaterGoodMiningchina don't listen lol. Until they sell in country with a store they can ignore it
@GreaterGoodMiningАй бұрын
@TechManTY. oh I gotcha. I completely ignore warranty stickers anyway lol 😆 😂
@k1e1v1i1nАй бұрын
OK so I am one of the unlucky ones my ultra is no longer responding (no gui) I can still see it on the network anyone know how to flash it via usb ?
@GreaterGoodMiningАй бұрын
It probably just switched IP Addresses. Use the monitor tool and hit the ip report button to see if it changed.set static IP
@k1e1v1i1nАй бұрын
@@GreaterGoodMining nope it kept the ip but I can no taccess the gui and the monitoring tool can see it but cant connect. i spoke with tswift and he said it can be fixed for a price and gave me a link to a dev but lol my telegram has some kind of ban on it where i cant message new people. I dont even use it so no idea how i got this issue lol
@GreaterGoodMiningАй бұрын
@k1e1v1i1n ohh I gotcha, so you tired to overclock it and it bricked because you tried to reset it while the init file was loaded into it without loading up the reset file? I can't help you unfortunately, you'll have e to go through whatever contact he gave you
@k1e1v1i1nАй бұрын
@@GreaterGoodMining back up and running 100 kas for the fix
@TheMoviebuff78Ай бұрын
Which size copper mods are the correct ones?
@GreaterGoodMiningАй бұрын
The link to the exact ones are in the description of the video 😉
@crypto4402 ай бұрын
Without setting the fan the chips stay at 75°
@GreaterGoodMining2 ай бұрын
Yeah these things definitely prefer to run hot. The auto fan settings didn't seem to work as well for me so I just went ahead and set them to 40 for this testing. I also wanted the fan to lock in at a consistent rate for all 3 machines for testing purposes. Because if the fans are set to auto it kind of defeats the purpose of trying out the usb fan etc
@LoopingFinder2 ай бұрын
Hello, Where can you find temperature monitoring software?
@GreaterGoodMining2 ай бұрын
In my Discord there is a section where you can download it
@LoopingFinder2 ай бұрын
@@GreaterGoodMining ok thank you, but i have a kso ultra
@GreaterGoodMining2 ай бұрын
@@LoopingFinder yes but you can still see 4 of the chips if you click on the regular ks0 in the monitoring took like I showed in my video
@LoopingFinder2 ай бұрын
@@GreaterGoodMining Ok thanks ;)
@LoopingFinder2 ай бұрын
@@GreaterGoodMining ok thanks but I can't find the link in discord
@danielelninoerrante82032 ай бұрын
hi bro... Can I still win that giveaway?
@GreaterGoodMining2 ай бұрын
Hello! Did you see I messaged you back about the KS0 Pro in Mining Stackers video? I will ship to Miami sir, congrats on winning! Do you have Discord or Twitter where we can DM eachother? I have a link so you could join my Discord in the description of this video. Join my Discord and send me a DM if you can!
@Stantheman-f3r2 ай бұрын
When winer
@GreaterGoodMining2 ай бұрын
@Stantheman-jv5kv winer? Stan my friend, I'm not sure what you mean lol
@oxbcat2 ай бұрын
Can you please check your discord invite link? The one embedded above seems to have expired.