Overview, setup and configuration details for this very nice new MIDI interface and patchbay. Manufacturers site: www.iconnectivi... I bought mine from Thomann: www.thomann.de...
Пікірлер: 121
@BoStarWizard4 жыл бұрын
Instead of Spending $350 on a patch bay You should have Hire a Landscaper to Clean up Your Back Yard. You should have never shown that in the video Or maybe Invest in Curtains or something. Or maybe Spend less time tidy up the Studio and Work in the Back Yard...
@VRMS_VRMS_VRMS4 жыл бұрын
Oh my god. This is my favourite comment ever and you are my favourite real human wormbaby. Live long and live weird, Bo Star.
@hybridwaveform31254 жыл бұрын
Useless comment for a useful video
@BoStarWizard4 жыл бұрын
@@hybridwaveform3125 I couldn't help it, It was such a Big Distraction, I could not get it out of My head. =/
@jefft43034 жыл бұрын
I share your concerns, but I simply can't bring myself to load additional woe upon victims of Hurricane Gargantua. (The Red Eye of Jupiter, a Category 9 SPECTRE.) Haven't these poor folks suffered enough?
@malikgordon92123 жыл бұрын
You probably dont care but if you are stoned like me atm you can watch all the new movies and series on instaflixxer. Have been streaming with my brother lately :)
@iConnectivitySupport7 жыл бұрын
Great review of out mio10 product. We greatly appreciate the kind words and the in depth information and insights. I can tell you that you've been well heard. We've actually sent your video to everyone in our company so that we can better design and create software and hardware going forward. If you get any feedback and questions please feel free to contact us! We love hearing from our clients and want to build the best products we can for the best price as you've mentioned in your video. Thanks So Much.
@VRMS_VRMS_VRMS7 жыл бұрын
No problem - just trying to be as comprehensive as I can. Happy to provide more feedback etc. if you need it.
@iConnectivitySupport7 жыл бұрын
Please send over whatever information you'd like to support@conenctivity.com
@johnn.reissiger95235 жыл бұрын
@@iConnectivitySupport I just got the mio10 for my birthday and the preset configuration is lost tried everything. Videos, contacting the company etc... I cannot restore my routing or configuration. If iConnectivity can revamp its iconfig software and incorporate it in auracle instead of separate programs, auracle can restore iconfig to factory default. I have wasted time to restore this without assistance and I've got a show to do with this. You must do a step by step instructions video for just restoring the main mio10 settings or find in iconfig the routing settings rest default settings. Seriously myself and others who bought the mio10 or other products from iconnectiviy. I'm not getting results nothing is or has worked to resolve my issue. Please answer the phone's and verbally tell all your customers what to do in this situation. It's an awesome unit but the settings and restore and iconfig portion is a considerable waste of time if you're a novice or pro with it. Please review, revise the mio10 manual and get a step by step video out. Put it on a video DVD and KZbin and write this in the new users/owner manual.... Email and call me back jnreissiger@gmail.com 470-208-9320...
@iConnectivitySupport5 жыл бұрын
@@johnn.reissiger9523how to do a factory reset in auracle and iconfig. iconnectivity.supportbee.com/53/117/8768 Also feel free to send in a support ticket at iconnectivity.com/supportticket
@toddcarpenter42335 жыл бұрын
iConnectivity Support its been 2 years now and i was wondering if the routing issues brought up towards the end if this review been addressed/fixed? thanks
@StefanoPettinelli7 жыл бұрын
Really amazing review! This is nearly a video-manual :D Great job, well done!
@kieroneditor5 жыл бұрын
Superb tutorial/review, very well done, and I especially like the VNV Nation screensaver haha... my Mio10 is arriving tomorrow, to a mixture of excited anticipation and dread, because like you I have a bunch of old and new devices that require many different flavours of MIDI channel and functionality, and as much as I am looking forward to hooking it all up, I have a feeling I'll be obsessively switching configurations and parameters for weeks to get into a comfortable preset in the Mio software. As a nineties MIDI operator like yourself, I cannot imagine such a device existing back then, both in terms of how happier I would have been not wasting so much time with dodgy 5-pin cabling and tiresome pages of LCD menu settings, and also how it would have changed the entire music industry if people like Jean Michel-Jarre and Martin Hannett and Trevor Horn had such a wonderous piece of hardware. I'll try to keep in touch with regard to my own successes and failures - great to see iConnectivity Support being so eager to ensure their products are working well, so unlike a lot of companies I shan't name who don't even bother updating firmware for their expensive legacy interface devices (*cough* M-Audio *cough*) Anyway brilliant video, many thanks for your time & effort to make this!! :)
@KevinStCroix3 жыл бұрын
I don't give a shart what his backyard looks like, he just crushed this damn review and walk-through. iConnectivity should being paying to have his yard landscaped because they dropped the ball on presenting how to set this device up.
@KevinStCroix3 жыл бұрын
In the studio 8:02 Setup software 10:54
@beecee3307 жыл бұрын
This review / demo of the software is exactly what i was looking for. Thank you for putting the time into this. One more unit sold ;)
@salvadordila71777 жыл бұрын
I love your garden!
@JeffMarraccini4 жыл бұрын
Thank you so much! Your review clinched my strategy.
@FantasticF1133 жыл бұрын
I know I'm late to the party (and this piece of gear has been discontinued) but I wanted to let you know this is a great video. Well done VRMS
@calikali24202 жыл бұрын
Excellent review!!! Thank You for all the detail!!!
@jamesdmorgan4 жыл бұрын
Yo great video. Been a while (it's bruces mate from a long time ago) . Cool to see your setup. Going to pick up an xl. Spot on video. Really clear and informative x
@SpoonerUK7 жыл бұрын
Great review bro. I wish this was online when I picked mine up last year. Also to note that iConnectivity Support are top notch. :)
@iConnectivitySupport7 жыл бұрын
Thank You good sir!
@bobcatt22946 жыл бұрын
I am impressed that iConnectivity is responding to these comments - I can not remember this ever happening.
@SlaserX2 жыл бұрын
Fantastic video, definitely picking one up now
@teacworms6 жыл бұрын
Great video! I wish I had watched this months ago.
@chrismartin66902 жыл бұрын
Hi, great vid and explanation…I have one got it when they first came, I now have the auracle config software… it is still the best I believe
@RetropUk5 жыл бұрын
Thanks so much for this. I'm pretty much sold after watching. 👍 I've been looking for something like this but haven't wanted to pay the money for the motu. In my scenario I've currently got all my hardware hooked up to my MPC but that makes it a pain to integrate the computer usefully so I have to choose between the two ways of working. I'm hoping I'll be able to set this up with a couple of configs so I can switch between a preset that routes everything from the mpc to the hardware as it currently works but also allows me to use the computer & ipads as additional instruments and then another to allow me two way communication to all my synths and drum machines from the DAW without having to spend half an hour re-cabling.
@jefft43034 жыл бұрын
Good video. Coupla things. Your master template, (20:43) seems to have two ports named for each USB controller, but Max Ports per USB Device is still set to one. Also, when naming devices, I find it less confusing if I include both the Mio-10 port type and number, AND the name I wish to assign to it. Example, a DX-7 on DIN port 3 gets the name "D3 DX7." An Akai MPK-261 on USB port 2 gets the name "U2 MPK 261." This is especially useful when inside a given PC or DAW. A string of 16 devicenames only, makes it hard to know which LEDs on the front panel should or should not be lit at any given time, and missing assignments by one port then LOOK pretty much ok, delaying successful troubleshooting. These problems go away when the devicename includes both the port number and device type, as described above.
@RonWellsJS6 жыл бұрын
Good job fella, I bought this based on this video and it's by miles the best device of it's type (used to have M-Audio 8X8 & MOTU Express)
@bobcatt22946 жыл бұрын
RonWells, would you still, after 5 months, maintain the same rating for this device?
@bisibela5 жыл бұрын
thank you!!! excellent review. I wish i had looked this up sooner:) spent a few hours learning from the manual ( this can be better written especially giving more examples of in the midi routing page with respect to midi modules, vs synths vs midi controllers as well as in the midi filtering page. Also listing the din jacks separately on two usb for computer connection as well as separately was also a bit confusing, especially for novices. Illustrating each concepts with examples would greatly help in improving the manual. you did a very good job in explaining things. the way i got around the usb hosts midi channel was to directly program the synths to receive midi on 1 channel from the daw. On my korg kronos i left to receive on all channels for sequencer to play in 16 channels is needed. My moog one, subsequent 37, deepmind and Model D receive on predetermined channels set on the synths.
@gurpaalbains32175 жыл бұрын
thanks for putting the time into making this, super useful info!
@daveb60215 жыл бұрын
Excellent review, very clear and watchable. You should keep doing them ;)
@tekis07 жыл бұрын
Great review! I think I need this for an upcoming project.
@LeadingMotive5 жыл бұрын
Great Video, thank you! I saw on iconnectivity's website that the default MIDI routing can be disabled: ""Run our Auracle software and click on the Disconnect All button in the MIDI routing page. This leaves all of your MIDI devices connected to your DAW only".
@jacintonegro3 жыл бұрын
Great Review, Clean your Yard Bro, it looks like Hurricane Katrina just happened backthere.
@VRMS_VRMS_VRMS3 жыл бұрын
Given how much people seem to enjoy observing it, I think I may have to start the Untidy Yard Channel...
@RicardoDiLago5 жыл бұрын
Great review. Helpful and clearly told.
@RicardoDiLago5 жыл бұрын
a note: the iConfig did not work through a usb hub, once i connected the MIO10 to a free usb port the iConfig worked.
@wotzefak19836 жыл бұрын
Hey, i just got my mio10 yesterday and i think i might have figured out how to configure the feature you needed... i am using a advance61 as a master keybord and have the ability to select the 16 midi-channels like you wanted to do... What i did on the OUTPUT filters on each synth port: enable all filters on the channels, the device should not listen to... so for the d-05 for example only the 5th "stack" is disabled (white) and so on... as all of my devices are configured (on the device) for port 1, i also did a remap on each OUTPUT midi port where the synths are connected with ENABLING (dark color) the reroute from port 5 to 1 (again the d-05 example) These 2 settings for each synth OUTPUT side... (filter + remap) solved the issue to me.... the funny thing is: as the virus is multitimbral, i did this for many ports of the virus so i can select the different virus tracks from the master keyboard as well an use it as "different synths" very easily... The bad thing about this kind of "workaround" is: only 16 channels!!! thats it.... But you could expand this idea with a second master keyboard routing to a complete new 16 channels on 16 diferent instruments - so if all 16 "instruments" from the first 16 port stack do not communicate to the 2nd. masterkeyboard, they'll not get any trigger from it... in fact i can do it with my master-keyboard alone because it has a second virtual port and i can select Channels A1-16 and also B1-16 - so i have 32 channels to use with only one master-keyboard... i am using: Virus TI2 polar, Virus TI2 Rack, D-05, Digitakt and getting Deepmind12 and Behringer Model D soon... Controllers are Akai Advance61, Beatstep Pro, Akai MPD232 and Keystep is ordered already...
@wotzefak19836 жыл бұрын
i just wanted to add why i wrote OUTPUT in big letters: on the port-filters and channel-remap tabs, in the left upper corner the little select box is automativly set to INPUT... which means the INPUT PORT on the mio side.... but the communication TO the synth is on the mio OUTPUT side.... so this little box-entrry has to be changed to OUTPUT in order to geht the correct interface for these settings!
@42tehfloor6 жыл бұрын
Does the Advance work in the host port of the mio? I haven't been able to find that out anywhere.
@wotzefak19836 жыл бұрын
the physical host ports (1 in the front and 1 in the back) are for computer-hosts only... (the USB-B Ports) The anvance can be used via classical midi (with power supply on the anvance) or on the regular midi port (i am using a usb hub and have connected the anvance, mpd232 and beatstep pro) - the manual is really acurate regarding hw-setup... the software-setup was lots of trial and error for me :)
@42tehfloor6 жыл бұрын
Great! Thanks for the info. I just ordered a mio4.
@42tehfloor6 жыл бұрын
I got my mio and so far am able to use the Advance as a generic MIDI device but are you able to access the VIP software from the keyboard when it's connected to the usb host port on the mio? I haven't been able to figure out how to do that yet.
@bisynthesis7 жыл бұрын
Thank you! Great video!
@palpatony20827 жыл бұрын
Thank you for this review, it's really good. With your video you've answered a lot of questions I had about the mio10. I'm still not sure what to think about the user interface when it comes to the midi port routing, especially when I want to cascade two mio10 devices together. Additionally to the missing hardware panic button, the USB ports are not ground lifted, from what I've read. However, I guess I will give the mio10 a try...
@bobcatt22946 жыл бұрын
Pal, do you have any advice or feedback now after almost a year?
@SpoonerUK7 жыл бұрын
That's the issue that I had with Cubase. Cubase wouldn't detect MIDI DIN1 and I thought that I had a fault. You don't get any error messages with Cubase. I had the config tool open while Cubase was running. Config the device and save it, then close the config app BEFORE opening your DAW!
@VRMS_VRMS_VRMS7 жыл бұрын
Yah, it doesnt much help when the OS doesn't have a decent flag for 'device in use' when it comes to MIDI.
@teddym28086 жыл бұрын
apparently this doesn't support midi time stamping and the midi drift is different on every port, it gets much worse at port 8.. I am sticking with 2x motu microlite instead to get my 10 midi i/o. Would have been nice to only need one usb port but it is what it is.
@rayk_19705 жыл бұрын
Great and very usefull review, thx Bro! But one more and maybe a noob question: For example your arturia is connected through a USB hub and this usb hub is connected to the "usb port type A" on the Mio10, right? So this way it recognizes the keystations automaticaly? Will this do as well with the Nov-Peak, Rol. Tr8-S and to all USB connectable devices that i hook up to the same usb hub that is connected to the Mio10? I'm using a FocusRite Scarlett 18i20 that is hooked up on my Intel Core i7-8700K 5.2 Ghz with Ableton live 10 and also connected by the DIN to the MIO-10. My MIO-10 detects a "FocusRite AE Peak(Port 1)" only, So i realy don't understand. Because i use a TP-Link powerd 7ports usb hub(3.0-2.0 usb supported) and its straight connected to the MIO-10 and on my USB hub is the Novation Peak and a Roland Tr8-s but it isn't shown in the MIO-10, just a "FocusRite AE Peak(Port 1)" I don't understand why its not in the list. Maybe you know why not, or anybody knows why? Thx
@iansunderland1175 жыл бұрын
Fab review thank you. My question is based around further expansion. I have an old Edirol UM880 which stopped working properly with my Macbook when El Capitan came out hence buying the MIO10. The UM880 is a class compliant device so I wondered if it should work with a hook up from the (standard flat) USB port on the back of the MIO into the (square) USB B in on the UM880. I'm guessing I should then set the maximum number of ports to 8 in the software to be able to "see" the 8x8 ports for routing?
@David-cg7ms7 жыл бұрын
Very nice review ! Thanks
@AlistairMaxwell772 жыл бұрын
great video . whats jitter like?
@mybestfriendjacob Жыл бұрын
I'm a little confused and hopefully you can clear this up.... This allows you to go from FL Studio MIDI out 1 into the mio10... which then goes from the output into all your synths.... & in FL Studio you can control all of your synths by giving each MIDI out inside FL Studio a different number?
@VRMS_VRMS_VRMS Жыл бұрын
Actually, the mio appears as a load of separate midi devices in FL but you can also send what's going to on port to other ports, it's very flexible.
@montxsuz3 жыл бұрын
Helpful video! Thanks for that. Although the Mio10 is now discontinued, it put me on to the MioXL. I need a MIDI interface upgrade and was about to get the Motu Express XT (in-spite of the reported ongoing SYSEX problems - because what else is still out there?) - until I discovered your video. Two things that got my attention immediately: USB input and Ethernet. I have synth gear from pre-Midi (CV), MIDI, USB eras, and even 3.5mm to Midi DIN (adapter). Being able to connect most through one hub will be a big advantage. How reliable has your iConnectivity gear (hardware and software) been? Question I have at the moment is what is the difference between AVB and RTP? Eg MOTU and PreSonus uses AVB networking (I have a MOTU AVB switch and Audio Interfaces). Is the iConnectivity compatible with the AVB Switch, or will I have to plug it into a normal ethernet switch? I cannot find an answer through google, but I assume the latter. Will any conflicts result? I assume the computer can handle the different protocols through different host software. I also use Steinberg (Cubase) and other software on Windows 10. Also I assume the mioXL can be used in stand-alone mode without a computer - something I need ocassionally to connect my legacy hardware synths together without a PC.
@MrBoxxed6 жыл бұрын
Excellent review Do you know if updated have been made to the software as yet?
@wotzefak19836 жыл бұрын
VNV NATION Wallpaper
@amberdean12635 жыл бұрын
That's what I thought!
@mellindsay66635 жыл бұрын
Hey there great review on the mio10! My quick questions. 1) I have a few midi synth modules that I want just pull sounds into my DAW for, so can I just use a single midi cable on my DIN ports? 2) for the USB hub can it handle a midi controller keyboard as long as it is class compliant? 3) Do you have a video on working with virtual synth connections (I’d like to use my Native Instruments Komplete library in this chain as well)? Thanks for any thoughts you can share. Keep the great vids coming sir. -Mel...
@jefft43037 жыл бұрын
If I understand your main issue with the Mio-10, it is that a device, plugged into say, DIN port 3, has all port, channel, and event mapping set...once. One channel map, for all its port maps...yes? If so, I think problem resolution enters a numbers game. Example...right now, the config file preset contains 16 channel remap datapoints for each of 56 MIDI ports, or 896 total datapoints related to channel mapping. If a single device can be channel mapped 56 different times, depending on what it's connected TO...then you'd have 56 channel maps, containing 16 data points each, per device, times 56 devices, or 50,000 plus data points, for a single variable, channel mapping. Then, applying event filters etc, you'd be up into billion (or more) variable territory very quickly. Not just a case of having to store them, but each switch would then have to be set by the user as well. Not saying it's impossible, but... Here at E4 Multimedia, we have a 30 port ADAT multiplex, the Z-Systems Optipatch Plus. It connects 11 audio interfaces, which are hosted by 6 PCs. (Motu PCI(e) 424 cards with multiple breakout boxes per card.) After slugging thru a mind bending system wide setup, involving 19.5 million variables, we added one more device...and the variable count shot up to 5 billion plus. This shut us down for months as far as progress went. We didn't get a handle on it until we seperated the routing task into three discrete levels. Room to room, we have 4 blocks of routings, those which terminate in (record to) room one, are under block 1, terminate in room 2, block 2 etc. Each of these is a simple 15 inputs, routed to any of 15 outputs, 225 variables. We ignore the 8 audio channels riding on each of the 225 ADAT pipes, at this level. Drilling down to the mid-complexity level, we have the DSP mixer config presets for each interface. PC 1 lives in room 1, and only needs DSP configs for ADAT configs routed there. (Not the whole story, but illustrative.) Finally, at the lowest level, we have DAW templates, to take advantage of various high level ADAT routings, when married with individual DSP routings at the middle interface level. This allows us to build ultra complex, 5 billion variable, routings, at a modular level, and this is the only way I see to rationally approach your objective. Put simply...a saved file that contains only channel maps, in a folder full of numerous other channel mappings. Another, seperate file folder, full of port mapping files. This way, you'd be assembling fundamental building blocks, over months or years, one manageable chunk at a time. The Mio-10 interface software would have to be modified to load not just one massive config preset, but instead, several smaller ones at different levels. Port map number 003, combined with channel map(s) 0017, 0043 and 0056. The biggest problem with larger multiplexes (arrays), isn't setting the few switches you actually need, instead, it is UN setting the ones you don't. A modular approach resolves as much of this tedium...as we're able to...so far. Finally...a simple request. My Mio-10 arrives two days from now. I can see great utility, I think, in two simple additional buttons per page. "Enable all" and "Disable all". In fact, my first task, on Mio-10 arrival, will be from lessons learned from the ADAT octapus. Set everything to off, (by and large) and save that preset as the default starting point for all my future config builds.
@VRMS_VRMS_VRMS7 жыл бұрын
The complexity you describe in this instance is only a problem if you're trying to brute-force the entire mapping matrix. That's horribly inefficient, and almost certainly unnecessary; I don't know whether there's any special tricks (FPGA, parallel stuff) being done in the MIDI processing on this device to reduce latency, but if it's a straight up traditional serial processing algorithm, I'd expect there's an input buffer (holding MIDI messages tagged with source port), an output buffer, and an algorithm inbetween that writes on or more output messages based on input+config. If you want to guarantee the latency of this process then yes, you fix the size of the config complexity. But that doesn't mean that it has to store every possible combination; a fixed size list of connections (Input port, Input channel, Output port, Output channel) would equally achieve guaranteed latency and I'm sure it could be more than big enough than anyone would ever need to use (famous last words of course, but MIDI data is small and slow.)
@jefft43037 жыл бұрын
I'm with you, but from your video, it seemed you wanted much more granularity than just In port/channel and Out port/channel. I thought you were asking for mapping and filtering on each of those, independantly. That's where the variables can start to pile up. And like you note, you'd be at the mercy of whatever default config they choose. (All DINs feeding all DINs.) The "Diable All" and "Enable All" buttons I mentioned is precisely to avoid the brute force necessity of having to flip every switch. I like your "not broke, don't fix it" approach too. Leave thruput unchanged, regarding mapping and filtering, unless it needs changed.
@soundmagus4 жыл бұрын
Sadly there seems still to be no way to route a devices midi channels seperatley to each of the ins and outputs. So, for instance on my Squarp Pyramid i cant route midi ch1 to DIN10 INPUT ch1 then Pyramid Ch1 tyo DIN10 INPUT Ch2 - its a huge failing imo.
@aliencall7 жыл бұрын
dreaming midi hardware i hope The bugfix and more feature come Soon
@bobcatt22946 жыл бұрын
After 10 months, nothing I see has been upgraded.
@nilsonbarbaro2 жыл бұрын
My VoodooLab Ground Control Pro Foot Controller stops responding, sending MIDI messages after 5 minutes of use, i don't know why this happens every time ! Do you think this MIDI Box could solve this problem of MIDI messages errors, weak signals and latency ?
@VRMS_VRMS_VRMS2 жыл бұрын
Sounds like the issue is in the controller itself; I'd suggest hoking it up to a computer and using something like MIDI-OX (www.midiox.com/) to check what's actually coming out of it..
@IDASoCal7 жыл бұрын
Hello. Great review! I use MOTU Timepieces and an Iconnectivity MIDI4+ together. I'm curious about what your MOTU issues were that caused you to need to move away from the platform altogether.
@VRMS_VRMS_VRMS7 жыл бұрын
Main issue I had was using two MTP AV units networked, realtime events do not pass correctly between the two units, and I got tired of having to use an old mac to manage them (they were pre-usb units.)
@IDASoCal7 жыл бұрын
Ahh...ok. Yes. I was thinking that was the case. The serial connections have come to the end, unless networked to a USB unit. I do still use an old MTP II as a thru box. I trigger an old G4 and a few other MIDI pieces through it. At any rate, thanks again for the MIO review. Always good to see studios utilizing out-of-the-box MIDI gear along with software.
@ryanpowermusic6 жыл бұрын
Thank you for a great in depth review of this product. How are you feeling about it and the software a year later? Is it playing nice with Windows 10 updates? Thanks for your time.
@VRMS_VRMS_VRMS6 жыл бұрын
It's still working great with windows 10, the software updates have been really good - it still has the same limitations but the new setup software they've put together for simpler configurations is really tidy.
@ryanpowermusic6 жыл бұрын
+gishengarms Great. Thanks for getting back to me.
@Arperture7 жыл бұрын
Can this do lightning to USB and run MIDI from an iPad into the box?
@SnipSnapChap7 жыл бұрын
ChasingDogma did you get an answer to this question?
@Arperture7 жыл бұрын
According to the specs on the iConnectivity site it is iOS compatible. So I suspect it does.
@thorstenebers28627 жыл бұрын
is RTPMIDI better then via usb , ie. less jitter ?
@deepteral17675 жыл бұрын
Great review! Do you know if the software is been improved since 2017?
@VRMS_VRMS_VRMS5 жыл бұрын
There are a bunch of fixes to the software I've shown - however iConnectivity also have an alternative setup system now as well, covering all their interface,, which is easier to use though has less in the way of detailed configurability (though I understand they will be extending it going forward)
@johnn.reissiger95235 жыл бұрын
I wish they had an iconfig reset if ya make an error as I did and I've had my mio10 since August 8th and as I finished all connections it ran as claimed but do make a video explaining how to fix the iconfig settings if everything was and is deselected you can reset it back to default in the iconfig program right now, this will be a major problem for new users and current users also. So please revise the manual for resetting the iconfig settings back to default as well add the iconfig reset defaults in auracle too this is required if you make a mistake routing information to and from devices. The reset function should also be in the auricle settings program and have all the settings backed on a USB drive. Figuring this out as a novice is not practical for anyone using any iconnectiviy unit. I'm contacting iconnectiviy Monday to see if I can resolve my mistake. Because my mio10 is blank and no instructions to read here, online at iconnectiviy.com anywhere is unexplainable. Be very careful what you route to and from any devices even if you do not know the iconfig program and it's preinstalled settings. This is what you get for not reading the default settings in the mio10 or other units main screens first six tabs and so forth. Recommend making some calls and changes to iconfig and reconfiguring iconfig into auracle so auracle can reset and resolve mistakes users make. Be careful. However make iconnectiviy aware of this.
@KiLLACAiN6 жыл бұрын
if you had say... 32 sound rck modules... would this be of good use? switching between 16 channels between 32 modules ? do i make sense? im using mpc software and max 16 midi channels.. and i plan on getting many more rack modules for sound as im almost at 16.. if i go over 16 would this make sense to get? i want to have a wall of racks 64 really..
@bobcatt22946 жыл бұрын
No response to an excellent question. I am awaiting the answer.
@gernot-reininger6 жыл бұрын
Hi. Thank you for the review. Can I use the interface in standalone mode? Thank you in advance. Kind regards, Gernot.
@bobcatt22946 жыл бұрын
Yet another great question. Can this device be used as a hardware only thru box?
@VRMS_VRMS_VRMS5 жыл бұрын
@@bobcatt2294 If you disconnect the USB, the routing still happens. So yes, Standalone is possible.
@christinewilliams68116 жыл бұрын
Did they ever add the granularity you were looking for with the routing?
@bobcatt22946 жыл бұрын
Hi Christine, unfortunately, this and several other comments with key questions have been left unanswered.
@VRMS_VRMS_VRMS5 жыл бұрын
@@bobcatt2294 It's a hard life eh.
@VRMS_VRMS_VRMS5 жыл бұрын
Not as of yet AFAIK; It would likely mean a modest redesign of the core routing so I can understand why it's unlikely to happen.
@EliahHoliday7 жыл бұрын
I also found it odd it wont update save a preset once modified, you have to remember the name of the preset and save it again. Also it's a little confusing as to what is an input and what is an output as far as routing. Have you tried connecting it to your computer via ethernet?
@VRMS_VRMS_VRMS7 жыл бұрын
Not tried the ethernet stuff yet, things have been busy! :)
@iConnectivitySupport7 жыл бұрын
This guy connects great via RTPMIDI unless your on OSX Sierra, to which hasn't released a public working RTPMIDI setup yet.
@iConnectivitySupport7 жыл бұрын
You can set multiple of them up together at the same time. You will definitely want to rename the ports do they don't come up eth1 eth1-1 eth 1-2, etc..
@richbalam60925 жыл бұрын
What’s the model name/number of the small Genelec monitors please? :-)
@VRMS_VRMS_VRMS5 жыл бұрын
Guh! Had to look it up seeing as I've since sold them... They are 2029B's, a variant of the 2029 with an AES/EBU input that were sold by Silicon Graphics with their high-end systems back in the day.
@bigdaddy43026 жыл бұрын
standalone?
@ericarseneau19047 жыл бұрын
Hi. Between this unit and a MOTU midi express xt , which is the best?
@VRMS_VRMS_VRMS7 жыл бұрын
I'd definitely go with this unit - the tech is much newer, the drivers and config are great and the company has shown a lot of willing to provide support.
@ericarseneau19047 жыл бұрын
Thanks for your help. I just ordered the MIDI4+. I think it suits my needs a little better and is a little cheaper than the mio10.
@chasethedust3 жыл бұрын
@@ericarseneau1904 still using the midi14+ ?. Im thinking of getting one for a host of usb synths and old midi synths linked to a daw/cubase
@ericarseneau19043 жыл бұрын
@@chasethedust I am still using it and it has never given me a bit of problem. It can be complicated to setup but can do anything as far as routing goes.
@vinhElementhouse6 жыл бұрын
You didn’t plug BMO in 😭
@VRMS_VRMS_VRMS5 жыл бұрын
BMO does it's own thing...
@DrSpungiform2 жыл бұрын
I came here for MIDI and Iconnectivity… I leave needing some closure on your garden? Wtf is going on out there?!