iPhone 4 (AT&T / GSM) Screen Replacement (PART 1) - iCracked.com

[@L3X-369]

This is the best tutorial! Long and HD! Thank you!

[@sailingdiscoverypassage]

Thanks for the reply! I took it apart again and got everything working again. It must have been a loose connection. Thanks again!

[@sailingdiscoverypassage]

Great Video! I followed it to the letter and it works great except the speakers buzz when I listen to music, etc. It's like something is shorting out somewhere and causing it to buzz and crackle. However, when I use the headphones they sound perfect. Any ideas how to fix this problem? Thanks in advance!

[@rhymenocerous0]

I noticed all the screws seemed to stick to the screwdrivers. Did you magnetize your screwdrivers or are they already magnetized?

[@billymaxwell12]

There is a black rubber band that fell off my motherboard when putting it back in, all it needs to do is wrap round the top of the motherboard to protect LCD ribbon cable rubbing, also the LCD ribbon cable was bent on my case which ive found is common for most cases just make sure it is flat when fixing it back together

[@LightTheNightAway]

is that antenna cable (the small one) the same or similar to the number 6 cable on a 3gs?

[@apdx33]

is there anywhere to get the flowchart without having to buy a kit. any i could maybe just print out?

[@mrpw1402]

Are your screwdrivers magnetized?

[@megapwn333]

can i download anywhere one of those sheets ure using with instructions ?

[@Thejustinennis]

Thank you so very much icracked.com your video is very useful and well demostrated thank you very muched.

[@iLikeToDrum1]

no where do you get good pry tools like that if i did that to my battery the tool would exlpode

[@bajo50]

i bought an iphone 4s from a guy who said it got wet. He had extra battery. I purchased a kit to work on it, but when i opened it there where 2 screws missing from the mother board on the left side of it and the little black clip under the battery connection is missing. Does it need the little blackclip under the battery connection to function? It looks like the 2 missing screws on the mother board wouldn't matter. Any help would be appreciated. Barry

[@Panda_performance_jlle]

My friend, first, thank you for the video, it was my savior, my home button was busted, but i accidentally cut the data flat cable on the lower left side of the iphone, so i bought a new one and i am installing, but when i fliped the iphone a little rubber with a red dot fell out and i dont know where is its location, can you help me?

[@dad061257]

does this work if the phone has been blocked at network cos i got this phone from a friend as he got a up grade from o2. would they of blocked it at network and when he got the new one...?

[@SychoAirsoftSquad]

WHERE CAN I DOWNLOAD THE INSTRUCTIONS PAPER, IN THE VIDEO???

[@MiamiWealthGroup]

great job I know now I will pay some one to do it .... to many steps.. thanks for video

[@rednevaleven]

what about the camera if I change my iphone from black to white? They say that there'll be a black ring on the picture if i use flash when i take picture.

[@HoRyDUB]

3:30 I need this paper! Where can i found it ???

[@TerryBadger]

Can you PLEASE HELP me? I took the i4 apart, replaced the power button, put it back together very carefully and now the touch part of the screen does not work. The screen is perfect visually but does not send I/O instructions to the phone at all.

[@mynameisjeaf]

my emf cover is silver and the 3 center screws cant come off for nothing i so pissed theres no way those come off ? i try unscrewing it but it doesnt even turn. the screw nxt to the camera the one below it and the one across from it

[@Dakiidbangsz]

After changing my screen everything works fine exept safari the pages wont load , apps that use internet such as facebook and pandora work fine can u tell me what might be wrong

[@3469534695]

Can I use somthing other than expensive screen as a screen

[@7andGproductions]

I ordered the repair kit for the iPhone 4 screen replacement (order #10105193 on 06/28/12) and followed the instructions. It turns on, but the screen doesnt register touch and is suddenly talking to me. What could I have done incorrectly? I tried resetting it via iTunes, but it still does not recognize my touch (but, fortunately, is no longer talking). I reseated the digitizer connection, but it still does not recognize my touch. Should I send it in, or is there another solution I can try?

[@polokidd562]

What if I just bought an outer lens but how would I use my old digitizer

[@goodbyemylover83]

i just want to know is iphone 4 4g and 16g have the same screen

[@MyDanielDK]

where can i get the teardown flowchart???

[@waterbottle91000]

After putting the new screen the sensor doesn't work. When I make calls, it doesn't lock so I'm always pressing stuff with my cheek. Help?

[@ahseka25]

the 2 bottom screws on my iphone 4 are waaay smaller than yours and the screw doesnt fit so i cant even remove the back panel

[@FitzWyatt]

exactly, same thing happens to me. always the battery connector.

[@Overclockerxno2]

Thanks, this helped me very much! Ty

[@goodbyemylover83]

if i buy the screen iphone 4 4g , can i use it for 16g ?

[@MyDanielDK]

i cant find it plz help!!

[@JayYaung]

i pull the tab but the battery goes no where

[@iLikeToDrum1]

you need a pentalobe screw driver its a 5 point screw

[@RichMan612]

cool!

[@iLikeToDrum1]

yea they suck i bought a diy kit and they didnt send me the tools

[@iLikeToDrum1]

no 4s is a pain in the ass more cables and screws

[@goo6]

Why would anyone do this!

[@FatalPivotStrike]

You would be better off re-opening it and double checking everything.

[@Kaliver91]

7:38 - Thats what he said

[@JuhusOnY]

OMG...??

[@tampixena]

686454654545454654 steps to replace the screen ...i love nokia