I'm in the middle of building my second shed (10' x 16' lean-to) with your plans, and I'm really happy with the way the plans and video work together to make things much easier. I'm no carpenter, but as a communication major and teacher, I especially appreciate how the video instructions consistently explain the process. Some might miss this, but just like when I teach my kids something, I value instructions that teach not only the "what" and "how" of each task, but also the "why," -- a highly underrated and important piece of the learning process! (For those of us who can barely recognize a hammer two out of three times.) :)
@НастяКарманова-ы8з3 жыл бұрын
I am not in the construction industry nor am I a carpenter, I wanted a good guide to help with small projects such as small sheds and some remodeling around the house. So there’s a magic which is Shed Plan [ visit here *WoodBlueprints. Com* ]. This Shed Plan co.vers all my instructions from top to bottom in a step by step manner.
@MrJbeaste2 жыл бұрын
How tall did you make your wall studs? I'm building a 10x12 shed
@martyculleton39732 жыл бұрын
@@MrJbeaste Built mine at 10' to get the most out of the storage space... neighbor not so happy with the visibility of my shed from his side, but... sorry! lol
@MrJbeaste2 жыл бұрын
@@martyculleton3973 lol nice! Mine is around 8 ft
@lananh6236 Жыл бұрын
It is a very good book for beginners as well as for those that are already into kzbin.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt A very good basic ebook to keep as a reference too. I like it and the way the subject matter is presented. It has humor and that helps with the reading.
@tomstuart26523 жыл бұрын
Great! I need a much smaller shed but this has all of the design features I need. A local house being built gave me all of the extra wood they were throwing away. I have enough to start building this weekend.
@DK-bm5rg4 жыл бұрын
Probably one of the best vids on this I’ve seen so far. Very easy to understand
@eugeniabarrabes53394 жыл бұрын
Thank you Ryan for releasing a great product as this [ Check Details Here?> *WoodBlueprints. Com* ]. Most of the plans I have imagined in my mind are put down on your woodworking plans. This is more like a genius job. I love it!?
@granitestatedave Жыл бұрын
Best shed construction video I've found...very clear!
@Dirtmonkey9 жыл бұрын
Great Video. Good info and easy to pick up on. Clear instructions in an easy to understand format.
@icreatablestv9 жыл бұрын
Stanley Genadek Landscape and Construction Business Pro Thanks for watching and taking the time to share.
@martinmutugi20733 жыл бұрын
Great Video! Apologies for butting in, I am interested in your thoughts. Have you considered - Mahorrla Wooden Paradise Method (google it)? It is a smashing one of a kind product for building better sheds and woodworking minus the normal expense. Ive heard some amazing things about it and my cousin finally got great results with it.
@joosepkunder Жыл бұрын
Very good video. Excellent ratio between information given and time spend. Good tips. Thank you so much!
@stevenmorris22932 жыл бұрын
Looks like a nice classic Starcraft on that trailer .
@1943Fletcher Жыл бұрын
Excellent video. Easy to follow. Thank you.
@FullSendPrecision8 жыл бұрын
Great video series. What a view you have with those mountains. Wow!
@icreatablestv8 жыл бұрын
+Aaron Anderson Thanks for watching!
@juanmasavet89008 жыл бұрын
hi guys, the best success that i've had was by using the Wilfs Shed Formula (just google it) definately the no.1 course that I've followed.
@isaachorton51254 жыл бұрын
i love how easy the plans are in *WoodBlueprints. Com* to understand and the step-by-step videos they have. Makes getting material really easy
@MegaLeonidovich8 жыл бұрын
looks so simple, i already built my in my mind just watching this video lol, good job
@arturogoleman52214 жыл бұрын
Kudos for the Video clip! Apologies for butting in, I would love your thoughts. Have you considered - Canackenzie Astounded Cure (search on google)? It is a good one off guide for building better sheds and master woodworking minus the normal expense. Ive heard some unbelievable things about it and my friend finally got great success with it.
@patrickzadd52152 жыл бұрын
these videos have been very helpful with my shed project!
@adamkrasneski36793 жыл бұрын
Need to build my 1st bike shed. Simple enough. Just a 4'x4'x6' box mostly. This answered all my beginner questions. Best vid ive seen on yhe subject after about 20 vids.
@frankleicht53773 жыл бұрын
Two saw horses with ply or 2x12 makes a much more efficient and convenient cutting station. I never work on the ground. Assemble my walls on four horses with a ledger board clamped to header and floor plates. Use ratchet straps to tighten assembly and power nail it or power screw it together. Tight contact makes a big difference when using an air nailer.
@damianbird5999 Жыл бұрын
Been building our own house along with 5 others.And learning alot about framing. Which I HAVE NEVER done in my whole life I might add 😆!! This will be easy peasy. And it's an 8x10 build?
@semco7205710 жыл бұрын
That was very educational and I learned so much from watching this video once and will view it once more to make sure I have all the information.
@icreatablestv10 жыл бұрын
Sidney Mathious Thanks for watching!
@beautifulsunrisesandsunset90665 жыл бұрын
Thanks for making a complicated hobby seem easy!
@steveha6575 жыл бұрын
Thank you Ryan for releasing a great product as this [ Check Details Here?> *WoodBlueprints. Com* ]. Most of the plans I have imagined in my mind are put down on your woodworking plans. This is more like a genius job. I love it!?
@nhamvietson23474 жыл бұрын
when i built our shed i used a plan from *WoodBlueprints. Com* and it had all the blueprints, supplies, materials, and list well laid out for me.
@uncledaydays10 жыл бұрын
You can use this same concept, and make a little house:) just do what hes doing, and tripple the size, then make sections, and you can rent it out if you have land.
@swallowedinthesea118 жыл бұрын
+David Boggs Exactly! I learned about framing with shed builds like this and then reaching onto larger builds.
@ramonmontenegro49108 жыл бұрын
n
@nellyj41817 жыл бұрын
+David Boggs Excellent video content! Apologies for chiming in, I would love your opinion. Have you researched - Mahorrla Wooden Paradise Method (should be on google have a look)? It is a smashing one off product for building better sheds and woodworking without the headache. Ive heard some incredible things about it and my work buddy at last got cool results with it.
@steveholmes99666 жыл бұрын
You could but you would need bigger timbers damp proof and insulation
@REMREM786 жыл бұрын
the best success that I have had was with the Wilfs Shed Formula (i found it on google) without a doubt the most incredible course that I've followed.
@logmeindangit2 жыл бұрын
Thanks for the educational video. Two comments - First, at 2:35, you say to continue making marks every 16-3/4 inches. Shouldn't that be 16-3/4" inches for the first mark, then every 16 inches after that? (16" on center) Second, if a person makes a shed that is, say, 8 feet deep, would it make sense to make the floor less deep by 1" ( 7'11") if you use half-inch siding, so that the siding on left and right would cover the corners fore and aft, and be flush with the siding on the front and back?
@gailtaylor1636 Жыл бұрын
I've seen other suggest same on size of base/floor. One thing to consider is most add trim boards to cover the corners which would hide the gap. I have a "10x10" shed, quotes because I think it IS in fact 10' 2"ish x 10' 2"ish just due to this. But that is measuring from outside of trim. So I think, technically, the framing is 10 foot. I'm about to change the entire roof from a fairly flat peaked style to a barn roof. Need more height for the BowFlex! Plus, a loft would be nice for light stuff. So once I remove the trim I'll remeasure to see exactly how it's built. I'd bet shed is nearly 20 years old. Pretty solid shape. I'm rambling now. As usual.
@logmeindangit Жыл бұрын
@@gailtaylor1636 i prefer to *not* have a hollow little square area at each corner of the plywood sheathing if the walls are not made less deep (or less wide) by double the thickness of the outer plywood. It just means cutting the floor joists to result in a square dimension on the two-by boards that will fit inside full-width sheets of plywood (or half-width sheets if walls are 2, 6, 10, or 14' wide). For half-inch-thick sheathing, the floor joists, which include the perimeter 2x boards, should be 1" less than an even number of feet (2, 4, 6, 8, 10, 12, etc.) in one direction, but can be the full even number of feet in the other direction. That will assure a result of corners that have plywood filling the outer corners, with no gaps hidden below the corner trim, added later as a purely cosmetic cover. Gaps create places for bugs.
@DanielJEarp8 жыл бұрын
I wish I had seen this video before starting my shed. Very helpful, thanks.
@icreatablestv8 жыл бұрын
+Daniel J. Earp Thanks for watching!
@hildabarnett68873 жыл бұрын
interesting points ,if anyone else trying to find out backyard storage sheds plans try *WoodBlueprints. Com* Ive heard some dece.nt things about it and my colleague got cool success with it.
@twoweary6 жыл бұрын
I think it's easier and helps steady the wall when you raise it to add the double top plate when you frame the wall .
@thomasnappo6309 Жыл бұрын
Very Clear..to the point video..😊
@johndeneen9803 жыл бұрын
Outstanding job!
@humbertogarcia73175 жыл бұрын
I wished I had seen this before building my shed. It would had save me tons of time. Thank you for sharing.
@ellamcgrath13595 жыл бұрын
Thank you Ryan for releasing a great product as this [ Check Details Here?> *WoodBlueprints. Com* ]. Most of the plans I have imagined in my mind are put down on your woodworking plans. This is more like a genius job. I love it!?
@miyabi198507093 жыл бұрын
分かりやすくありがとうございます! 参考になりました!
@byronrhodes16599 ай бұрын
I want to build a shed. Smaller though. I have shed envy.
@MikeYac667 ай бұрын
Great video.
@bulkhogan80548 жыл бұрын
Part 5 At 2:39 "...continue making marks every 16 3/4"...", shouldn't that be every 16" after the first stud ? thus marking edge to edge? Nice series! thanks,
@icreatablestv8 жыл бұрын
Yes you are correct. Is what was intended is to say that you mark at 3/4" past every multiple of 16". Thanks for watching.
@VicariousAquarius8 жыл бұрын
Uhhhhhg! Please dub over that since I made this mistake and measured every 16-3/4 inch!!!
@greg33187 жыл бұрын
Nice catch, it's something that's kind of a given if you understand the basics of framing but someone new will completely overlook.
@larrypatterson39576 жыл бұрын
Not to state the obvious, but if we understood the basics of framing we wouldn't be watching this video. It should have an overdub or a statement regarding this issue. It is major and will screw up a bunch of beginner's walls.
@adamtki5 жыл бұрын
I noticed that too. It didn't line up with what I learned before. I checked other places and this indeed was a mistake in this video. What a waste of time. Now I'd need to double check other stuff in the video.... or just watch a different video.
@cbitm172 жыл бұрын
You guys rock great advice
@jimcarrillo50287 жыл бұрын
great job on this video.. made it so easy and simple .. broke it down where the steps were necessary. & overall a nice decent sized shed.. would you happen to have the plans to shed, how much did you spent ..
@louiecooper79384 жыл бұрын
No worries at all! My Shed Plans brings me up to speed with professional tips and tricks used by the pros [Go Here=> *WoodBlueprints. Com* ]. It really let me learn how to handle carpenter equipment, follow the right safety rules, and how to do your projects professionally so that they will look good and last!
@stevesamoffgridsmallholdin5378 Жыл бұрын
Good video 👍
@SunChips244 жыл бұрын
Great video series. What specific shed (including dimensions) is being built in this series? I'd like to make sure I get the right plans. What is the wall height for this series?
@icreatablestv4 жыл бұрын
This is our 8x10 Backyard shed plan. You can see all of our shed heights on this page: www.icreatables.com/sheds/shed-plans-heights
@mikev3518 Жыл бұрын
I'd stay away from these plans. They are plagued with errors and poor customer support.
@jeffs83304 жыл бұрын
So, if you had 2 walls span the entire length, and the other 2 walls were 7 inches shorter because they are inside, did you alter the measurement for your stud locations so that sheathing still lands on the studs at 4 feet? I didn't hear that part in the video
@Ty-tie_FTW Жыл бұрын
He's not sheathing it. Vinyl siding will hold the building together in the wind. It's fine
@abelincolnparth4 жыл бұрын
For two walls the joists are perpendicular so I can see how you would get two nails in but the other two walls just have the one floor joist. So how are they done? Is this international building code?
@victorromero47486 жыл бұрын
Well done! Thanks for sharing.
@tamerhamdy33082 жыл бұрын
wonderful
@Brain_quench3 жыл бұрын
Cannot afford a nail gun but do have electric drill. Would deck screws suffice or do they lack the shear strength?
@renobooth37597 жыл бұрын
what was the material cost for this particular shed?
@HomelessOnline2 жыл бұрын
Is a double top plate an absolute necessity? I'm building an 8'x12' shed and the design (provided by a friend) doesn't include a double top plate. All 4 walls are the same height. I'll be using tapered 2"x6"x10' roof support boards, tapered to 5.5" on one end and 1.5" at the other end. The taper gives the roof a slight angle, its fine because we don't get snow. Do I need the double top plate?
@truthbetold18552 жыл бұрын
I think all it does is adds stability. If you don't have it, you're just relying on tbe nails to hold the corners together. The roof would hold it together, but for the price of 4 2x4s, might as well add it.
@marcuswalker38066 жыл бұрын
Hello Mr. ICreatables I'm thinking of building my own shed. I would love to know the size of the shed you built and also a rough estimate of the cost in material... thanks
@lisaha96464 жыл бұрын
If You Want To Build A Reliable Shed, You Need Knowledge of Foundations, Piling, Planning and More ... So I'm giving you a comprehensive "how-to" guide on the basics of woodworking. Go here ==> *WoodBlueprints. Com*
@carlycfs2 жыл бұрын
I did follow your link, but your plans do not show the exact length of the wall studs . . . it just shows the top of the roof from the bottom of the ground. Therefore, you have to calculate the differences.
@debbiekirkland3476 Жыл бұрын
I'm only building a dog house, but these videos are priceless to me. It's a big dog so no plans to be found. I'm having to come up with my own plans.
@elizabethclayton12863 жыл бұрын
Do you have a list of supplies. I just know I’ll go to Home Depot and buy stuff I don’t need
@craneoperator48 жыл бұрын
did a lot of shed building before the invention of the nail gun
@arana25145 жыл бұрын
Your shed looks great! Thank you for sharing your knowledge with us! I built an 8x10 shed for my kids in my backyard earlier this year using plans I got from *WoodBlueprints. Com* Clear directions and an accurate materials list...It was great for a novice builder like myself!
@michaelreyes96965 жыл бұрын
Here's a huge collection of 12,000 shed plans: ShedPlans.xyz
@rickt95694 жыл бұрын
I have no carpentry experience so im learning as I go but im doing an 8x12 Caveman style lol
@DIYCustoms4 жыл бұрын
Is it cheaper buying a pre-made(assembly required) vs buying all the wood and materials?
@jamil32864 жыл бұрын
depends really if you're going to build the thing yourself but assuming you are then it will definetly be cheaper to buy all the materials and construct it yourself than to buy pre-made, not only will it be cheaper by probably a few hundred depending on how big you go but the quality should be a lot higher, of course if you construct it properly which i have no doubt that you can do!
@DIYCustoms4 жыл бұрын
Jamil thanks
@JW-or5xj4 жыл бұрын
great instructional vid.
@DeerFarm182 жыл бұрын
Do you have an estimate on how much it cost you to build that. I know it will be different but so I can get an idea?
@netmek8 жыл бұрын
When nailing the bottom plate to the floor on the side running parallel to the joists, and using 90x35 timber, means only one nail every 200mm would attach along the 35mm face of the joist (as the 90mm face of bottom plate will be on top of the 35mm face of joist). Will that be sufficient to hold it? Or should I use double joists for the two ends? Thank you for all the helpful videos! :)
@icreatablestv8 жыл бұрын
Double joists are not necessary. The siding overlaps on the outside and gets a nail every 6 inches. Thanks for watching!
@Lillykat3 жыл бұрын
What is a crown edge? Please give simple definitions as you go along. Also...I can’t see the marks you are trying to show me.
@ShowemRight7 жыл бұрын
what are the dimensions of this here great looking build..much obliged .
@ARCEJ333 жыл бұрын
What size was the door opening?
@brianbaker3595 жыл бұрын
Sure surprised that a Pro like this wouldn’t have a stand for his saw and have knee pads as well. I hate bending and working from my knees.
@freeganjustin66998 жыл бұрын
If you are going to the trouble of making walls and putting them up as a unit, you may as well screw it together rather than nailing. That way it can be dismantled (and even sold if you don't need it anymore).
@adamhamilton92596 жыл бұрын
Screws are more brittle than nails and tend to break, leading to more failures. Nails naturally have a little more "give" when the lumber eventually settles under load.
@barryrodriguez61496 жыл бұрын
@James Graul I got some great shed plans here if you're interested: ShedPlans.xyz
@buffplums Жыл бұрын
Thank you sir x😊
@ryanbruton864 жыл бұрын
If the floor joists are 16 on center and the walls are too then how is the wall stud not in the way of nailing the wall to the floor joist?
@hugoromero84147 жыл бұрын
Great and easy video to follow I do have one question, when making the header wouldnt sandwiching the two boards, 2x6s between the osb make it larger than the actual dimention of the 2x4? im not sure maybe i missed something could you please elaborate
@larrypatterson39576 жыл бұрын
2x6 have a thickness of 1.5 inches. Two together with 1/2" between is 3-1/2 inches which is the width of a 2x4 wall. In other words 2x4 is nominal dimension. Actual dimension is 1.6 x 3.5 inches. 2x6 is 1.5 x 5.5".
@lyonsadrian74034 жыл бұрын
Guys I am learning woodworking shed plans at *WoodBlueprints. Com* I recommend this website all you guys who are beginner or advance in woodworking
@buakawfan3334 жыл бұрын
naughty naughty OSB sheeting! Did you seal the edges or something? I'd rather go cheap and get OSB but most people advise against it as the edges expand with moisture and then don't contract back when dry unlike plywood.
@jaimeobrien25714 жыл бұрын
when i built our shed i used a plan from *WoodBlueprints. Com* and it had all the blueprints, supplies, materials, and list well laid out for me.
@oshaymusicgroup4 жыл бұрын
I have a question..I'm wondering if it's possible to build a shed that can also be disassembled for properties where you may be renting and not own.
@loadstar4 жыл бұрын
absolutely. pre build your floor and wall frames and use screws instead of nails on your top plates.
@ClausRow9 жыл бұрын
In this video you say its ok yo use 92 5/8th wall studs but in the plans I got from you guys it says 6ft 2-1/2. Is it really ok to not cut them because I would rather not waste the time cutting them =D.
@icreatablestv9 жыл бұрын
Ben Silverman Yes you can leave them longer but the total wall height will be 8'-1 1/2". So if you want the 8' tall siding to hang over below the floor joint you will have a siding joint a few inches down from the top of the wall. This joint will need to be flashed using "Z" metal.
@hoodfamilyhomestead537 Жыл бұрын
What size are the header boards for the door?
@ShowemRight7 жыл бұрын
is it ok to use ...3 inch exterior self drilling star screws for this project instead of nails?..I don't have a nail gun or compressor, but I do have a Porter Cable impact 18 volt impact drill along with a hammer drill...I like the impact wrench, because its quick and it torques damn good.
@bobbysather84567 жыл бұрын
Showemright YTchannel shear is much stronger with nails than screws.
@larrypatterson39576 жыл бұрын
As Bobby Sather says the shear strength of a screw is much less than a nail. Screws have much greater pull out strength. Most jurisdictions require nails. For homes you will want to use nails. For a small shed like this you can use exterior screws in my opinion. If it is big enough to require a permit, check with your local building department. PS - People have been building homes with hammers and nails for hundreds of years. You don't need a compressor, it just makes the job easier.
@cougargold3 жыл бұрын
If you’ve used hangars for your floor joists you won’t be able to nail the bottom plate into the floor joist only the rim.
@debbiekirkland3476 Жыл бұрын
What size nails on the wall studs? 6d?
@TopRival753 жыл бұрын
Two things I don't understand: 1) At 2:36, you say to continue making marks every 16.75". Don't you mean every 16", if the walls are to be 16" on center? You're clearly making a mark at 32.75". And 2) If you put a standard 48x96 sheet of plywood flush against the outermost wall stud, the other side of the plywood is going to end up just next to a stud, not overlapping it halfway. So what's the deal with that?
@MegaLeonardo19636 жыл бұрын
How about a list of material and what size shed are you building?
@gavinbrummettg85085 жыл бұрын
when i built our shed i used a plan from *WoodBlueprints. Com* and it had all the blueprints, supplies, materials, and list well laid out for me.
@stevenbaumann86927 жыл бұрын
I made a concrete foundation with 4x4s extending vertical in each corner so the wall studs and wall plates came second. It seems to have worked.
@icreatablestv7 жыл бұрын
Awesome!
@bubblehead76805 жыл бұрын
A little bit of semantics, but I what you are calling trimmer boards, I have always heard called Jack Studs. Nice video though.
@anitamom70635 жыл бұрын
Great video content! Apologies for butting in, I would appreciate your opinion. Have you thought about - *WoodBlueprints. Com* It is an awesome exclusive guide for building better sheds and woodworking without the normal expense. Ive heard some extraordinary things about it and my mate at very last got astronomical success with it.?
@salvatorehayes27533 жыл бұрын
So "2x4s" Are actually 1.5x4s?
@aulstingardiner93423 жыл бұрын
3-½ inches by 1-½ inches, actually.
@truthbetold18552 жыл бұрын
They are rough sawn 2x4, then they are trimmed down. It's easy once you get it, but its a bit dumb overall.
@rokan.othman2326 жыл бұрын
Could you please tell me the type & dimension of wall plates have used ? Is it (2*4')? Thanks
@bubblehead76805 жыл бұрын
Yes, 2x4 construction. 2x4's typically are 1.5 x 3.5, hence his marking a line 3.5 inches all around the floor.
@eugeniabarrabes53394 жыл бұрын
If You Want To Build A Reliable Shed, You Need Knowledge of Foundations, Piling, Planning and More ... So I'm giving you a comprehensive "how-to" guide on the basics of woodworking. Go here ==> *WoodBlueprints. Com*
@michaelsrowland3 жыл бұрын
How do you join or connect the walls after they have been hammered to the floor?
@dflex41803 жыл бұрын
what do u mean w nails on an angle to base
@thebolivei8 жыл бұрын
Thank you so much 🇧🇷🇧🇷🇧🇷
@nhamvietson23474 жыл бұрын
Whether you're done this before or it's your first attempt! - RyanShedPlans will help you decide which shed project is best suited for you, how to execute it and bring professional results every time. Visit => *WoodBlueprints. Com*
@danieloscarsotelo39103 жыл бұрын
@@nhamvietson2347 y y juju que que 0
@karenj.scarlett75098 жыл бұрын
I believe that anyone who ever tried building their own project using do-it-yourself recommendations, at least once, undertook the frustrating time when the result always was much worse than expectation.
@karenj.scarlett75098 жыл бұрын
+Karen J. Scarlett And a lot of bungling rookies (just like me) discover that getting a detailed guide is the only and surefire approach to get the project completed. This guideline is worth trying out: fine4.info/build-woodwork-today-x00021
@martinsanchez59934 жыл бұрын
Where are the coner post? Is there any corner post? You didn't show how to built a coner post.
@survivaljunky97849 жыл бұрын
Nice
@richg72643 жыл бұрын
is that header board 38 inches?
@potterbat39954 жыл бұрын
No plumbing up walls necessary?
@diegonicholas47165 жыл бұрын
Nice 👍🏼
@nourdineohamo79267 жыл бұрын
good work
@hildabarnett68873 жыл бұрын
Seems good so far! Was easy to talk to about his My Shed Plans [Go Here=> *WoodBlueprints. Com* ]. Guided me in the right direction & helped me und.erstand everything & in the end it was what I wanted
@carolinda6882 жыл бұрын
What is the height of peak on 6x6
@Kernszee2 жыл бұрын
What size is this shed
@1kilobayt9 жыл бұрын
What protects the building from tilting?
@icreatablestv9 жыл бұрын
Murat Macit If it is not attached to the ground via ground anchors there is only gravity that keeps it from tilting. If you live in a high wind area or your local building department requires anchoring then ground anchors can be purchased and installed.
@uggadugga80708 жыл бұрын
No sill sealer under the bottom plate?
@icreatablestv8 жыл бұрын
If it is finished, heated or cooled, space inside I would recommend sill sealer. For storage sheds it is not necessary since there is air leaking from many other places on the shed.
@maskdwn44455 жыл бұрын
You forgot to draw out the roof.. lol. Great video
@ronfernandez76914 жыл бұрын
Your shed looks great! Thank you for sharing your knowledge with us! I built an 8x10 shed for my kids in my backyard earlier this year using plans I got from *WoodBlueprints. Com* Clear directions and an accurate materials list...It was great for a novice builder like myself!
@adamwatson89004 жыл бұрын
i love how easy the plans are in *WoodBlueprints. Com* to understand and the step-by-step videos they have. Makes getting material really easy
@Rifleman031110 жыл бұрын
Thanks!
@isaachorton51254 жыл бұрын
i love how easy the plans are in *WoodBlueprints. Com* to understand and the step-by-step videos they have. Makes getting material really easy
@lyonsadrian74034 жыл бұрын
Thank you Ryan for releasing a great product as this [ Check Details Here?> *WoodBlueprints. Com* ]. Most of the plans I have imagined in my mind are put down on your woodworking plans. This is more like a genius job. I love it!?
@Funkie_Monkey8 жыл бұрын
Hi, im building a 4x7ft shed and need some advice if anyone can help me???? What I'd like to know is WHAT HEIGHT SHOULD I BUILD THE WALLS??? Thanks 😏
@Funkie_Monkey8 жыл бұрын
+Youbseep That Doesn't answer my question!!! You trippin lol 💊💉
@icreatablestv8 жыл бұрын
+ian latham Hi, it depends on the roof slope. If it is a 4 in 12 pitch and the lower wall is 6 feet then the roof would be 16 inches taller which is 7'-4". You can see more on how to install roof on our How To Build A Shed Pages. www.icreatables.com/how-to-build-shed/how-to-build-a-shed.html
@rickyhicks65038 жыл бұрын
Do you have to level the walls once they go up?
@icreatablestv8 жыл бұрын
As long as the studs are all the same length and your floor is level the wall will be level. You will make it plumb when you install the siding. See the next siding video. www.icreatables.com/sheds/photo-gallery-modern-sheds
@senadonia63678 жыл бұрын
I have spent months studying building sheds and found a fantastic website at Wilfs Shed Formula (check it out on google)
@Yahoomediaclub7 жыл бұрын
I've done mines the same, thanks...☠️🎸👍
@iyakurnia9 жыл бұрын
excellent.... good
@MrWallyrooster2 жыл бұрын
OH ESS BEE!!!
@cocosteen3826 жыл бұрын
How much did it cost in total for you to build this shed?
@icreatablestv6 жыл бұрын
About $1500.00
@jethross129 жыл бұрын
not to be critical but red dust shows up better then the blue shit.
@icreatablestv9 жыл бұрын
jethross12 Very true.
@AnthonyHart96 жыл бұрын
jethross12 at least my dude isnt using white lol
@elwrencho81895 жыл бұрын
I wanna try building one I need it. I gotta get out off storage. Costing!
@lytlebig1475 жыл бұрын
just ordered the *WoodBlueprints. Com* guide for step-by-step videos and different plans to BUILD A SHED. they have some awesome plans in there
@icreatablestv5 жыл бұрын
Thank you for watching and commenting!
@hunterboutt8 жыл бұрын
what kind of nails do I use if i'm not using a nail gun?
@icreatablestv8 жыл бұрын
+HB Games 3 1/4" coated nails for wall framing when building a shed. They have a thin coat of glue on them that helps them stick in the wood better. Thanks for watching.
@fshanahan9 жыл бұрын
What is he doing when he's looking along the length of each stud? Is there an "up" and "down" to the stud?
@icreatablestv9 жыл бұрын
Francis Shanahan That is called crowning. All the boards should have their bow going the same way so that the siding or drywall attaches to the storage shed walls more evenly.
@willenjane44779 жыл бұрын
Hey Greg go check out *mysecretblueprints. com* ; those plans are priceless and helped so much with building our new shed. everything was laid out perfectly
@LuisLopez-xw2pi9 жыл бұрын
H
@thebrowns34126 жыл бұрын
site doesn't exist
@dones3944 жыл бұрын
What's the size of the King studs????
@icreatablestv4 жыл бұрын
7'-2 1/2"
@kevinwoods40897 жыл бұрын
Hey, talk with Woody Hyezmar, or you can at least download his free plans. If you're starting out that's a way to go about it.
@Dano-ej4hzАй бұрын
I wanted to see how to nail the corners together and the top plates. The video was filmed from a mile away and rushed through the directions. Guess I will have to find a better video to learn it.
@rauleyanderson77804 жыл бұрын
about how much wood should one get to complete this project
@jaimeobrien25714 жыл бұрын
No worries at all! My Shed Plans brings me up to speed with professional tips and tricks used by the pros [Go Here=> *WoodBlueprints. Com* ]. It really let me learn how to handle carpenter equipment, follow the right safety rules, and how to do your projects professionally so that they will look good and last!
@2LegitTwoQuit4 жыл бұрын
How much for everything you used here ?
@courtjohnson30034 жыл бұрын
Thank you Ryan for releasing a great product as this [ Check Details Here?> *WoodBlueprints. Com* ]. Most of the plans I have imagined in my mind are put down on your woodworking plans. This is more like a genius job. I love it!?
@TurkNukemHD8 жыл бұрын
if you guys think that this is not durable enough, i urge you to place another 4x4 rail right in the middle so in long run your 2x6's will NEVER bend thus lenght of this sheds life will probably doubled...