ID80 foam guide and tutorial + Acrylic bottom review!

  Рет қаралды 6,202

Rx003

Rx003

Күн бұрын

Пікірлер: 50
@HipyoTech
@HipyoTech 4 жыл бұрын
Love your keycaps and cable!
@Rx003
@Rx003 4 жыл бұрын
Thank you! I actually need a new one since im building the nk65 entry soon :)))) anyways thank you for the comment!
@TheAsianNerd
@TheAsianNerd 4 жыл бұрын
I just got my acrylic base and the pcb foam. I'm so excited right now
@Rx003
@Rx003 4 жыл бұрын
Best combo ever and I really like that ID80 made this available for purchase instead of keeping it and making us buy the version 2. Will do a sound comparison soon as well ! Thank you for checking out my new video!
@mugen264
@mugen264 4 жыл бұрын
@@Rx003 with the acrylic base and foam from idobao- is that enough? should we still add the packaging foam to decrease pinginess? thanks for your help!
@Rx003
@Rx003 4 жыл бұрын
@@mugen264 I think that should be enough since the pcb/plate foam should decrease the pinginess when typing, one thing you could do is try the metal back plate and notice the sound then change it to the acrylic 👂 It all goes down to preference, you can still add a lil bit of the thin white foam that I showed when settling down to the acrylic, if you are still not satisfied if ever :)
@lil_syba
@lil_syba 4 жыл бұрын
Hey man. Also have some dim rgb lights. Will look out for reset button on my PCB. But did you mention that you did some cut-outs for the LEDs to shine brighter?
@Rx003
@Rx003 4 жыл бұрын
Yes sorry as I cant remember and I dont have the id80 with me, but It should be on the bottom part of the pcb at the back. For the cut out that is just the foam that I placed so that it wouldnt hinder on LED's
@lil_syba
@lil_syba 4 жыл бұрын
@@Rx003 Thanks my man, awesome content btw keep up the good work :)
@Rx003
@Rx003 4 жыл бұрын
@@lil_syba Thank you I really appreciate you!
@Envy427
@Envy427 4 жыл бұрын
Interested with the zaku deskmat. Where to get?
@Rx003
@Rx003 4 жыл бұрын
Hi, this was purchased on Kprepublic as a group buy.
@Arsnicks
@Arsnicks 4 жыл бұрын
Subbed! Super keen for the sound test as I have lubed creams in mine and plate foam and acrylic bottom coming!
@Rx003
@Rx003 4 жыл бұрын
Thank you for checking and subbing! I'm about to be finish with the edit most likely tonight or tom would be the sound test + tutorial on how to flash the ID80 with QMK.
@Rx003
@Rx003 4 жыл бұрын
Hi new video is out!
@fireboss59
@fireboss59 4 жыл бұрын
When will you upload vid on how to flash it. I need to increase brightness of rgb lights asap. THey wayy to dim stock.
@Rx003
@Rx003 4 жыл бұрын
Sadly my video about flashing it got corrupted and my ID80 was borrowed. For the rgb lights what I did was just reset the pcb, on the bottom part of the pcb there should be a button, just press it and you would notice the rgb would be brighter.
@Rx003
@Rx003 4 жыл бұрын
I also followed this video: kzbin.info/www/bejne/jIOYZIqlbr9sbJI
@fireboss59
@fireboss59 4 жыл бұрын
@@Rx003 i could not find the button, is it on the back side or on the side that has the switches? Mine is already installed... Also what did you press to put your keyboard in boot mode? I know how to flash just need to know how to get the keyboard ready to be flashed
@Rx003
@Rx003 4 жыл бұрын
@@fireboss59 The reset button would be on the back side of the switches bottom part its a rounded button (under A key)
@Rx003
@Rx003 4 жыл бұрын
I didnt press any to boot mode, once I pressed the reset button it was ready for flash at least for my pcb some people done it while holding Space+B while plugging the keyboard in
@richburmond6761
@richburmond6761 3 жыл бұрын
Yooo do u recommend this one if i dont want to wait 5 months for a gmmk pro? Getting boba u4 with it. Acrylic back plus foam they offer. The id80v2 is a lot more expensive than that setup:(
@Rx003
@Rx003 3 жыл бұрын
The only thing I dont like about the id80 is the integrated plate it makes the typing experience stiff but some of my friends have the gmmk pro and they said its stiff. I have yet to try the gmmk pro so I cant really compare both for the stiffness. ID80 is still a good starter kit, the acrylic back really helps negate the hollowness. Still a solid board imo. Thank you for the comment and for checking out my channel really helps out with my engagement! Really appreciate this and good luck with your build!
@richburmond6761
@richburmond6761 3 жыл бұрын
@@Rx003 But stiff, I'm not sure how to interpret that. I have a ducky one 2 mini with cherry browns atm. So Boba plus ID80 will never feel worse right? And the foam must also help the hollowness? Is it that bad? No problem! Reacting is always good :) But I am not sure what to do, another guy also mentioned the hollowness :(
@Rx003
@Rx003 3 жыл бұрын
@@richburmond6761 (1) Stiff meaning there's no flex or bounce when typing. (2) Foam will really help with the hollowness. (3) Yes, it doesnt mean it would feel worse For the hollowness theres really nothing you can do but to add some foam.
@CimInc
@CimInc 4 жыл бұрын
I think if you tape off the PCB you can pour in silicone and make a custom silicone sound dampener in the board. Did that for my Tofu after I saw someone do that on youtube and it works amazing. Much better than foaming like that :)
@ChunkyWanders
@ChunkyWanders 4 жыл бұрын
gandaaaaa ❤️
@Rx003
@Rx003 4 жыл бұрын
Hi new video is out!
@eXSPLY
@eXSPLY 4 жыл бұрын
Do a flash tutorial please
@eXSPLY
@eXSPLY 4 жыл бұрын
mine is coming in next week with acrylic bottom too :)
@Rx003
@Rx003 4 жыл бұрын
@@eXSPLY Will do the video tonight and try to upload it tomorrow! Make sure to hit that SUB button! Have fund building your ID80!
@eXSPLY
@eXSPLY 4 жыл бұрын
@@Rx003 Already subbed with noti's on my friend, thank you!
@christopherpierre-louis9982
@christopherpierre-louis9982 3 жыл бұрын
SHOW HOW TO FLASH ID80 V2 PLEASE!!!11!!!1!!
@Rx003
@Rx003 3 жыл бұрын
Hello, sadly I already sold the id80 and forgot to flash it
@snekker9480
@snekker9480 3 жыл бұрын
High quality, lil late. But still helps. Thank you so much! Deserved a like and sub!!!🔥
@michelangelo7441
@michelangelo7441 4 жыл бұрын
Plastic is more rigid than metal when mental hits someone it vibrates making it ring, since plastic is more rigid it absorbs most of the sound and it doesn't vibrate as much. I believe dat is the science but on the other hand SICK KEYBOARD
@Rx003
@Rx003 4 жыл бұрын
Hello! Thank you so much for checking me out! Please be sure to hit the sub for more videos! I will upload a new video today please watch out for that. I really appreciate the comment as it helps my channel a lot!
@drake5423
@drake5423 4 жыл бұрын
Show how to flash it in the next video please!!
@Rx003
@Rx003 4 жыл бұрын
Sadly my video about flashing it got corrupted and my ID80 was borrowed :( For the rgb lights what I did was just reset the pcb, on the bottom part of the pcb there should be a button, just press it and you would notice the rgb would be brighter.
@Rx003
@Rx003 4 жыл бұрын
I also followed this video: kzbin.info/www/bejne/jIOYZIqlbr9sbJI
@takoyakeys
@takoyakeys 4 жыл бұрын
Nice vid! Subscribed!!
@Rx003
@Rx003 4 жыл бұрын
Thank you! Looking forward on your videos as well
@Rx003
@Rx003 4 жыл бұрын
Hi new video is out!
@mugen264
@mugen264 4 жыл бұрын
so helpful!@
@Rx003
@Rx003 4 жыл бұрын
Thank you so much for checking me out and finding this helpful! I also have a lube tutorial video :) I also have more to upload including a broll of the Id80 plus the full review for it!
@Rx003
@Rx003 4 жыл бұрын
Hi new video is out!
@tek9092
@tek9092 4 жыл бұрын
Subbed dawg
@Rx003
@Rx003 4 жыл бұрын
Hi new video is out! Thank you for subbing and dropping by!
Idobao ID80 v1 75% Keyboard | Build and Review
12:42
Patrick Rennie
Рет қаралды 35 М.
DIY Mechanical Keyboard IDOBAO ID80 | Mechanical Keyboards
13:18
Serendipity
Рет қаралды 21 М.
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
The All MSI Gaming Setup!
16:20
Linus Tech Tips
Рет қаралды 369 М.
$150 Budget Hotswap Custom Keyboard - Idobao ID80 V1
11:34
Hamaji Neo
Рет қаралды 644 М.
That cheap Alice style custom mechanical keyboard
16:00
TaeKeyboards
Рет қаралды 177 М.
Why Your Brain Sabotages Your Goals (and How to Fix It)
11:56
Productive Peter
Рет қаралды 10 М.
How to Lube MX Style Switches
11:17
Taeha Types
Рет қаралды 1,5 МЛН
Build a Webshop - Angular, Node.js, TypeScript, Stripe
3:47:26
freeCodeCamp.org
Рет қаралды 529 М.
IDOBAO ID80 Case Foam and Acrylic Bottom Review ASMR
6:36
Hipyo Tech
Рет қаралды 32 М.