How to make Digital Weight Measuring Machine with Arduino | Arduino Project

[@IdeasTv]

Tell me how was this video? & also share your ideas for the next video? Video related Useful Links:- (Affiliate Links) Arduino Code: drive.google.com/file/d/1hPeaR_1ckhzWC0M4x8vkOJuJFuTvcwCE/view Circuit Diagram: drive.google.com/file/d/1iVpGCjSHlAm27qNo-RWnHAXRbfccjyaD/view Complete Arduino Starter Kit: www.banggood.com/custlink/GvGmq4yGcC Cheap Arduino Starter Kit: www.banggood.com/custlink/vKDGkeRGp5 All Sensors & Module Kit: www.banggood.com/custlink/KvKmz6hDWO

[@uttamdutta3664]

HX711.ADC file not included in this code..will it work!

[@3xAudio]

Always interesting ideas to get inspiration in the Arduino community thanks for sharing.

[@IdeasTv]

You're welcome :)

[@prasunbiswas8025]

For more than 200kg load cell the connection with any other microcontroller logic will be same right?

[@IdeasTv]

yes

[@ssartandcraft667]

Hey bro this is my 2 nd comment and i says that your so cool at this and now i m your fan

[@IdeasTv]

Thanks!

[@kirshantawesome788]

Hii currently I am trying to do this project, but I my LCD screen is been showing blank ...I have tried to adjust using the potentiometer but no difference, any suggestions?

[@IdeasTv]

Check your jumper wires connected to the LCD's input pins

[@Aryan-sl5ye]

I want to add buzzer . How we can add buzzer if the load is increased more than 5kg the buzzer had to be beeped

[@IdeasTv]

this will require code modification

[@EashwarArivazhagan]

Very good video. I am new to load cell design. My doubt is how do you decide max. and min. surface area of circular disk or plate mounted on the load cell? And will the weigh scale produce same results if 30gram weight placed on corner or edge of the plate instead placed to centre (as shown in video).

[@arduinotamilan3300]

bro instead of using a lcd screen we can use serial monitor

[@subhanmohammedkhanansari1648]

Nice weight machine

[@IdeasTv]

Thank you :)

[@3D_Printing]

Hey :) what is the value of the variable resistor, thanks. I unsure

[@IdeasTv]

103

[@3D_Printing]

@@IdeasTv Thank You, the picture shows 103 ohms, but I wanted to check

[@IdeasTv]

Pot 103 means 10K Ohms

[@3D_Printing]

@@IdeasTv Thanking You 103+3x0 =130000 times :)

[@minhquantran3714]

Great video! I manage to do this project, but I have some problems. Please help me if you have time. 1. After the calibrate, when there nothing on the scale, the number seem to be unstable, it change in the range from -5 to 5, I keep the same code and using 100g in calibrate part like you. 2. I don't quite understand readCount() function. Can you explain what it is?

[@IdeasTv]

-5 to 5 variations when nothing on scale is due to improper placement of load cell kindly try to change your load cell base, screws, position or disk on load cell etc.

[@vipalsharma4120]

Where fit switch and why

[@minditon3264]

can we build this circuit on large scale I mean with 200 kg load cell

[@IdeasTv]

ofcourse why not

[@minditon3264]

@@IdeasTv Is it possible to connect 4 load cells in one circuit ?and how?

[@irnb1676]

Hi! May i ask if how does arduino uno differs from other weight measuring machine without arduino in it? How does it helps the weight measuring machine to be 99.9% precise? Hoping for your reply. Need it so bad for my project. Thank u

[@IdeasTv]

Arduino is accurate but not as accurate as a card/circuit board which is specifically designed for weight measuring purpose

[@nayeemz]

Please can you tell me how can i use ohm's resistor instead of variable resistor?

[@IdeasTv]

why you're willing to use a resistor? controlling the brightness of display is more easy with the variable resistor.

[@nayeemz]

@@IdeasTv it's unavailable that's why i want to use ohm's resistor

[@kesavamanikanta965]

Can I use 10 kgs load cell for this code..?

[@IdeasTv]

Yes you can

[@sameershahzad7379]

hey bro please tell us how to write codes in aurdino complete

[@IdeasTv]

noted.

[@ka-eskwelatv6097]

please upload video for programming of code. thnx

[@prabhakaran6465]

Invalid library found in C: this type of error is showing ie.no headers files (.h) found in C:

[@vishal_vishuzzz]

Can I get circuit configuration

[@IdeasTv]

description

[@maisharahmarzuki9765]

hello, sir. if we do not use the variable resistor is it okay? or it is necessary? please answer i need help. thank you in advance and may god bless you :)

[@IdeasTv]

Use 200 to 1K Ohms resistor for constant resistance value instead of variable resistor, if variable resistor is not available.

[@johnsonalice5740]

Can it measure kg

[@IdeasTv]

yes, code modification will be required

[@alkavd2010]

Can I use 20 kg load cell with this code

[@IdeasTv]

yes you can but little change is required!

[@alkavd2010]

@@IdeasTv what changes please tell me

[@vishnupanth2613]

Code?

[@jsdzagf1778]

sir where your coding i don't see

[@IdeasTv]

in video description

[@shivankfootballlover6002]

Hey bro u have not coding in the video Why

[@IdeasTv]

code is available in video description

[@kumarvishal113]

How much total cost for this project ?

[@IdeasTv]

around 10$

[@CreativeHRM]

😭😭😭😭😭😭😭😭😭😭

[@MegaKopfschmerzen]

If only there was a simple word for 'Weight Measuring Machine'...

[@graememoffat6648]

Scales

[@alkavd2010]

Hello Ideas TV,I have a problem with this project so can you contact me so it will so helpful

[@IdeasTv]

yes, please tell me

[@alkavd2010]

@@IdeasTv I have used the same thing you do and same connection but when I plug in the power it does not turn on .