How to Connect Your ididit Column Wiring to Your Vehicle's Wiring

[@rocketqueenone]

Thanks for making this video! I needed knowing on how to take wires out of male plug.

[@ernestwhite8669]

I recently bought an ididit steering column along with an electrical adapter to connect to my original wiring.When I installed the new column I noticed there was hardly any wiring coming out to the plug that came along with the column.As I hooked up my wiring it was so short that it had pulled my wiring backwards away from the column to the side where my factory plug in is located and wasn't to overly concerned at the time.now it's only been about 1 month and my turn signals aren't working anymore and when I have the turn signal on and tilt my column I can hear what sounds to be electrical wiring arching or frying.Either way this is an issue that needs to be resolved by the ididit corporation.I recommend at least 3-4 more inches of wiring and make sure the wiring is secured within the column itself

[@CurtAllen-fn5gr]

I have a 1999 F 250 SD and have replaced the steering column with a E350 2003 column . Is there any wiring changes besides the obvious. I Are all wire matched up with each other.All the same but someone said something about the ignition box

[@Rockinruffhouser]

I need to go from you Ididit turn signal switch to the stick wiring harness on my 64 chevelle. Is there an adapter?

[@AlanFlynn-cc2pl]

I need to know what wires do what do I can put 12 volts into steering column so the Sig lights work

[@twistedtuned4273]

nice video

[@lupehernandez7369]

How to connect on 8 pins conector.

[@Mike-Olds-1]

Hi Robin 👋

[@Cee-FJedi]

Hi is there an adapter for a 1965 mustang? I see your standard one is completely different. Thanks

[@ididitinc]

Sgt Frag Howdy! We include the mating end of the column plug with every GM based Mustang column. The Ford based columns use Ford wiring and will attach to the original column wiring plug.

[@markcox1172]

what supply's power to a 1990 Toyota pickup at the steering column I have two green wires not getting power what supplies the power and my wipers don't work either fuses are good switching the dash is good there's a fire come out the ignition switch or does it run can anybody help me no power going to turn signals at all

[@adangarcia9505]

@ididitinc I have your steering wheel for a 1965 mustang. is there a way to wire the steering column to a stock ford pig tail.

[@ididitinc]

Yes you can do this, just look at the wires and match up color to color for our Ford based column. For a GM based column, then you would need to match things up by function not be color. But both can be done.

[@jimbosplice5668]

Where the black wire connects under steering wheel

[@TheJohnny1932]

Lose the music.

[@robertsanders3682]

just make the connector round and save us the hassle

[@manuelesquibel4577]

Need to connect wiring to harness for 99 Mustang signal lever

[@drumbeastgaming2327]

Iam pissed because I order the female plug and it doesn't fit

[@justanother67camaro32]

Lose the music, and some close ups on important things like crimping the wires (how the crimp should look and what number to crimp with) would make for a great video. Still very helpful though.

[@alanaustin9594]

Good info but stupid distracting, discordant jazz

[@legotech7]

Need to make a video that is vehicle specific, for example gm column to say, a 1973 mustang wiring. Showing the colors for each. This vid was a waist of time..