Pedals themselves needs to be smaller, and to be modular so they can fit into specially built boards for them. The whole form factor system needs to change. In fact, they need to be digitally switchable and accessible other than by foot.
@timfireblade4 жыл бұрын
Just two pots in a box and a switch, very simple, I can’t think why no one has thought of it before. Brilliant idea as is the insert point for your fx chain.
@richardvasquez89114 жыл бұрын
They have they just don't show it or talk about it it's been done for many years
@Liko81DJ4 жыл бұрын
@B 420 You must not have many pedals, or play many gigs. If your pedal board is 4 boxes duct-taped to a plank, then leave some space between at least two pedals to get the jacks out, do exactly what you propose and save the money. If your pedal board is a dozen effects carefully arranged on a purpose-built aluminum or steel riser in the most compact pattern you can manage, with meticulous care paid to power and signal routing, and getting anything on or off the board for any reason is a question of several minutes at least, a passive insert module like this little black box is a friggin' godsend: * Quickly add in that single-use pedal that would be a waste of board space, *except* for that one crowd favorite song that just doesn't sound right without it. * Try out pedals as part of your existing signal chain without rewiring your board. * Place this box before the first pedal you'd use in an effects loop, and you can switch between a totally inline chain and an effects loop chain without rewiring the board. * Hook in a sub-board to a main board, reusing the smaller Pedaltrain that's been gathering dust since you upgraded. * Swap out entire sub-boards of effects based on setlist needs. Just because you can think of a simpler way to handle your own pedalboard doesn't mean this isn't extremely valuable to someone else with a different situation.
@billpavloff77994 жыл бұрын
I'm loving that unintentional swoop you get while switching!
@abradolfhonkler92874 жыл бұрын
It should be a pedal in and of itself. I'd call it "Alien Aneurysm."
@Liko81DJ4 жыл бұрын
Pretty sure that's the Cirrus responding to the quick change in expression setting, and in that sense it's actually intentional. But yeah, you can have a *lot* of fun with a delay that behaves this way when you mess with the time setting.
@haczabim14 күн бұрын
4:22 That tone is great! And that sounds like an ac/dc chord ("you shook me all night long")
@looperwerk4 жыл бұрын
Thank you so much for the video, I love it! I would love to be from Berlin, but I'm from a little village called Lichtenstein - but the guys that built the awesome KMA Cirrus seen in the video are from Berlin, so that's still somewhat correct ;-)
@bartvschuylenburg4 жыл бұрын
Do you have or plan an English language website? Even though I’m Dutch, my Deutsch is not so good...
@looperwerk4 жыл бұрын
@@bartvschuylenburg you can switch to english in the right corner of the website (next to the search bar on mobile). It's only like 80% translated yet, but I'm working on it ;-)
@EytschPi424 жыл бұрын
Lichtenstein... Berlin.... iss doch alles das selbe.... ahm..... neee! Geile Produkte! Nach dem Clickbait Titel läuft das Video ja gut an... da sollte sich was bewegen mit verkäufen, hoffe ich!
@crissvis92044 жыл бұрын
Great device, can that conect into a multieffects or modeler pedal? Mooer GE 200 for an example. Thank you✌️
@Liko81DJ4 жыл бұрын
Can you make the Quartet or Quintet with the power pass-through like the insert box? That would be the perfect one-box patchbay, allowing both "guest box" use and the effect loop option.
@stevethebeeline444 жыл бұрын
7:00 "Without ripping your board apart...ummm Napoleon Board Apart???" Ha, Nice one Henning!
@abradolfhonkler92874 жыл бұрын
Henning is peak #GermanHumor. I love it.
@rickc21024 жыл бұрын
Water loo talking about?
@abradolfhonkler92874 жыл бұрын
@@rickc2102 not gonna lie, that made me lol a bit
@PooNinja4 жыл бұрын
🎶We are the switch of the pedal of sphrinx oh wait cirrus 🎵wait what knobby knob expression so total wha cocker pedal 1/2 or fully cocked 🤘🏽at the turn of a knob RIP Neal 😢
@AnneSulikowski4 жыл бұрын
This is such a great idea for people who like to quickly switch up their signal path.
@brixtonalijah29523 жыл бұрын
Sorry to be so off topic but does any of you know a tool to get back into an instagram account? I was stupid lost my password. I appreciate any tricks you can give me!
@denverbrennan64183 жыл бұрын
@Brixton Alijah Instablaster =)
@JV-rx3ov4 жыл бұрын
I do a similar 'pedal add' wiring on my board. Right between the fuzz/drive pedals but before the time/mod pedals. I use a One Control 2in/2out box wired in between with a jumper in it when I'm not using it. The big difference with the Looperwerk box is the power ability, which is great. I've used my little box many times over the last year or so to audition pedals in my rig. Never lugged my board into a store to try it though. Edit: After looking at Looperwerk's site, I'm impressed! I think I'm definitely going to look at them when I build my next board. It looks like some seriously high quality stuff.
@gamian_skillard13333 жыл бұрын
Is looperwork still in business? Their website is down and I really wanted to buy some their stuff! 🤘
@gilguajardo78083 жыл бұрын
I’m trying to find out the same thing. Just learned of the company. But the last post on their FB is from March 2020. I hope the guy is ok.
@alexanderwebb30324 жыл бұрын
I imagine you could put pedal insert box between your front of amp pedals and effects loop pedals and it would let you switch between a 4 cable or 2 cable setup. Very cool.
@duanekauffman18182 жыл бұрын
What a beautiful guitar
@bryanblackburn96734 жыл бұрын
I emailed source audio an idea to modify the app for their pedals so they could program the extra unused control input in their one series pedals to send out control settings to pedals then make it a setting that could be stored as a part of their midi presets. I did that a couple months or so before before the EHX version of this called ctl came out and then of course I found out they had the reflex pedals to do exactly what I needed this to do since it will control 3 analog based controls and also it offers midi already plus it has presets so that is my top most wished for item. Now I can get one reflex pedal and control 3 analog pedals and as many midi pedals as I want in my midi rig. If I have an unused loop in a switcher or a source one pedal that offers a loop I can use it to test pedals. That makes a pedal more valuable to me since it comes with a loop so IO would be more prone to add in a source audio pedal that has a loop. Chances are I would add something into that loop and keep it there but if I did not it would be available. Everything I buy I try to find a way to use a loop if it has one and many times I want that extra device to create a separate parallel line out from my main tone which gets fed to a mixer and this is why I love the axe fx and Helix with their modular approach to loops. For example with an axe fx I can have the following pedals running parallel to each other simultaneously 1. hedra. 2. ravish sitar 3. attack decay with frequot in its loop 4. A vibe pedal, 5, rotary pedal, and 6 an ehx mel 9. Now I would need several control pedals attached to not only control rate settings but I would want a few pedals that used midi to pan between things. For instance if I had a rotary and a vibe on in the modular signal chain then I might want to pan between the two so that I start off using one like a vibe and at the end of my solo I pan it to a rotary tone that has a speeding up rotary sound hitting that last note in a solo. Or I might want to pan between a sitar tone on ravish sitar and a crazy patch on hedra or even an attack decay with some shamisen setting and feedback created by frequot in the loop of the attack decay pedal . I can use this approach to fade in a mellotron sound with a foot controller without affecting my main guitar tone. These things can be used as intros and endings for solos, and song transitions.
@Saycheeseanddie843 жыл бұрын
Greeting from Los Angeles! I’m a big fan of yours, I always look forward to seeing you demo the gear I want!
@jwlademann4 жыл бұрын
I made a much less sexy version of that exp switching doodah myself, mostly for switching delay times as demonstrated. Very useful.
@clivemcdaid88174 жыл бұрын
You could mount that second box under your board and keep it out of the way. Tidy and discrete. 👍
@sergiopedro46682 жыл бұрын
You had me at "Napoleon Boardapart" ...
@0riole114 жыл бұрын
The insertion box looks like something I'm after for the amps I have setup in my studio, on shelves like you do, for quick, front access to the effects loop
@billytremoloband74564 жыл бұрын
The first pedal would be very handy with a dm2w to enable different settings, say like a slap back and long delay for a good solo sound!
@18JR783 жыл бұрын
I too have Napoleon Boardapart syndrome. 7:05
@KailynsJoy4 жыл бұрын
Came here because the title said so. It's like you know how to communicate with the target market 🤔
@johnvcougar4 жыл бұрын
Love the dog play at the end.
@ericcarpenter32634 жыл бұрын
That’s why I love this channel. You make me want something, I never knew I needed. Those are both awesome. Thanks man.
@kickbiker79204 жыл бұрын
ANOTHER consistently excellent clip!
@benjaminjohnholland68784 жыл бұрын
It's a splitter, taking the full time ratio to half time on the stomp.
@MutethatBozo4 жыл бұрын
It has wah. I like it.
@pedalscapes4 жыл бұрын
Cool utilities...
@Wally552234 жыл бұрын
Don't know if the question already popped up in the comments, but would that little loop insert possibly fit under a pedaltrain nano?
@19universe814 жыл бұрын
Love that PRS!
@Bar10derChannel4 жыл бұрын
DS Custom from Germany have the same thing. I use it for my Dunlop Univibe. It has two foot switches (on/off and slow/fast), awesome!
@henrikkaveryd33744 жыл бұрын
"So this is a...well, I don't know what it does or where it goes." "What am I doing here?" "Oh, I don't know which side goes on the pedalboard." Great review... 😕
@markusfinkler96254 жыл бұрын
Somehow that Tuner looks much better than that Shirt. A shame it's not promoted ;-)
@StuartRochabrunt4 жыл бұрын
Loved the intro!
@wolverine7771824 жыл бұрын
What is the title of the intro song and what album of your discography is it in? thanks, loved the entire video, the part where you showed the dogs with the audio track killed me, i am just too far from my pup...
@EytschPi424 жыл бұрын
it is from „Psychic for Radio: Standing Wave“
@danabnormal58924 жыл бұрын
Hey Henning. Do you know if the new fender ultra teles have the spankinisquackysknack with the noiseless pickups. Love to see you review it.
@ShlomirBareket4 жыл бұрын
That jumper matches your guitar. You are so ‘wacky’!
@danfango13334 жыл бұрын
Why would you use a nob to sell your knobs?🌴
@marksguitars56174 жыл бұрын
very, VERY cool is right!
@crissvis92044 жыл бұрын
Great video, can that conect into a multieffects or modeler pedal? Mooer GE 200 for an example. Thank you✌️
@EytschPi424 жыл бұрын
if it has EXP input then yes
@crissvis92044 жыл бұрын
@@EytschPi42 Thank you a lot. The Mooer GE 200 only has 3 swtiches up, down, control. It has an input exp 2 Jack. Would I use this device to change a preset to if I conect to the exp 2? Sorry por the question.
@looperwerk4 жыл бұрын
@@crissvis9204 Hi! You can connect it to the EXP2 socket and then it works basically the same as the built in expression pedal. You can enter the settings of the GE 200 and set which parameter is changed by the built in expression pedal (EXP1) and which by the external one (EXP2). So if you set the parameter the external pedal controlls to "delay time" you would have the functionality as in this video, you can basically switch two settings of the parameter the expression pedal controlls. Depending on the effect you could also switch between different tremolo depths, gain levels, modulation speeds etc.
@crissvis92044 жыл бұрын
@@looperwerk Amazing, thanks a lot✌️
@danielhartman50864 жыл бұрын
You keep the pedal. I'll take that PRS.
@gordontubbs4 жыл бұрын
This is cool.
@SuperJiggawhat4 жыл бұрын
This is a fun time to play guitar.
@ScttSt_vocals4 жыл бұрын
No, Henning. I don't need this :)
@TheElrondo4 жыл бұрын
Moin Henning, ich schaue alle deine Videos seit Jahren... Warum hab ich Dich eigentlich nie abboniert? Jetzt wirds Zeit! Thank you for all your effort. Grüße aus Franken.
@EytschPi424 жыл бұрын
sooooowas.... wird aber mal Zeit!!!
@yourfavcodplayer333 жыл бұрын
@3:09 this is the delay remix LOL
@elisanchez79654 жыл бұрын
Im wondering if it allows u to toggle between settings on a pedal that doesn't have preset functions...such as a hall of fame reverb
@looperwerk4 жыл бұрын
The effects pedal needs an expression pedal input, so this would not work with the regular HoFs, but for example with the Hall of Fame x4. A regular expression pedal sweeps one parameter from one extrem to the other, with this switch you can switch between two points of that parameter that you set with the red and blue knob. I hope I could help you, if not send me a mail ;-)
@chr15tree3 жыл бұрын
Does anyone know if this would work with a boss dd7?
@abradolfhonkler92874 жыл бұрын
That shirt is simultaneously the ugliest and most beautiful thing I've ever seen. I love it. And hate it.
@TomMilleyMusic4 жыл бұрын
This is very accurate
@joshiuahallenbeck5314 жыл бұрын
I'm waiting for Henning's clothing line
@Amber574994 жыл бұрын
Same goes with your name, Abradolf 😀
@abradolfhonkler92874 жыл бұрын
@@Amber57499 lol yeah, I suppose I have something of an affinity for things of a dual nature.
@rickc21024 жыл бұрын
Übermode
@ijahtom4 жыл бұрын
Hi 🙋 Henning! The 1st little 2knob pedal make sense to me but, the 2nd is totally not necessary in my opinion. Why should I connect an in between device if, I can pluck a pedal just direct in any position I eventually feel trying it!? Seen? Because you get to pluck in front or behind a pedal anyways. There for no need for the second device. Thanks for your presentation and greetings at the end of this commend as always. LOL 😁 LG. AnkuTom
@carlthegnarl4 жыл бұрын
Because you don't want to mess with cabling that you spent hours on perfecting just to quickly test a pedal. That insert box is also great for placing your fat Wah outside of your board but still having it somewhere specifically in your signal chain (like let's say after the fuzz).
@ijahtom4 жыл бұрын
Seen. Thanks.😁
@AnonymousBosch31584 жыл бұрын
lots of usage for that...
@RichieStormtrooper4 жыл бұрын
I just came from a video telling me "Watch this video if you grew up without a Dad". KZbinrs are getting kinda bossy these days! 😉
@qrtdaprince4 жыл бұрын
so it's a Dora pedal ? the red path or the blue path :-) ! lol
@tomvitti24154 жыл бұрын
Brother can u recommend me a semi hollow single cut flat fretboard (20” or so) guitar? Thank u
@EytschPi424 жыл бұрын
no clue, sorry
@geoffpatch82554 жыл бұрын
Epiphone Sorrento would fill some of your needs. I have one on the way.
@tomvitti24154 жыл бұрын
Geoff Patch going to check it, thank u
@maxupp4 жыл бұрын
oh wow, ich hab mir auch grad ne 2017er CE24 gekauft...
@rickc21024 жыл бұрын
So schön!
@Mujcanal3 жыл бұрын
I hope The Edge hasn’t seem this video.
@maxonlamb80634 жыл бұрын
That was PATHETIC...get it together !!! LOL.
@Syldar4 жыл бұрын
No.
@Starch1b2c3d4a4 жыл бұрын
No i dont
@EytschPi424 жыл бұрын
OK, you don’t!
@rickc21024 жыл бұрын
Die Luft der Freiheit weht!
@garysnowdon19184 жыл бұрын
A pedal with a knob that controls another pedal. Looks pointless