Sounds you can't get without this thing! EHX Tri Parallel Mixer

I had this thing on the table to test for a Thomann video and I just have to buy one and show it to you guys.
This video is NOT paid for by anyone!
EHX Tri Parallel Mixer at Sweetwater
bit.ly/2PGjqLl
Here is tons of stuff I use in my videos at Sweetwater
bit.ly/35pbJOz
Gear from this video at Sweetwater:
Two Notes - imp.i114863.net/9o5Xy
Here is tons of stuff I use in my videos...
imp.i114863.net/gd0RA
Current LIMITED TIME deals:
imp.i114863.net/c/2225674/796...
Here are some links to Thomann...
EHC Tri Parallel Mixer
bit.ly/2s9idTM
Tone King Sky King
www.thomann.de/de/tone_king_s...
Two Notes
bit.ly/2JjqtWY
CIOKS DC7 Power Supply
bit.ly/32KtxTr
Universal Audio Ox
bit.ly/2zuQg8Y
My voice recorded with:
bit.ly/2JmYNAh
Everything hangs on these...
bit.ly/2JBdct1
My interface: Apollo X4
bit.ly/2qIWjpC
here is a link to the AMPETE switcher:
www.musik-produktiv.de/ampete-...
NOW AVAILABLE - HP42 Shirts
teespring.com/stores/hp42s-we...
Here is my Reverb shop!
reverb.com/de/shop/hp42s-ware...
Link to my Patreon account:
www.patreon.com/user?u=4423533
Find seriously different sweaters here...
mrgugu.com
Use Coupon Code "EytschPi" for 15% OFF
Stuff I use...
www.amazon.co.uk/shop/eytschpi42
My interfaces...
Apollo x4:
u.audio/apollo-x4-eytschpi42
Universal Audio OX:
u.audio/ox-eytschpi42
Apollo Twin X:
u.audio/apollo-twin-x-eytschpi42
My sliders:
SliderONE v2 - edel.kr/5t
HeadONE - edel.kr/5u
SliderPLUS - edel.kr/5v
HeadPLUS - edel.kr/5w
Edelkrone Main Page - edel.kr/5x
"Make sure to pick up a digital copy of my entire discography, both published and unpublished, at www.therecordlabel.net/progre..."
Gear from this video at Sweetwater:
Two Notes - imp.i114863.net/9o5Xy
Here is tons of stuff I use in my videos...
imp.i114863.net/gd0RA
Current LIMITED TIME deals:
imp.i114863.net/c/2225674/796...

[@ebail8359]

This is one of those pedals people think are only utility based, but are truly key to unlocking new sounds and levels of control. Well worth the price of admission.

[@benbrucato77]

This thing is amazing. I love blending favorite overdrives, distortion, and fuzzes, especially ones that have very strong character that can be overbearing. Boss Heavy Metal, Proco Rat 2, and any kind of fuzz into a distorted amp, blending in the dry and backing off variably on the returns can yield the most amazing metal tones.

[@kenh5317]

As a bass player, this could be very cool. Keep the dry signal up and have a loop with a pog and some modulation, fuzz on another, overdrive on another. Especially in a power trio situation.

[@mathiasboni2686]

That were exactly my thoughts... I just ordered one

[@MultiCBU]

Exactly! You can also program the footswitch for the loope to be only before send. That means, you can have a looper in the loop and effects after the looper. You can change effects of the looping riff without effecting the main dry signal.

[@LunaticTheCat]

The possibilities are endless. The ability to run your pedals in parallel instead of in series like normal opens up so many new possibilities.

[@ooinvsaoo]

@@mathiasboni2686 how has thos worked out for u? I'm looking to do the same thing

[@benjaminvictor4996]

Old Blood Noise makes a 2 channel mixer (Signal Blender) with similar feature set, but this looks to have more line controllability. Signal Blender has a much smaller footprint and works well for my multiple line set up. Drives/sub into master, 2 lines: mod/rev; delay rev; out into stereo set up with trem/delay/rev. A palette of sounds to keep me occupied for months. Happy New Year!

[@colinjackson3662]

Bought it to use with my Boss SY1, EHX Mel9 & Key9 cos they sure don't like being stacked!! I used to run the dry out from the 1st pedal into the 2nd etc, but it's not easy to adjust on the fly. And now I've got a controllable and flexible synth rig. Endless possibilities 👍

[@rocketshiptoaltair]

There's an official EHX demo where they do exactly that with the B9, C9 and Key9. I have the Mel9, C9 and the SY-1 so that would pretty much be my reason for getting one as well. Great idea.

[@Trees_are_the_view]

This mixer is the bomb. I use the metal zone, pitch fork, and big muff going out to the digital delay to the amp. Just pure magic.

[@ME-ru4hv]

This is an absolute must for anyone serious about effect sculpting

[@TheJamesdavidmartin]

Very cool. I built my own 2 channel version of this 10 years ago and I've been waiting for a commercial version to come along. They've missed a trick though. I built mine so I can switch it from parallel to series in either order because sometimes you want to OD into your delay and verb. why didn't they do that!

[@bonesyard1491]

I want to be able to switch series of pedals, any recommendations?

[@scooter5005]

I bought one of these as soon as I could and use it every performance. It's great to have active sound on a pedal board. Happy New Year!

[@batcatstudios]

This demo is in AND mode which allows you to play different channels of pedals in parallel which is cool and useful in its own right. However I use this mainly in XOR mode which allows you to use one channel at a time which I find useful in breaking up a large pedal board into 3 smaller separate chains of pedals that vibe well together. Keep in mind you can add a series before it (tuner and preamp pedals for example) and series of pedals after (stereo pedals for example). There is tremendous bang for the buck to unpack in this pedal that is useful for live as well as studio settings.

[@JA-ww9cd]

Thank you for the demonstration. This pedal is exactly what I was looking for.

[@markbuhoveckey9903]

Great video, definitely some ideas in there that I didn’t think of. However, you missed some of the key features. You can change this between AND/OR modes. In AND mode, you’re correct that all the loops are in parallel. In OR mode, this functions like a pedal switcher if you are using pedals in the loops, like you’re setup here. Depending on the mode you’re in and how you have it configured in your setup, this can also work as an instrument switcher, or amp switcher. Lastly, I think one of the main purposes for this pedal is with bass guitar where parallel processing is much more common - overall let’s you use effects like distortion/wah/etc, but blend some of the dry signal back in so you don’t lose low end. This is quickly becoming the centerpiece to my setup.

[@oscarmorales-cn3hz]

Always bringing good stuff, THANKS!!!!

[@strangequark420]

You could chain multiple pedals in series in any of the loops too, yeah? That would make for some fun, as well. Great demo and explanation!

[@itsmeagain1745]

Throw in a few expression pedals on the pedals in the loops and knock yourself out! It should have an expression pedal on the Dry Mix knob as well to make it really useful. P.S. tap dancing classes would be handy... :-)

[@talkswithravens982]

Yeah, that’s the way I use it. I have multiple series chains of pedals, one for each loop. I just turn on and off different pedals in the chains. I’m thinking of adding another one since the possibilities are endless!

[@bluematrix5001]

this would be great with a Parallel/Series switch in each channel and a Mono to Stereo I/0 with panning in each channel

[@loveforallbxlmannif]

i propose to have a pedalboard in every loops !)

[@loveforallbxlmannif]

I really like parallel too. I use the boss es-5 that could do 1 parallel loop. The es-8 could do 2 but i don't like how the return send in this machine make it hard to place on a pedalboard.. I also use jhs splitter then palmer duetto for a constant mixed signal. For me every pedal must have a loop that could affect wet or dry signal !) I imagine a true spring reverb with fx loop.

[@lynetteaylsworth4739]

That's what I was thinking, I normally play out through six or eight amplifiers, with two or three pedals in front of each channel. Sort of the hard way, but its clean. These could be used for an ersatz road version of my rig.

[@colinjackson3662]

Absolutely agree, my approach exactly 👍 More in the main comments section

[@BruceWalker51]

This mixer really shines when you use 3 amps or tracks in your recording software.I'm using a key9.bass9 and a attack delay all EHX pedals with each pedal having a separate DI. So the possibilities are far greater.Like running parallel chains from the direct outs into more amps or into recording software.Anyhoo thank you for the the great video.

[@quendi6687]

I would say that there is a good solution for pedalboards, here you may want to run it in series or parallel depend on your mood, from the same brand, its name is Electro Harmonix Switchblade Pro. And the ability to change the order of serial loops is just awesome...

[@onlyusernameleft2]

I have a cheap line selector pedal that I use to make entire signal chains which I run in parallel. I can easily emulate the sound of 2 or more instruments. This thing is giving me a thousand ideas.

[@PeedarTragedy]

You only scratched the surface on the possibilities with this pedal! I’ve owned it for 7 weeks and have run multiple tests on it. Personally I use it to create my tone. I run a ehx silencer into a soul food, then into a cry baby before it. Channel one is a muff fuzz clone, channel 2 is a cock fight, channel 3 is a little big muff. I blend the tone of all 4 signals with the soul food driving all, then have modulation and time based effects in the loop of my amp. In a studio, I’d use it to power 4 high gain amps for rhythm tones. I created in my mind (and tried it at a store) a 4 amp wet/dry stereo configuration with this pedal that was mind blowing! There are so many possibilities! So, it belongs on a pedalboard if you want studio tone live. However, its studio possibilities are endless!

[@LunaticTheCat]

Have you been having any trouble dialing in the phase?

[@PeedarTragedy]

@@LunaticTheCat no, and each channel has a phase shift should that occur.

[@Mattbuchanan71]

Does it do stereo?

[@PeedarTragedy]

@@Mattbuchanan71 yes/no... it depends on how you run it and for which application. You can use it in a stereo setting, but it IS limited in the ways it can do that.

[@colincain7521]

Do you have any problems with humming or hissing noises when you activate all your pedals? I’m thinking it might be nice if they had built in noise gates into it.

[@PendelSteven]

Other things you can use this for: - several Foundation Overdrives (amp-in-a-box) parallel into a clean amp - several loopers as in Boss RC-500 and such parallel to have more channels of looping or to mute the drums etcetera - taming down tremeloes, flangers and other intense effects

[@paulblackman3936]

Happy New Year Henni. Hope you are celebrating.

[@HenriDeCarvalho]

Thanks. for you review...Was interested by it then put that aside when discovered the gigrig wetter box.

[@fredrodnick2881]

I was just wondering why I haven't seen any videos by you in a long time. The thing is I am so confused about this pedal as never before. Never the less, it's good to see you back on KZbin.

[@Luk4zguy97]

This is exactly what I've been looking for!

[@geekguitars]

I'm sold. I know exactly how I'll be using it! Thanks for the honest review.

[@LunaticTheCat]

I know exactly how I'll be using it too. I bought it to mix my Red Panda Particle and Tensor delays, but now I'm also thinking about what it would sound like to mix two preamp-overdrive pairs or mix two tone shaping boosts. Maybe I'll combine a chorus and phaser and see what happens. The possibilities are endless.

[@moetarded7757]

Use the Helix! Send to clean board stereo return on Helix. Send 2 to distortion board and returned to blend with delay and reverb on third board. Dirty to create second stereo image to return to Helix. Mix helix auto pan and phaser (stereo effects and pre amps) I use a splitter to run a dry distorted sound to an amp in the middle. So the re blend of distortion is inverted

[@kevinjtorres]

Good for bass to separate dirty from clean and also modulation... Nice review. Thanks for your honesty.

[@vassili87]

I think this pedal is ALMOST perfect for me. I'm looking to have different stage of distortion, but for my band needs it's vital my bass always have "Balls", no matter what other pedals I use, this way I can do that. But there's just one downside: the size. This thing is HUGE!

[@bookscheckmout]

Thank you for sharing this!

[@robertbrown6874]

All in one , check out the Mooer Ocean Machine, separately not as good as the high end products but all in one, reverb and 2 delays, series or parallel and stereo!!

[@jcollell]

Cool product and video. I was wondering if you could use this for your pedals in the FX loop to blend say reverb, delay, as well as everything going front of amp like your drives?

[@mantashaft]

I agree, I had to get this. So useful

[@mainsblanches8793]

YEP!!...definitely need this pedal!!...you can also, let's say, set-up two pedals per channel and tweek them on and off as you want to had even more combinations or textures, also, you can put an "A-B-C" switch (or a micromixer) in front of that pedal to send in different instrument signals!!...

[@Wagoo]

I would be interested in a stereo version.. I have a VFE Klein Bottle which is even more nuts as you can route pedals into each other. But pretty sure VFE shut down production, as it was a kind of hobby thing

[@richmonksgtr]

Wagoo I was just about to post this. VFE makes (made?) great stuff.

[@RedCarRecords]

What do you mean you can route pedals into each other. I was just about to look up the difference between those two pedals and EQD Swiss Things. I'm trying to decide which will fit my needs best.

[@Wagoo]

@@RedCarRecords like a send/return on a mixer with feedback levels.. so you can have things looping/feedbacking into themselves

[@RedCarRecords]

@@Wagoo Yeah, That's pretty big in my book! I've done some research and it looks like there is summer 2022 pre-orders in line for the VFE Klein Bottle. Is there any other pedal like the Klein Bottle that can also route the loops back into each other? I couldn't find any...

[@brentfox805]

This thing can be used as an amp switcher as well. You can also have a pedal that has stereo outs going into different channel ins or outs to create some crazy sounds. There are a bunch of possibilities for this, but, as HP said, it's robably more of a studio tool than a live thing.

[@callumleverton5412]

does it work like an ABY pedal for amp switching?

[@otherGuise]

I use mine in a stereo setup with a Boss Nextone and a DSL40. Cleans effect through the Nextone and explosions through DSL40.

[@guillaumelebayon]

Great vidéo, great pedal !!!!

[@papasmamas1]

I love to put effects on the dry signal, works for me this pedal.

[@stephenparry6811]

Layering sonics as opposed to pushing one into another this is an idea i have been thinking about for a while & at 130 pieces of whatever no point in making it myself....

[@MutethatBozo]

I can see where this pedal could be great fun in a studio, or for the home producer. Happy Holidaze! Animals at the end :)

[@joanesinu]

The best weapon to use in a parallel loop for wet only effects. This was a game changer to me. I use a delay and a reverb, both in parallel into a parallel loop, so they dont affect each other. With the amp mix pot, I blend both individually to the signal. The result is much more clearer. Try Delay+Reverb combo with both in parallel and you will never come back to Delay+reverb in series.

[@TheRealChrisLopez]

Gonna have to pull the trigger on this one, could run a fat mid scooped fuzz with a mid heavy distortion and a clean on top by routing it with a patch and turning down the dry or any combination of drives while maintaining the tone of each and avoiding the stacking noise floor. I'll find the room. Beautiful possibilities.

[@lorensteele2962]

Layering fuzz/drives is my main interest in this pedal

[@thelegendoftdis]

Great demo. I’m gonna get one too

[@joaonorte8535]

Bom ano de 2020! Greetins from Portugal.

[@mattgilbert7347]

That phase control is genius. The drive+2 delays is legit wet/dry

[@martinclayton7260]

I bought one, and it's very useful!

[@steveg219]

The phase is critical because MANY guitar pedals reverse the phase of the original signal , for this to work in parallel you need to be able to correct for that

[@MrKadidle51]

So I could use this as a stand in for a loop switcher? Plus get the functionality of all the extra control

[@PooNinja]

On a fly rig no On Pedal board maybe? On the desk DEFINITELY! Maybe even a pair of em in series 🤘🏽🤘🏽🤘🏽 Because physics!

[@falschnehmung]

... I'm a fan and bought 3 (!) of those right away day 1 the thing was available (from Thomann ...). Concerning size: I hide mine UNDER my (homemade) pedal-board - BUT I have 3 volume pedals at my feet - for sweet sweeps in and out - de facto i have 4 : 1 for the dry signal (splitted by LEHLE) - that the 2 chain meet again in my Fender - allowing 2 inputs. YES, STEREO would be great - I bet that we will see this in the near future. For the time being, I'm using 2 of these guys (in the studio ...) ... EVEN cooler would be to drive the thing via expression pedal - instead of volume pedals - less cabeling ... For me, this is THE TOP GEAR of 2019 - fuc...ingly simple, cheap, reliable, and lots of options ... and amongst all: PARALLELISM to be discovered :::

[@LunaticTheCat]

The price is unbelievably good. If they charged $250 for this pedal I wouldn't have questioned it.

[@morsomarso9626]

Best demo of this pedal by far! Question: if I would use tri parallel for blending my old Electric mistress , could I fix the volume drop with this parallel mixer? I'm not sure if it's the send knob controlling this parameter.

[@morsomarso9626]

Can you please answ my question?

[@Mattbuchanan71]

Hey man, love your videos. Do you know if this thing does stereo? Like with a trs cable? If not know anything that will?

[@TheChristafershawn]

This is very similar to the electro-harmonix switchblade pro. The switchblade only has two effects loops but can be switched from parallel to series and reversed if desired. I was on the fence which one of these two pedals to buy but I read a few negative reviews of the tri parallel malfunctioning but maybe these issues have been remedied. Electro-Harmonix definitely my favorite FX manufacturer these days.

[@jamesprisciandaro3144]

Hey, what do you use to interface/switch between your amp heads? I have a dozen amp heads that I'd like to pair with/switch between 4 cabs, and I'm at a loss as to how to do so!

[@alexhutchesion4562]

I have this pedal on my board... It amazing... It got more options the u didn't speak about... SPECIALY IF U WANT TO MAKE U RIG MONO STERIO... U CAN ALSO USE IT AS INPUT OR OUTPUT.. OR LOOP MY RIG IT AROUND THIS PEDAL .. I love it

[@davidschaer]

MONO STERIO... sounds like the perfect college metal band... 😁

[@a-mb9373]

how would i use this with a Electro-Harmonix Super Switcher Programmable Effects Hub

[@martypello7870]

Wow you can actually just send 3 dry signals into each channel and adjust the EQ for each and then blend them. Basically it's your clean tone in 3 different EQ settings then stacked on top of each other for a really nice tone

[@richardbeck1617]

Is this not similar to a Boss line selector? Which is a great pedal for mixing sounds.

[@astorina]

One question/reamark... Can you use one channel/switch looped on, itself with the clean sound.. this means that you can blend the clean signal and control its presence or not with the foot , is that a good idea ? Thx for the video

[@Veveve1]

whats the noise floor like on this pedal

[@alexabdulkader7423]

I'm running a Mesa Boogie 2 Channel Amp with a parallel effects loop. The results routinf the modulation effects in the parallel Loop is disappointing.(4CM). Could this be a possibility to Mix only the wet Modulation sound in the parallel loop of the amp?

[@ravenslaves]

This has been my basic set up for 30+ years. But this pedal would simplify my set up beautifully and probably do a better job.

[@bigbadbabybear]

can anyone tell me how the EQ knob works? is the a low pass filter to the left and high pass filter to the right?

[@TheAtheistworld]

So u can mix all three loops and original dry signal into one? 4 into 1?? Right? Thnxx brother ❤

[@PM-yz8fx]

I am looking for one of these, but stereo, that doesn't cost an arm and a leg! But there is no such thing in the market. Great demo as usual!

[@josephlara2339]

to run three parrallel chains ive been tossing up between the EHX Triparrallel mixer vs an ABC Swticher like a Lehle 1at3 sgos with a passive mixer at the end. What would be better?

[@sundrenched6248]

Nice! Thinking of getting this to make an analog tri-stereo chorus on the cheap. Already got 2 vintage Boss CE-2B for about $50 each, so $300 total would do it.

[@123Andersonev]

Best thing to do with that is stack 3 drive pedals with eq followers and sculpt the dirt before slamming it into the front or chuck the input, output into an effects send and return to switch modulation sources post preamp.

[@jamesbeylik1]

Great for recording. Setting up 3 fix chains.

[@nicolasl2915]

Nice ! Can we use it to switch on 3 amps ?

[@pangea2003]

is this mixer pedal converting the signal or is it a full analog path?

[@giorgossmirnis4199]

Hello, when it's "OFF" (all leds turned off, 2:13), is it "TRUE BYPASS" or just shut down-no signal? If it is the first case ("TRUE BYPASS"), do "MASTER VOL" & "DRY VOL" work? Thanks!

[@thecolorhero1078]

Thanks. Happy2020.

[@ramona.vargas7298]

They need to extend this beautiful machine...

[@jounikorhonen]

In a studio, wouldn''t it be possible to route that stuff parallel with a small -footprint mixer? With the added bonus of panning and stereo? ...

[@stefan1024]

This is basically a mixer, but most small mixers don't have 3 send/return loops.

[@djangomclear_rocks]

Love the shirt

[@quinnmaloney3113]

I’m brand new to playing guitar, is this a good pedal to start with? And ranges from different types of sounds? Great video!

[@EytschPi42]

no, this pedal doesn’t really make any sounds on its own

[@toddleach1108]

I was thinking that the input signal could be split before this mixer pedal with one leg of the split to this pedal's input (with the dry knob all the way down), and then send the other leg into the return of the first channel. Now you loose 1 "loop", but you gain a button to tap the clean in or out with the other two loops. Also, one could use the loops as two separate sound "scenes" where one loop is a complete sound comprised of many pedals, and the other loop is a different sound pedal collection. Of course then maybe they wouldn't sound good in parallel... Also, I know a lot of people like to run two "amps" for different textures. This pedal could run two "drive" sounds for combined texture. Think of one loop "amp" drive on OD cleanish, and the other loop on a fuzz or Dist. Stacked they would be a mess. In parallel, they offer a combined texture. The obvious use out of the box would be: loop 1 to OD chain, loop 2 to Distortion chain, and loop 3 to modulation (providing clarity to them). The buttons are close enough together to allow you to stomp loops 1 & 2 simultaneously to "switch" between them if one is already on. In the same way, both could be activated / turned off with a single fat stomp.

[@captnb8036]

what is the artist and track that is playing as this video ends ???? does anyone know ???

[@bardkzen]

se pueden usar los "send" para salir del pedal con la señal hacia 3 amplificadores? obviamente sin usar los "return" como el "switch blade" pero para 3 amplificadores

[@lordundhimself1310]

Si

[@anonymous_friend]

What do I need if I want to mix my dry signal with a couple of Stereo fx in parallel?

[@johnbehan1526]

One route would be to look at the better digital multi-effect processors, I'm pretty sure they can do complex parallel effects chains now. If you're like me, a wires-and-boxes guy, I think you're going to want to split your signal into three parallel chains and get a proper mixer at the end. I'm guessing your fantasy rig is combining a lot of wet effects. That is going to need lots of tweaks, just to set it right for the room it's in; you're going to want that fine level of control. I do mono parallel for my bass with a cheap level-only mixer, and some cheap disposable Behringer EQs. Not pretty, but very tweakable. I was going to do stereo, I but I got a virus in my right ear so I'm learning to appreciate mono, lol.

[@korryramone]

Love this thing but I'm waiting for a stereo version

[@nodrog5150]

Hi HP42 I have the 8 channel Joyo switcher with the send and returns the same as on the EHX Tri pedal. Is the Joyo doing the same thing in a Parallel universe or if not why not🥳 cheers😁🇬🇧👍

[@EytschPi42]

no, it does something very different

[@sandyturner1911]

I use it for parallel looping, and I use one loop to send a signal to my Katana 50. So, I have 3 amps running. I have a Orange mico dark, and a old Crate head, running in stereo., with a JHS switcher. I run a Boss SY1 running in one loop, and I'll be putting the Plasma Coil in the other loop. It's basically set it and forget. it, for me.

[@MYGAS21]

I have been using parallel sonic alchemy for some time know....(I mean creatively combining sounds from various pedals to get the sonic tecture I need or having the delays playing a completely different texture ) but I had to use a combination of pedals. (I would insert a small switcher between my fx pedal and my main switcher, and pull out parallel lines towards a mixer) ....But ,,,This saves alot of space. ...And I think it can be used even on a medium pedalboard for a gig.

[@swamplifecontrol]

You might want to look into the Boss LS-2 - Can be configured as a 2 loop mixer. a 2 loop switcher, or a 3 send switchable splitter, about $80 used.

[@MYGAS21]

Yes bravo, I AM using it, and some other tools that allow me to brake out a parallel line without necessarily having to brake the linear path of the main switcher. The EHX blade comes to mind: I use it's tuner out to go to the mixer. The BOSS LS-2 of course...what else...mm....Oh! the OYROBOROS by BRIMESTONE is another!.....it allows me to mix the highs of one signal with the lows of another....that is very ...lets say alchemic? Thanks and have a good year!

[@swamplifecontrol]

@@MYGAS21 Haha - Great minds think alike - here's another tool I just added. reverb.com/item/26863224-art-headamp-4-headphone-amp

[@swamplifecontrol]

@@MYGAS21 And this with switchable loop order ! reverb.com/item/30720843-one-control-salamandra-tail-3-loop-programmable-switcher

[@stan_likes_single_coils]

This T-shirt. Everything else isn't important right now.

[@johnjames-hq3ye]

lmao

[@jamesprisciandaro3144]

Link to purchase?!?!?

[@johnjames-hq3ye]

@@jamesprisciandaro3144 i hope this helps you out. www.sweetwater.com/store/detail/TriParMix--electro-harmonix-tri-parallel-mixer

[@Briansgate]

Hi Henning! Still waiting on you to show up at my house to hand me 3 guitars to try out...... I'm from the South, I laughed when you said 'takes up spice'

[@lovelyhorse]

Anyone know of a stereo pedal like this. Looking to use for stereo delays in parallel. Something easy to set and forget.

[@junkshopaudio5284]

Two Tri Parallel mixers-one for the left channel and one for the right channel.

[@heartofodds]

And your output doesn't have to include the dry, clean, tone. You could have what you normally think of as your core tone but only in the first loop, and add on top of that whatever, but without stacking. And you'd still be able to turn the dry up if you wanted only light break up for instance. Instead of lets say running your core tone into the input. I know, obviously, but you start realizing this thing has so many possibilities.

[@heartofodds]

And what about the interplay of clean and distorted as a form of low gain. Low gain has clean in it, but in this case you might be able to add a good bit more distortion which when mixed with clean may still have results more similar to 'low gain.' I know, not new. But this makes it more accessible to people anywhere, anytime.

[@mattwesthaver6909]

Very cool, never considered parallel delays

[@TheFarout69]

I just need a stereo splitter/mixer pedal so I can mix stereo delay with stereo reverb. Should be out there but I guess I'll sort it out with a soldering iron and some opamps.

[@GlennMichaelThompson]

One of EHX's Switchblade pedals may suit your needs. There are a few different models of it.

[@McSlobo]

You can use this as a perverted multi-input kind-of-a re-amp box. Just route your signals into RET inputs, then put your effects after OUTPUT, re-route it back to INPUT, and use SENDs as outputs. Just have DRY VOL at zero (unless you want feedback) and you're good to go. At the moment I actually connected line level stereo output from a PC to RET 1 and 2, and my guitar to RET 3, and I output dual mono channels from SEND 1 and SEND 2. Not sure about the audio quality though but I can tell you music doesn't sound very pleasing through a klon clone.

[@BryanDenham]

@ EytschPi42 anyone that knows will this pedal work for me? i want to use a reverb and a Delay pedal running in the input and output of this pedal , three different amps loop send and return to this pedals three different channels . and then select what amp has the FX in the loop? or does it not work like this? thank you for the help.

[@EytschPi42]

no, it doesn’t work like that, sorry

[@christianpucciarelli]

Cant you do this with a Cheap 3/6 channel mixer even stereo?

[@illegal_space_alien]

Agreed. The lack of steteo outputs on something like this seems like a huge oversight, and a dealbreaker. 4+ channel Behringer mixers are $60 every day on CList.

[@djangomclear_rocks]

that sweater is rad

[@lorzfunk]

you can pull off the edge/u2 tones with that!

[@unpaidintern5331]

can‘t you just do sort of the same with the ES8 when having a delay go parallel to your distortion circuit? true, the ES8 is much more expensive but i bet it is much more common on your usual pedalboard. and flexible. it has no volume control, that is true, but your pedals usually have an output master.

[@justinduma9091]

Why don't you support VFE Klein Bottle which is the same thing but better. Peter is such a great person and made this before the Tri Parallel mixer, strange how EH came up with this after he produced his...

[@EytschPi42]

Peter is great... he knows where I am, I‘ve worked with him before... of he wants a video, he will surely contact me.