I work every day with impact bits all day long because I repair tools for a living. I use Torx, Allen head and a few flat and Philips as well. The company I work for sells Makita products and we are an authorized service center for Makita as well. Needless to say, I have virtually every brand of bit in my tool chest and I can honestly say that the Makita impact bits are by far the most durable and most have superior functionality. I don’t say this because we sell them, because we also sell and service DeWalt, Milwaukee, and Bosch we service a total of 16 name brands of tools and I have used them all extensively.
@Johnwickpifpaf Жыл бұрын
Do you have wera diamond bits, pb swiss bits, wiha bits?
@mikezador3 жыл бұрын
I tried Milwaukee, Bosch, Dewalt, Ryobi and Craftsman bits before I see your video. Today I bought Makita 35 bit set. All others going back to store. Thank you for sharing this video!
@ToolReviewZone3 жыл бұрын
Awesome, thanks for the feedback Michael!
@playtothebone4 жыл бұрын
Just got the bit set yesterday and it bothers me that other companies sell bits that don't fit anywhere close to as well. Feel like I've been ripped off my whole life. That's how good these bits are.
@flashgordon62384 жыл бұрын
That test of the XPS bit and Phillips screw interface holding the drill driver at 3:50 had me sold. Nicely done.
@saturdayshanks37534 жыл бұрын
Yeah I bought these when I picked up my XDT14. They’re awesome. My buddies were blown away when they tried them out so they went and bought some too. Lol
@geoffstrickler4 жыл бұрын
Love my Milwaukee Shockwave bits, but I’m seriously considering getting some of the Makita XPS Phillips bits after seeing your video, and VCG’s. I’ve seen Phillips brand do such a demonstration, but it required their new screws AND their bit for it to work. Makita did it with just the bit design.
@ToolReviewZone4 жыл бұрын
I really don't think you will go back bro. These are truly awesome bits👊
@geoffstrickler4 жыл бұрын
Tool Review Zone the one where you completely buried the bit was pretty amazing too. I’ve seen overdriven screws before, but I’ve never seen anyone bury a 2” or longer bit. I hope they didn’t make the same mistake as Milwaukee did with the Matrix bits. Hope they learned from Milwaukee’s mistake and aren’t repeating it.
@vinnygoombatts14584 жыл бұрын
Wow very impressive. I always just use cheap bits, because I don't want to lose the expensive ones, but I guess I'm gonna get some Makita bits, amazing!
@dougwhitt684 жыл бұрын
Bought the Phillip's #2, 2" 3 pack today. Best fit I have ever seen in any bit, regardless of price or brand.
@ToolReviewZone4 жыл бұрын
Yeah, they are pretty awesome. Thanks for the feedback bro👊
@AntonioClaudioMichael4 жыл бұрын
These bits are pretty impressive
@JJ-lu6mg4 жыл бұрын
They look super nice, I’m going to pick some up today. That’s crazy how the drill didn’t fall out off the screw thx bro great review 👍🏼
@ToolReviewZone4 жыл бұрын
Let me know how you like them JJ!
@JJ-lu6mg4 жыл бұрын
Tool Review Zone I definitely will I just grabbed the kit at the Depo with a few other accessories with it.
@VCGConstruction4 жыл бұрын
I know Henry Phillips is looking down on this video and smiling as much as we are, thanks for the shoutout CUZ!! ooooooooooooooohhhhhhhhhhhhhhhhhh!!!
@ToolReviewZone4 жыл бұрын
Haha, you got it brother Ohhhhhhhhhhhhhhh
@harleywood724 жыл бұрын
And Peter Robertson is saying " welcome to the club". Kidding aside, these bits look amazing. Hope they're available in Canada.
@GrzegorzKr10 ай бұрын
Look what Vince from VCG doing with Ryobi bits. He turned impact driver with Ryobi bit almost upside down. That was amazing.
@ToolReviewZone10 ай бұрын
His name is Vance
@jettschenker2 ай бұрын
Yeah that little novelty trick sure will get a lot of work done... Not
@JJ-iu5hl3 жыл бұрын
I'd probably keep some worse fitting bits on me. When I'm tearing out old work and there are a lot of screws, I actually like a worse fitting bit so I can just flick my driver to the side and throw the screw on the floor to sweep up later. Makes demo a little faster.
@AngelMartinez-me1bf4 жыл бұрын
Best bits I’ve ever used for them first week they come out
@PerryCaulkins4 жыл бұрын
I use the shockwaves and they have been better than any other bits. I will try these out though!
@ccbowers9 ай бұрын
Shockwave cases are annoying. Especially for narrow bits and twist drills, you might rip your skin off before the bit releases. I like the Milwaukee bits themselves quite a bit and have a couple sets, but I won't buy them again for that reason. I do like the Makita XPS better overall. Fairly similar design to the Milwaukee, but slightly better finish and much less annoying case
@ironmantooltime4 жыл бұрын
More impressive than my wife's bits
@billlee17244 жыл бұрын
When your on lock down but Home Depot is still open because they sell essentials so you go out to get some xps bits to play with #6feetapart 🤣🤣🤣🤣
@ToolReviewZone4 жыл бұрын
Haha
@ADE23664 жыл бұрын
Bill how did you know you we’re 6ft apart ?, did you also buy a tape measure 😂👍🏼
@jimmymac6014 жыл бұрын
I may have seen you there.
@brucecarkuff5214 жыл бұрын
Our home depot has barricaded the parking lot and is only letting 100 people in at a time. Lol!
@TheKUZ3 жыл бұрын
I bought 3 sets of em just bc i liked them so much.. idk how you can really beat these (for the work that I do)
@squarebodySpringman4 жыл бұрын
I agree. I got these and love them. best fitting bit ive ever used.
@samjones38754 жыл бұрын
Not all Phillips screws are exactly the same. Button head sheet metal screws for instance, wouldn’t hold an impact like that. If you only use deck screws or drywall screws these tips look great, but they may not be the best for every application.
@KNACKSKILL3 жыл бұрын
Nice and strong bit, can hold the mother compact driver, nice one!
@michaelc72834 жыл бұрын
Wow, impressive. I will check them out. Thanks for the video and update on these bits
@ToolReviewZone4 жыл бұрын
You got it brother 👊
@ckone6714 жыл бұрын
Makita is top of the line! in my opinion.
@mainsource80304 жыл бұрын
they redesigned the magnetic ring as well, now it sits toward the end, but you dont always need it, i cleaned out my home depot, this is what the milwaukee matrix carbides should have been
@tukkus22 жыл бұрын
Just ordered a nice set. Thank you
@Lone-Wolf874 жыл бұрын
I need to go to Home Depot.
@bluemantom774 жыл бұрын
Wow blown away I need to try a set
@ToolReviewZone4 жыл бұрын
They are really good bro, just watch out for the Gnome!
@amoscardoza52534 жыл бұрын
Yo TRZ! I'm going to have to give these a run! Great vid! Stay safe brother!!
@ToolReviewZone4 жыл бұрын
Thanks brother and you too my dude👊
@arelectronics46394 жыл бұрын
One of my favorite Bits
@drixom98054 жыл бұрын
I do a crapton of tapcon installs bought a set last week i have broken 5 tapcons with these bits. With my milwaukee shockwaves the bits break first.
@ToolReviewZone4 жыл бұрын
Wow, cool feedback. Thanks
@MrRubenrivera96494 жыл бұрын
the velocity screws the bits that come with them do the same the drill and impacts hang on the screws as well and r driven faster than any other screws
@pjseiber27744 жыл бұрын
Hey Thanks I'll have to try these.
@XD45OWNER4 жыл бұрын
I'm sold on the bits for sure, and like you I can't stand the Phillips, I go for the T25 but hell I'll give the phillip's another shot now, pretty good timing too since I been switching my lineup over to Makita and Milwaukee
@bblwarrantydepartment9814 жыл бұрын
hope Vince stays safe he is in Hard hit Bergen county NJ!
@jt3d8673 жыл бұрын
Are the screws Phillips or Posi drive. My experience with Phillips is that the cam out too easily.
@josephmalinowski68174 жыл бұрын
All joking aside that is a very nice looking #2 bit
@AntonioClaudioMichael4 жыл бұрын
Great video Clint Bro
@ToolReviewZone4 жыл бұрын
Thanks brother 👊
@goatsonapost3 жыл бұрын
Anyone know why the xps bits are hard to find? I’m in Canada and literally no stores carry them.
@jeffcoolhd4 жыл бұрын
What's up Makita Man I want to go buy some of those bits right now but I can't till the coronavirus is gone. I was wondering did you get the new magnet with your kit. I always love it when you do videos on Makita tools. Peace brother
@ToolReviewZone4 жыл бұрын
Hahaha, I know you do brother
@raptordan68514 жыл бұрын
They are good bits however I prefer the new Milwaukee shockwave impact duty , they are damn near indestructible.
@danielsimchuk75624 жыл бұрын
Have you tried both
@daveishywood7824 жыл бұрын
Ha burning them fingers on the screws . Just to add I never use Phillips screws only on dry walls which do grip ordinary Philips bits . I’ll carry on using my pozi drive thanks 👌🏻👍
@hammerheartdan63114 жыл бұрын
I might try these! I love my Milwaukee tools, but the shockwave bits are horrendous....
@danielsimchuk75624 жыл бұрын
Lol just bought some yesterday might go return them
@brendanmartens7774 жыл бұрын
I'll have to try these to
@alyusmuse38394 жыл бұрын
Well... I AM BOUGHT BY THIS AD!🤯
@marvinm.76342 жыл бұрын
why is there no pozidrive (PZ) for those? As it is superiour to phillips, i dont understand why makita does not have them in PZ.
@Countrysidewonderer2 жыл бұрын
Why is it sticking to the screw such a good deal wat about wen you want to get it out of multiple screws fast ? Not so handy then. What is important is how long the bit lasts so how strong it is for heavy work.
@bricofast4 жыл бұрын
For me the best is Wera bits 👍👍👍😁😁😁
@ToolReviewZone4 жыл бұрын
Wera is the only other one this would work on
@josephmalinowski68174 жыл бұрын
I use to say that as a teenager please just the tip lol
@ToolReviewZone4 жыл бұрын
Hahaha
@justinmansoer43854 жыл бұрын
😂 Made me laugh dude, good times
@taunokekkonen57334 жыл бұрын
Just the tip, and only for a minute!
@V0YAG3R3 жыл бұрын
Joseph Malinowski That's what your mom said! 👌🏻
@josephmalinowski68173 жыл бұрын
@@V0YAG3R if you don't answer you are a bitch
@jasonbabila60064 жыл бұрын
How about a torque test to see how much torque it could withstand before shattering?
@ToolReviewZone4 жыл бұрын
I'm going to see if I can come up with something like that bro. That's why I put that clip from Makita in the vid, but not sure what other bits they used in the testing
@jasonbabila60064 жыл бұрын
💪🏽
@richardwagner2824 жыл бұрын
Are these bits diamond coated for them to be able to stick to the screw heads?
@bblwarrantydepartment9814 жыл бұрын
i am happy these came out cause i got the makita golds for $9 baby yayyuhh
@ToolReviewZone4 жыл бұрын
Lol
@username21923 жыл бұрын
is it possible to use these bits with Hammer drill also ?
@kentuckybeardsman3 жыл бұрын
Best bits out there. Truly are. I have so many of these it isn't funny
@stevennihipali36074 жыл бұрын
K, I'm not gonna lie... that's pretty fucking awesome. Any bit that'll hold in place a battery operated...
@jesseallen41844 жыл бұрын
Cool video. Shame they aren’t available in Australia or even on Amazon.
@jgm37964 жыл бұрын
They seem great. Looking for an excuse to go to Home Depot. Quick question: Where are they made?
@ToolReviewZone4 жыл бұрын
Probably Japan bro. I'm not 100% sure but most of their stuff is made there
@Riley_Babe4 жыл бұрын
@@ToolReviewZone Hope so, cause "Made in China" died for me, actually!
@Intarsia824 жыл бұрын
I bought a 45 pc XPS set today at Home Depot. Can't wait to try them. Made in Taiwan. I have an Excalibur scroll saw made in Taiwan. They make good stuff.
@unitwoodworking54034 жыл бұрын
thanks for useful tips, awesome and nice~
@ToolReviewZone4 жыл бұрын
You are very welcome, and thank for the awesome comments unit👊
@unitwoodworking54034 жыл бұрын
@@ToolReviewZone 👍👍
@TomSommer4 жыл бұрын
Now those are cool.
@MrRubenrivera96494 жыл бұрын
have u tried the velocity screws their bit does the same even upside down bro it hangs upside down the drill does
@flyfliker4 жыл бұрын
Makita rules
@AntonioClaudioMichael4 жыл бұрын
Need to pick me up some soon
@ToolReviewZone4 жыл бұрын
Yeah they are pretty awesome bro
@Lacoste92774 жыл бұрын
I dont think canada has them yet. I just checked the home depot website an nothing in my area.
@ToolReviewZone4 жыл бұрын
Should be soon
@jesterraj4 жыл бұрын
whats the brand of the screws?? the T25s
@williamjuchnewich7644 жыл бұрын
How about hardwood? like IPE?
@brutus18084 жыл бұрын
Can't find these in the UK wanna try them just can't find them at all but we use pz2 here so probly ain't made then yet for the UK buyers so I'll stick with the milwaukee shockwaves for a bit till I can find these
@ToolReviewZone4 жыл бұрын
I was literally only able to get my hands on them today. Should be heading your way soon bro
@possibility28able2 жыл бұрын
They're alright. They wear relatively fast and then they cam out quickly. Any chance you can demo the wera diamond coated Phillips bits?
@joshuaramos96764 жыл бұрын
Which impact bits do you think are better and I don’t care about price Makita XPS or Milwaukee Shockwave
@GaryGiffin494 жыл бұрын
These bits are not at the home depot in western Canada
@ToolReviewZone4 жыл бұрын
They should be soon Gary. They just hit the stores here
@outhouse94514 жыл бұрын
But how bad is the wear on the bit compared to others?
@jcortes39304 жыл бұрын
I tested to see if these could hold the ex wife and they worked!
@ToolReviewZone4 жыл бұрын
Hahaha
@JJR14764 жыл бұрын
Awesome.....👌👍
@taunokekkonen57334 жыл бұрын
The real question is..who still uses Phillips? Torx for teh win.
@andyhuang75263 жыл бұрын
How much for this set?
@zeckham1004 жыл бұрын
How soft it the wood
@leotejada49364 жыл бұрын
I want it.... Do you know when they Will be in México ?
@ToolReviewZone4 жыл бұрын
Probably soon but I don't have a solid date bro
@pdubs70693 жыл бұрын
I snapped 3 doing regular applications, maybe I got a bad batch!! Very disappointed!! Oh & the ones that snapped were the PH2
4 жыл бұрын
Seems not yet available in Europe. 😫
@1200gs10004 жыл бұрын
Can't find them in the UK yet😥
@davidboyle94024 жыл бұрын
Why cant you get these in the UK
@randyhunt15813 жыл бұрын
never buying another Makita product after buying their bit holder that absolutely sucked.
@gardenjohn16 ай бұрын
Unbelievable !!
@RayofallTrades4 жыл бұрын
The buy here link is not working for me
@ToolReviewZone4 жыл бұрын
Thanks for the heads up
@sandymackenzie27754 жыл бұрын
Where can I buy these bits
@TheDoosh793 жыл бұрын
No PZ2 bit??
@joehall26334 жыл бұрын
I tried to do this with my 12volt Milwaukee impact and it didn’t work at all, Didn’t even feel close to holding the drill up. I Must’ve been using the wrong screws.
@jumper2334 жыл бұрын
Joe Hall I did it with several different bits,all #2s and 10 different kinds of screws couldn’t get it to stay once. Good bits nonetheless. The gimmicky thing I couldn’t care less
@ToolReviewZone4 жыл бұрын
Hmmm, all I did was grab some of my general purpose screws from the box and it worked good. Works best just after you tighten it and let go of the trigger
@SuperCano19974 жыл бұрын
Haven't had any issues with my shockwave.
@karlnorman24274 жыл бұрын
OK. Test these on stainless hinges using stainless screws. They'll snap!
@anoldocastro47924 жыл бұрын
The best
@douglasthompson27404 жыл бұрын
I do like my Makita impact driver but their bits have always sucked! So these new ones would have to be a huge improvement to be equal to the DeWalt or Irwin ones. They have always had softer steel which wear out very quickly and aren't that great out of the box while still being one of the more expensive brands. Check out Project Farm he found out pretty much what I have experienced when testing bits. I still wouldn't buy a phillips fastener if given any choice even if the bit could continue as you show. Torks or Robertson are far far superior and hold a driver even when it is a bit worn. I am not even a fan of the 'Japanese phillips' which are very different from the normal ones. They still cam out under load.
@philiphellier1034 жыл бұрын
Any screwdriver bit could drive a screw to a bit of softwood.
@TheRsixpilot2 жыл бұрын
The best till you use Hilt bits
@amoscardoza52534 жыл бұрын
Yo TRZ!!
@ToolReviewZone4 жыл бұрын
Famous Amos!!!!! What's up brother 👊
@billwebster7594 жыл бұрын
90% longer is not 90 times longer. It means almost twice as long.
@martinvanzyl7474 жыл бұрын
I don't think those are phillips. I think they are pozidrives. Check them. Phillips are marked: PH and Pozis are marked PZ
@kuehnel164 жыл бұрын
Like Butta
@konamanstudio24474 жыл бұрын
😎🍻🍺
@p.c.rpendyala90443 жыл бұрын
Show demo, on hardwood surface. I challenge, you will fail.
@Blue-pr7hu4 жыл бұрын
These aren’t that great. I went and bought some put them to work the next day and within 10 Seconds the tip broke on me! I’m sticking with my Milwaukee bits...
@ToolReviewZone4 жыл бұрын
Wow really. Yeah, if that's the case stay with what works bro
@Zozo8064 жыл бұрын
looked them up in european amazon. 50 bucks for 4. No thanks
@paulozabalotnicu18974 жыл бұрын
only problem with makita is the battery
@wayneo73074 жыл бұрын
Very Good , But Milwaukee Shockwave Are Better . These Makitas Should be Magnetic ! Milwaukee Are . Fit is About the Same .