If you use Dewalt tools this video may upset you

  Рет қаралды 37,131

Tool Review Zone

Tool Review Zone

Күн бұрын

Пікірлер: 125
@ToolReviewZone
@ToolReviewZone Ай бұрын
All products shown in this video are attached to the shopping bag located on the bottom left of this video
@melinda5777
@melinda5777 Ай бұрын
The Router! Please😊
@mos8541
@mos8541 Ай бұрын
i am a many tool brand, mainly dewalt user, but i dont get upset at anything really , except when i have to visit relatives in siberia.. i mean the great lakes...
@AlexGuo-28
@AlexGuo-28 25 күн бұрын
For the impact driver that you have that doesn't work, try taking the battery out and holding the trigger (fully pressed) for 15-30 seconds. Then put the battery in and try again. *effectively power draining the tool
@robertdascoli949
@robertdascoli949 Ай бұрын
I hope this video gets enough views so you can afford heat in your garage
@ToolReviewZone
@ToolReviewZone Ай бұрын
@@robertdascoli949 me too!!!
@Coachgraham614
@Coachgraham614 Ай бұрын
😂I
@mikethomas3069
@mikethomas3069 Ай бұрын
Buy one of them diesel heaters cheap and work with used oil and diesel mixed.
@yrrek1983
@yrrek1983 Ай бұрын
I felt cold watching it, and I'm in the Caribbean
@orangetruckman
@orangetruckman 28 күн бұрын
Just move faster to generate more heat 😬
@731Woodworks
@731Woodworks Ай бұрын
Great job. LOVE that router. By far my favorite router I own. It's "real nice like"
@effervescence5664
@effervescence5664 25 күн бұрын
Okay what is the orbital function on the recip? I rarely use either of my recips but I am curious to know so I can look out for it in future.
@vaulmoremack3072
@vaulmoremack3072 21 күн бұрын
try changing the batteryon the impact ..... mine only works with my 9ah flexvolts it just spontaneously stopped working with the smaller ones
@heatheldridge7127
@heatheldridge7127 Ай бұрын
When I was choosing brands a few years ago, I found dewalt confusing. 54v, power detect, etc
@landshark218
@landshark218 24 күн бұрын
Nominal vs maximum voltage. And it’s all beyond simple to understand
@adambomb7331
@adambomb7331 Ай бұрын
I think they don't add the orbital for the same reason Milwaukee has 2 levels of Fuel sawzalls. The Fuel Super with orbital, and Fuel without but smaller & lighter. So not every other saw has it, due to trying to minimize size. I think showing a comparison against orbital & non-orbital would should be shown.
@sv-et7gq
@sv-et7gq Ай бұрын
I completely agree with you on the recipe saw. I'm glad they made a new one but it's missing a lot of features found on more modern saws. No orbital No adjustable shoe No rafter hook No variable speed dial
@sethzimmerman6346
@sethzimmerman6346 Ай бұрын
Right.
@jp6975
@jp6975 24 күн бұрын
A "recipe" saw? That's what I need to get through the wife's cooking! 😅
@Aepek
@Aepek Ай бұрын
10:50 best thing about plunge base compared to other brands…..how easy it’s to lock in place & unlock w/o moving hand from left trigger grip as just flick lever w/ thumb or finger……& I only own 4 DeWalt tools; but that feature it has wish all other brands had that ease of use, b/c they do have lever but brand I have I must left hand off grip or use opposite hand to lock, also, just feels nice. Do prefer diff brand router, but this about DeWalt ☺️ Edit: reason why chose other brand, the ability to really fine tune exact depth stops to diff depths as they use diff system from DeWalt, & if DeWalt had that system, I’d own 5 DeWalt tools
@patrickbledsoe2176
@patrickbledsoe2176 Ай бұрын
Ive always wondered why no 1 ever brought up dewalt never having a orbital action on the battery recips
@WDub963
@WDub963 Ай бұрын
This is the first video I’ve ever seen from this guy and the opening line sold me. I’m in! Idk where we are going but I’m in!
@ToolReviewZone
@ToolReviewZone Ай бұрын
Buckle up brotha! 😎👊👊👊
@mrmoto7682
@mrmoto7682 Ай бұрын
The plunge router please! Bummer about the impact driver.
@_Rick_S
@_Rick_S 25 күн бұрын
I used to be a Dewalt fanboy to the point of having a stack of Tough system tool boxes taller than I am but not anymore, not after the past couple of years. Used a brand new impact for ONE fence project and it sounded like a box of loose ball bearings afterward. Sure the fence was 325 feet long but still, a one project tool? Used their 20V weed eater for light homeowner use for less than a season before it burnt up. The motor only has tiny little vent holes and apparently is just about guaranteed to fry if you dont blow it out and clean it perfectly after every use. Their 20V edger is designed to rotate backwards and it's always cutting at maximum depth, no matter how slow you try and go it'll constantly limit trip and stop running. Their 20V circ saw is left-side bladed so if you're a righty like most people that means they did a great job of engineering it to get every splinter and speck of dust that it throws right into your eyeballs. Finally their recip saw will absolutely vibrate tour teeth out if you don't have the shoe up against the work for even a split second, this was through a bunch of different blades. It's a shame too, I was about to pick up their 15 foot pole saw, really liked the reach on that but now I'm buying into the Toro 60V line of tools. Their weed eater is every day pro-use grade, it's such a massive step up and for not a lot of money. I'm on team screw Dewalt forever here 😂😂
@seancunningham4254
@seancunningham4254 20 күн бұрын
What tools do you you like then? Just curious
@tylerboone7668
@tylerboone7668 15 күн бұрын
Their circ saws are what made me switch to milwaukee, 2 cuts and motor wouldn't do anything but click. Also hate that they come out with a different battery platform every 6 months just make all the tools work on one battery!
@tylerboone7668
@tylerboone7668 8 күн бұрын
@_Rick_S i was actually really happy with dewalts pole saw and their chainsaw is actually really good and doesn't kill batteries like i thought it would but their leave blowers left me disappointed it kills a 5 Amp hour battery very quickly
@Kevin_Rhodes
@Kevin_Rhodes Ай бұрын
DOA and dead in short order tools happen -that's why they have a *warranty*. I had a DeWalt Stealthsonic shopvac that ran for 10 minutes and never turned on again. Quick trip to Lowe's and exchanged for another one that I have put days of use on with zero issues.
@pete_lind
@pete_lind 28 күн бұрын
There was just on other channel new Metabo HPT/Hikoki drill for repair , one wire not set properly, so it worked few minutes until the wire worked out of its place. Stinky rubber overmolding , use "wrong" rubber that reacts with oil and it smells like vomit.
@dannyjmeil4645
@dannyjmeil4645 Ай бұрын
I’m so happy I bought my Dewalt cordless tools between 2018-2020 I saved so much money and got free batteries with most of my tools. The best deal was an atomic oscillating tool with a 5.0 battery for 120.00
@bradleyfrederickson9536
@bradleyfrederickson9536 13 күн бұрын
Try the hydraulic 870 so far its the most relible and just better that the 860. A little slower but reliability is key
@Patricksmancave
@Patricksmancave Ай бұрын
Please do a full video on all of these cool tools! Thanks
@D52525
@D52525 Ай бұрын
If you could only pick one 18-20V line for all your tools… Dewalt XR or M18 Fuel… which would you pick in terms of reliability? Seems like Milwaukee has electronics and trigger issues?
@MakeWithMike
@MakeWithMike Ай бұрын
24v
@daltonunknown6679
@daltonunknown6679 Ай бұрын
I have a mixed of milwaukee m12 m18 dewalt and ryobi
@SystemsPlanet
@SystemsPlanet Ай бұрын
Makita are cheap enough you can buy multiple and always use a new one
@brianbz95
@brianbz95 Ай бұрын
Dewalt. Neither perfect, Milwaukee has their own reliability issues. Dewalt better value
@wildbill23c
@wildbill23c Ай бұрын
Dewalt's prices have gone up way too high for their quality or lack of, and the lackluster performance....every other tool brand seems to have left Dewalt in the dust....Dewalt keeps screwing with battery platforms, and tool branding nonsense and forgot they're supposed to be building quality high performance tools not be changing tool branding names and designs to cover up their lack of performance and quality. I had a lot of Dewalt 18V, 20V, and a few of the Flexvolt tools....sold all that stuff earlier this year, plenty of other choices out there with better performance, and less expensive batteries and accessories.
@MikeyDonna
@MikeyDonna 27 күн бұрын
I just bought a Triton router after comparing it to the Dewalt . Triton makes 2 versions of their plunge router, one 2 1/4 & 3 1/4 hp . I wanted another DeWalt tool as all but a couple of mine are . There was to much difference to not buy the Triton.
@Michael-q6v
@Michael-q6v Ай бұрын
We wanna see the hammer drill and router for sure. Great job and thanks for the video. 👍🏻
@Techprep23
@Techprep23 Ай бұрын
I was hoping too Dewalt would finally bring their line into one line instead of caving to the retailers. home Depot had their panties in a wad that lowes got the 12 volt extreme line so DeWalt came out with the atomic so home depot could have a subcompact 20 volt system. It will Reduce the confusion for the consumer. My only hope is that DeWalt keeps up with skil and what they offer in their 12 volt line. As I have invested pretty heavily in their DeWalt 12 volt extreme line. I hope the walk will make the same investment it's users have. DeWalt just makes higher grade tools then skil. Nothing wrong with skil if you're a Johnny homeowner. I just like DeWalt's fit and finish a little bit better.
@A6Legit
@A6Legit Ай бұрын
I need a whole video on that router. Would like to see that big chungus drill too.
@ToolReviewZone
@ToolReviewZone Ай бұрын
You got it brother 👊
@nelsondog100
@nelsondog100 Ай бұрын
I’ve been waiting decades to see an orbital action reciprocating saw. It’s about bloody time somebody made one!
@neilbrown82
@neilbrown82 Ай бұрын
Milwaukee has had one for a while...
@RidgidRon
@RidgidRon Ай бұрын
That is a long support handle-why is longer than everybody elses?
@SystemsPlanet
@SystemsPlanet Ай бұрын
Some ladies like it longer. They say it's "real nice like"
@ToolReviewZone
@ToolReviewZone Ай бұрын
Lol
@CJINW
@CJINW 24 күн бұрын
It’s not. Makita has had a long one for 5 + years.
@hansangb
@hansangb Ай бұрын
Hope that router uses the dewalt locking hose attachment. I didn't even know they made that. Once I got it, my life was sooo sooo much better. I hate the gov't, but they should mandate a law that every tool have a common adapter.
@junkstang302
@junkstang302 Ай бұрын
The 1/4 impact works when it works....but if you use it daily it will fail quickly
@steelvalleysportsmen7737
@steelvalleysportsmen7737 Ай бұрын
I really want to see a deep dive on that sweet sweeet router
@electricianron_New_Jersey
@electricianron_New_Jersey Ай бұрын
TRZ this new Dewalt router looks mint. I don’t even need it but I want to come up with a project to justify purchasing it. Real nass like! 👍
@Shannon-v3r
@Shannon-v3r Ай бұрын
I have 5 routers, had five, now six. I justified buying the new dewalt because I was sick of using the circle jig and the power cord kept tangling up with the dust collection hose. The router is almost flawless. One livery small thing is the inability to use guide bushings accept for the 30mm one they supply and you screw in. I don’t use them much and aftermarket universal bases are cheap
@A6Legit
@A6Legit Ай бұрын
Built in vacuum attachment on the router base is REAL nas like. The trigger on the handle is genius. Having to take a hand off to find/turn off the switch at 15,000+RPM is not nice.
@A6Legit
@A6Legit Ай бұрын
And the speed adjustment! Dang it, I don't own any DeWalt tools but that router has to be the best design on the market.
@randerodr7389
@randerodr7389 Ай бұрын
One on the saw would be cool b/c I'm looking at buying one and I have Dewalt stuff already. Have you done a video on Milwaukie tools ? My work has them and they seem great. Thanks.
@ToolReviewZone
@ToolReviewZone Ай бұрын
All kind of Milwaukee videos 👊
@randerodr7389
@randerodr7389 Ай бұрын
@@ToolReviewZone Okay thanks.
@marvinbenjamin3015
@marvinbenjamin3015 Ай бұрын
The router is 99.99 percent perfect the only thing I see missing is a fine height adjustment when doing pattern bits or edge profiles I will buy one in spite of
@alvinclose8181
@alvinclose8181 Ай бұрын
Looks like I need to change to Dewalt, except for the hammer drill
@derekparent752
@derekparent752 Ай бұрын
Never had great luck with the hand tight chuck on their drills. Definitely blade left saw, I’m right handed as well. Great fun review.
@dennismorin7506
@dennismorin7506 20 күн бұрын
I feel kind of lucky all my dealt tools are old. I use dewalt because they at least were the best value. I like to stick with the platform because of my investment with the batteries.I like to call them default some of their tools are the best. Very few are junk.😅
@AlexGuo-28
@AlexGuo-28 25 күн бұрын
How cold is it in your garage for your breath to be visible in the air? Stay warm :)
@burwoodbuild
@burwoodbuild 29 күн бұрын
No need to do a video on the router as I’ve already done that on my channel! I’d like to see more on that hammer drill though thanks! 👌🏼😉
@boskocorovic2064
@boskocorovic2064 20 күн бұрын
Hand spinning of impact driver should be used in your Super Tuesday Professional Tips clip Hehehe
@nicholasmanovich4330
@nicholasmanovich4330 Ай бұрын
Kid from work had a brand new saw zaw and same as your impact, nothing. Straight outta the box it was no beauno.
@ToolReviewZone
@ToolReviewZone Ай бұрын
Very interesting 🤔 Thanks for the feedback
@captainskippy6622
@captainskippy6622 Ай бұрын
I bought that hammer drill. You could club a baby seal with that handle.
@GPS0159
@GPS0159 Ай бұрын
I'd like to see more router 😊
@MakeWithMike
@MakeWithMike Ай бұрын
2rd place I'll take it ! Woogie boogie Flex is awesome ! One charger for all tools nlofetime warranty,and power 🔋 💪
@leonardpaciora5039
@leonardpaciora5039 Ай бұрын
Thanks again Clint!!!
@puterg0d
@puterg0d Ай бұрын
You missed the new impact wrenches
@randallthomas5207
@randallthomas5207 Ай бұрын
And, they still haven’t given any thought to whether or how their tools fit in their Tough System containers. Wake up DeWalt.
@wildbill23c
@wildbill23c Ай бұрын
They really don't care...and their cases and containers are ridiculously expensive and you throw the tool in and it just clatters and slides around because in that ridiculous cost they couldn't other to design the cases with movable partitions for all their tools, or have that foam stuff in them to be able to customize those boxes.
@MR.SURVIVALIST
@MR.SURVIVALIST 27 күн бұрын
I personally use the dcf860 and mine works fantastic. I think yours is a defect
@dewaltonlyrestistrash3934
@dewaltonlyrestistrash3934 Ай бұрын
I love the impact , drill and router the rest are just re dos, but regardless that’s real nasssssssssssss like . 😊
@warpig372
@warpig372 Ай бұрын
Clint maybe your supplier has a man crush on you from the old man cologne?😄
@mattreyes1026
@mattreyes1026 Ай бұрын
The real reason I ditched DeFault 🚮
@brianbz95
@brianbz95 Ай бұрын
To go where?
@trishaleaver3581
@trishaleaver3581 Ай бұрын
Maybe a little heater would be nice.😀
@dannycolemire2652
@dannycolemire2652 Ай бұрын
It was real nice like seeing the evil twin. I love that Dude
@markfogle3954
@markfogle3954 Ай бұрын
the router would like a review.
@edgarcornette6387
@edgarcornette6387 Ай бұрын
ahhhh thats so nice like.. I love you too my brother.
@mattwallace7058
@mattwallace7058 28 күн бұрын
I use dewalt when i dont wanna fuck shit up. I use milwaukee when i gotta fuck shit up 😂
@bradleyfrederickson9536
@bradleyfrederickson9536 13 күн бұрын
Thats facts!!
@terryriley1061
@terryriley1061 Ай бұрын
I want to see drill/driver remove ceramic tile
@BurritoSupreme_
@BurritoSupreme_ 25 күн бұрын
Liked 👍 the video when the evil twin showed up 😆
@MakeWithMike
@MakeWithMike Ай бұрын
Dewault or defects ?
@1pjmac
@1pjmac Ай бұрын
I think you need some insulation in your shop
@markgross3256
@markgross3256 28 күн бұрын
Video on all of it...
@frater3wade
@frater3wade Ай бұрын
I have switch to Milwaukee as well as well as my guys.😊
@wildbill23c
@wildbill23c Ай бұрын
I think they're priced about the same anymore at least that's what it seems at Home Depot in my area, the red and yellow tools are about the same price....and it seems like Home Depot is pushing more towards the red tools, tons of Milwaukee stuff, even a lot of the Milwaukee storage boxes out in the isles, less stuff from Dewalt. I sold all my Dewalt stuff earlier this year, got tired of the ridiculous prices and lackluster performance, and they keep redoing their tool line but they don't seem to boost the performance and quality on anything, they just raise the prices and call it a new tool, that they just change the model number on from time to time but its still a 10+ year old tool.
@nasirpervaiz4065
@nasirpervaiz4065 Ай бұрын
I agree with the smell 😂
@bobbymulwee7641
@bobbymulwee7641 Ай бұрын
I love Flex
@Ghostjam1
@Ghostjam1 Ай бұрын
Make videos for all... come on now, not buying until I see videos of all 😅
@NextLevelCraftworks
@NextLevelCraftworks Ай бұрын
Its real nice like. except that you got a dud 860, thats not real nice like
@mardy2630
@mardy2630 Ай бұрын
Hi Clint... Please do not do a video on that hammer drill.
@paulschacht9777
@paulschacht9777 Ай бұрын
Router vs Impact vs Vance
@prestigemechanical3600
@prestigemechanical3600 24 күн бұрын
I love tool reviews however non of these guys make a living with them so it’s hard to know the real story behind how tools work and why tools are actually better or not.
@advanced8526
@advanced8526 28 күн бұрын
Still cant get the dcf870 anywhere fkin local!
@antoniononame3037
@antoniononame3037 22 күн бұрын
Yo this dude is a fool 😂 I love the beef with vcg
@Andrew-bu8io
@Andrew-bu8io Ай бұрын
Looks like you are needing a heater bud
@DET_C0RD
@DET_C0RD 29 күн бұрын
Milwaukee makes that perfect little m12 ratchet. Dewalt? Big fuckin oblong unusable in a tight spot ratchet. I like dewalt, I have almost everything dewalt, but damnit they need to get with it.
@harveystephens6115
@harveystephens6115 Ай бұрын
Nice tools
@ryanfields5181
@ryanfields5181 25 күн бұрын
Plunge router!
@landshark6659
@landshark6659 Ай бұрын
Clinton drill me please I need more drilling, drill it good drilling it deep drilling it now, lol ty
@MarkDower-cf7or
@MarkDower-cf7or 26 күн бұрын
Up market b&d
@landmarkconstruction
@landmarkconstruction Ай бұрын
WOW CLINT, NOT REAL NICE LIKE!!!!!!
@MakeWithMike
@MakeWithMike Ай бұрын
18_24j
@nickoreckless8115
@nickoreckless8115 29 күн бұрын
I’m all dewalt besides like 3 tools, I tell you what there new renditions /designs look like trash to me , they seem so late to the party on everything . I think once my current tools give out im gonna have to move over to a different brand like flex. I won’t go full Milwaukee simply because of people like VGC putting such a douchey stereotype on the brand
@mikeevans565
@mikeevans565 Ай бұрын
My brother, how'd you know what I wanted for Christmas??? Are those tough cookies vegan??? Great video as usual .
@SystemsPlanet
@SystemsPlanet Ай бұрын
Please create fighting robots using your tools and see if you can beat them in a chaged death match. If you win, it will be "real nice like"
@sworrall6104
@sworrall6104 Ай бұрын
On the rag? What a rant. Hope things improve for you Clint
@Thebattler86
@Thebattler86 Ай бұрын
New DeWalt tools are terrible, in particular the mitre saws. Their impact driver was always shite. I never liked Dewalt and I never will. Milwaukee are even worse, their gen 4 has been a disaster. I had all Milwaukee tools and got rid of them. Hikoki/Metabo HPT alll the way. You can always rely on them and very ergonomical.
@stephenfanthorpe2708
@stephenfanthorpe2708 Ай бұрын
My neighbours got the DeWalt McLaren impact it annoyingly kicks ass on all my makita’s
@Thebattler86
@Thebattler86 Ай бұрын
@stephenfanthorpe2708 Every tool is good for the first few months after it was bought. Wait until it has some work done, then tell me how good it is. Dewalt releasing limited edition "McLaren" models is so cringe and makes me see them as even more of a joke than I already do. It comes across as a desperate attempt to make up for a drop in sales. Such a cheesy promotion gimmick you would see for childrens toys, akin to the "Milwaukee Truck Tour", clearly targeted towards naieve Americans🤣 I'm quite insulted to be honest, do these big tool companies think we're 4 year olds or something?
@stephenfanthorpe2708
@stephenfanthorpe2708 Ай бұрын
@ Yea okay but unfortunately the real world doesn’t work like that, it is despite your yellow cheesed assumption far superior than a lot of impacts I’ve used including my makita’s common we aren’t 5 lol your mum isn’t going to tell me your right because you said so and you’ll cry if I say otherwise 😂.like or dislike them it’s still facts . Should go try one 1st then check back in.
@Thebattler86
@Thebattler86 Ай бұрын
@@stephenfanthorpe2708 How do you think I know what the story is with Dewalt tools? Im looking at them every day. Fangirling for a brand is no use when you're sending them all back to be fixed.
@jonishere2128
@jonishere2128 21 күн бұрын
Such a shame the dcf860 is such a cool impact driver but it just seems like it has way to many issue’s 🥲
DeWALT Destroys the Competition with These 5 Tools...
18:55
731 Woodworks
Рет қаралды 272 М.
Not Just Fake but Counterfeit Power Tools
17:09
Torque Test Channel
Рет қаралды 596 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
I wish i’d known this sooner, How to use calipers like a pro
7:42
James Gatlin
Рет қаралды 1,2 МЛН
YouTube woodworkers are lying to you.
35:55
ENCurtis
Рет қаралды 182 М.
New Tools from DeWalt - New Drill, Driver, Saws & PowerPack!
8:01
Pro Tool Reviews
Рет қаралды 136 М.
I don't get why people think drawers are hard
20:04
MWA Woodworks
Рет қаралды 749 М.
This new tool will change how you work forever
8:02
Tool Review Zone
Рет қаралды 279 М.
Turbo Fan Dusters are getting out of hand
14:08
Torque Test Channel
Рет қаралды 1,6 МЛН
This Project SAVED Me THOU$AND$ $$$
31:21
GRINwood
Рет қаралды 4,3 МЛН
7 Clever tools few people know about.
12:42
Stumpy Nubs (James Hamilton)
Рет қаралды 133 М.
DeWALT Just Changed Cordless Tools FOREVER (genius battery & drill)
16:06
VCG Construction
Рет қаралды 148 М.