If You use HOBBYWING You NEED This OTA Programmer

[@doublerpix1597]

My module doesn’t show up in Bluetooth mode when I hit the connect button. And when I try the Wi-Fi mode and I hit connect, it says “connecting..” but then it just goes away and nothing happens. The app never ends up connecting to it. I’ve already tried resetting it multiple times. Any help? Thanks

[@3gsheldon685]

Thanx RCM!!! I was looking for into on the programmer and BLAM i get to you Tyler teaching me!! Thanx again...

[@thepdails]

Hey great video! Question: Can you leave this connected? I want to be able to run practice laps and change settings between every few laps the compare changes, without having to touch the car.

[@LegendsPizzaCo]

Huge think nobody tells you. After you program this it goes into blinking green instead of the standard red. Blinking green means running in sensoreless mode when its really a sensored motor. The car bogs down at top speed. You have to recalibrate the esc after the changes with the neutral. Full gas and full brake

[@jimmyv1753]

I’ve left mine attached to the car but wondering if that’s not what everyone else is doing. But it is cool because you can see the RPM, speed, throttle% and other live data

[@joaquinrobles2474]

Are you using a IPhone or android?

[@RBRCH]

Nice video, thank you! Can you tell or show maybe if the datalogger can show amperage over time? In a graph? Or does it show max values only?

[@jasonbuetow1]

I’d like to use this on there platinum aircraft esc. Does it work with iPhone and could I leave it permanently connected on my plane to connect whenever I need to?

[@davidr7813]

I am trying to get one of these to work but when i get to parameters it says it not set.....what am i doing wrong?

[@gunslinger9352]

I just got my ota, installed hw v2 for my max8 g2 combo. Im surprised that i have like a 1/3 of all settings... What the???

[@dmatter827]

Do you need this for the G3 Justock speedo?? My wifi programmer won't connect.

[@nikleiser5888]

I would like to know if the OTA Programmer works with the Xerun 150A, which app is necessary for it and if the controller outputs a telemetry ? Chers (from freezing cold Germany) Nik

[@Atris_965]

I have max5 8s 200a g1 , Can I use it or not?

[@RedsRacingRC]

Will this work with the ezrun max10 sct?

[@KantaBanes]

Nice video, thanks you! Can I program a Hobbywing Quicrun-WP-10BL60 ESC with OTA programmer?

[@FahmiSani-q6l]

Have you tried it?if you do,does it work?I want to buy the hobbywing quicrun 10bl120 G2 and a ota programmer so if it's work,tell me

[@steve-o-73]

my max 4 wont go to reverse or allow me to set up

[@NicklasRunesson]

I have this ota programmer Module but my settings on parameters Settings did not Shows me all settings what you have i use V2 app and i have max10 ezrun esc. I have only General Settings on parameters with max10 ezrun G2 esc. Is this normal if i have only General setting??

[@jameshyman2497]

Will it work on any hobbywing esc

[@Cenobites4213]

Will this work with tamiya and traxxas esc’s

[@RCSpeedster100]

Does it have data logging?

[@davidgroh9008]

does it work with 1s aswell

[@wise--men]

Show! (from Brazil)

[@watharkar7374]

Should have shown how to connect it to ESC as well.

[@TranceFur]

He did. He showed exactly where it gets plugged in.

[@jimmyv1753]

There is only one place it can plug in. Just make sure you get the +- and data wires matched up. It is small print on the esc and the box.

[@watharkar7374]

@@TranceFur Thanks, maybe I overlooked.

[@soulbrother3299]

Like you I chose HW!! Do think I can use the HW set esc and motors and beat the best when they use tp,castle,ect? I chose HW bc its solid and supposed to stand the test of time?

[@giopirmisashvili5514]

Thank you

[@NBubba]

i use the little led box for the same stuff. anything it does that the other dose not

[@RCMadnessHobby]

Being able to update software without a computer. Also some of the settings have more fine adjustments. For me it’s just easier to use

[@turtletrading4207]

@@RCMadnessHobby True, but it is more dangerous because you can loose connection and mess up completely the update and ruin your ESC. The settings adjustments are the same.

[@stevefrench3564]

ty

[@soppdk]

when i try to update the firmware it gets stuck on 73% every time :/ cant reset or anything now

[@turtletrading4207]

This is why you should use the programming box every time.

[@murrijuana2842]

​@@turtletrading4207programming cards and boxes are a total scam. Fk hobbywing.

[@cityofplant]

Can we downgrade the firmware?

[@blacksheeprcmodelers959]

This will not work with the FUNFLY series

[@turtletrading4207]

Nahh, the program box is so much batter and faster. Sure, you get a better data presentation with the OTA but it's not worth the extra price and time needed to connect everything.

[@steve-o-73]

it keeps going to level 1

[@tobydyes]

They copied Castle

[@murrijuana2842]

All these "top" brands are money hungry scum.

[@ProperSkill]

I hate these hobbywing systems. They are slow unless you use boost and turbo, then they will melt your battery terminals. Hobbywing sucks, I feel sorry for anybody who buys this crap.

[@extec101]

what system are you using? im using a xr10pro and 6.5T motor, no problem with the system other then the ota adapter always whant med to turn on the location and bluetooth on my phone withs i feel is wierd as it should only use BT.

[@TheAusherGuy]

Will this work with the quickrun 10bl120?

[@pitbull8766]

Yes