IKEA FJELLSE Double Bed Frame Assembly with LURÖY slatted bed base.

How to assemble Ikea Fjellse bed frame Pine. Standard wooden IKEA double bed frame FJELLSE pine wood. This one is with slatted bed base LURÖY. Bed slats are made of layer-glued birch. They bending slightly for better adjusting to your body and matrices weight. Ikea Fjellse double bed is one of the cheaper Ikea double beds currently £59 in the UK.
**Tools I'm using**
Small electric screwdriver
amzn.to/2AYddCK
Bigger drill and screwdriver all in one
amzn.to/2RJMJiP
For more tools for furniture assembly or general DIY adventures.
www.amazon.co.uk/shop/ppflatpack
Here is my stuff :
Flat Pack Furniture Assembly London
www.ppflatpack.co.uk
[e-mail]
/ ppflatpacklondon
/ ppflatpack
/ ppflatpack
plus.google.com/+PPFlatPackLo...
/ ppflatpack
/ ppflatpack

[@ginabisaillon2894]

I appreciate this very much especially since this bed has been discontinued and I can’t find my instructions! The bed has been in storage for a couple of years and I had forgotten how to assemble it, so your video is not only very well done but very timely for me thank you!

[@PPFlatPack]

Thank you for watching:)

[@krutakshelat516]

Amazing ! Thanks a lot for this

[@dhahabu27]

Thank you so much, I couldn’t have done it without you!

[@PPFlatPack]

Thank you for watching:)

[@annastrouse-wishard2097]

Hi. Great job thank you.. I bought mine from individual and the long screws that go in the piece that goes outside from footboard to headboard the screws go in without turning. Just push in. Do I bef to get my drill and put in farther?

[@ST-hd8qk]

Thank you your video help me to build my bed finally after struggling for more than 1 hour

[@PPFlatPack]

Thank you for watching

[@Eddythe_Eagle]

Sounds like you got a plan. I have a bed from Ikea, but I will make my own frame to hold slats instead of a current box spring, at the hight that I need. Not difficult. We have another bed from Ikea that was made for slats. We find that the slat support works better providing that the spaces between the slats are no more that 2 ". That should work out for you! Blessings

[@pululo98]

Thanks for your time and effort to help others this video has been very helpful again thanks a lot..

[@supersly3211]

Awesome, thanks!

[@islamicsoulhealing]

helped so much thank u

[@taechanyz]

Thanks... Good video.

[@user-bi9gb2po8r]

Thank you this video saved me 😅

[@foziafarooq7363]

Thank you Buddy

[@ah5721]

this is helpful as I got the bed slats for my bed but I had no clue why they were not wide enough. they are designed for the middle bracer -my bed that's not from Ikea doesn't have and is just a boxy frame so the slats are basically useless...🤦‍♀I will be returning them and going to the hardware store to by some planks of wood cut to size instead..

[@Yadira19941]

Gracias!!!

[@0028bjc]

Thank you so much I could not figure out where the silver bars went, as I bought this off Facebook.

[@PPFlatPack]

Thank you for watching

[@carell98270]

What size and type screwdriver do I need to put these screws in with... or with a drill what size and kind?

[@user-gc3ds5mx4c]

Thanx man from Russia!

[@PPFlatPack]

Спасибо за просмотр :)

[@madhavaboddapati3636]

You saved me my man

[@PPFlatPack]

Thank you for watching ;)

[@rosi8618]

Obrigada !!! Ajudou me muito 🍀

[@PPFlatPack]

Obrigado por assistir :)

[@bewithmeanxiety7289]

I'm trying to assemble this same bed frame right now without any instructions. I'm having a hard time putting the nail into the metal bar thing with two holes that I have to slide inside and get the nail to go into the two metal holes. I noticed you are using a drill. I didn't use a power drill. Would that be the problem?

[@kamranmangat]

Thanks...u saved my marriage 🤣🤣🤣

[@PPFlatPack]

Uuuuuuu.. Thank you for watching.

[@ilseescalona8412]

Thankssss vey much

[@PPFlatPack]

Thank you for watching

[@Bazooka85]

Thanks for the video. Done subscribe

[@aariketsgishi08]

I'm planning to buy this neiden(140*200cm) can anyone review is it durable for 2 persons (healthy)??

[@omicronplays3607]

thanks

[@PPFlatPack]

Thank you for watching:}

[@teganbriggs86]

Hi thanks for your video I know this is an old video but I am needing more parts to build as they are missing and wondered if it said how big the bolts are and screws so can buy replacement thanks!

[@PPFlatPack]

Sorry don't have access to this bed anymore but you can find online all documents

[@kahilsyma]

I have a question, which size Luroy bed base did you use?

[@PPFlatPack]

I think one I did was standard double with measurements Length: 197 cm Width: 142 cm Footboard height: 33 cm Headboard height: 80 cm

[@rosemaryyost6813]

Hi, I was just given this bed without brackets and I was wondering if you know the type of bracket it needs for the middle piece?

[@katieorr1761]

This was my question too. I was thrilled to see this video. Also, missing some screws. I was hoping to see an answer.

[@rosemaryyost6813]

To be honest we put the middle in without any brackets. There a so many screws hold the bed together plus the slats in the middle you should be fine. We’ve had no issues.

[@megcogsdill1463]

I'm going to get the Hemnes bed and I don't know what to do about slats. We have a king size and we have split box springs. Should I get these to go with the box springs? I don't think that the bed will be able to properly support just the box springs but I don't know what else I'd put there.

[@ucheodega5200]

does the fjellse bed frame come with the slatted bed base ?

[@PPFlatPack]

IKEA LURÖY slatted bed base is included in the price.

[@Luxy38]

Thankntpu 😅

[@stacyxxy]

The screw at the tops of the foot of the bed are not going through. I've done everything like you said 😪

[@TimSticle]

i have the same problem -_-

[@anitaa8041]

It's frustrating but keep twisting them around and up and down eventually they should go theough

[@kareem3alawi]

I am 270 pound should this bed be good for me?

[@malyndahsexotics1543]

It should! Over 400lbs has slept on my bed!

[@alyaqistina2496]

I got this frame a few months ago and when I put my bed on it, it starts to curved in the middle😐 can you tell me what's wrong??

[@ishaalwaseem1683]

I think you should rebuild your bed again

[@alyaqistina2496]

@@ishaalwaseem1683aaaa I see alright will do 👍🏻

[@ishaalwaseem1683]

@@alyaqistina2496 I know it's super tough but I know you must be a strong girl like me

[@alyaqistina2496]

@@ishaalwaseem1683 I rebuild my bed today guess what 🥳the problem's solved🙈😍 thank you for your suggestion I really appreciate it ❤️

[@ishaalwaseem1683]

@@alyaqistina2496 wow your Welcome dear but are you Muslim ( I am too) 😊

[@tennyoAMV]

3:38 Why does everyone else seem to be able to get this but me? Why the F can't I get the freaking screws to go through the freaking holes without the metal tube thing falling out. I've been trying for hours wtf why am I the only one who can't get it??? 😭😭😭😭😭😭😭😭

[@boyap6841]

Ikea is selling only bed frame without slatted bed base. Do you think bed frame can hold the matress without slatted bed base?

[@PPFlatPack]

I dont think it would hold the mattress without slats.

[@user-dx7gh8qi4o]

He forgot a part

[@sahand1722]

FIRST comment

[@ucheodega5200]

is this the same one with the slatted bed base?www.ikea.com/ca/en/catalog/products/80185066/

[@PPFlatPack]

uche odega Look like in your country is sold separately. Here in U.K. Bed cost £59 with slated base. Look like in different countries different stuff but when you check on Ikea site you can see what is included and what isn't

[@7woopxd600]

helped so much thanks