Ikon spoiler install 2016-2019 CRUZE/ Dave's World

Join this channel to get access to perks:
/ @davesworld2132
Contact me at www.supercruzes.com
Dave's World Discord Server / discord
Need CRUZE parts?: www.davescustomparts.com
KNN Air Intake System 16-19 CRUZE amzn.to/3U1cmqs
/ turbobayperformance
Ikon Spoiler Parts / tools
Ikon Spoiler amzn.to/3HLhtXX
6MM studs for spoiler amzn.to/3YBf09l
6mm nuts for studs amzn.to/3x8NRi6
fender washers amzn.to/3XiDbZ4
Black RTV Silicone amzn.to/3jQ00FF
Battery powered grinder amzn.to/3XnyzRk
Batter powered ratchet amzn.to/3HNGhyy
Batteries amzn.to/3jJEJ0m
Charger amzn.to/3DQovtl
Hole tap and die set amzn.to/3RM5Vbn
Tools
Spark Plug Gap Tool: amzn.to/3MhQyTT
Expensive Spark Plug Gap Tool: amzn.to/3GOKl0w
Firewall wire tool: amzn.to/37fVCd6
Dave's World build parts
NGK Spark Plugs: amzn.to/3y12LbS
GM Delco spark plugs: amzn.to/3xYTW2i
Turbo gasket with heat shield: amzn.to/3slHMx9
Link to the CRUZE IKON Spoiler: amzn.to/36d7VpC
Link to my KNN Air intake: amzn.to/3CDAkRF
Link to the 18" Enkei EV5 Wheels: amzn.to/366pUxQ
Link to gunmetal 18" versions: amzn.to/3vXAAK0
Link to Glow shift boost gauge : amzn.to/3Cxh7Be
T fitting You can use: amzn.to/3nIs0K2
vacuum hose I used: amzn.to/3IAEfjZ
Air fuel ratio gauge: amzn.to/3JFDRko
Fuse circuit add on : amzn.to/3uNcNf0
Universal gauge pod: amzn.to/3EiyRBc
Handy free car buying book! amzn.to/37Dr7Om
Ikon spoiler install 2016-2019 CRUZE/ Dave's World
Due to factors beyond my control, I cannot guarantee against the improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not David who is seen in this video.
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all products, I recommend testing the gauge before beginning the install process.
⚠ DISCLAIMER:
While I strive to make the information provided in this video as accurate as possible, I makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. I am not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@SLPCamaroLT]

Man I so love everything you're doing to your Cruze and I'm definitely planning on doing a lot to mine As a certified GM tech I'm looking forward to my project and making it stand out. Keep up the good work brother I definitely follow you on KZbin Facebook and I frequently look at your parts store so I can plan what I want to save the money I'm trying to get established with my own garage to be shop owner operator so my time is all over

[@davesworld2132]

That’s awesome! BTW how’s y people still been SLP. That was my dream Camaro when I was a teenager !!!! 6 speed LT1 with LT4 parts

[@george230]

Look Great Dave. Hard work pays off. Exhaust looks great to.

[@davesworld2132]

Hey George. Hope your doing well.

[@ProfesorGeovanni]

Haces envios para México?

[@davesworld2132]

Yes/Si

[@DirtyCruze.]

Hey Dave, what's good? The link to the 6mm studs is not 6mm. they are 25mm. Though you should know, buddy.

[@davesworld2132]

Thanks. They may have changed the address on the site I will update it. Thank you.

[@DirtyCruze.]

I look at the ones in the link they seemed to be smaller in person, but after looking at the studs, they might be right. On Amazon, they are listed 25mm. I'm guessing that link is correct. Sorry about that. The 25mm threw me off. 😅

[@davesworld2132]

@@DirtyCruze. know what. May be the length that’s 25.

[@atom10001]

I used the gorilla double sided tape worked for me

[@richardfrausto747]

Dave your cruze is looking great

[@davesworld2132]

Hey how have you been? By the way I saw another comment come through I think yesterday or the day before. KZbin didn’t display what you asked I just got a notification in my email but I couldn’t respond.

[@richardfrausto747]

Im not sure i think I was going to ask a question about the hood strut video you did

[@davesworld2132]

@@richardfrausto747 well I apologize if I missed it. Hope all is well.

[@richardfrausto747]

Dave im doing fine thanks hoping my tax return will be good then I can visit your store and upgrade my Cruze

[@davesworld2132]

@@richardfrausto747 appreciate that!!!! Lots of cool parts being added.

[@joshuarecarte6567]

I found the spoiler but what about the one that has the bolts that has on the spoiler I’m thinking about buying one and I like it how you have it and same with the exhaust

[@davesworld2132]

I have to custom make those for you.

[@brandonjohnson6304]

I like my hatchback but damn the more you do to your car makes me want a sedan version 😊

[@davesworld2132]

LOL It's funny I wanted a blue hatch back so bad when I was looking for a manual CRUZE

[@brandonjohnson6304]

@@davesworld2132 I wanted a manual so bad but around me a few I found for the price and mileage just wasn’t worth it what I got mine for I feel was very fair plus the redline edition was sick

[@davesworld2132]

@@brandonjohnson6304 Awesome. I haven't seen a redline edition in person yet.

[@baymori-bm8609]

What kind of ducktails did you use apart from the Ikon one? The black one where did you get it or do you sell it?

[@davesworld2132]

I custom make them. You can contact me at supercruzes.com

[@danielarias3755]

Yours didn't come with the nuts built in?

[@davesworld2132]

Not mine. In fact most people I talked to about it have the tape on version.

[@alexfoulks7509]

Make the wicker bills for that ikon spoiler!!!!

[@davesworld2132]

Eventually they will be on www.supercruzes.com message Jerilyn

[@grizz6505]

What kind of exhaust did you out on there? That looks great. Also, what tires did you go with for the bigger wheels?

[@davesworld2132]

I did the exhaust custom. Wheels I think are 225 40 18 or 225 35 18

[@jayirizarry3311]

What exhaust tips u use

[@davesworld2132]

Hi Jay. These are some double wall exhaust tips I ordered from a supplier of mine. If you have trouble trying to find something online I’ll see if I can get some for you.

[@baymori-bm8609]

I need you to hook me up with these honestly! Link for the double tips?

[@die_mez17]

Did you paint the spoiler or did it come like that? I assume you painted/has someone paint it but I don’t know

[@davesworld2132]

I painted it. I will be offering these in about a month with custom paint options

[@die_mez17]

@@davesworld2132on which website?

[@davesworld2132]

@@die_mez17www.supercruzesstore.com

[@die_mez17]

@@davesworld2132thank you 👍

[@die_mez17]

@@davesworld2132hey Dave, quick question, how was the process of removing the oem spoiler off your Cruze?I have one on mine but can’t find any info on how to go about removing it

[@StreetLegalCars]

Hi dave has anyone tried this spoiler on gen 1 cause I really like the design or you might have tried on your black widow please let me know if you can do some arrangements so i can get to know that it is possible to fit this spoiler on gen 1 I really like it

[@davesworld2132]

Possibly. The trunk shape is not the same but Jerilyn my wife can tinker with that

[@StreetLegalCars]

@@davesworld2132 I really want to mount this ikon spoiler on gen 1 and I guess there would me more like me eager