iMax B6 cheali charger

[@bleak0218]

What are these bride wires on the balance connections?

[@christopherstaples6758]

Nice job, thanks for some English text

[@Evilslayer73]

Hi do a regular usbasp programmer work for flashing the firmware?

[@flamone18]

Hi, I have the charger removed, I plugged everything as you say in the video, when I plug the USB tells me INPUT VOL ERR any solution?

[@eddy.saputra]

any videos of you about calirbate for current...?

[@EduardoGomes-hy5yt]

HELP-ME PLEASE! MY IMAX B6 HAS 4PINS 1- VCC 2-GND 3-SCK 4-RST IN YOUR VIDEO HAS 6 PINS MISO MOSI! HAS PROBLEM IN PROGRAMATION?

[@alex.ge17]

github.com/stawel/cheali-charger Verify if your CPU is supported by cheali charger under hardware requirements. If yes, just find CPU datasheet and connect directly to CPU pins. ww1.microchip.com/downloads/en/devicedoc/doc2503.pdf

[@ihor_babii]

My clone Imax b6 ver. 2.0 has five pins !!!

[@paunandrei9236]

multam mai scos din mare belea

[@eddy.saputra]

Hi nice video...can it charge LiHV..?

[@alex.ge17]

Hi. Yes, 4.35V option is available.

[@теректоргау]

уже 2.02 есть

[@haminurmanhamami]

what cheali in english?

[@alex.ge17]

github.com/stawel/cheali-charger . This is the name of alternative firmware for our iMax B6

[@lurkingcorsa10]

cool.. i Will try it bro, so i needs avrdude only , right!😎

[@alex.ge17]

Hi Yes, right. Verify on description your B6 charger version and compatibility.

[@lurkingcorsa10]

@@alex.ge17 but unfortunately, I just have imax b6 clone, All kinds of imax b6 u call in the description could be upgraded bro?👌

[@alex.ge17]

@@lurkingcorsa10 github.com/stawel/cheali-charger/tree/master/docs/imaxB6 for clon is olso ok . The main CPU and pinout should corresponding.

[@lurkingcorsa10]

@@alex.ge17 Hii alexx, if imax b6 overvoltage, is this flashing firmware good solution for this error .. buddy??

[@alex.ge17]

@@lurkingcorsa10 Hi. Yes, but after flashing it you must do calibration. Also, an advice, do not charge your lipo to 4.2v. With this firmware you can limit charging voltage to 4.18v.

[@ManAndTechOfficial]

Bro do u have the orginal firmware files like .hex file and .epp file

[@KrX3D]

if you mean the original from your device, when you hit read in eXtreram Burner this reads thee chip on your device. Just save it and you get your file

[@frits183]

Alexandru ! To complicate for me, but verry informative and good to follow with your translation. 👍👍😎

[@frits183]

And where to buy the USB stick ?? 🤔

[@watchingin3d549]

@@frits183 aliexpress or banggood.