So i don't use this charger anymore but it looks like its still in the wild :) Thanks for sharing and commenting this vid. its one of my most viewed vids. So thanks again
@mozesar8 жыл бұрын
YOU ARE THE KING!!!!!!!!!!!! :) You just saved my HK ECO6 4port 6s charger !!!! Thank you very much!!!
@albertriba48233 жыл бұрын
Mi imax B6 tiene 5 pines en lugar de 6. Es posble actualizar el fimware con esos 5 pines? Si es asi como debo connectarlo
@silvermaskxx8 жыл бұрын
I understand that my charger is a clone now .. and i dont get service menu1 or 2 !! also when i open it i found 5 pins only with no labeling on them .. any idea ?
@sallerc8 жыл бұрын
I have the same problem, have a clone B6 charger and don't get the menus. Did you have any success fixing it?
@silvermaskxx8 жыл бұрын
I am thinking to try the Cheali-Charger as he has a code for cloned B6s .. but i dont have the cables required
@brightontilifly8 жыл бұрын
did you get anywhere with flashing your charger I'm having no luck
@Ripcurl7778 жыл бұрын
+Brighton Till I Fly i had also no lables. Mine is also a clone but it worked
@liceogobetti24857 жыл бұрын
how do you connected?
@toochi848 жыл бұрын
Do you know how to get the usb to work on the imax b6 mini with the charge master software? or do you have any suggestions for a better charging monitor software?
@Ripcurl7778 жыл бұрын
No, didnt try this. I think you Need to flash other firmware
@Evilslayer73 Жыл бұрын
Hi do this work on windows 10?
@jimawhitaker7 жыл бұрын
I'm trying not to appear too stupid but what is and where might one acquire the programming cable? Thank you for the great video.
@MmeHyraelle3 жыл бұрын
Search usbasp with 10 pin to 6 pin adapter. Youll have to make some wiring.
@scarecrow2k69 жыл бұрын
I just ordered a knockoff Imax B6. It does not have the option for Li-ion. Should I try updating firmware or use LiPo option instead?
@davidstech14459 жыл бұрын
Use the lipo option.
@johnbee15744 жыл бұрын
The new firmware should allow for 6amp charging instead of 5 amp on some early clones wonder if there’s a hack to get more
@kanarimentos70569 жыл бұрын
.today i receive the charger imax first battery was good charge 7.4 v the next one is new one is 11.1 v its damage puff over heat can you tell me what reason why happened
@Pawel58376 жыл бұрын
Would you have the pinout layout for IMAX b6 mini clone? My programming port is located in upper_left corner. +Vcc, GND, RES, MOSI, MISO, SCK? Eventually how to check it?
@victorciprian783 жыл бұрын
I am not sure if the last one is SCK. My B6AC (fake), has a square symbol for that one, my USBASP has a square for MOSI, dunoo which one to trust...
@JackBender9 жыл бұрын
Nice video. Absolutely love the Migros Cumulus card ;-)
@fagosti9 жыл бұрын
+JackBender Lol, how comes we all use that card to support some kind of geek use? I used mine to focus a IR burning Laser :) Long live the Cumulus Card!
@matzex18197 жыл бұрын
if you want to calibrate flash "cheali charger". i would recommend anyway because of the features it comes with.
@mattivirta4 жыл бұрын
i not understand this ptogram system, why 2 time program, what soft need program ? 2 different or what this has do ??????????
@fahrvergnuugen8 жыл бұрын
Can you change the max voltage to 4.35 voltes in order to use this charger to charge LiHV packs?
@Ripcurl7778 жыл бұрын
Hi fahrvergnuugen, nope sadly this is not possible.
@fahrvergnuugen8 жыл бұрын
+Ripcurl777 so aftermarket firmware is the only option? It looks like theres an open source firmware that can be installed on the imax b6 atmega thats supports lihv
@disparporasmd3988 жыл бұрын
im not using mac, can u tell me what kind of software that similar to avr tools u using....for win 7 32 bit
@Ripcurl7778 жыл бұрын
Hi, there are a lot of tools for win: avburner or avrwin
@disparporasmd3988 жыл бұрын
+Ripcurl777 oks.... got it... thx
@binancetrdestekekibi45448 жыл бұрын
bu video sayesinde bozuk imax b6 onardım. thank you.
@Evilslayer73 Жыл бұрын
any schematics?
@silverghost35066 жыл бұрын
what is that usb thingy?
@ImYourGuiltyPleasure11 жыл бұрын
Excellent video! Thanks for posting.
@enricoenry95026 жыл бұрын
The HEX file has a password. Some gently can tell it to me ? Thank you
@jonnieZG2 жыл бұрын
The password is "thanks" (no quotation marks)
@admargodoy7 жыл бұрын
Is it possible do this with arduino?
@pierre-alexandrelemay172011 жыл бұрын
why flash ??? me i juste push dec and start and go to calib O.o i have imax B6
@Ripcurl77710 жыл бұрын
it does not work on all the imax B6 chargers
@MmeHyraelle3 жыл бұрын
Many imax b6 can only do that once and sometimes its already done.
@iagobispo75838 жыл бұрын
olá amigo poderia me ajudar ? estou com problemas para conectar o meu imax b6 no PC
@Ripcurl7778 жыл бұрын
so sorry for my late answer. You need the usbasp programming tool. just google for it. The "connector" i made in another video here: kzbin.info/www/bejne/rau7dqCsgtxgoaM
@alanchase73294 жыл бұрын
Who knew that charging batteries would become such a pain in the arse.
@njozsef211 жыл бұрын
hi. opensource firmware for imax, turnigy and other Bantam clone if need please search rcgroups 'cheali charger'
@Ripcurl77711 жыл бұрын
Hi TheFish7861, its my own tool i mad in this Video: "TUTORIAL: 1. How to make a ESC Flashing Tool"
@MCLERC889 жыл бұрын
Fake one u have , the real on is a sky-Rc
@01Hudesohn4 жыл бұрын
Not Fake... Clone.. I have Modell: B6 LiPo Balance Chager by ImaxRC. Lot´s of Videos "Sky iMax Chager" have Print the SKY on it.:D Thing No One need´s Flash Instuction´s for the Real Sky iMax B6 Chager.. ;)
@MmeHyraelle3 жыл бұрын
Clones are all over we cant all get the legit ones.
@octomoviecom11 жыл бұрын
new open-source firmware is github dot com, find cheali-charger. and enjoy the absolute accurate charger.
@kanarimentos70569 жыл бұрын
what are you doing bom
@WillieMcphee8 жыл бұрын
pass worded .zip file... care to share the password please ;) THNX
@Ripcurl7778 жыл бұрын
Hi Willie, the zip file isnt provided by me.. So i cant help you
@WillieMcphee8 жыл бұрын
im a dummy... it shows the password in the comment window when you open the file... Duh... THNX
@Ripcurl7778 жыл бұрын
no problem at all :) for the tool watch this vid: kzbin.info/www/bejne/rau7dqCsgtxgoaM
@mattivirta4 жыл бұрын
why not use arduino ide ,lot better peoples can understand this lot better than special tools avr shit and big mac shit.
@randomguy52216 жыл бұрын
thanks i just broke all my buttons removing the case like you suggested...
@HatarMyspace9 жыл бұрын
Good work. But way to advanced to for me.
@ninjaex45358 жыл бұрын
whats the password
@Ripcurl7778 жыл бұрын
Hi, the password is provided in the link on RCGroups. Sorry.
@StijnDeLatthauwer6 жыл бұрын
the password for the file is: thanks if you open the zip file with winrar you can see it in the description on the right