Immortal HDMI Synthesizer Tutorial

[@1StopCod]

long pressing k1 doesnt bring up anything, unable to configure

[@penceproductions9978]

Hello, only the red light is on in my fuser, the green light is not on. What could be the reason?

[@Sequresrl]

I bought one less than a month ago and the Overlay does not work, if I leave K4 pressed for about 10 seconds only the second Monitor works, apparently they are not of good quality

[@1StopCod]

as soon as i press make this my main display my background goes black and i cant no longer use my mouse

[@EWPMihlfs]

Did you fix?

[@utubedeedot]

4:30 is this main gaming pc or 2nd pc?

[@Merksta]

I’m having issues with EDID spoofing. Followed instructions but it’s still displaying the default monitors such as a MG25H for 1080p, and VG27AQ for 1440p.

[@immortaltechnologies]

Please contact us at [e-mail] if you are still in need of help. Also note that EDID spoofing is not required or recommended unless facing compatibility issues.

[@DMAhacks]

K1 and was working for and also k4 for 2nd monitor/comp

[@luigiesposito2481]

​@@immortaltechnologieshi friend, I have the main monitor 2k at 165hz, and the second monitor 1920x1080 at 60hz maximum, do I have to change the second monitor?

[@Virt7_]

@@luigiesposito2481I think so.

[@s9e6dy1]

My screen isn't like fully set, I see like black boxes on each side of the screen when on fuser and it's purple for some reason

[@brayankrul]

Mine too! did you fix it?

[@s9e6dy1]

@@brayankrul naw, I never did sadly, DMA is kinda dead ish rn ngl

[@Hrabryi]

Try to switch monitor color profile from RGB to YCbCr.

[@mirrored464]

My main monitor I can't change off 60 Hz but the radar of PC and fuser on 240

[@mirrored464]

Pink screen

[@immortaltechnologies]

​@@mirrored464 Hello, this issue can come up when you windows settings are not correct or the cables are faulty. Make sure your main windows system is outputting the correct resolution and refresh rate to match that of what the combiner can take. Feel free to contact us at [e-mail]

[@jikhjbjkl]

I have the same shit. Did you find a fix?

[@mirrored464]

slowly go up in hz 120 144 200@@jikhjbjkl

[@snooptiii]

I have same problem you find a fix?

[@Kufurbaz_haydo69]

Do we need to purchase a membership package after purchasing this machine or can we use it in every game?

[@arlohewitt6036]

show EDID spoofing Edid : im guessing you are able to use "get-edid" package to dump the normal montiors EDID, from this point what do i need to do in able to change the fusers EDID to this

[@immortaltechnologies]

We discourage EDID spoofing unless you are facing issues with Monitor compatibility.

[@iNZ-RxGe]

How to get both screens in the same monitor??

[@DMAhacks]

Just drag it over and on 2nd computer and or monitor

[@aaronjik1062]

mines was start at 60hrtz now i cant even get it up and running it keeps going black screen and then back

[@immortaltechnologies]

Hello, Please contact us at [e-mail] so we can help resolve your issue!

[@DominickDiaz-e1u]

Thank you for your help

[@gtadarkgamerblitz1603]

What if you use display port ?

[@roll808s]

Buy the dichen v6

[@Maldonado219]

Can't get my Hertz to stick to 144. They revert back to 60

[@timex7253]

How do you change the herz? I cant find it

[@Josh-in5ik]

How do you set up a kmbox

[@nahhhwhatnahhhwhat]

you start by setting it up

[@TheeDutchRutter]

What does this do?

[@immortaltechnologies]

Overlays 2 display outputs. A range of black/gray color specified by the user is eliminated on the top layer to see view the bottom layer's display output.

[@TheeDutchRutter]

@@immortaltechnologies I was hoping you’d say it helps the DMA’s work on the Xbox! Hahaha

[@سوريا_الجديدة]

hdmi does not support 2k more than 120 fps but my computer is 300 fps i will lose 180 fps !!! I don't think I will buy losing fps

[@ForLost929q]

Take it off buying one can you show that it works on Fortnite