Impala Factory Stereo Integration Build Part 2

Part two of the factory integration build. Covers routing the amp wire through the firewall via existing holes, and how to route to the trunk.

[@Goodfella9887]

This is exactly what I was looking for! You didn't leave anything out and used very clear explanations. Thank you sir! My hat goes off to you.

[@TheKrickard]

Routing the power wire through that grommet worked great. It took a little work to get that rubber block out of there, but I couldn't find any other spot to drill through. Thanks for the video!

[@michaelmeadows5142]

I don't know how long I've been looking for this video (Couple months?)- but I am GLAD I found it! I was going to give up and drill till I saw this! Putting in a different type of radio, but same type of run. THANKS!!!

[@kevincobb5182]

What is a 50 amp fuse going to do for a amp??? Put a 200 or bigger depending on amp! By the wat 2 bolts remove the water reservoir and then right near bottom of it use hole saw and cut a hole and you will not hit anything!! You can order a bulk head wire gasket on amazon for around &10!!! Zero guage runs no problem!! Worked perfectly in my 08 impala!! If you do it correctly all wires will run behind carpet and not show!! Add 2 battery in back please fuse at both ends for safety!!! Remember you need a big enough fuse to transfer at least what your alt put out!! Which is 125 amps for stock!! However if bigger fuse will help flow energy from rear battery for extra starting power if needed!!!

[@sdmjrhtc]

potential. also you need an aftermarket stereo if your want the proper outputs for ohms and volts to run a good system.

[@ronmraz]

Thanks for the video, I'm trying to wire nos rn and I was looking all over for this info

[@sdmjrhtc]

you need a diff adapter for impala w/ bose system because of the steering wheel controls. im looking at the axxess GMOS-LAN-01 on crutchfield i have an 07 impala lt w/out bose, its $129.99. but im going to run a kenwood double din reciever. i already have ran an adapter from my factory stereo to be able to use amp and subs. but if you want your system to sound good you need to get the full adapter and aftermarket in dash receiver. other wise you won't be able to access your subs or amps full

[@justinharris600]

How do u get the power wire up too the battery

[@robc6717]

I have a 2012 impala and i’m running it through the same way but there is a belt that is running pretty close to the power cable, any recommendations?

[@DestZero2022]

Thank you CE this is gonna make my life so much easier.. I used to have the Silver LS on the NAIOA site Name on there was Loveitdownsouth

[@kool-aidman5828]

Thanks for this video . man I looked high and low for a video that show how to run the power wire on this Car thank you

[@gregyoung5319]

Thanks for your time saving info

[@SnickasBah]

Good info bro. Thanks so much.

[@dickieradd]

I got the "A" version of the harness kit and tried attaching it back before the Bose amp and my sub/amp doesnt even turn on =[ damnit

[@wizzyhizzy]

Yo, its Wally. I thought I warned you about that rubber square chunk in the grommet where you ran the amp wire. Sorry bro!

[@jeremycarter6810]

thank you

[@sinister13cruz63]

my new 2015 impala has 2 battery's can I hook up an amp to the second battery

[@country_boy_t]

can I run 0 gauge wire through that hole

[@chrismcmurray8140]

Yes 0g fits perfect ..thats what I am running in mine. I know this is hella old, but maybe someone will see it that needs to know.

[@mallorycainjr.1921]

@@chrismcmurray8140 how much wire you think I would need to run wire for my second battery? I have an 02 Impala so I have a grommet on the passenger. I already have a wire running from the stereo battery behind the seat to the battery in the front but idk what's a safe amount of feet of wire to buy

[@pinoypridemf]

we're did u ground your amp?

[@BIGSABMUSIC]

I DON'T NEED TO KNOW HOW TO CHANGE THE FACTORY STEREO INTO A SYSTEM I NEED TO KNOW WHAT PARTS!........ I NEED TO INSTALL A AFTERMARKET STEREO IN!!!!!!!

[@stevenjr9205]

did you use the gmos Lan 012 harness? I bought it but unsure how to hook it up

[@martinpacheco7074]

we're did you get the remote

[@lildirt1892]

what size are your tires

[@kool-aidman5828]

Thanks for this video . man I looked high and low for a video that show how to run the power wire on this Car thank you

[@benfox383]

is that hole big enough for 0 gauge wire to fit thru?