Important and Easy Upgrade for 2021 Cheetah 125 - Rear Wheel Spacers

Correcting the narrow rear wheel width to better match the front. It should definitely come this way. 2021 Tao Motors New Cheetah 125 ATV Quad.
Update-- New design does not require new lug nuts.
Wheel spacers are from whygostock.com
www.whygostock...
4 Bolt 2 inch wheel spacers. 4 inch total added spacing between both sides. Fits rear hubs on TForce, Cheetah, 150 Bull, Rhino, Targa 150. Fits the 89mm hub ring found on Tao Motor units and some Coolster. May fit some other Chinese off brands. Center bore that will fit the hub ring is 3.5". Fits steel Wheels and Alloy wheels. No adapters needed. Our special design allow spacers to sit flat against the hub for a stronger mount. Actual spacers may vary slightly from picture. Does not fit Kayo Jackal 200.

[@user-qz8og2gm4u]

I think im going to go with that same 2" spacers, lol, I pretty much put spacers on all my vehicles even my trucks, cars, suv's included, so I might as well do the same for my son's new(to him) quad..... im so excited, I hope he likes it.

[@user-qz8og2gm4u]

again you answered all of my questions , great vid, love how you and lil' man handled them wheels together... I can't wait to see my son's reaction I'm gonna film the whole ordeal and all,,, I'll post my progress thanks man again great video's.

[@lesheath6216]

One of the main reasons for the tippiness on these quads is the unrealistically stiff front shocks. Find something a little more forgiving and you'll notice a huge difference!

[@robertomoreno5526]

I thought your where Billy Joe Saunders. Any way good work I'm hoping to do this to my go kart wheels one day .

[@USMC-Sniper-0137]

You should use a tapered bolt head to fit in the recessed tapered holes of the adapter otherwise you may have problems in the future. If not able to find, maybe tapered washers behind the bolt head. The lug nuts supplied are for mounting the adapters to normal studded hubs. Maybe a bolt in ??10 mm ?? from the back side that the tapered lug nut will fit on would work great.

[@audiss111]

Just picked one up for my son. With ur same shocks and the spacers. Thanks for the information man. I was unable to locate any "lug kit" at whygostock. So maybe they updated the spacers ?

[@toolstoys70]

@@audiss111 Plate def says New Cheetah not lynx. Sorry I deleted our convo. I didn't mean to reply from my personal channel.

[@audiss111]

@@toolstoys70 interesting. My manual says “new Cheetah” but the front plate says Lynx. That I can’t find any data on. Even my "title" says "newcheetah"

[@MuthaFukinLongboard]

Great video, got me buying all the upgrades now.

[@e.morales]

Were I can buy those Spacers for my Atv apolo blazer 2021?

[@Mad.Man.Marine]

I think they do that so when kids are riding around the yard turning kinda close to stuff you don’t hang up your rear wheel on something that your front wheel made it past.

[@user-qz8og2gm4u]

I've gotta watch this video , cause I wanna go pick up this quad that's for sale and im going to try to take the rims off so that it'll fit in the back of my SUV. hopefully it fits, it should fit if I remove the wheels. I have a 2012 Acura MDX , which is like a mid-size SUV... im going to let my seats down but that doesn't give me much space but hopefully its enough with the wheels removed

[@austinlarsen5984]

This man counted from 38-33 and said “5, that’s what I thought” 😂😂😂

[@thailand8224]

My 2022 does not have that lip. I did buy spacers.

[@BwHippie84]

Nice bro I'm sure the kid loves it. What sockets are you running? Looking to give my kid a little more torque

[@toolstoys70]

Running stock sprockets. Ours is nice n torquey. We didn’t want to sacrifice any top speed.

[@BwHippie84]

@@toolstoys70 can't blame you there. Ours has a 13 in the front going to swap out for a 12 so we'll see. I've already bumped up the carb to 22mm . Just doesn't seem to have the grunt out the hole.

[@toolstoys70]

@@BwHippie84 seems like we got a strong motor. I have heard people saying the same thing as you though.

[@BwHippie84]

What size tires are on that thing. We've got 19x7x8 on all 4

[@carlcraig9749]

How are you pulling a wheelie on that thing?

[@toolstoys70]

Mine’s got some torque I guess... Also I’m light enough for it to have power and yet heavy enough to use my weight to pull the front end up.

[@berglinb]

IT’S VERY IMPORTANT TO REMOVE THE LOCKNUTS ON THE BACK OF THE HUB BEFORE YOU TRY TO TAKE OFF THE WHEEL LUG BOLTS.

[@toolstoys70]

Yes for sure. I did indeed do that but didn’t really show it or mention it. Thanks!

[@josephwillard3421]

How do you like the overall of this quad.? Thinking about buying one this weekend

[@toolstoys70]

Getting ready to do my full review video very soon. Short story is I think it’s a good value. Very fun. Kids love it. However don’t expect it to feel like a can am or any Japanese quad. Quality wise it’s lacking. But I really have not had any issues with it. Starts and runs great, nothing has broke.

[@monsterreyes3672]

Hey my friend I bought a 2021 Pentora EFi. I wanted to know if you could help me out I’m trying to put spacers in front and back also like to buy SS rims. I bought a Chinese quad earlier in 2019 and I put spacers on it and also SS rims. I thought maybe you could help me with the size pattern on the Pentora thank you in advance

[@CX5EFWE]

These are good videos for the Tao Tao, do you know if this is the same quad as the Xpro Blazer? They seem to be other than body work.

[@toolstoys70]

Thx!. I'm honestly not sure. Taomotor is a huge company now with their own factory. Perhaps they make the parts for xpro too, however again I do not know. They do look strikingly similar.

[@CX5EFWE]

@@toolstoys70 yes, it is hard to know with certainty, seems the Xpro is a less expensive option, but I notice the new Tao Cheetahs have a digital dash which is really cool for this year, considering getting my son one. Thanks for all the good information, it is appreciated.

[@caesarmorado7541]

What was the bore size on the spacers you got and where you get the alloy lug kit if you don’t mind please

[@NeoStorm_401]

What should I torque that at please help? Do you know the specs to all this stuff. I can’t find it anywhere. Lug pitch size Torque Bore size

[@alankimi9967]

Do you think a 5'6 13 yr old fit with no problem? Im thinking of buying one soon, also great video!

[@toolstoys70]

Yes that is a good size for this quad. Will be fun!

[@jamiehennessee2994]

Will these work on the non alloy wheels? Can you give the link for the spaces please

[@tonybologna139]

What’s the bolt pattern?

[@mrkellum]

Been watching a few videos, and looking to purchase one for fun of course. What do you think about adding a lift kit to a Tao Quad or don’t bother?

[@toolstoys70]

I would be hesitant for center of gravity reasons but it would be a fun project.

[@mrkellum]

@@toolstoys70 Appreciate that

[@cotyleavitt4317]

What is the bolt pattern on the cheetah ? Is it 4x100?

[@tonybologna139]

Does it vibrate a lot when giving it full throttle?

[@toolstoys70]

Yes unfortunately

[@evanseymour4172]

💥💯

[@caesarmorado7541]

What’s the bore size and the size of the alloy lug kit that you bought and where if you don’t mind I’ve looked everywhere and no luck

[@toolstoys70]

3.5" bore size. 89mm hub ring. Mine are from www.whygostock.com/atv-wheel-spacers-for-tao-motors-atv-and-go-kart-2/

[@caesarmorado7541]

Thank you soooo much

[@caesarmorado7541]

What about the alloy lug nut kit

[@NeoStorm_401]

Hello, did you factory bolts come with nuts for the bolts or did you need to buy some. Mine don’t have buyers for the inside of the rim. 😩😁 help a brother out. Lol

[@toolstoys70]

Yes nuts were already on there from factory. I needed to buy longer bolts but I got those with the spacers at time of purchase.

[@toolstoys70]

Take a bolt off and head to hardware store and get the nuts that fit. Get either locking nuts or lock washers with standard nuts.

[@NeoStorm_401]

@@toolstoys70 that’s because of the updated wheels you have for longer bolts ?? Yeah I just ordered these spacers. Love that they fit flush. 💯✔️

[@toolstoys70]

@@NeoStorm_401 Yes with the wheels mine has it needed longer bolts.

[@japanesecinema6736]

I am thinking about picking up this atv to just drive around my yard/neighborhood. Is it fun for an adult?

[@toolstoys70]

It’s actually really fun in the yard/neighborhood! That’s basically what’s it’s best at. Yes it’s great for adult riders as long as your not VERY tall or VERY heavy.

[@japanesecinema6736]

Im 5'10 trying to get down to around 165.

[@toolstoys70]

@@japanesecinema6736 ha I’m 5’11 165. Pulls me around the yard easy. It’s a little bit small which makes it more fun.

[@bradmollohan498]

Where did you get the spacers

[@toolstoys70]

Whygostock.com

[@russellfurr37]

Where do you order the rfy front shocks for cheeta 125.

[@toolstoys70]

Either Amazon or eBay

[@jericho2619]

Do you think those spacers will work on an Apollo 125 atv ?

[@toolstoys70]

Honestly I'm not sure. They didn't list that model for its application. It appears the Apollo is also 4 lug. But the hub size needs to be the same and I haven't verified that.

[@jericho2619]

@@toolstoys70 Thanks for checking. Apollo’s are 4 lug

[@alejandrobenitez4560]

Do you think it will be the same for a 125cc coolster.

[@toolstoys70]

From what I can tell yes the coolster has the same issue with the rear wheels being much narrower. But don’t quote me on that…

[@fwdlo]

@@toolstoys70 yes they are to wide in the front

[@devinlogan7766]

How tall are you?

[@toolstoys70]

5'11"

[@got2getit204]

Not for 114$!

[@toolstoys70]

Yes they are pricey. Very high quality part though.