Important Things You Should Know if You Use Resin

Hi Everyone. This is a must watch video if you use resin and want to make sure that you are getting the best results, not wasting money or time. I demonstrate what happens if you use a torch on moulds, mix your resin without following the manufactures instructions as well as other tips on ensuring success. I hope you find this useful.
🎥 CHECK OUT THIS VIDEO on using Mica Powder to create feathering: • Easy Resin Feathering ...
📹 Check out my new KZbin Channel: / @stevemcdonaldcrafting
📬 If you would like to post something to me, please use:
PO Box 277, Newmarket, CB8 1GY, United Kingdom
👕 Steve McDonald Arts and Crafts merchandise is finally here. Check it out from the store or use this link to see what’s on offer: / @stevemcdonaldartsandc...
😍 CHANNEL MEMBERSHIP comes with additional perks including members only live streams and a VIP Facebook group alongside, support for anyone at any level of their resin journey to benefit from, plus more. Check out the perks by clicking the JOIN button on the link below. / @stevemcdonaldartsandc...
☕ TO BUY ME A COFFEE. Every contribution is very much appreciated and allows me to keep making regular videos. www.paypal.com/paypalme/SMcDo...
✍ Check out my new Website: stevemcdonaldcrafts.com/
💻 As an amazon associate, I earn from qualifying purchases.
LINKS FOR MATERIALS USED FOR BOTH THE (USA👍) AND (UK✊) ARE BELOW:
⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇
LINKS FOR USA (USA👍Only)
(USA👍) Resin: jdiction.online/?ref=w6l74mbw04 amzn.to/3vovdAC
(USA👍) Measuring Pots: amzn.to/3wBDnFZ
(USA👍) Nitrile Gloves: amzn.to/3fDxfGg
(USA👍) Full Face Mask: amzn.to/3fhg4ve
(USA👍) Derma Shield Cream: amzn.to/3ue1clu
(USA👍) Long Neck Lighter: amzn.to/3hSc6Lm
(USA👍) Torch: amzn.to/3bSkOFg
(USA👍) Coaster Moulds: amzn.to/3ujoW7K
(USA👍) Weighing Scales: amzn.to/3ue1Hfm
(USA👍) Wooden Sticks: amzn.to/3oVMw9K
(USA👍) Baby Wipes: amzn.to/3fDy2XK
(USA👍) Plastic Spoons: amzn.to/2Som9Nl
(USA👍) Digital Thermometer: amzn.to/3fKVH8x
LINKS FOR UK (UK✊ Only)
(UK✊) Resin: resincolour.co.uk/shop/ols/ca...
(UK✊) Measuring Pots: amzn.to/34myzYF
(UK✊) Nitrile Gloves: amzn.to/3oPomO3
(UK✊) Full Face Mask: amzn.to/2SqYzPU
(UK✊) Derma Shield Cream: amzn.to/2Srgcz6
(UK✊) Long Neck Lighter: amzn.to/2QNyutY
(UK✊) Torch: amzn.to/3vox20q
(UK✊) Coaster Moulds: amzn.to/3oZEgFP
(UK✊) Weighing Scales: amzn.to/3oUQu2f
(UK✊) Wooden Sticks: amzn.to/3usYPvr
(UK✊) Baby Wipes: amzn.to/3wCTcMF
(UK✊) Plastic Spoons: amzn.to/34gP9t2
(UK✊) Digital Thermometer: amzn.to/3wylnvU
Chapters:
00:00 Introduction to tips being covered
01.43 Personal Safety
03:45 Different Resin
03:49 How to Measure Resin
07:29 How to Mix Resin Correctly
08:16 Why It's Important to Decant Mixed Resin
12:04 Adding Colour to Resin
12:48 Why You Should Never Use a Torch on Silicone
13:54 How to Clean your Mixing Pots
16:56 Example of Damage to Silicone Mould if You Use a Torch
Important Things You Should Know if You Use Resin
Important notice:
Although I often talk about health and safety in my videos, please make sure you do your own research and take the relevant precautions to ensure that you are protecting your health. I am not responsible for anyone using resin and not taking the correct safety precautions. Resin is a chemical and as such should always be treated with respect and the manufacturers safety advice taken.

[@natasja1977]

Love the video. I don't get why alot of people don't do anything about protection. I'm happy to see that there are resin artists that do take care of themselves and talk about it

[@kerielwatson3197]

The fact I tend to not use protective gear is why I won't ever post videos online. I don't want to encourage anyone being an idiot like me. Having said that I'm doing better wearing gloves now I've found some that fit tightly but without breaking. And I do use a respirator with any that list it in their ppe instructions.

[@kay9520]

as a retired safety technician, I appreciate your discussion of PPE!

[@garryfunkgaming5918]

I just tip my silicone cups upside down after I use them ( I have the silicone mats lol) and the resin pours out and is Easley pulled once it sets. Cam turn them inside out an use a wipe then to clear. That's just a technique I found easy to use though.

[@annieoccident4459]

and tape to get all the little leftover bits ;-)

[@daricezdrazil7399]

Nice idea about the tape

[@faieriemama64]

That's a great idea we use tape but never thought about just typing then upside down. We've been scraping then taping. Ty so much.

[@tracygilder1229]

Oh dear I’ve been using a torch, now I know why I have so much trouble getting them out of the moulds. Thanks Steve

[@bonny9680]

Interesting to see the difference in the "pattern" on the torched and lighter coasters. Nice informative tutorial Steve :D

[@eleayafrost7951]

I appreciate you doing all of these tests and experiments, so that I don't have to.

[@halldoralarsen86]

Love the British way of saying pipette. New memory acquired

[@thecupcakefoxblog]

LOVE tip #3. It’s SO helpful to write it on the container, but I wouldn’t have thought of it.

[@ps3845]

Bless you wasting money you can't afford for the greater good of others your truly a star xx

[@Denise11Schultz]

Since you first told us how to clean up, I much prefer using the non-alcohol (and unscented) baby wipes. You also benefited our local Humane Society, who now uses them in their big adoption van. They had plenty of toxic cleanup options, but this became their go-to for those 360 mile trips to the big adoption center in Portland, Oregon. So the animals in their crates don’t have to smell the awful stuff for all those miles. You never know where your good help will land, thank you for sharing ☺️🙏🐾.

[@jeanynesaylor3827]

Thank you for telling people about the fading alcohol inks! I get so sad for people who have no idea the lovely petri art and such will often look like vomit in just a few weeks to months. So disappointed when I realized that the hard way. Always useful info 😁

[@billmarsey7850]

Hey Stephen spill again. Don't worry about them a-holes out there that give you a hard time you're just out here trying to help people. Safety is first and I really like that with you. You keep doing what you're doing, because it's a great job. Thank you your friend bill

[@nanapaula1031]

And this why your the only subscribed group I have you make things sound simple and explain everything plainly Thank you

[@nanapaula1031]

@@SteveMcDonaldArtsandCrafts It’s true you make things sound easy to do

[@sistacee36]

Thank You Steve for showing everyone simple ways to make their resin experience safe, fun, effective and economical. I learn something new with every video you share. You also remind me of some of the common mistakes that can be avoided with a little patience. Most of all you remind me to have fun and be myself. You are truly appreciated.

[@dollybrown1993]

Such a large amount of valuable information. I've gone back to watch your videos on PPE many times, I'm still learning from them. What you showed today is so useful to know. Especially about WHY NOT to use a torch... The camera even picked up the torch causing the resin to smoke. People sometimes forget that resin is flammable!! Thanks again for teaching some and reminding others of us of proper resin safety!!! 🎶🎶🎶📽🎥💖💋

[@daricezdrazil7399]

Steve, only kick back should be good things! You are an incredible and smart teacher. You damaging your own things to show what can go wrong only hours to show how much you care and want others to know so they don't make the same mistakes you have made. Just remember Steve, not every student will understand at that moment, but later on when it has come to realization, they will think back to when the teacher took the time to educate them and say, oooh now I get it! He knew what he was talking about and I should have paid attention and listened. And Steve, you are a teacher!

[@Denise11Schultz]

I noticed that when I don’t get all the little bits of dried resin out of my mixing jugs, it can change the measurements, they’re off by the volume of the stuck-on bits.

[@mariak.chalmers2577]

One of the most useful videos on resin that I have watched. Thanks Steve.

[@galady8632]

Your focus on safety is significant. Thank you for 'teaching by example'. Yes, it definitely makes a difference.

[@sandyeubanks4972]

Thanks for your help

[@judyeuller7602]

Thanks, Steve!

[@janawest7186]

Thank you for showing us!

[@DeborahOlander]

Great advice.

[@lolameese]

Thank you for showing this

[@chriscouri4149]

Thanks! For your help.

[@Cassycat99]

Thank you!

[@readbycandle7489]

Ooh this is brilliant! Thanks 🙏

[@mmathulosejake]

Great and informative

[@diegooland1261]

this is very helpful, thank you

[@alisonfp13]

Thank you Steve love you 🎉

[@annawesker675]

Thank you for all the tips! 😊

[@Twiggymack48]

Thank you Steve, you are awesome

[@tonygray3135]

Great video Steve

[@CarolynSteven-qu8km]

Thank you. Very helpful tips.

[@markduggan3451]

Full of good information.

[@mustafabahrainwala627]

Thank you so much this is very helpful

[@debbrady497]

Thank you! 🌸🌻

[@margaretzuelke9761]

Thank you for the valuable information!

[@annewilson8951]

Great video.

[@jamesrobertson253]

watched this video a few times and I've learned once again how to clean my moulds .

[@barbaraborden1089]

Very useful information, thank you

[@richardtrenchick]

Thank you! Great info and you are so fun to watch!

[@mjrcox76]

A very knowledgeable video!! Thank you!!

[@maryellenrichards391]

Learning so much from you as I go back and look at your videos. Thanks for sharing your knowledge.

[@daniellenunn-weinberg5381]

I watched the safety video first! 😁 Thank you!

[@debbeneman9792]

Thank you for this video Steve. Very useful information. Love all you do Steve. 😃

[@joyceengland8781]

A lot of useful information! Things I didn’t know.

[@lnc-to4ku]

This was such valuable information that you gave us! I appreciate you so much!

[@tracybrightlitecraftyartis1178]

Your such a joy to watch and listen to🤗! I love this!!

[@witch1370]

Thanks for the information 👍👍👍 Its very clear thanks 👋👋💕💕

[@mrs.b1789]

Thank you! I’ve learned so much from your videos! keep em coming!

[@cynthiacarr3294]

Very good video very helpful indeed Thank you Steve💯👏🏽👏🏽😁

[@melb3513]

Thank you for the time and product in that video

[@TheCraftingNook]

Awesome tips still watching 💕

[@larrijohnson4885]

I am just starting this craft. Thank you so much for sharing your knowledge.

[@decadefacade]

Love your videos

[@rkhnd51]

Thanks Steve. I'm a beginner and this was very helpful.

[@1tribble]

You have a lovely spirit…

[@cynthiaperdomo3988]

Thank you for this important information. I am just starting and really needed this.

[@denisecondina6655]

Thank you Steve for this Resin video...i can rewatch and always learn something new. Please keep them coming. Many Blessings!

[@cyn7869]

Oh my gosh, thank you Steve! So informative for us. Love these types of videos as much as the “ tries”.

[@ARTWITHDORIS]

Great information...it was worth it !! Trust me.💖

[@dianavaneck3286]

thank you soooo much for your video I need it

[@kathydunn]

Wow! I won't be using a torch on my resin! Thanks for the information, it is very helpful.

[@dulceteixeira9097]

Good tips! Thank You 😊 x

[@dulceteixeira9097]

@@SteveMcDonaldArtsandCrafts Thank You so much 😘 you do give me a lot of support and great help when it comes to resin 😘

[@jeanwilcox3464]

Your such a love bug💖. Love your tips!

[@angie19057]

When i first played your video - You just made me smile! Love your channel!

[@christinebartleson3838]

Thank you so much for this video. I am brand new to resin and your videos have been extremely helpful. ❤️

[@kellyhards8828]

Thank you for the info! I'm BRAND NEW to resin.

[@DucksAhoy]

been working with resin for years and am still enjoying videos like these. Always learn new tips!

[@vicviper13x]

I JUST started getting into this and my lord I’m glad your video popped up. Thank you for posting this.

[@paulinefletcher]

Hi Steve, Thanks for this video am just about to use resin for the first time so this was very helpful..

[@RHG412]

This video was BRILLIANT and JUST what I needed! Definitely going to go to the PPE video right now! Thank you so much!

[@fay136]

Thank you for your videos. They are all super helpful. Love your voice. Love your hair. ;)❤

[@shellishaevans5815]

Thank you so much for your videos. I have done a little bit of resin work in the past but had several issues getting my pieces to the level that I've wanted them. I have learned more from you and your videos than I have from any other source and I really appreciate it!

[@LEDewey_MD]

I recently stumbled on your KZbin channel, and find your information to be amazingly useful, as I am only now trying out resin molding (painting and drawing are my usual things). This video in particular is extremely informative! Thanks for what you do!

[@marboodogz1665]

Thank you for this .. I am just starting my journey so watching all videos starting with this one

[@abbywagner6240]

Thank you so so much for taking the time to make this video!!!!! I am so happy i stumbled upon this channel!!! Your video is amazingly perfect, easy to understand and so helpful!!!!!!!!! I'm now going to bingwatch your others!!

[@Jenniecanova]

I’m so happy I found you! You are such a stand out from all the others. Just love your videos and help as I am a complete beginner feeling nervous and trying to find the best to learn from.. 😊 thank you 😊

[@cathyhall7457]

I plan to start doing resin after I move... I love your videos.... you are very educated and very informative... thank you...

[@lueannabracha2472]

Thank you for the video! Off to watch the safety video.

[@williammuse9748]

A Very useful video. I really like your channel. It's always informative and entertaining.

[@angiegriffiths7177]

Great informative video Steve especially the part with the resin I thought the larger the container the longer cure time but oh boy u confirmed my mistake earlier this afternoon 🥲

[@someguitarphreak]

I'm really glad that I found your videos! I want to get started with resin and haven't seen any other videos mention using PPE. I'm adding that to my initial setup!

[@cooolpotato]

You're such a character - it threw me off at first but I've really grown to appreciate it! Thanks for more helpful insight!

[@stacyk716]

Thanks for the great video. I'm new to resin and am learning a lot from your channel.

[@nancykowalkowal3078]

Thank you for getting back to me, I was asked by a friend to do a pour and resin on a pair of designer eye glasses, thank you for reminding us to be cautious and to follow instruction , thank you

[@robjtko]

Hello my friend. I haven’t gotten to watch this video yet but can’t wait to see it. As always thank you and GOD bless!!.. :)).........

[@synergyttm9255]

I am so glad i ran into this video because i was going to by a torch for my jewelry molds. WOW THANK YOU!!! I am on a serious budget and cant afford to lose any materials. So this kept me from a huge loss. Steve. You're appreciated!

[@inspiredbystarr]

I love your channel

[@kimmiesunshinebubbles1020]

Your a gem

[@JustCallMeMeghan]

Thanks for making a point about PPE. Watching all of these TikTok videos of people handling resin without so much as gloves just make me cringe.

[@angelabertrand9684]

omg thank you so much, I am just about to pour for the first time in a silicone mould and I was totally going to use my torch! Phewph! I will now use a lighter....

[@sarahelliott5790]

Really informative Steve, thanks. As you know I've just started using Epoxy. I did have quite a few bubbles when I mixed - probably due to mixing to fast. Plus it did start to cure in the big mixing pot!

[@beansproutmomo]

Thanks so much for all the great info! I generally prefer to use a heat gun vs any kind of flame or torch. My molds have lasted longer, and it doesn't cause any fires with alcohol ink fumes.

[@sdrawkcabsiemanym]

I bought my daughter's scales, and now I know where I went wrong after making up their resins (as it was 50/50 mixture) thanks

[@shakesbits5220]

I'm just a beginner but I've been watching tutorials for almost a year and yet there's still be info in this. I'll try wiping out the silicone cups right away. I've left them to cure until the resin was set enough for demolding and then turned them inside out to clean out the bits. That's worked well so far for me but maybe I DID reduce their lifetime...

[@DorianneDelageArt]

Very usefull video ! Hope that a lot of people will watch ! When I see some people using resin without gloves or mask or... I am 😱😱😱😱

[@LisaVornhagen]

Thank you for that video. It's very informative and very helpful to see what can actually happen. I only use a heat gun on my resin. Knowing me if I used a long neck lighter I would end up catching my mold on fire or at least melting it!

[@LWJCarroll]

Thanks that was very useful.... Laurie NZ

[@judethfenton5978]

Great tutorial. It's a shame you had to waste money to show these great tips but I really appreciate the fact that you've done it. So many presenters are so blasè with their torch, I would never have guessed how harmful they can be. Equipment and tools are too expensive to mistreat in this way. 👍 for the PPE warning. Again you see so many risking their health you start to think the danger is exaggerated. Thank you.!.