Curious, I swapped the module from the A700W to the F91W. And the result turns out great.
Пікірлер: 67
@JenniElleАй бұрын
Really enjoyed this - thanks for showing us the swap!
@SamsWatchReviewАй бұрын
Thank you for watching :)
@syakriansyahrovski570411 ай бұрын
I've seen people modded their f91 to have two led instead of one, but this mod is great if u have two a700
@faruqjamadar86246 ай бұрын
Very nice 🎉🎉🎉
@SamsWatchReview6 ай бұрын
Thank you! Cheers!
@dantepaule43119 ай бұрын
Excellent...
@SamsWatchReview9 ай бұрын
Thank you:)
@roadgent792110 ай бұрын
You seem pretty good at mods. Had you considered modding an SKX with a VH31 movement? There seems to be some interest across the internet for this. Thanks.
@SamsWatchReview10 ай бұрын
Not that good, trust me :D But thanks for sharing anyway, sounds interesting to try
@roadgent792110 ай бұрын
@SamsWatchReview Oh go on give it a go! I'd do it myself if it wasn't for this shrapnel I picked up in 'Nam. 👌
@shamshadansari1765Ай бұрын
Light 🚨 is always an issue 😂
@ranggaahmedkahuripan99043 ай бұрын
Pronun lo ga bisa bohong sih bro, mantap lah. Btw gw juga baru mulai belajar mod f91 😂
@SamsWatchReview3 ай бұрын
Ya gimana lagi, mau dilatih kaya apa, ketemu nasi uduk semur jengkol, ya reset lagi ahahaha.
@kedaikayuh2108Ай бұрын
@@SamsWatchReview bisa modifin punya saya mas? minta nowa nya mas
@luisferreira784511 ай бұрын
Now tempted to do same. The problem is that the A700 is not mine, it's my wife watch 😅😅
@SamsWatchReview11 ай бұрын
That's a very different condition :D
@luisferreira784511 ай бұрын
@@SamsWatchReview very much 🤣
@sultanqasim76395 ай бұрын
If she’s had it for a while, I think she’ll appreciate a brand new one while you use the old parts to mod it
@cunawarit4 ай бұрын
The SKMEI 2056 and 1412 are an excellent alternative to the F91W and they have a much nicer back light. I have a couple of 2056 and the functionality of the module is nearly identical!
@SamsWatchReview4 ай бұрын
Thank you for sharing :)
@goodnota3 ай бұрын
how's the accuracy on those ?
@TE_533493 ай бұрын
was looking at getting one of these and sticking the casio faceplate on
@cunawarit3 ай бұрын
@goodnota they vary. I have 8 SKMEIs, and one is the most accurate watch I own, half a second a month. Others, well, not as good but comparable to Casio DW5600E.
@bugdrvrАй бұрын
@@cunawarit I've found the same thing. I've only got three Skmei watches but one of them is as accurate as my Casios and the other less accurate two are still less than a minute a month. Not super accurate for a digital but nothing that I'm going to worry about, especially for the price.
@os-qt1hc8 күн бұрын
man, so I could fix both the light and get rid of that annoying buzzer sound? coool
@TheScalawag4 ай бұрын
Do you happen to recall what size spring bar you sacrificed for the spring?
@SamsWatchReview4 ай бұрын
I forgot the length, but it's the slim/small generic spring bar, not the thicker one
@TheScalawag4 ай бұрын
@@SamsWatchReview I had a generic spring bar kit from Amazon in my watch tool box from and the little copper spring in there worked perfectly, just like in your video. Thank you! I now have the F91W that Casio should have made themselves. :)
@SamsWatchReview4 ай бұрын
@@TheScalawag awesome, congratulations!
@unzulaessig5 ай бұрын
will the A168 module fit in a F91w case?
@SamsWatchReview5 ай бұрын
Frankly, I haven't tried. But looks like it's going to be too thick for the case :)
@RobertNES81611 ай бұрын
I'd just keep the A700 and sell F91w. I used to have an F91w and don't miss it at all since I bought the A700.
@diglettdigdig29 күн бұрын
Interesting video! Why not just do the backlight mod for the f91w?
@SamsWatchReview29 күн бұрын
I happen to have A700 rarely worn, and the most important reason is that my soldering skill is not the best :D
@diglettdigdig29 күн бұрын
@@SamsWatchReview there are backlight mods that don't require soldering! Just installing a backlight spreader and changing the paper. Took me 15 minutes!
@BarneyRolls8 ай бұрын
Why didn't you simply stretch the original spring ?
@SamsWatchReview8 ай бұрын
That can also work, but will deform/stretch out the spring. I'm planning to reinstall the module back into the A700 in the future, so I want the springs to remain at their original length :)
@m.s.79603 ай бұрын
Can you do the same with the Casio W59 ? Thank you
@SamsWatchReview3 ай бұрын
Could be, but sorry, I plan to keep my W59 as original as possible :D
@user-yc5jc1le2c2 ай бұрын
What tools are you using?
@SamsWatchReview2 ай бұрын
wire cutter
@kripiktempic3 ай бұрын
Is it still waterproof after moded?
@SamsWatchReview3 ай бұрын
Yes, as long as the installation of the seal and back cover is correct
@turkerboss4981Ай бұрын
can you change bigger battery
@SamsWatchReviewАй бұрын
Sorry but I don't know how to do that modification :)
@5weating_8ullets6 ай бұрын
What is the mod sir at 1:17 ?
@SamsWatchReview6 ай бұрын
Hi, that's an NFC mod, our video here kzbin.info/www/bejne/l3jRY5KwhZ16f5o
@5weating_8ullets6 ай бұрын
@@SamsWatchReview thank you so much!!!!
@Y0u7u8e.Ай бұрын
I would rather keep the a700 and ditch the f91.
@gameboy3chudАй бұрын
I would agree but still good to know
@bogiperiklastv826211 ай бұрын
Kok nggak diganti sama mesinnya A168 aja min? Kan lampunya jauh lebih bagus A168
@fey469211 ай бұрын
modulnya ketebalan itu kalau dipindahin ke f91
@SamsWatchReview11 ай бұрын
Iya, terima kasih sudah bantu jawab :)
@user-yc5jc1le2c2 ай бұрын
Is it still water resistant
@SamsWatchReview2 ай бұрын
yes, it is
@dtuk222 ай бұрын
All this fuss about the F91 w back light....it is what it is.
@indrameilanton10 ай бұрын
This time I have to disagree with you Bro... For me, every watch has it's unique personality just like a person. A module is a soul for the watch, it's what's make the watch is unique. No heart feeling. Just want to share my opinion. 😅
@SamsWatchReview10 ай бұрын
Lho, kok bisa ? :D Fair enough, there are many point of view and I can understand yours very well. Have a great day :)
@watchingdanny3 ай бұрын
I wonder if you couldn't have just switched the case backs too.
@SamsWatchReview3 ай бұрын
Haven't tried that, but the thickness is mainly from the case, not the case back profile :)
@watchingdanny3 ай бұрын
@@SamsWatchReview I meant because then you might not have needed to make a longer spring to reach the speaker on the case back. 😬
@technics18007 ай бұрын
why do you need two watches to make one good one
@SamsWatchReview6 ай бұрын
Some people love the f91 aesthetic but really need an upgrade for the backlight. But if it's not for you, then it's not for you :)