The sequel to my last video, I replace the fuel pump.
Пікірлер: 57
@MrWrong332 жыл бұрын
I have a v6 new edge , but live in the UK , no garages here want to touch it , so on my own for repairs ( Joy's of owning an import ) , need all the repair tips I can get , thanks for this
@justilianoacevedo50303 жыл бұрын
Yes fuel pump has been contagious with me now my Mustang has fuel pump defect. Your video on how you rebuilt your Mustang gas pump is very educational. I learned how to the way you did it. But I already brought the whole gas pump unit and will be installing it. One thing you left out was your method on how to safely bring down the tank with using adjustable straps. Now that I saw that I will use as well. Thank you for the best video ever 👏👏👏
@genericdude65512 ай бұрын
Good job. If you break that yellow retaining clip good luck in finding a replacement. I like how you used those straps to drop the tank - I might try that next time instead of using a floor jack. If you do order a complete assembly with the housing, check that you can easily replace the fuel pump like this. Some aftermarket stuff isn't nearly as easy to replace a fuel pump as the OEM housing - reuse your OEM housing if you can. Be careful heating those hoses! (Don't use a heat gun) By the way, if your tank is full it'll be more difficult to drop that tank. Yes, I'm speaking from experience. I'm currently in the process of replacing my fuel pump but since I can't find a hose to replace the one I broke on my aftermarket housing I ordered a new pump with a supposedly OEM style housing (I can't find just the housing without a fuel pump) - that's why I say to be careful with buying aftermarket housings because it appears they usually don't want you to be able to replace the pump - they actually admit to that. Keep you OEM housing if you can! 2002 Mustang GT.
@gayden4669 Жыл бұрын
thats actually smart using tow straps to lower the tank never thought of that
@5litreho2 жыл бұрын
Very informative video ! I like the ratchet strap method better than floor jack. I have a 2004 Mustang GT Convertible. My fuel pump just went out 2 days ago. Instead of the $30 pump you installed, I opted for a nice Bosch full assembly for $95. My car has 150k miles
@LakaiLegend693 жыл бұрын
Been watching you videos for a long time. You're videos are actually what help me decide to get a newedge! Keep up the great videos!
@itsnotan83 жыл бұрын
Thank you, I really appreciate that! It really means a lot! Congrats on getting your new edge! They're starting to get rare, I see less and less all the time.
@LegoFire243 жыл бұрын
best new edge mustang on youtube 🙌🙌🙌
@itsnotan83 жыл бұрын
Thank you! Idk about that, but I appreciate it!
@davidhayes29284 ай бұрын
Real good video. Good luck with your Mustang. Keep it forever.
@TheDeathCards3 жыл бұрын
Gotta love those fuel line connectors!
@andrewjaudon29683 жыл бұрын
I just did this. After you change the pump check your 20Amp fuse after install. Somehow I blew the fuse and after install wouldn’t start. Killing my morale and ended up changing the CCRM for $150 before I rechecked the fuse.
@Jas_1173 жыл бұрын
I actually just got a 2000 V6 mustang for my first car haha
@TheDeathCards3 жыл бұрын
Also i really prefer the bolt in method they used for the mustang. The f150s have a lock ring style pump. They get rusty and are a bitch.
@itsnotan83 жыл бұрын
I like it better as well. The Bronco has the lock ring kind too, and it was rusted badly.
@Pure_Flow Жыл бұрын
This is so helpful! I have an 02 3.8 and mine has 191k but I think mine is starting to fail so going to do this soon. I have Flowmaster idk yours but it sounds so good 🙌
@hermanrogers13252 жыл бұрын
Sharp car and very good job you did well done and you save a bunch of money since you did the work your self
@barryd7223 Жыл бұрын
Hi, did your Kemso fuel pump work ok ? Need to change mine and was thinking of using the same. Thanks
@genericdude65512 ай бұрын
Did you happen to measure the dimensions of those rubber feet that go on the bottom of the housing? I seem to have lost mine.
@MaxHPep3 жыл бұрын
Great video man. How were you able to clean the fuel tank with the fuel pump holder in the way? I have a lot of contaminants in mine, and I'm not sure if it's feasible to clean or if I should just replace it
@itsnotan83 жыл бұрын
Thank you! Granted my tank didn't have much trash in it. What I did was I kept sloshing the gas back and forth by pickup up one side of the tank. Sort of washing the sediment to settle to the side I wasn't picking up. I used a pump to kind of "vacuum up" the sentiment and pump out the tank. I had a filter in line before the pump so I got out clean gas I later used in my generator. If it's rust and the tank is rusting, I'd replace it.
@kenji15993 жыл бұрын
Haha, I literally just started this project a couple days ago. It was whining and the engine sputtered at ~4000 rpm so I couldn't stay in the optimal power band. It finally broke so I have to do all of the work next to the curb in front of my house.
@itsnotan83 жыл бұрын
Yep, sounds like the fuel pump was getting weak before it gave out and it was starving for fuel. Hope you get it back up and running soon!
@Jas_1173 жыл бұрын
Heyyyy I'm your 600th sub congratulations!!
@itsnotan83 жыл бұрын
Ayee thanks a lot man!
@Jas_1173 жыл бұрын
@@itsnotan8 you deserve it!!
@doobyboy21 Жыл бұрын
I dont understand why people are still using these gas hose removal tools... They take forever to remove the lines... I just use a small flathead screw driver and it takes me around 10 seconds max !
@00GrnGT3 жыл бұрын
I got lucky getting a free Fore innovations duel fuel pump fuel hat..bad thing is the folks at Fore Innovations can't tell me what model it is..🤣
@abner04042 жыл бұрын
I used the plastic fuel line disconnect tools forever seen some metal now I'll never go back to the plastic ones lol
@hermanrogers13252 жыл бұрын
I have a 04 mustang GT automatic dark shadow with a 181,922 miles and I had to pay over 600. Dollars to replace my fuel pump but next time I will do it myself
@ufartface2 жыл бұрын
carefully cut a hole under spare tire well - my pump was $11 works great and easy to change next time
@oscarguzmanz3 жыл бұрын
Hey, I recently ordered a new tank for my 99 mustang, however I was trying to pull out the valves from my older one. I can’t seem to find how to pull them out. Any ideas?
@itsnotan82 жыл бұрын
Sorry, late reply. If you haven't already figured it out, I don't quite know what you mean by valves?
@oscarguzmanz2 жыл бұрын
@@itsnotan8 @21:14, the blue parts are what I had a hard time with pulling out. I ended up pulling them out, however I’ve been searching all over the internet for new valve seals which go around the blue parts and have not found a match. About a week ago I ended up ordering a valve seal from cjpony parts for the modes of 98. They did not have a seal for 99 so I just ordered it too see if it would fit. My luck, it doesn’t fit. It’s too small. I’ll end up sending it back and trying to look for new seals
@itsnotan82 жыл бұрын
@@oscarguzmanz I don't see anything blue at that time stamp. You mean 9:14? If so I found hexagon shaped seal on the one furthest from the camera www.cjponyparts.com/fuel-tank-vapor-valve-seal-mustang-2000-2004/p/HW3955/?gclid=Cj0KCQjwqp-LBhDQARIsAO0a6aIq2PaRlJTiFVm9xH4IRyJythXhKuX3cql-nypswtS8EGl59BnK56kaAqs4EALw_wcB The big one closest to the camera I found part numbers XR3Z-9B076-AB and XR33-9B076-AB but no luck on them in stock. This is the part itself and looks like it comes with a new seal www.tascaparts.com/oem-parts/ford-valve-assembly-pressure-regulator-yf1z9b190aa?origin=pla&gclid=Cj0KCQjwqp-LBhDQARIsAO0a6aILnLzo9LWUAq_UuUOgwXhR8aubjykns7LvTcE3Rw15eBHnGiYuGDIaAosPEALw_wcB
@itsnotan82 жыл бұрын
@@oscarguzmanz Here's an Amazon link to that same part (YF1Z-9B190-AA) www.amazon.com/Ford-YF1Z-9B190-AA-VALVE-ASY-PRESSURE/dp/B000NU5LEC/ref=asc_df_B000NU5LEC/?tag=hyprod-20&linkCode=df0&hvadid=385112315202&hvpos=&hvnetw=g&hvrand=5583003838583574482&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9009542&hvtargid=pla-822727909196&psc=1&tag=&ref=&adgrpid=81184753169&hvpone=&hvptwo=&hvadid=385112315202&hvpos=&hvnetw=g&hvrand=5583003838583574482&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9009542&hvtargid=pla-822727909196
@ufartface3 жыл бұрын
i cut a hole under the spare tire well and removed the fuel pump- much easier next time
@justilianoacevedo50303 жыл бұрын
Good idea I will go that route
@abner04042 жыл бұрын
Do you have any gas smell when you drive now
@ufartface2 жыл бұрын
@@abner0404 no gas smell- totally inside the tank thats sealed off when you return top plate
@FranksShitBoxCollection2 жыл бұрын
@@abner0404 if you're smelling gas it's probably your fuel filler neck grommet/seal/gasket.
@ufartface2 жыл бұрын
@@FranksShitBoxCollection didnt have to fool with that
@ufartface2 жыл бұрын
dont need to remove level sensor
@kblopp2 жыл бұрын
Considering how much of a pain in the ass changing a fuel pump is you shouldn't buy cheap Ebay bullshit, buy a fuel pump thats made in America like a Carter fuel pump.
@codybaker44733 жыл бұрын
V6 gt? Never heard of it.
@itsnotan83 жыл бұрын
V6 & Gt is what I meant. I was gonna put "99-04 Mustang V6 Gt Mach 1 & Cobra" but I remembered the Mach 1 and Cobra have return style fuel systems.
@codybaker44733 жыл бұрын
@@itsnotan8 ahhhhh, gotcha! I was still watching and enjoying the in depth look at what I have to look forward to. Just couldn’t wrap my head around what a v6 GT was lol
@r.j.sdevelopment14583 жыл бұрын
🤧 I replaced my pump n had to rinse my tank out for hours😒🙄
@CoyoteDAworld3 жыл бұрын
Need an twin turbo kit for that bad boi ?
@itsnotan83 жыл бұрын
I wish 😭 I'm highly doubtful I'll ever add a power adder to the 3.8
@codysawyers45863 жыл бұрын
@SECRET GOOFY3.8V have you got a social media ? i’m interested in turboing my v6
@CoyoteDAworld3 жыл бұрын
@@codysawyers4586 this is my only social medial lol but we can figure out something so we can reach out . I'll post an video tomorrow and tag u in it . Just being really busy . But I'll do it tomorrow
@CoyoteDAworld3 жыл бұрын
@@itsnotan8 damn bro lol I just gonna end up camming my v6 and other stuff. Might even slap an single turbo. God knows why I got so many laying around lol
@codysawyers45863 жыл бұрын
@@CoyoteDAworld okay sounds good man haha
@justilianoacevedo50303 жыл бұрын
Yes fuel pump has been contagious with me now my Mustang has fuel pump defect. Your video on how you rebuilt your Mustang gas pump is very educational. I learned how to the way you did it. But I already brought the whole gas pump unit and will be installing it. One thing you left out was your method on how to safely bring down the tank with using adjustable straps. Now that I saw that I will use as well. Thank you for the best video ever 👏👏👏