In LINE FAN REVIEW - Turbo Tube Pro 100

Reviewing another great product that Gil Lec (Extractor Fan World) kindly sent me.
You can buy the Turbo Tube Pro 100 here www.gil-lec.co.uk/turbo-tube-...
Don't forget to follow me on instagram / george_the_. .
How much should I charge per hour? This spreadsheet will help you answer this question. toolbox.mykajabi.com/a/27693/...
Download this FREE book if you want to attract better jobs and customers
toolbox.mykajabi.com/a/7691/Z...
If you don't have a card reader then you should get one now! I use Sum Up and I'm absolutely thrilled with it r.sumup.com/referrals/ksNP_
You can buy some of my awesome tools from Amazon
Bosch Pro 18V SDS drill: amzn.to/3mP28Kn
Bosch Pro 18V Combi Drill Kit: amzn.to/3n1HFSk
Bosch Pro Dust Extraction Head: amzn.to/3mOqKCZ
Bosch Pro 18V Hoover: amzn.to/2JZrM07
Bosch Pro 12V Impact Driver: amzn.to/3qAMMeL
Bosch Pro 18V Grinder: amzn.to/2JZzqYn
NWS Pliers Set: amzn.to/2IpZwne
Wiha Slimfix Screwdriver Kit: amzn.to/3gq4oFu
Velocity Rogue 6.0 Toolbag: amzn.to/2JJRkP4
I am an affiliate partner to a number of products and earn qualifying purchases. As an Amazon Associate, I earn from qualifying purchases.
WARNING:
This video is for entertainment purposes only. If you use the information from this video for your own projects then you assume complete responsibility for the results
#georgethespark #theyoutubespark #extractorfanworld

[@EruElectrics]

*Follow me on Instagram instagram.com/george_the_spark/ Here's another video you may like kzbin.info/www/bejne/hamznqB5gL2SqLs

[@pablo123b]

Wish you actually showed how the wires connect for top speed...I am able to understand better when I actually see where the wires go. Good video though

[@alex1975uk]

So a single wire from the L to the L1/L2 Terminal makes it go full Speed? The 4th terminal has L1 and L2 stamped on it??? Confused!

[@45graham45]

No, he got that wrong. On the diagram he shows it says no L, L1 link is max speed. Put the link in to give min speed.

[@theCALICLIQUE]

Would you wire this to a lighting circuit or sockets?

[@EruElectrics]

As you want it to come on with the bathroom light you should connect it to the lighting circuit. No problem wiring it from the sockets though as long as you are use a fused spur.

[@alex1975uk]

I think you’ve read that diagram wrong. If you loop from L to the L1/2 block it runs on slow speed. Max speed is switch live into LT block and that’s that.

[@EruElectrics]

To be honest with you after all this time I don't remember. When I actually installed it was working on full speed so at the end I did the right way anyway 🤣

[@alex1975uk]

@@EruElectrics hi! I just bought one and wired it in myself and thought I had only wired it up for half speed. Looking at it I’m sure you only loop in the extra terminal for slow speed. Did you use a backdraft shutter also? We could compare notes as I’m in Gillingham!

[@EruElectrics]

@@alex1975uk you could be right. I did whole thing in my kitchen so not the ideal place. As I said, after all of this time I don't even remember what I did and might have got it wrong that very first time as I never saw one like it before and the instructions didn't give much info either. At least when it went to the customer it was working properly.

[@alex1975uk]

@@EruElectrics that’s why I’ve been researching as I wired it in as per diagram but wanted to make sure it was full speed before it gets fitted to the ducting.

[@mdhabibkhan6183]

i will need

[@xXM3tall1c4Xx]

Thanks for the review!! Just ordered one of these. Wanted to see the connections inside prior to install.

[@EruElectrics]

Hello Nathan. You are welcome. At last I'm installing mine this week. I believe some times you can find inexpensive quality products if you look at the right place. For their price tag you get a quite decent fan.

[@xXM3tall1c4Xx]

@@EruElectrics fitted mine today. Oh my it’s loud ?!?! I’m not sure if I’ve got it running or high or low speed. Sounds like a jet engine

[@EruElectrics]

@@xXM3tall1c4Xx that's strange, the one I fitted wasn't and connect it on the high speed. Did you fitted to close to the inside grill? Did you use all 4 screws to mount it, as they can be noisy due to vibration if they don't sit firmly somewhere.

[@xXM3tall1c4Xx]

@@EruElectrics there is about 1 meter of ducting between the interior grill in bathroom and the inlet of the extractor. Yep extractor securely mounted down. It’s not vibrating noise it’s just loud suction noise.

[@EruElectrics]

@@xXM3tall1c4Xx that's strange mate. The one I fitted is not as noisy as you describe. Could it be faulty?