In Pursuit of Antigravity: Research Report I

[@josephdebono6821]

Can't use Digital Scales . When I done this expeiment some years ago I was getting an increase in weight . Then I quickly realized that just by switching the HV tranformer the digital scale changed value due to interference.

[@nycretemason5335]

High end lab scales run differently then basic digital scales.

[@rodneykeith2923]

Bk

[@stick9648]

You total ......

[@xgtwb6473]

My dealer HAS been ripping me off then 😂

[@warrenkeillor9034]

Well done! Keep up the energy vector. It is very encouraging

[@oliivioljy9700]

You are the first person to talk about the stages of development of your methods and the results of their power levels with human clarity. Because everyone else on You Tube is talking completely slurred or constantly skipping important bits of information from methods to eternal sleep, i.e. bit to space. I appreciate the natural approach of your speech, with which you focus on the topic and interpret your results and display your videos. These forces that you describe in order to get them strengthened and even differentiated into bigger ones, our world in humanity will change radically in the next tens of years, because fuels and products of the oil industry will no longer be needed for anything. It would be hundreds of thousands of billions of business flying cars, e.g. I don't think you really understand how important you are in your work methods and as a teacher of the story to us who don't understand much of anything about the subject. Thumbs up for your videos, and I wish the event a rich future for your tests. I look forward to new insights.

[@thomassuit7450]

The ionic wind is composed of air molecules that picked up charge from the wire, not wire material being sputtered into the air. Mount your lifter on its side and put a smoke source downwind from it (e.g. an incense stick ) to get an idea of the volume and velocity of air being moved. This is why it is so critical to also test it in a hard vacuum.

[@cedriceric9730]

Or under oil , the thing is there is really something beyond ionic wind , something does happen to the capacitor , for some reason the us government deliberately refuses to research it further!! They are hiding something

[@rickb06]

ur an air molecule(s) 😉☺️🦃

[@alanx4121]

claus turtur tested his electrostatic rotor in a hard vacuum to rule out ionic wind: it rotates because of a high intensity, non-varying electrostatic field, the intention was tapping vacuum energy.

[@cryptickcryptick2241]

So he just released a new video. Interestingly, he tested it in a vacuum and got more lift. There are a bunch of caveots to ad, one hard vacuums are almost impossible to create. 2. It seems the voltage is more important.

[@arjenchristianhelder1027]

Just a thought, you use a scale that uses a Wheatstone bridge load cell, these give off a very small voltage difference that is then amplified and read by an ADC. the issue here is that high voltage is very likely to have an effect on the scale, since it measures millivolts in order to calculate the weight increase. to use this you should shield the electronics, and cables to the load cell properly to ensure there is a minimal effect on the read out

[@nadahere]

A non-electronic scale should be used as 'shielding' may not be effective. ============= +++😎 Never fear. Milo is here to tell you that, without a doubt, an 'extinction/existential level' [E-level] killer app on the horizon will flip all of the current global scientific principles and everything else underlying it. The resulting 'De Novo Intellectual Revolution' [DeNIR] will give us a fundamental understanding of matter, energy and the universe. Zombie offspring apps,... including printing things on the atomic level and interstellar travel, will be rapidly bred, killing the competition in all business/economic areas such as - electronics, communication, energy, manufacturing, finance, etc., flattening in it's wake crime, poverty, disease, mortality, demographics, politics, injustice and war. Virtually everything will be possible/achievable. To that end, trans-human evolution is at our door steps and everything will change...in the blink of an eye.

[@simonlinser8286]

Or use a spring scale

[@ovidius2000]

orUseABalanceScale...

[@ericchin739]

Absolutely correct lol

[@curtcoller3632]

That is right. You need a wet stone bridge to produce interferometer waves in cyberspace amplified with coegalytic simparticle collectors. LOL Then you use the air from a cosmogeneic vaccum in a capacitor plate made from Ementaler cheese to make anti graffiti.

[@madjimms]

One variable you didn't eliminate is the metal plate on your scale. Its likely interacting with the EM field.

[@cedriceric9730]

Yes , the airforce did an experiment and the effect is very sensitive to surrounding metals ,they did it in vaccum and its a real non trivial effect

[@alasdair4161]

A good test for anti gravity is to repeat the test in a hermetically sealed enclosure and then in a vacuum. If both of these show a net reduction in weight it proves there is a direct gravitational effect, if the results show a dependence on free air reaction it shows it as only a physical thrust force. Great work so far. Cheers.

[@null2470]

It's amazing how many people skip entirely over this simple scheme when investigating reactionless force devices. Including NASA, but they couldn't do the asymmetrical capacitor test correctly either.

[@nomadprospector7093]

Glad to hear revisiting this idea I did this 30 years ago out of a world book and encyclopedia. I too had grand visions of space flight with this technology but did not work in a vacuum chamber FYI do not use an aquarium

[@tonyhill8300]

thats interesting

[@homegrowninnovations5780]

It's possible that the quantum fluctuations that affect the operation of these aircraft can be amplified by adding a heating element between the electrodes. It's worth a try...

[@jimmymorrison8314]

You just got me to understand something I previously had no knowledge of whatsoever. Very interesting and extremely well explained, a sign of someone who completely understands what they are talking about. Thanks, you've really sparked my interest.

[@michelleper5065]

no such force as gravity.... it is all electricity and magnetism... dont delude yourselves

[@michelleper5065]

@@syrious_kash8268 only the truth... and the truth is levelled... at least where you and yours are.... you are in a holographic simulation but it is levelled where you are period end of case

[@michelleper5065]

@@syrious_kash8268 it is your truth....

[@filipdahlberg4420]

@@michelleper5065gravity is a consequence of space-time which causes a force we call gravity…it’s not magnetism or electricity nor density as some fringe people say -.-. Guessing you believe earth is flat too? Also antigravity has been proven recently to not exist. If referring to anti-gravity as just any work done against gravity then…sure why not but it’s not to do with gravity then other than it’s the force pushing you down.

[@glennboyd939]

Maybe a saucer shape is important, so the tubular field doesn't cancel itself, but is bled off downwards.

[@asiseeit...6915]

You are very correct - the dome shape on top does matter. See "Newton's law of universal gravitation" equation. Imagine an Identical Earth of the same mass, directly over you. The distance to that surface overhead being 20 feet. What you would observe (please set aside the total destructive consequences of such a situation) - is total weightlessness between what appears to be two flat planes. (do not try this at home, LOL) Now imagine a smaller sphere 32 feet in diameter overhead, the density and mass values adjusted to create weightlessness. If you use your ACME jetpack to fly about, you will experience some very significant gravity gradients. See where this hypothetical is going? In order to shape the gravity effect of this situation, the sphere above you would need to have a concave indention placed in it which faces the surface of the Earth. Once you navigate your way into concave area, the gravitational gradients will be much more uniform. You may also begin to see that gravity control is the result of the inverted cup shape in the structure that is overhead, and not as a result of any type of gravity shielding below you. The final condition needed to both create this effect and also satisfy Newton's law of universal gravitation is to have the structure above not have a mass of m2, but rather an effective mass of m2. The creation of this "effective' mass is what T T Brown, Becker & Blatt, and Mike McCullough created in the dielectric material used in their capacitors. This effect was only seen while charging the dielectric and before the charge in the dielectric stabilizes. So, to create this effect, place the capacitor over the measuring scale and get the dielectric to have a higher positive than negative charge within it - this is not an easy task to do - but it is how you get gravity control working for you.

[@romin_1122]

Excellently articulated. It was fun to watch and discover this. Thanks!

[@PrintEngineering]

Light a candle in the middle of the scale and watch the air movement in the smoke. Try wire for both electrodes. Try a sheet of aluminum parallel to the scale for the top electrode. Make the top electrode larger (run the original experiment upside down and show the direction of force).

[@anthonywood7420]

As a professional gardener I am clueless, but fascinated. If this can be scaled down without losing lift could it go to exotic layered metals, like people are finding at UFO crash sites?

[@44davewright]

So did you run it in a vacuum chamber? This would answer force vs particle movement pretty quick. Always wanted to try to build a lifter but time seems to be my limitation. Going back to watch part 2 now

[@michaelclueless]

Looks pretty clear that it has more to do with the EM field lines of force, than the physical arrangement of the components. I wonder what would happen if you used a pulse frequency with a resonant wavelength to the distance between the components, in essence using the array as an antenna. Perhaps a resonant cavity could be used. Wasn’t this effect first observed over a century ago in x-ray vacuum tubes?

[@qkitselectronics5415]

Well done, very clear, excellent audio and facts, the "anti gravity" research really is counter intuitive, which is what allows it to stay hidden right before our eyes. Have a great day, everyone. Most stuff operates on the opposite principles that we see it operating in and is what makes this video great, I bet you make this work.

[@curtcoller3632]

Oh - so it is not working yet??? I bet against you - he won't make it work. Oh - please change your screen name - just one letter: Make it "quitelectronics".

[@thomasinlondon2849]

You’re bang on the money and so is the video creator. These vids vanish. All of them from early 2000 can’t be found. I hope this gentlemen will be fine.

[@tweak447]

I love it when I hear the words counter intuitive used to describe this story and other science fringe ones like it. It usually means I'm in for a cool ride. Unless they get silenced. The implications of this work could lead to more than just antigravity. There's potential free or greatly reduced cost energy here, possibly just around the corner with the collaboration of independent scientist out there Here's hoping they and all those like them can stay independent, as open possible like this guy and unmolested by any government or the corporations that control them. The possibilities are endless. Yeah, I'm getting Gadsden Flag nerd chills.

[@PerpetualMan22]

Try accelerating out of balance gyroscope in various acceleration, having greatest acceleration when the heavy weight it arcing toward the sky.

[@qkitselectronics5415]

Interesting I have seen how its charge is attracted to the universe , the opposite of earth? I could have that backwards. Thanks have a great day!@@PerpetualMan22

[@Believer2006]

I am reading all I can about Grebenikov’s work and am working on building a hoverboard. What is interesting about his flying board is that it produces an effect that makes the board and the rider invisible on and off.

[@robertmorgan9112]

Godspeed with the hoverboard! As I would want one, but for the fact that they can’t even get balsa wood, wires and tinfoil to fly without a massive energy supply Etc. All the best. I hope you crack the challenges!

[@michaelclueless]

People who don’t understand electricity, shouldn’t mess with time or gravity. If you survive and aren’t thrown into another world, let us know how that works out!

[@edwilson7187]

They used compressed mercury long ago and from what I heard they use mercury compressed with a particle stream on the tr3-b craft. They also alter the higgs boson field to stop the effect of inertia so you don't turn in to butter when the craft accelerates. Other craft use unimpentium (element 115) and bombard it with a particle stream to release an anti-gravity field and pass the anti-grav particles thru wave guides to 3 emitters on the bottom of the craft. That's a little more complicated than something the average person can experiment so just a thought.

[@vusiliyK]

No to mention that no one on earth has access to a stable isotope of element 115, and if they do, it didn't come from this planet.

[@edwilson7187]

@@vusiliyK Didn't say it came from earth. If you haven't, check out Bob Lazar. He supposedly "borrowed" a chunk of it from the time he was doing research at S-4. They tried to make it look like he never worked for the Gov but has papers published from the time he was employed by them.

[@THEMADPROFdj]

Bob Lazar has some. LOL!

[@edwilson7187]

@@THEMADPROFdj He has been under constant scrutiny by the Gov so he has something they want. Who is to say. There are different density parts of the universe where it might be a common element where in this neck of the woods it has to be manufactured.

[@duncanphelps2103]

​@@edwilson7187 The nice thing about gravity as opposed to the reciprocal gas engine it that there are many ways to skin-that-cat. One does not have to go with off-planet 115 nor scarce mercury like the Germans of WW II era. As I allude to above: shape, ratio, layering, charge & resonance can do wonders when decoupling from our 'ground'ing on Earth!

[@CoreyChambersLA]

Navy and Air Force work closely together, share some of the same equipment, live and work at many of the same military bases together.

[@IronB2]

Yet can be worlds apart at the tips of the research spear.

[@hyiping5926]

This was so interesting, i really enjoyed your video, good job!

[@Incorruptus1]

I like it that you do strafe for releasing your knowledge, not sitting on it. Which is true science. Thank you for that. Keep it up! :)

[@eoggblaine9725]

What is not being considered is the pulse? When pulse is introduced, and done so utilizing the multiplication of added values, by allowing millisecond bursts what happens?

[@alwayslearning8365]

Every failure is just a stepping stone to success. Great video good luck with your experiments. 👍👍

[@mrchapin94]

You should get a frequency recorder to see what frequency that's humming at or hissing at.

[@AlexCausey]

To much banter, I can't stay!

[@c6jones720]

Ive been looking at multi-axis control systems for lifters. I'm looking at multiaxis control on TT Brown saucers now. For lifters, I found you may get more thrust by going wider than taller.

[@TechValleyScienceCentre]

Interesting - obviously I haven't made it as far as multi-axis control yet. And I also haven't made it as far as maximizing thrust by width / height ratio but I have been assuming your findings. Thanks for sharing.

[@c6jones720]

@@TechValleyScienceCentre This is my go to combination for lifter control: Run it at no more than 9v DC. You can PWM it at 50Hz or 60Hz too. It will allow you to lift a 3->6gram model with total length 50cm or so. (corona skirt separation distance about 7cm). Multiplier: www.ebay.co.uk/itm/264811830505?hash=item3da803dce9:g:SfYAAOSwCHVgO~-Q High voltage step up: www.ebay.co.uk/itm/402827554914?hash=item5dca64b062:g:l18AAOSwtNFbAj4W (The step up needs to be oil cooled)

[@c6jones720]

@@jimmiedean8035 any documentation or video on your experiments to share?

[@TechValleyScienceCentre]

@@c6jones720 9 Volts??? That's it????

[@c6jones720]

@@TechValleyScienceCentre for the circuit combination I shared its 9v (it gets stepped up to maybe 60kv or so). No more than 9v input, or the transformer will blow. You can lift easily about 3grams of lifter with that.

[@distantsight]

Is Report 2 available?

[@joeldichter1320]

Bro, the fbi and cia got him 😂

[@dirrtbikekid7]

@@joeldichter1320 on god my exact thoughts 🤣pt 2 must have had some good info

[@direprogeny7720]

Great video! Thanks for doing the hard work and research, and SHARING it!

[@jamesmartinho9100]

Antigravity is ACTUALLY CALLED ZERO-POINT ENERGY.

[@JustHear4DaPopkorn]

I do believe I have found a new channel to binge watch. I am researching electro-magnetism and what I like to call "Negative Gravitational High-Voltage Positive Thrust Producing Fields of Uni-Directional Force". But personally, that's just what I LIKE to call it!!!

[@dandrechesterfield5411]

Have you studied Viktor Grebennikov's study of beetle wings? It's interesting and involves shapes and symmetry that for some reason create a magnetic field just by the arrangement of the microscopic shapes (cones) on the wings

[@steveugly1]

I've heard about that. Sounds very interesting.

[@galactikbutterfly]

I was gonna mention him. I think the configuration is a key factor example hex- behive which can be stacked also tubes and perhaps cones as cones gather energy to the point. Also ,tyour configuration reminds me of a box kite I wonder if what keeps a box kite aloft is not nessisarily the wind but its shape

[@julianames311]

I wish there was more information about this topic. Have you found a good source for further detail? It did a few hours search a few years ago and only can find a little bit information

[@rodbihari8799]

I googled viktor. He was a fraud and so is this guy. Science and paranormal are unrelated. One is delusion the other is real. Dont get them mixed up.

[@THEMADPROFdj]

@@galactikbutterfly I was wondering that myself. This thread has a good compilation of thinkers!

[@patrickjreid]

I love the bow tie, t-shirt, lab coat, and mad scientist hair look.

[@chronobot2001]

Since the force is always in the same direction regardless of the polarity applied, it would seem that gravitational force rather than ionic wind is responsible for the lift. The nearest thing I can compare it to is buoyancy. The mass of the object can remain the same, but if the area it occupies is greater than the relative density of everything else around it, you get a buoyant force upward. This is why a 100 lb log floats and a 100 block of steel sinks in water.

[@TheTrumanZoo]

I have a few ideas and would like to start experimenting with this. I don’t really know yet how to generate high voltages. I don’t know what equipment to get. I think we need a bifilar Tesla coil and a foil plated cup, and create a cycle upward. Tesla coil center up, then high voltage over the cup shape downward, with the aluminium negative ring placed down below the cup.

[@TheTrumanZoo]

Maybe you can repeat the foil and exited wire on the same balsams wood shape. Maybe more layers or maybe n height, repeat the working system. Wire foil wire foil wire foil? And maybe use less foil? Or place the foil perpendicular to the wire below it maybe.

[@coreybrenner9503]

@@TheTrumanZoo Consider stacking foiled styrofoam cups, arranged with electrode wires in layers.

[@coreybrenner9503]

That might effect a shaped thruster.

[@THEMADPROFdj]

This is one of the best practical sources of very high frequency high voltage energy. I've been powering this device, disassembled, with a 9V 100mA power supply for several years without issue ( other than levitating objects, powering LEDs remotely, and scrambling televisions a few neighbors over)! Avoid dangerous transformers, they are not needed for this experimentation.

[@theultimatereductionist7592]

How will this make use of General Relativity? Won't antigravity devices required the massive combined tools of all our deepest theories, mathematical calculations, scientific discoveries about particles, interactions (aka forces) and the massive forces of experimentalists, mathematicians, computer programmers? I strongly believe all this work you are doing is an absolutely essential critical necessary first step, that we have to build on.

[@slickwillie3376]

GR is backward. Best to just forget it. It's propaganda to cover up the truth.

[@slickwillie3376]

GR is backward. Best to just forget it. It's propaganda to cover up the truth.

[@josepetersen7112]

Ah, the problem with electrogravitics, that being TT Browns term for the field, is that it pokes some holes in general relativity. Brown, before he and his work were swallowed by the black hole of arms development, was promoting some pretty radical notions regarding physics.

[@jumpinjaxs]

G.r at the end of the day is best guess. Of it was complete anti gravity would be easy

[@AutitsicDysexlia]

All they need is to figure out is what field can energize, shape, and interact with the "vacuum" that coalesces and permeates all matter. This would allow anything within that charged field to pass through material space without any interference. That's all I'm going to say about that. 🗣🌌

[@THEMADPROFdj]

I have tried such experiments using the high voltage output of a battery powered Orec refrigerator ionizer rewired to accept a 9V 100 mA DC power supply (this unit is loads of fun to do HV experiments with. It is super durable, even at over double the input current left on for days). This particular unit outputs very little amperage and only spits out between 2kV-6kV, depending on input current. Where this device shines is in it FREQUENCY modulation of the output energy. It has to be in the Mhz range, as televisions several rooms away will receive its broadcast as a set of horizontal static lines across the screen. It is also capable of remotely powering LEDs from a notable distance (over 10'), and causes laptop's touch pads and other i/o to glitch at a similar distance. In my "anti-gravity" research I have deployed various power supplies, from MOTs to arc welder outputs. The most profound effects in regard to ionic perturbation of mass to field seems to lay mostly in finding the right frequency(very high) to mach the mass/geometry of the "lifter", and not so much the voltage, and much lessor the amperage. When you hook this unit up to two or more conducting surfaces/objects, they fall in love with each other, i.e. their attraction to their opposite charge is so great that they behave as if there is a consciousness guiding their actions to manipulate matter in creating a path to unification. I understand the ridiculousness of such a statement on a scientific level. But if love is nothing more than the attractive force between material and non-material things in nature, it certainly trickles down to, and can be observed in experiments such as these when high voltage is coupled with very high frequency. This effect has recently been shown in experiments called "Self Assembling Wires".... kzbin.info/www/bejne/qHzFgImhi6hka7s Searching for that link I just stumbled upon a new term that is now being used to describe the effect I've been toying with; "Teslaphoresis". Sucks that I'm doing these experiments in my basement and not at a university or tech job

[@VirtualHolocaust]

hold on that doesnt make sense. Cause isnt it the DoD that finances research and development? The airforce doesnt have r&d different than the navy right?

[@VirtualHolocaust]

Wait yeah. I just thought about that and wouldnt it be Darpa? Im almost 100% sure that research is done on the DoD level and then its cascaded depending on the needs or the function of each branch. Not to mention there is overlap.

[@andrespereydaresearch]

A capacitor is two conductors separated by a dielectric material. Use a dielectric material with a higher k factor, instead of just air?

[@josiehinton4351]

His hair and bowtie are spot on for the title. Really though, the "ion lifters" have been studied in depth. It's not movement of metal atoms. So not copper atom movement. It is the very small current of electrons moving without causing breakdown. This what is sometimes called "stray voltage" creates a reactionary force as the gas "atmosphere" is affected by the small electron current. There are large numbers of studies done in application of such on aircraft wings. The ion gas flow caused by the asymmetric capacitor system greatly reduces vorticies and smooths out the boundary layer a Ross the wings. Other studies have shown how controlled electrical surfaces can change the overall vector of air across he wing surface.

[@chronobot2001]

Doesn't the fact that changing polarities does not change the direction or magnitude of the resulting force argue against an exclusive ionic wind force? Maybe I misunderstood what he said about the results he got when he reversed polarity. If I have a misconception about his results, I would appreciate clarification.

[@josiehinton4351]

@@chronobot2001 it seems the effect is directly created by the non symmetric capacitor setup. It doesn't matter which side is charged pos or neg. The greatest effect also occurs when voltage differential is as high as possible before breakdown occurs. Studies in aircraft even date back to the 1960s. The US once published a few studies that demonstrated the disruption of the air around the plane itself could mostly muffle the sonic boom if the field was spread around the plane. There are the primary ideas of greatly reduced drag by smoothing the flow of the air boundary layers. Also studies that 8ndicate a significant obscurication of an aircraft to normal old fashioned radar designs. The field would help to direct the radio freq around the plane and reduced refection overall. Of course several universities have shown that modifying radar can track such a target as they developed a method that radar could track releases of ionizing radiation in order to better track releases from disasters like Fukushima. Multiple other experiments have shown that the Bifeld-Brown effect looses all force as the atmosphere is sucked away from the capacitor. This proves gas reaction is the primary force. Ion thrusters for spacecraft will require carrying a small amount of bottled gas in order to be useful in space. However in space you only need to use such thrusters in short bursts to gain direction and velocity control. This makes them far less heavy than conventional oxidizing chemical thrusters in space.

[@horacejrogers4714]

I think you are just making an electro static fan (Dyson sells them). You need to put some threads around the experiment to see the air flow.

[@abaseenstrength1263]

Just to correct you at timer 10:40 0.6 grams is actually 7dividied by 0.6=11.66. It means the force generated downward is 1/11.66 times the mass of the panel not 1/8th mass of the panel.

[@billyhamilton3669]

Years ago I came across these lifters and thought this was some sort of anti gravity physics at first but I was completely wrong it's actually ion propulsion. The electricity propels ions in the air in a direction when set up correctly. If this experiment is done in a vacume with no air it dosn't have enough ions to work. It is still very interesting and most famously NASA is experimenting with ion propulsion system/engines

[@SmokeyWire56]

A few things about the high voltage power supply your using. They advertise an input voltage as high as 9volts that will burn them out though. Lithium 3.6 volts is best they will last forever then i have burnt them out at 4.20 volts. And the frequency is more like 15,000 hertz ac slightly rectified to dc when not a spark gap. Also they make tons RF that could mess with the electronics of the scale and run more around 25,000 volts in there safe continuous operation mode they can be pushed past that briefly.

[@JoinGamesLinks]

Raidiometer video conversation : Using mirrors to amplify light would help Results ! Shaft would have to Drive Gears From speed Shaft turns to Ratios Building Tork ! Weakest Spin Shaft Motor ? Tiny Dynamo Shaft , large Clear Sphere Domed Vacuum Bowl ! Directing Multiple Mirrors Multiplies Photons + Multiples Spin of Shaft + Gears + Dynamo ! Make tiny @ Micro Scale ? Would have force of Spin , how small can it be ? Photon Driven Micro motive ? Micro Gyroscopic unit , Powered by light ! ??? Ideas , in question form . What about if you had 2 on same craft ? Mounted on v to frame ? 3 on Y or ∆ Mounted to frame ? My thinking here is , Spin front bicycle tire , when sitting on Office chair . Spin tire , holding Shaft stable . Tilting left or right Spins Chair on swivel , pivot . Creating Rotation with Single Spinning Tire/Disk . Centrifugal Forces multipled by 2 Counter Rotation Stabilize "Twist on Pivot", Rather Shift + Tip ! I am thinking 3 on Y or ∆ will Push + Pull . Gyroscopic Centrifugal Powers Balance Stable . May need Coriolis Effects in Atmosphere . ,Vents Direct Ion Winds ! other Experiments , using Combind could leverage progress !

[@zynark777]

Unkempt Crazy Scientist Moment. Keep on keeping on. You are on the right path.

[@argmentum22]

would really like to see a follow up video for this.. you may also want to take into account the width of the x axis of the foil plate hasn't changed at all however much you cut off. maybe you could try with the plate as a ring and change the width of the ring? (or other straight edged shape. octogon etc..)

[@darthpaul4432]

I made one of these lifters about 20 years ago. I also used enamelled wire about 30mm from the aluminium foil skirt. I used a flyback power supply from a computer monitor as the voltage source. When i first tried it, it stuck fast to the wooden floor i tried it on. When i moved to a concrete floor it flew in the direction of the enamelled wire at the top.

[@tonymc-dx8xw]

Two sepreate approches to the same question is a good check on how it really will work.

[@baraBober]

Please make a video about the GEET! I'm very curious! Also, were you able to successfully patent anything?

[@bobwatkins1760]

Nicely done. I have seen things like sonic transducers used as an "anti gravity" device. Supposedly the more transducers the higher the weight lifted though I fail to recall the frequency used and or voltage needed to produce lift.

[@tweak447]

If it's the same one I'm thinking of, it was something like 4.7 hertz - really low but based on some research and experiments by a Russian entomologist of all people, while observing a known but rare species of beetles. He noticed that they seemed to fly despite wings that are too short ant the frequency of flaps too low to support their body weight, much less fly at the speeds he observed or hover for the extremely long periods they did. It defied all conventional aerodynamic bug science. These beetles had some kind of bizarre wing construction as well, seemingly impossible in random nature in layers not seen elsewhere. This guy is alleged to have constructed a platform from their wings that he could ride and control. The stories just get crazier from there.

[@davidsekora5183]

When you were reducing the size of the smaller electrode, my immediate expectation was why not convert the larger electrode into a patabolic dish (& not a tube?)

[@twistedbydsign99]

How does thrust vary with atmospheric pressure? That would key into ionic wind I believe.

[@kevindooley9744]

Dear Doc . I was fascinated by your experiments and I believe what needs to be considered is the momentum imparted to the larger electrode in your case. The greater the distance between the small electrode and the larger electrode. Since some of the momentum imparted to the ions when emitted will be absorbed partially by the surrounding air and it’s scattering effect on ions and secondary ions, which will both change the direction of arrival of the received ions and potentially reduce the momentum somewhat because of the increase in local air molecules velocity. In combination this will reduce the opposite or cancelling momentum that must also be present and needs to be accounted for in the net force predictions. Just a thought.

[@KeizerSinbad]

You could test if it’s ionic wind by putting it into a vacuum chamber.

[@algharibe]

T.T.brown immersed the apparatus in the oil , and the device still getting the thrust , this give us an idea that there is no ionic wind her , another things that the lifter still genreating thrust in vacuum chamber

[@ztyy8185]

Still vacuum would prove that no partickes of propellant are thown out, and therefore any thust bust be some more mysterious fenomenon. Oil itself could be ionised somehow, and thrusted out. Therefore vacuum expereiment should be neccesary.

[@gordonstroup882]

Hence, President Trump said we now have another military service, "The United States Space Force" I believe that we have some AWESOME space crafts! I live in northern Arizona and I see some cool stuff at night up here!

[@robdoggerful]

I once asked my grandfather if I had an open air capacitor with sensitive scales supporting each cathode and anode would one side gain weight as charged ????

[@BeneficenceTV]

John Searl who coined the anti-gravitic phenomenon "The Searl Effect" also uses asymmetric capacitors in his designs.

[@johnhause7150]

Super cool the positive exciter wire with nitrogen..

[@JL-go3]

Can anyone explain what gravity actually is ? Not the measurement of its affect on mass but what it is. A particle , wave or maybe quantum in nature ? To discover the anti to an unknown force is amazing. Is the affect of gravity being interpreted as gravity itself ? Also are the principles of aerodynamics , buoyancy and other interactions of forces being misworded and misunderstood to be anti gravity?

[@nicoledotson8946]

its only confusing because the deny the aether. watch a video titled... Gravity explained in 10 minutes as well as unified field theory from the channel... The Awesome Life Force. I would put a link but seems they don't like that.

[@123_bob]

Add additional wire, along with your additional panel size. Try different gauges of wire with larger panel size. Try setting new panel at same height above scale as original panel. Ideas to further flesh out your experiment. Double the power to check for unusual results with new rig setups.

[@ripleyleuzarder630]

w/resp to the hovering kite shapes... what happens when you place a piece of cardboard between the table stand and the floating assembly?

[@TalonsKrafts]

An awesome video documenting your findings. Your experiments focus on high voltage from a taser power supply. Those are low amperage. What happens when you increase the amperage with the same voltage? That would be an interesting experiment to see your results.

[@THEMADPROFdj]

I have tried such experiments using the high voltage output of a battery powered Orec refrigerator ionizer rewired to accept a 9V 100 mA DC power supply (this unit is loads of fun to do HV experiments with and is super durable, even at over double the input current left on for days). This particular unit outputs very little amperage and only spits out between 2kV-6kV, depending on input current. Where this device shines is in it FREQUENCY modulation of the output energy. It has to be in the Mhz range, as televisions several rooms away will receive its broadcast as a set of horizontal static lines across the screen. It is also capable of remotely powering LEDs from a notable distance (over 10'), and causes laptop's touch pads and other i/o to glitch at a similar distance. In my "anti-gravity" research I have deployed various power supplies, from MOTs to arc welder outputs. The most profound effects in regard to ionic perturbation of mass to field seems to lay mostly in finding the right frequency(very high) to mach the mass/geometry of the "lifter", and not so much the voltage, and much lessor the amperage. When you hook this unit up to two or more conducting surfaces/objects, they fall in love with each other, i.e. their attraction to their opposite charge is so great that they behave as if there is a consciousness guiding their actions to manipulate matter in creating a path to unification. I understand the ridiculousness of such a statement on a scientific level. But if love is nothing more than the attractive force between material and non-material things in nature, it certainly trickles down to, and can be observed in experiments such as these when high voltage is coupled with very high frequency. This effect has recently been shown in experiments called "Self Assembling Wires".... kzbin.info/www/bejne/qHzFgImhi6hka7s Searching for that link I just stumbled upon a new term that is now being used to describe the effect I've been toying with; "Teslaphoresis". Sucks that I'm doing these experiments in my basement and not at a university or tech job.

[@duncanphelps2103]

​@@THEMADPROFdj Keep it up & remember this path you are going in is only one of many avenues of decoupling/ungrounding from Earth. Spell that: Utilizing your own gravitational directive/self-encapsulated ungrounded yet-resonating functional direction.

[@darrenbell2220]

Question. Does liquid nitrogen conduct electricity? If not, try emersing you capacitor in liquid nitrogen to see if it increases thrust. Try using a super capacitor using graphene for your vertices. Then try emesingvthat in liquid nitrogen. Also, try using these new Ceramic super conductors as the verticals to see if thrust is increased. Also, if graphene helped, try it in combination with the super conductors.

[@bringtheideas460]

So the excitor wire produces the force. Make excitor have large surface and see what happens?

[@michaelhumphrey2858]

Updates?

[@distantsight]

Great video. Can the lifter ever lift the power supply?

[@johannygren719]

There is at least one I’ve seen that can. Check out this channel, he has a patent for the design too, kzbin.info/www/bejne/a2GvdJaXoNetmJo

[@howtocreateresilience7009]

This lifter can lift its own power supply, kzbin.info/www/bejne/oaDHgKRvh7iGkLM.

[@dandahermitseals5582]

Very intriguing.😮

[@haxslasher1]

Put this in a closed system and measure its mass through time. That'd definitively rule out ionic thrust as the cause. If the closed system does have some sort of internal forces generated without thrust that'd be pretty big news.

[@cornwallav8r]

Have you ruled out the high voltage affecting the scale electronics itself?

[@austinbambooinc2507]

Oh good, you did have a T. Townsend Brown reference. He used the term electro-gravitics to describe the phenomenon because increasing the density of the electrolyte would increase the force. Ionic wind with atmospheric gases would be stronger with a negative emitter and a positive collector. T. Brown found with DC the device would move to the positive plate, and free suspended balls would have the negative ball to move to the positive. He later found with dissimilar sizes, it would move in the direction of the larger plate, even with high frequency alternating voltage.

[@brian-jamesostling5786]

What about concentric rings for the collector . Skin effect . The current flow. Possible perforated small plate for greater differential.

[@msmith1509]

The US military's ARV Flux Liner as drawn by Mark McCandlish shows the propulsion unit as a large circular curved capacitor the diameter of the craft with multiple copper layers embedded in epoxy and each layer is sectioned so that each section causes a force deflection in a particular quadrant. Each section is tied to the joy stick like control that the pilot uses to steer the craft. The high voltage for propulsion was generated by counter rotating cylinders inside one another filled with a fluid (purple I recall) and sit in the middle of the craft with the pilot's back against them. You may be able to find this drawing on the Internet but has been taken down for the larger one. See if you can find the documentary done about Mark and his friend who saw these craft operating at a private air show. It is old school technology by now to the military. Unfortunately I believe Mark was murdered when they took remote control of his car and smashed it into a cement wall in a parking garage. So why reinvent the wheel? Start with what this information.

[@gilessmedley619]

Sounds like the Nazi Bell or was that a thorium centrifuge or fiction?

[@ovidius2000]

highVoltageAndNoMagnetism?

[@ThomasLee123]

WOW. I did not know that about Mark. He was a very intelligent and friendly guy.

[@brianmatthews232]

Notice the arcing on the scales base plate at time 25:53

[@yepwhocares3541]

So if we put one magnetic plate on the bottom of a board, and used the earths core as the other, then matched the polarity, would we in theory achieve lift?

[@Jagdtyger2A]

How well does this "thruster/liter" work in a vacuum chamber??

[@PerpetualMan22]

I think it takes two. Picture a balance disk with axis of rotation not in the center of the disk. Then have exact timed acceleration and deceleration that is periodic with the rotation of the disk. the heavy weight will draw the axis of rotation towards the direction normal to the arc (outwards) at greatest acceleration.

[@rudhisundar]

Can you make an classic UFO saucer shape and try it out ? Does it produce significant lift ?

[@danielash1704]

The Geeta engine is a Noble gas magnet cylinder that forces the cylinder to centralized densities that is a expansion of charged state's and a vacuum in a relaxed state of the chamber and a charge released by the same place. A minute drawing in which the expansion does a field of gravity and densities changed to a multiple level of voltages like a lightning strike in a butterfly arrays circles with in circles with in circles of attraction and creating a unique field of waves in a domain of densities

[@zanderwhitcroft]

Had a thought, would Graphene be another thing to use instead of aluminum?

[@quantumbitz3473]

Your work is parallel to Topological superconducting and condensers. It's a matter of pattern. My question is it the tunneling of skirmions and fermions Cooper pairs that would provide the interface to have a skinned craft acting as one electron perhaps?

[@StillWatchinconspiracies]

I wonder thou can you up scale the ionic lifter like size and if it would work 🤔🤔🤔

[@Suge212]

What does an ionic lifter have to do with anti gravity?

[@theultimatereductionist7592]

1:21 Toyota RAV4 Prime 3:30 Nissan Leaf 5:13 Kia Nero 6:37 Ford Mustang Mach-E 8:39 Hyundai Kona 11:47 Polestar 2 16:04 VW ID4 Pro 17:47 Hyundai Ioniq 5 19:53 Kia EV6 Wind RWD The only good electric vehicles. The only ones worth mentioning Source: kzbin.info/www/bejne/gZbFmICXhdqFg9k Andy Slye channel

[@voncth5791]

20 min mark, with larger plates, could it not be that the weight added by the foil was responsible?

[@GaryMcKinnonUFO]

You can't use electronic scales in these experiments, there is too much field interference, unless you use a Faraday cage or enough distance between the DUT and the scale.

[@nyki7fykxtjxyi]

I would like a lifter cell configuration built like an intel chip with massive lift

[@dentonfender6492]

What if you used a stack of lifter plates, but the bottom plate was smaller than the one above it, in essence, you would have an upside down pyramid shaped lifter device?

[@PigeonLaughter01]

What a great video! Thank you for sharing your results with us! So hard to find actual modern experience on this topic.

[@Naomi_Boyd]

What is the thrust limit on ionic wind? And, if the lift force is 5x the thrust limit of ionic wind, why don't these things work in a vacuum?

[@mrhassell]

Viktor Stepanovich Grebennikov mastered this in the 80's. He calls it the CSE or "Cavernous Structures Effect". Otherwise, the "Quantum Vacuum Effect". It's actually a dimensional effect, more than being Electromagnetic, although it is often misperceived as being entirely Electromagnetic phenomenon. The Biefeld-Brown effect is an electrical phenomenon, producing ionic momentum by transfer of ANIONS or negative ion particles.

[@billwoehl3051]

What is this force pulling against? The natural flow of the world system (aether) and the gaussian surface above, being +, and the earth -, measurable at 100V per meter of height off the ground. You have a mini capacitor inside of a humongous gigantic capacitor. My second thought, is, since you're already inside a gigantic capacitor, is it possible to just take the + side off, putting a completely - charge only to the craft? Or maybe the different amount of charge between the two electrodes be specific to achieve a stable hover at a specified height?

[@PatCartier77]

I would try spinning magnets facing counterclockwise and play with that smaller ratio thing

[@danielpayne8943]

Yo, wish I had seen this sooner. This is the first of your vids I have seen and suppose I should have viewed all your work before I choose to speak, but I was so excited from this I just couldnt help myself so apologies if Im ignorant here. I started my lifter experiments shortly after Oct 19th 2018 after my neighbor, my girlfriend and I were having a fire in my back yard waiting for a meteor shower to appear. What wound up happening was an appearance alright but not of meteors, in their stead was 2 triangles in a formation with round lightsaber blue/white glow at each point, silent, and extremely fast. Almost the most incredible thing ive ever seen and ill be 49 in 4 days. After this I knew something more was possible and began to see how to go about replicating how to do it. I think by Dec I made my first model and the first go of it was a smashing "failure", but the fact that it moved at all meant to me that I was close. What it did was lift up, turn over and then quickly smash into the ground. Now I see you have yours on vertical rails. Later on I tried fishing line floor to ceiling with fishing weights where I wanted it to stop, and ran the line on the model through the thinner style of coffee straws. It worked of course but there was too much drag. However if one starts there they will never experience the "failure" I did. One might think great, who wants a failure and it wasnt till much later and many models of different shapes and sizes that I looked back on the all of it and found myself focusing on my "failure". Now every one of my models have worked, 1 inparticular worked very well that was the 3ft octagon. Even my "failure" worked 5 min later after i fixed a post and adjusted my anchors, which brings me closer to what this is all about, what Ive never heard or read anything about, presumably to maintain the integrity of the illusion. Now what I remember of the failure was that it lifted, flipped and then SMASHED into the ground, not that it lifted, flipped, and merely fell to the ground, NO. In hindsight it propelled itself into the ground. I dont exactly know what that means but I remember that and to keep it a float, I had to shorten one of 3 string anchors. The thing doesnt want to fly it wants to smash through the ground and preventing this from happening has a default effect of flying. As if it lifts itself high enough to flip and if it cant it just keeps on going up to try and flip again. I didnt encounter the mysterious sounds until later on when I made a round one with no aluminum skirt. Instead I cut the sort of asterisk symbol out of the bottom of a pie tin. To my surprise it worked too but now there was sound , as if it were upset it was being made to perform in this fashion. It was certainly my loudest. I never lengthened the skirt as I was always trying to go for bigger and trim down weight. The way I saw it, if this canned explanation of the mechanics of this Biefeld/Brown effect was this ion wind and flow or inertia of current from sharp to smooth , well then size should matter not. Allegedly for my power supply built by the late genius Bob Lanning of amazing1.com or information unlimited I was only supposed to be able to lift/aka keep from flipping a model of 3 12inch lengths. Well my largest took up an entire folding table if you were to draw an elongated diamond on one maxed out from end to end, side to side, so the only portions not the size of the table consisted of the small triangles of the corners of the table. Not sure if I could have went bigger. Never attempted it cuz that size seems to be the max of the strain that the balsa frame could endure. Wish i could 3D print 12 inch frame pieces out of graphene and have one end be a ball and the other a socket. That way it wouldnt take all day to assemble more geometric models and also trim weight and most likely increase structural integrity...so I can see the real limits of my power supply. I went back to Bob to purchase the 100kv supply but to my disappointment the site and he were no more, and now so were the many other high voltage experiments that need to be done. Most importantly emp guns for the damn swarms of drones that would make short work of us all without this level of preparation. Later on I noticed that light is also emmited although very subtle. Kinda like the glow from the coil in one of those clicky torch lighters. Ive been shocked many many times, once on film. I rewatch it time to time for a good laugh but still perplexed as to how it occurred. Ive only experienced this mystery zap twice and the second was much stronger than the first. Had a few models light on fire. Pretty sure this happens either if humidity is too high or the storage surface gets sticky or the model just somehow gets stuck to the surface of which it is upon and the experimentor doesnt realize it, or maybe even cobwebs could have been to blame, perhaps them all. Also noticed ac has an effect. Ive only ever used nickle plated stainless steel wire for the corona wire. A guage so thin/sharp that it can be inserted into the eye of a needle. I then keep it attached to the reele and proceed to sew it through the hoops and do a loop as if the first part of tying ones shoes. This avoids many revolutios around post yet maintains taughtness. The UN taught was what I origionally blamed for the mysterious sound but never was completely convinced on the or the Ion wind explanation. My thoughts are indeed there is some wind made, but certainly not enough to lift a model. If one was to make the largest circle he could with his arms toching the fingers of each hand together as if to hug someone that had cooties, my extremely stable and fast jumping mini skirt (1/2inch) octagon could go fit around the cootie hugger. Id say the wind generated is no more if not even close to the gale one could produce at the peak of his own lungs and kiss focused lips. In other words if any model was placed upon a very big and strong fan pointed upwards set to the same inertia of wind from the model and then turned it on , it wouldnt even come close to lifting, at best flutter the skirta bit. It would probably require 8x the force to get it to become airborne. Ive actually just wrapped the foil around the skirt, barely enough to make the ends of the wrap around meet. That model was a diamond as well and after it no more diamonds as its the worst shape for a model. That one actually broke while lifted and just sota hung there in the air all stupid and arching on one end and the other trying to get back on the ground. Another interesting vid as I concluded the ends of model curled due to taughness of corona wire thus expanding the dielectric zone greater than 30mm and therefore no BB effect. Never was completely sold on that theory either even though another of my own. Alright, well suppose Ill go view some more of your stuff, any questions or wanna laugh at drunk guy getting shocked by his experiment, feel free to hit me up. 🍻 to science

[@matteorossi5128]

What about increasing the capacitance by placing an isolate between the two electrodes? Two armors with a dielectric have a specific charge on both plates, but if you move the dielectric in two different armors, you will have the same charge in the two new plates; probably the key is in the dielectric in your case, is air only and the distance between the electrodes.

[@someadvids5655]

Hi, a little upday but could any of Viktor Grebenennikov knowlage or experiments help in this field? you know, try and connect the 2 together some how? take care

[@beginnereasy]

I was already going to correct your use of anti-gravity while the video was loading 😂

[@thomassuit7450]

Umm...doesn't current flow from negative to positive? So if you connect your negative lead to the panel, and positive lead to the wire, then it should blow air upwards thus pushing the lifter down into your scale.

[@vincenzopanella2705]

Hello, I just found out your channell, I did an experiment some time ago , and I 'd like to share my findings with you. I started from the concept of a mass bending light , a huge gravitational mass, bends light , so we can see the 'dawn' of a planet earlier than it will happen physcally, this is a well known effect in astrophysics. So I had thought, if I will be able to create enough light confined in a small space I should see some effects , correct ? So I grabbed a rahter powerfull laser >1 W , and I created an 'enclosure' with alluminium foil with a 'tunnel', think about it as an 'ocarina' but with no holes. I shot the laser inisde the cavity throuhg the tunnel , the laser light bounced against the internal walls over and over again, so basically photons were entrapped inside. The laser was operating for all the time during this experiment, then i dropped a small piece of plastic and I noticed that it fell in 'slow motion' it was barely percetipble, but nontheless visible. You can replicate this experiment with a rather low budget

[@vancemacd6315]

I heard red Mercury is an exotic element necessary for antigravity. Not sure if it was fuel or lubricant or the actual propulsion or way to reverse gravity.

[@BlorkTDork]

Thank you so much you have solved a mystery in my shed every time I would weld something stuff started flying around lt only happened for a about a two week span then stopped