Your videos are great. It's cool to see how much effort you put into the quality of video, not just your work. By far the best quality woodworking videos I've seen yet from a video standpoint.
@weberwoodshop5 жыл бұрын
disturbinglee thank you so much!!!
@ludwigbarnes30586 жыл бұрын
Never hurts to ask!! Great vid. I’ve owned mine for about 3 years and I rarely use my miter saw now. I leave mine on my table saw. But, I like how you’ve hung it. Definitely a project for this weekend!
@weberwoodshop6 жыл бұрын
Ludwig Barnes thanks!
@2008enzed6 жыл бұрын
Super, super video production. Really like how you put it all together, the close-in shots, the excellent video quality, the music, and story, the passion. You have a real talent that goes far beyond woodworking. Bravo!
@weberwoodshop6 жыл бұрын
2008enzed Thanks so much! I really do put a lot into these and have a lot of fun doing it so I appreciate your comment :)
@lindrake83155 жыл бұрын
I love my 5000. Funny thing is I purchased it before I even got my table saw. Had it for 3 weeks sitting on my kitchen table trying to decide which saw to get. Sadly I just found your channel and its awesome.
@weberwoodshop5 жыл бұрын
Lin Drake thank you!
@MrGrant4406 жыл бұрын
That was a very satisfying video to watch!!! Great work on the sponsor! Keep up the great videos!
@weberwoodshop6 жыл бұрын
Grant Etherington the ...ehem... *sponsor 🤞🏼Thanks!
@wraith24403 жыл бұрын
I just watched this again. I bought a 5000 about three years ago for use with my old Delta table saw. I now have a Sawstop and the 'drop panel' for the 5000 is too narrow. I found that I could purchase a new drop panel for $39.99 from Incra. I should have it early next week and my 5000 will be back in business. I used it anyway last weekend for a project for my wife's sales booth. I love it.
@weberwoodshop3 жыл бұрын
Awesome!
@1987gnXtreme6 жыл бұрын
The music choice at 5:38 is exactly what I was saying in my head. When it started playing I started laughing. Great job. I think this is my next purchase after I get my TS/LS fence all set up. Looking forward to more from you. Great job.
@weberwoodshop5 жыл бұрын
Dennis Fawver thank you!
@ZacJones6 жыл бұрын
Great looking sled Blake! Great editing and high quality shots, thank you!
@weberwoodshop6 жыл бұрын
Melrose Design thanks!
@classroom_jams4 жыл бұрын
Hi. I was wondering: At the end of your video, where you made your custom rack, how did you attach the pegs for hanging. Did you screw them in or glue em on? What size did you opt for? I'd like to make one just like it for my shed. Thanks!
@metro60284 жыл бұрын
gotta say i actually enjoyed watching your video, very sincere and entertaining
@weberwoodshop4 жыл бұрын
peter beukers awesome thanks!
@michaell78774 жыл бұрын
Great vid Blake. However; I just don’t feel I need the 5000. I have the whole LSTS system, Incra 3000 miter gage, router, clean sweep, I have the I-Box and fix’s to get the Hingecrafter kits and spend the money on it. Neil and Mark are great... I have the rulers too. Keep the faith....
@streetlight38605 жыл бұрын
I'm a little confused, is it ok to be attracted to tools, I feel warm and fuzzy :) Yer Incra is definitely worth the cash.
@mikeygee24656 жыл бұрын
Ok, I just watched this for the second time! I’m sold! Rockler currently has a 15% coupon which is valid on Incra, so this is a no brainer! Thanks for a great video and review!
@weberwoodshop6 жыл бұрын
Awesome! Did you end up getting something?
@mikeygee24656 жыл бұрын
Blake Weber Yes. I purchased the Incra 5000. Haven’t unboxed it yet. Super excited!
@hunterdogztc4 жыл бұрын
Just ordered one of these for my shop this morning. My KZbin search led me to this video and your channel. Subbed. Excited to get this into my shop and take it for a test drive. Thanks for the great video.
@davidphan7010 ай бұрын
you're a little humble by calling this your hobby. I have a bunch of Incra products as well, but i suck at making youtube videos. and suck at woodworking. i enjoy working on kumiko projects. keep up the good work. I'm a little late to your video, but I still ran across it and enjoyed the video. LOL I also hugged my incra boxes when they came in.
@albreit692 жыл бұрын
I just purchased the 1000HD and the sled. I'm hoping to be able to make segmented bowls using the 1000HD. Wondering what the difference between your 5000 and the 1000HD is?
@celticcraps Жыл бұрын
Hey glad to find this. I know its old but thought id reach out. Current thoughts after having it for 5 yrs?. What is the purpose of the other part of the sled being cut off? Not used to seeing that.
@JamesSmith-co1kt4 жыл бұрын
I just got the incra 5000 a few weeks ago. Man that thing rocks! I have it set up on a ridged 4512 saw. I see you have yours set up on the left side of the blade. Is your saw a left tilt? If I read the instructions right shouldn't it be set up on the right side for a left tilt? I personally would like it set up on the left. Could you do a set up video and explain how you set it up and the reason you set it up on the left side of your saw?
@daveweber13315 жыл бұрын
Yup! Since Marc, The Wood Whisperer has given the 5000 an enthusiastic blessing, that thing has been on my wish list! You've just stoked that "wishing". :-)
@ivanscountrymusicandcars23574 жыл бұрын
Just got mine today. Watching this before my setup!
@carlstone70356 жыл бұрын
You need to add 5000 to your title! I watched all sorts of sled videos for a couple of days before Utoob finally got this one into my search results. 😏 And yours showed me the detail I'd been looking for. Thanks.
@weberwoodshop5 жыл бұрын
Carl Stone just did, thanks for the tip!
@lionelhernandez346 жыл бұрын
Hands down my 5000 was worth the money I paid, well built and very accurate right out of tha box. Congrats on yours
@weberwoodshop6 жыл бұрын
lionelhernandez34 thanks! Yes it’s a great piece of equipment.
@christinecahill28746 жыл бұрын
You are one lucky dude! I realized a long time ago that stuff like that never happens to me. So instead i just try working a lil more, trying a little harder to save. And although it doesn't work for all my wants, or needs. I just have to figure out a way to get along with what i do have. But, i am very happy for you. I laughed so hard when you layed your face down on the box. Lol that is sooo what i would have done. Us woodworkers and our tools. We turn into 7 year old boys on Christmas morning. 😊 congrats again! And glad too see you back with a little more steady content. Keep up the videos bud.
@weberwoodshop6 жыл бұрын
Hahaha glad you saw the humor in that!
@matthewbalkwell8824 Жыл бұрын
Is there a way to fasten the miter further back on the sled so you can cut and support deeper sheets of ply.
@TeamProsperity5 жыл бұрын
Yeah I see a Dewalt planer there, so how do you like it? I have a 12” Shopsmith I’ve had since the early 80’s and the one thing I hate about it is that adjusting the cut is by the table and not the cutter head, very annoying so I’m considering selling it and getting the Dewalt
@weberwoodshop5 жыл бұрын
Crackerjack the DW is a great machine.
@craignowell5126 Жыл бұрын
i have a sawstop which blad tilts to the left do you recommend using it on the right side or stay left?
@stephanemaciejewski78614 жыл бұрын
Amazing tools for fabulous job 👍. Sorry for my poor english, Just a little frenchy really imprest by your talent. Happy to find your vidéos 🤗
@weberwoodshop4 жыл бұрын
Thank you!
@rhihodag98736 жыл бұрын
It was very nice of Incra to send you these new "toys". I'm a huge fan of Incra - - great quality and accuracy. I've purchased several Incra pieces based on video use and reviews on their products. Typically, there are very few negative comments on the Incra products. I'm a believer! You have to give the IBox and Hingecrafter a try. Both are fantastic products which I love. Perhaps you can "ping" Incra to send you both of these. There is definitely a lack of good project videos on the use of these. I believe you could provide some great vids on both of these products. Thanks for your Video!
@weberwoodshop6 жыл бұрын
Yes, I've loved everything I own from Incra. They actually already sent me the iBox, just haven't opened it yet ;)
@DynamicJon4 жыл бұрын
Would love to have you do a follow up vid on this Sled, i've had mine for a while but just noticed today I must have bumped it out of alignment, would love to see how its working out for you, how you're keep it in alignment, tips and tricks. I've been meaning to cut out a few extra pieces of MDF for backer since there's always a bit of tear out on this over a conventional sled.
@thomdombrowski85723 жыл бұрын
So I have one, and am getting ready to set it up.. in the instructions, it talks about setting to the left or right of the blade, depending on blade tilt. do you tilt the blade for any type of other miter cuts, or do you use your miter table for those.. I am just trying to figure out if I should do what the instructions say or set it for the left hand side, as I have always used a miter gauge on the eft.. looking for opinions. thanks.
@weberwoodshop3 жыл бұрын
I do not tilt the blade when I use it because I don’t want to cut a bevel in the sliding table but you can if you want to.
@thomdombrowski85723 жыл бұрын
thanks for the reply it helps.
@wh0tube3 жыл бұрын
Isn’t having the fence and stop on one side of the blade only a bit of a shortcoming? For example, if you want to cut short segments from a long piece, it would be useful if the stop was on the other side. Not sure how you could do that with adjustable mitre gauges. Sacrificial fences maybe, but then how to use the incremental stop on the othe side?
@weberwoodshop3 жыл бұрын
No its not a shortcoming.
@mattlacarra20696 жыл бұрын
Just bought a "new to me" Ridgid 3650 that has a Miter 5000 with it. I'm so excited and have been finding reasons to cut right now. 90 degree cuts are so accurate and repeatable, but when I need to miter at 45 degrees, the fence crosses the blade path. I saw that you have the fence close to zero clearance as well, so what do you do when you miter? Do you re-calibrate when you go back to 90 degree cuts?
@weberwoodshop5 жыл бұрын
Matt LaCarra yes you do have to move the fence when you change the angle. Calibrating the ruler on the fence to zero out at the blade doesn’t make much sense here. I don’t use it that way. It’s more of a relative measurement for repeatable cuts.
@kevinthomas89094 жыл бұрын
So mine arrived today. Trying to decide it want to make it left or right side of the blade. I have saw stop 3hp. Thoughts?
@weberwoodshop4 жыл бұрын
Kevin Thomas cool! I never thought about it as an option. To me left of the blade seems like the only correct way but maybe just because I’m right handed.
@thepoplarshop6 жыл бұрын
What is the max length for making a crosscut using the sled ? And what is the max length you can set the stop ? Thanks, Eric
@weberwoodshop6 жыл бұрын
I'm not in the shop so I don't have the measurements on me at this time but there are several different models in different sizes. There is a version to fit just about everybody's needs. Check out all the specks on their website: incrementaltools.com
@davidsims24424 жыл бұрын
That's great!!! 😍 Glad they sent you some free stuff your the one that introduced me to that company and I love their tools.
@ianedwards77494 жыл бұрын
Hi, I have a small workshop as well and was wondering what table saw you use as I’m trying to find a decent compact saw. Regards Ian
@weberwoodshop4 жыл бұрын
Its an old saw that was discontinued. I bought it used.
@StevenDavisPhoto3 жыл бұрын
Would you say this is the BEST crosscut sled you can buy? I want something awesome for my new Sawstop PCS.
@weberwoodshop3 жыл бұрын
YES
@mikeygee24656 жыл бұрын
Blake, I’m finally getting around to setting up my sled. My Sawstop blade tilts to the left. Incra says I should use the right side miter slot. Does it matter?
@weberwoodshop6 жыл бұрын
Cool! I would recommend talking to Incra about it, they have excellent customer service and like helping people use their products.
@dondavis7695 жыл бұрын
I have a table saw that the blade tilts left on and I put the main sled in the right slot, cause Incra said to...and it works great set up like that--Incra told me if I wanted to cut some pieces with the blade tilted I should buy another cutoff sled and use that for the tilted blade cuts!
@dondavis7695 жыл бұрын
have you figured out how to mount a stop block to the cutoff sled? I need a stop block to set my stock to specific lengths for segments I wish to cut on my table saw. Thanks for any input
@weberwoodshop5 жыл бұрын
Don Davis it’s integrated into the system.
@LemonySnicket-EUC4 жыл бұрын
Actually it has 2 of them so you can double your pleasure.
@kevinlee78014 жыл бұрын
Do you have a video on your incra table saw fence? Specifically, setup and use.
@ndabox173116 жыл бұрын
I've had this sled for many years and love it. My sled is set up like yours, off cuts on the right. I just purchased a SawStop so I need to replace the off cut panel. My question is, since the saws table is longer on the right side should I leave the sled the same or reverse the set up. It can be set up either way. I'm very used to it the way it is but will it perform better the other way is what I guess I'm asking?
@weberwoodshop6 жыл бұрын
Yes I think you can set it up however you want to. I would contact Incra though, they have excellent customer service and like chatting with woodworkers about their product usage.
@SethBearden.5 жыл бұрын
How do you fine tune it to 90°? After doing the the 5 cut method mine was off but all adjustments are course and I have yet to land on a precise square. Couldn't find any KZbin tutorials that explain it as of yet... Thanks
@weberwoodshop5 жыл бұрын
S Bearden it has precision adjustment built into it as well.
@joeyfranks86224 жыл бұрын
Do you think this can take the place of a miter saw?
@russtaylor4242 Жыл бұрын
I've watched a lot of Incra miter sled vids. Does anyone clamp their work piece to something sacrificial underneath so the cut doesn't chip the surface of the work piece? This video and others always shows the piece being cut floating through the air through the blade with an inch gap underneath it. This is no worse than cutting without a sled, but usually home made sleds are run through the blade so they are almost zero tolerance between the sled and the blade?
@GageDrums Жыл бұрын
Mine comes today. I like the hanger idea!
@TheodoreRysz4 жыл бұрын
Hey Blake, I hope that you are doing well. Fantastic video! I recently purchased the sled and have been pleased thus far. I have noticed that I still have a small bit of play in the sled after initial setup? Did you encounter such problem?
@weberwoodshop4 жыл бұрын
Theodore Rysz III no I don’t remember experiencing that but their customer service is really good, they are all in Texas and they are real people that actually work for the company when you call.
@LemonySnicket-EUC4 жыл бұрын
It's adjustable. That play can go away.
@stevei76466 жыл бұрын
Hello Blake, looking to get the Miter 5000 - great video. As I have a small shop, I will be looking to hang up the sled as you have. How do you keep the Miter gauge from falling when it is hung up? Thanks Steve
@MrEMcookie5 жыл бұрын
Steve I the miter gauge is locked with three screws, so it won’t move :-)
@weberwoodshop5 жыл бұрын
It’s all connected together.
@danielkirkhart6 жыл бұрын
I think you mentioned it took you about an hour to set it up... is that including zeroing it in to your saw?
@weberwoodshop6 жыл бұрын
Daniel Kirkhart yes that part is pretty straightforward and I tuned up my table saw recently which helped.
@garybuelow53626 жыл бұрын
Great video, Congratulations on the new up grade and best yet FREE!, INCRA could not have made a better advertisement, now I want one.
@johnjucas33516 жыл бұрын
I am building a new house with a Woodshop attached. It’ll be 23 x 15’. I see that you use Incra products with your tablesaw. Is the frame that is attached to tablesaw all part of Incra ? If so, what exactly are the parts. I’m interested in the Router table and how it all is attached. Any help you can give would be appreciated. John
@weberwoodshop6 жыл бұрын
Yes it the Incra table saw fence system. Check it out on their website its awesome!
@TeamProsperity5 жыл бұрын
I had a lot of parts left over when I got done setting my 5000 up! I’m like what’s this for? What’s that for? 🤣🤣🤣🤣🤣🤣
@SQLKC4 жыл бұрын
Me too
@woodworker19786 жыл бұрын
the toilet bowl with wing nut idea is great. until i one day upgrade... running to hardware store now... thanks for the great tips...
@weberwoodshop6 жыл бұрын
Perfect! You might need that router bit for the T slots though. Its a great and simple system that I've used for years.
@CMRWoodworks6 жыл бұрын
Man, that thing is sweet! I’ve been eyeing it for a few months now.
@weberwoodshop6 жыл бұрын
Cool!
@raymondvillain5 жыл бұрын
About the large red panels: are the panels (utility panel and drop off panel) made of mdf?
@weberwoodshop5 жыл бұрын
Hank Hall yes it’s MDF in the core but covered with a hard plastic laminate on both faces.
@woodstermangotwood6 жыл бұрын
Wow, you put out one heck of a quality video. I too am an Incra Freak, and almost everything in my shop is Incra equipped. I have had many conversations with Perry McDaniel. He has tried talking me into teaching, but so far I've avoided it. I sure wish I would have thought of your approach. Way to go. I'm in the Incra Site Gallery "John from California". I look forward to seeing many more videos.
@wh0tube3 жыл бұрын
This is not a sponsored infomercial 😆 thanks for the review, now I’m getting one 😊
@weberwoodshop3 жыл бұрын
You’re welcome 😊
@MajDogMeat5 жыл бұрын
Because of this video, I bought the set up..very happy I did!
@weberwoodshop5 жыл бұрын
MajDogMeat awesome glad to hear that!
@DynamicalJon5 жыл бұрын
How was it aligning it to your saw, did you have to do the 4 cut test with it ?
@weberwoodshop5 жыл бұрын
Jon Singh yes I did the 5-cut method.
@befmx315 жыл бұрын
@@weberwoodshop How did you do it? To me, it doesn't seem like it will work for a miter gauge. I mean, the far end of the fence (closest to the blade) is not the pivot point like with a regular sled. So, with a regular sled, when you move the other end of the fence, either up or back, the opposite end (closest to the blade) does not move because it is the pivot point. With the miter gauge when you adjust the far end of the fence doesn't the other end (opposite end) also move since the pivot point is not at the very end? It's on the miter gauge, a few inches away from the end of the fence. I would like to use the 5 cut method but I don't understand how it will work with a miter gauge. Can you help?
@jcarlin3 жыл бұрын
Would it be overkill to try to use this with a (Sawstop) jobsite sized saw?
@weberwoodshop3 жыл бұрын
No.
@jcarlin3 жыл бұрын
@@weberwoodshop Do tell
@RC3981RC6 жыл бұрын
This video is gonna cost me money. LoL You do great work. Enjoy watching your videos!
@weberwoodshop6 жыл бұрын
Lol thanks!
@SuperWingman696 жыл бұрын
Blake, really like your shop. I have nearly an exact floor plan in my one Car garage. I’ve watched your Shop tour video many times, because I want to set up my wood shop like you have. I’m feeling a little stuck regarding how to get started with the process. Could you help / educate me? I also share the laundry facilities in my garage. Any help is greatly appreciated. I truly love watching your videos. Enjoy your new tools! Incra is fortune to have your support.
@weberwoodshop6 жыл бұрын
SuperWingman69 keep an eye out for tools on Craigslist and do your research so you don’t get suckered. I built my collection up over many years.
@Tantalin5 жыл бұрын
It's been 9 months now I'm wondering if you have given any opinions, thoughts or ideas on the system in one of your other videos or if you have an upcoming video describing your experiences with this system.
@weberwoodshop5 жыл бұрын
Tantalin sorry for the delay... I don’t really do formal review videos but I can tell you I absolutely love it.
@lonewolfmtnz3 жыл бұрын
What could be done if the saw did not have a way (track) to the left of the blade?
@weberwoodshop3 жыл бұрын
You would set it up the other way I guess
@jessjulian94586 жыл бұрын
Cool, I have all those Incra tool's and more.I just finished putting together my Incra router table with all the extras . Incra is all I buy if they have what I need . But they are much better if they are free. Thanks for sharing.
@Drewboy226 жыл бұрын
I would love to see a vid on your table saw fence. Pros, cons and whatnots. I’ve been looking for a better fence and like you, I prefer infra tools. Looking forward to it :-)
@weberwoodshop5 жыл бұрын
Drewboy22 I’ll try to do that someday :)
@1987gnXtreme5 жыл бұрын
I too would love to see an in depth video on the fence. I have the TS-LS system, but due to real life getting in the way, have yet to really use it. Love watching what that thing can do.
@ronhau15422 жыл бұрын
I’m very embarrassed to ask this question......but What is the purpose for sled? Is it mainly the benefit of clamping stuff down? That thing is sexy as hell and I want an excuse to have one!
@weberwoodshop2 жыл бұрын
Safer and more accurate.
@RADCOMJ15 жыл бұрын
Okay you had me when you cuddled the box. its nice to get something back especially when you have obviously spent a lot of your hard earned dough with them. BTW i hate you because I want one now lol
@Ricksp656 жыл бұрын
Will this work on old delta contractor saw model number 34-444? Thanks
@weberwoodshop6 жыл бұрын
Yes it should work on just about any saw.
@kitchenscience3246 жыл бұрын
Wow! I now have a reason to start a KZbin channel!..free tools 👍 yahhhhh! Thanks Weber! Btw, how goes the dovetails?
@weberwoodshop6 жыл бұрын
Sonny Pittman I’ve put the dovetails aside for now, too many other projects that I need to push out. Maybe I’ll swing back around to them in the fall or winter.
@ABeardedPanda6 жыл бұрын
Awesome video as usual! You're reaction unboxing everything is great 😂😂😂😂
@weberwoodshop5 жыл бұрын
The Wick Haha thanks!
@misscreant4 жыл бұрын
Does anyone know if this sled will fit on the sawstop job site?
@theswedishhand3786 жыл бұрын
Love your vids! Maybe you can do a give away with your "old" incra tools. Wink wink
@weberwoodshop6 жыл бұрын
The Swedish Hand I might just do that ;)
@S1234-l6m5 жыл бұрын
Can you still use your dust extractor with it?
@weberwoodshop5 жыл бұрын
S 12345 below the table-yes. But not the overhead collection.
@TheHandystanley6 жыл бұрын
Really nice. I am going to hold off purchasing this until I upgrade my table saw. Nice job on the video! You going to come up to the Bay Area Makers Faire this weekend?
@weberwoodshop6 жыл бұрын
I didn't make it but maybe next year.
@andrewdelane31376 жыл бұрын
Awesome dude, what an amazing product. Great video. 👍
@weberwoodshop6 жыл бұрын
Andrew Delane thanks!
@thedukeo76 жыл бұрын
Great video! Thanks for producing.
@weberwoodshop6 жыл бұрын
Thanks!
@consumeand4 ай бұрын
Love the hanging rack you built for it!
@TheAlogoc5 жыл бұрын
Incra does this for any table saw?
@weberwoodshop5 жыл бұрын
Goran jelenić yes, you cut it to fit your saw.
@mikegallagher7826 жыл бұрын
Can that sled be used on any of the saw stop table saws?
@weberwoodshop6 жыл бұрын
Mike Gallagher yes! When you saw me cutting the red platform I was customizing it to my saw. That is part of the set up process.
@mikegallagher7826 жыл бұрын
Got it. Thanks Blake. Thats a nice setup!
@MrKen-wy5dk5 жыл бұрын
@@weberwoodshop What if one gets a new table saw? Is your original customized setup now obsolete?
@weberwoodshop5 жыл бұрын
Mr. Ken no, you can order just the sliding table part of you get a new saw. Then you start over and make that cut again.
@markandbethbuild6 жыл бұрын
I really want an incra jig! Great video Blake!
@weberwoodshop6 жыл бұрын
Mark's Gourmet Workshop thanks! They are pretty awesome.
@WrenchAddiction6 жыл бұрын
Where’d you score that sweet table saw?
@weberwoodshop6 жыл бұрын
Used, several years ago. Its discontinued by DeWalt now.
@beardedpenguin37956 жыл бұрын
How can I get a Weber Woodshop sticker to put on my Incra miter sled?
@weberwoodshop6 жыл бұрын
Robert Barnowsky I’ll let you know soon in a future video.
@alimaleki2176 жыл бұрын
When a company sends you $700 worth of tools for free they ARE sponsoring you.
@weberwoodshop6 жыл бұрын
Ali Maleki you’re welcome to call it whatever you want. I’m just telling the story of what happened.
@alfiecrous76485 жыл бұрын
I am from South Africa, also do woodworking as a hobby, I get my Incra combo set this Friday, cant wait. I will also purchase the whole table saw fence setup and I-Box. Our money is very poor to the dollar, but incra is so great. I like your videos very much thanks.
@EM14736 жыл бұрын
I'm addicted to your videos! Is there a link I can go to, to purchase some stickers?
@weberwoodshop6 жыл бұрын
Woody120 Thanks!!! I’ll let you know how I’m going to distribute stickers soon in a future video.
@EM14736 жыл бұрын
Blake Weber thank you.
@ChinskiChat5 жыл бұрын
Nice vid - but how can you say you are not sponsored, then in almost the same breath say Incra sent you free tools to feature?!
@weberwoodshop5 жыл бұрын
ChinskiChat if you did not pick up on it it’s all a little tongue-in-cheek. Also they did not pay me and there was no obligation, agreement or contract on my part to make the video. Also, you are welcome to call it whatever you want but at least I was transparent and honest about how it all happened. This is a hobby for me. I don’t make a living from it. But making these videos for your entertainment is a lot of work. If they are good enough to convince a company to throw free stuff my way once in a while then I’m stoked. Wouldn’t you be?
@ChinskiChat5 жыл бұрын
Blake Weber yea, great work and I’m not surprised they’d send you kit to review. Jus saying, that IS a form sponsorship. I’m jus jealous cos in the UK it costs an arm and a leg to buy any Incra stuff ...
@fcschoenthal6 жыл бұрын
Great score and good video. Looking forward to seeing more use of the sled.
@weberwoodshop6 жыл бұрын
fcschoenthal oh you definitely will. Thanks!
@bunkersaver49806 жыл бұрын
Polished presentation, could you give titles of audio tracks?
@MajDogMeat5 жыл бұрын
I want free Incra stuff....... Lucky guy, congratz. I have the same Incra set up and yep...cost a few bucks but well worth it.
@weberwoodshop5 жыл бұрын
MajDogMeat thanks :)
@ericluba62875 жыл бұрын
That's awesome that would be my first choice I would love to have that miter sled he'll wish I had a table saw big enough to be able to use it and a place where I could set up
@damod3214 жыл бұрын
I just ordered mine 🤗
@zebalewski14 жыл бұрын
Great video thank you!
@weberwoodshop4 жыл бұрын
Thank you!
@LemonySnicket-EUC4 жыл бұрын
On sale now at Incra
@markarmstrong25926 жыл бұрын
Lucky for you but if you do not ask you not receive. It's a small gift for the amount of money that you've spent and you will appreciate it HAPPY WOODWORKING mate
@weberwoodshop6 жыл бұрын
Mark Armstrong thanks!
@RobyWanKenobi3 жыл бұрын
Love Incra tools plus they are only 15 minutes from my house.
@weberwoodshop3 жыл бұрын
Oh nice!
@MikeTatman6 жыл бұрын
Wow that thing is amazing!
@weberwoodshop6 жыл бұрын
Mike Tatman seriously!
@Graeme4086 жыл бұрын
I was expecting Barry White to give a mellow tune on the merits of Incra.
@weberwoodshop6 жыл бұрын
John Lowe, Photographist pretty much!
@carterp28586 жыл бұрын
Any news on the hallway cabinet video
@weberwoodshop6 жыл бұрын
Timber Guy I’ve put those aside for now, I need to finish the bedside tables and a few other projects.
@richayala26116 жыл бұрын
Thanks for the reply Brother! Rich
@sumosprojects6 жыл бұрын
Must say Incra products be awesome 👍👍👍
@weberwoodshop6 жыл бұрын
Sumo's Projects yup!
@stoicllc23523 жыл бұрын
I like that you put the correct tool porn music in