Increasing my front end loader lift capacity - MCG Video

[@MyClutteredGarage]

Want to support this channel? These are Amazon Affiliate links, so purchasing will help this channel by providing a small commission while not costing you any more. Thank you for your support! AirTec Lube-Shuttle Pistol Grip Grease Gun Kit: amzn.to/3O0pj1z LockNLube Grease Gun Coupler: amzn.to/3kPcvwu Recommended Grease: Valvoline Moly Fortified amzn.to/3jNM1Kv Nitrile Gloves: amzn.to/34Kg8OG Deerskin Gloves: amzn.to/2I17NNy My Video Gear: DJI Osmo Action 3: amzn.to/3JqbZno DJI Mic amzn.to/3J4vAIv DJI Air 2S amzn.to/3Yxid9n Rode Wireless Go II microphone: amzn.to/3eiJatG Canon M50 Camera (now Mark II): amzn.to/3vHW9uD Battery adapter for M50: amzn.to/2RshsBE Sigma 16mm prime lens: amzn.to/3vJDRcx Sigma 30mm prime lens: amzn.to/3epFneh Variable ND filters: amzn.to/3tmoHIs

[@ProductiveRecreation]

The Kubota B series are great, but they are small tractors. As you acknowledge, need to be careful with stuff like tweaking hydraulic pressure. Working beyond the machine’s design specs is a good way to break things. When it comes to loader capacity, it’s the front axle and the loader frame that will take the abuse. Of course, it doesn’t matter how big the machine is, we all find ourselves maxing them out!

[@davidolchewsky5365]

Nice video Ed. I've been thinking of doing this on my BX and my Grand L. Factory setting aren't always dead on. Watching you might be the encouragement I needed for me to go ahead get the kit and check my pressure. With respect to increasing your FEL lift capacity, I believe there are 'upgrade' cylinders that can be purchased from sites (ie. hydrosplus and others). The larger cylinders will have increased pressure / sq/in. therefore more lifting power. I do say this with some caution, since the entire FEL and its frame were all engineered together. So, I wouldn't want to 'overload' the main arms by lifting more than it was designed for; although there is usually a safety margin built in, so would think bigger cylinders should be OK. The cylinders aren't cheap, but they are much cheaper than another tractor. Love your channel and watch it every day!

[@MyClutteredGarage]

Thank you so much for your thoughtful comments! I plan to leave things alone from this point forward. I think I set the PSI at a reasonable limit. I just need to lower my expectations of the tractor. 🤣

[@RossOnTheLand]

That's a good test and comfortable upgrade Ed. I'm going to do the same in the spring. Thanks, and glad it was only water!

[@MyClutteredGarage]

Thanks Ross! Hopefully your cap is easier to access!

[@SteveB2601]

Ok I bought the part 10 months ago and today I put it in. I used 2 blue right out of the gate. Now I’m right around 2200. Night and day difference. Easy to do. I didn’t have hard lines for my third function so no need to take the tire off. 10 minutes and done. Keeping the other shims just in case the pressure drops at some point or I want to go a little higher. Thank you for the video

[@MyClutteredGarage]

Nice!

[@SteveB2601]

I just watched Messick he says you will get around 33 extra pounds of lift for every 100 psi so I added 300 psi so around 99 extra pounds. 99 doesn’t sound like a lot but for the B2601 it really is.

[@PeeksPeakHobbyHomestead]

Good video, Ed! If I remember right, my BX pressure was only about 1600-1700 and I bumped it up to right around 2,000. It was a night and day difference. Nice work!

[@MyClutteredGarage]

Thanks Lucas!

[@jamescochran8509]

I have 30 totes just like yours,get the tote tilted near the hood any way you can, I rock mine to get that weight behind that hinge pin ,just to get that last little bit of lift.

[@whenworkisplay]

Hello Ed. If we had more wide open space and regularly required more lift capacity, I would be considering trading up to a larger tractor. I do regularly ask our mighty little B2601 to "Be All Ye Can Be " and it continually amazes me, and the smaller size really works on our property. I checked our hydraulic pressure and it is at the top end of factory spec. I think our lift capacity as it is , is Kubota's way of saving me from myself. I really enjoyed this video , the conversation it has sparked in the comments, and I learned a few things. Take care, Ben

[@MyClutteredGarage]

Thanks Ben. Yes it’s a good machine!

[@leepickett1816]

Thanks for the video I had the same problem with my L2501 when I did the 50 hour maintenance. I was surprise when you change the hydraulic fluid filter you just unscrew it and quickly put the new one on spewing fluid everywhere. I lost quite a bit of fluid and put fresh back in and according to the bubble I was good, however after using the tractor for a while the bubble read low and after adding more fluid EUREKA. You are a brave soul taking that tire off.

[@MyClutteredGarage]

Thanks for watching!

[@donaldstrishock3923]

Here it IS; point-blank ,Mr. Ed. With you being a "Leader" & a "Athoritive Figure" with your Successful Channel, you Have to PULL them Shims OUT !! Tragedy & Trauma WILL maybe Become of You ;but "Deffinetly" to your Tractor. It it TRUELY Time for a BIGGER TRACTOR ....but keep the 2601 for all the small maneuvers. ( after all this "show&tell stuff " is kind of like "your bussiness"& just makes sense . Thank you Sir for the Excelent vidio and happy safe tractoring. Best wishes with all your endeavours.

[@jimmaag4274]

Calm down Nancy

[@donaldstrishock3923]

@@jimmaag4274 That's a good idea "karen".

[@jimmaag4274]

@@donaldstrishock3923 HAHAHAHAHAHAHAHAHAHA, I guess you showed me! You go girl!!!

[@EZStudRack]

I like the roof built out of tote!

[@MyClutteredGarage]

Thanks! Here’s the video… kzbin.info/www/bejne/oZXJpouemth1h9Esi=Q584b2vuIO-cNwqU

[@tractortalkwithgary1271]

Probably won’t be back in time tonight to catch your live stream Ed I will have to watch the instant replay …. Again!!!

[@TimDeGraff]

I know you don’t want to hear this, but if you want to lift even those smaller IBC totes with firewood you’ll want the L3902 or higher tractor. I have L3901 and shimmed to spec and it lifts the larger IBC totes so well now.

[@MyClutteredGarage]

Oh I know I could use a bigger tractor. That’s about the size / HP I’d like. 👍

[@jschickenfarmer50]

I have the L2501 and have no problem lifting a full tote of firewood. I even have a couple of the 325 gallon totes and it does them too. My tractor is factory specs.

[@SteveB2601K]

So I ordered the kit. So I can’t wait to try it. Great info.

[@MyClutteredGarage]

Great! Just be sure to make a modest improvement. If anything is needed. Good luck!

[@maintenancewithmike]

Phew...Only water is a good thing. I like this idea Ed, I'll keep an eye out for a while as I don't like rushing into things. Maybe wait till spring and see how Ross makes out. Thanks for trying this out and sharing. Cheers, mike

[@MyClutteredGarage]

Thanks Mike. It’s easy to test. Maybe you won’t need to do anything 👍

[@dolmarjoe9787]

Great video. I really enjoy your channel. I, too, have the same problem that you have. I've got a B2601 and can't lift an IBC tote full of wood with the front forks. Fortunately for me, my brother made a set of forks for my 3 point hitch and I can life an IBC tote full of wood with that set up. There are a couple companies that I know of that sell 3 point hitch forks. My tires are loaded with beet juice and I either put half an IBC tote of wood on my front forks or just carry a bucket full of dirt for a front ballast.

[@MyClutteredGarage]

Thank you! Yeah we have to accept the limitations of these compact tractors 😄👍

[@180Floridalife]

My new generator is 1700 lbs. its just too much for the B2650 to lift. Thanks and have a great one 😃👍

[@bhall7997]

Good stuff Ed. The rear 3 point lifts a lot more than front , I bet forks on back no problem lifting that tote 😀FYI on insurance Mine is paid off next month I received the KTAC insurance letter quote yesterday to continue insurance. The quote is $311.00 for year, which I will pay 😀mine might be higher than some I bought the mid-mount mower :)

[@MyClutteredGarage]

Good to know! Thank you!

[@tmccusk1]

Thanks for experimenting. Good video!

[@MyClutteredGarage]

Thank you!

[@GardenTractorBoy]

This was very interesting and it is good to know if the tractor is within spec, also to be able to change it with this kit. The water was a relief. We hope to be able to join the chat of your live stream on 19th assuming you are having one, it will be a year since you kindle invited us as a guest

[@MyClutteredGarage]

Oh very nice, Joseph & Iain!

[@GardenTractorBoy]

@@MyClutteredGarage You will have to prepare your British accent 🙂

[@johnmasker3581]

Great quick mod!!!

[@MyClutteredGarage]

Thank you!

[@johnmasker3581]

So proud you read the directions:)

[@GrampiesWorkshop]

How's she goin'? This was an interesting test!! It's nice to have the extra lift capacity eh. I hope being over spec doesn't create any other issues in the system. Thanks for sharing this. It's good to know. Take 'er easy!!

[@MyClutteredGarage]

Thanks Mike. I think I'm still in a "safe zone". You know we always want just a little more! :)

[@GrampiesWorkshop]

I hear ya!!@@MyClutteredGarage

[@PEI_Guy]

Informative video. Thanks

[@MyClutteredGarage]

Thank you!

[@terryk3118]

Was looking forward to seeing the installation of the wheel. Did you edit that out so you didn't have a three hour video?

[@MyClutteredGarage]

Yeah, sorry. Haha!

[@tractortalkwithgary1271]

I commented on a video that Lucas posted about his new tractor. IMHO, Kubota is going to have to shift gears somewhat. These other manufacturers that are coming on board in the compact tractor world are offering models that lift more, a lot more, all while offering much more deluxe models at a cheaper price. As much as I like Kubota, I wouldn’t blame anyone for going with another brand.

[@gcarmichael]

Great video. What are the wood crates called and where can one buy them?

[@MyClutteredGarage]

Thank you. You can find IBC totes on Facebook marketplace. I found them at a local much company - they held dye. You might like this video too. IBC Tote Firewood Storage - MCG Video #185 kzbin.info/www/bejne/oZXJpouemth1h9E

[@otisbailey5455]

Opinion... in spec leave it alone. Older hoses and seals may not be happy. Engineers design all associated parts to be compatible.

[@Northeast_Mainiac]

I know I don’t have to tell you about safety but use a jack stand, nice video, I will be doing this to my B2301 PS: I just noticed you have that screen for your front grill guard from Messicks’s, why did you upgrade from your grill guard that you made?

[@MyClutteredGarage]

Thank you. Messicks provided the grill guard for me to test. kzbin.info/www/bejne/jqfUepaPa8-boM0si=G7rZMWewgqrEywbZ

[@watershedoverlook]

I've been curious about this, so now you've got me thinking I'm going to have to look into this further. Do you know...does the test have to be at the loader valve, or can it be any hydraulic outlet, like the rear remotes? Also, you had my blood pressure going up when you started talking about that leak...glad to know it was a non-issue!

[@MyClutteredGarage]

Hi Chris. I don’t know if you can check the pressure from other locations. I’m guessing yes? Thanks for watching! Good luck!

[@whenworkisplay]

Hello Chris. I have the same guage that Ed used. Got it from Amazon. A few fittings from the local hydraulic supply shop and I was able to connect it to the 3rd function system, where I would connect the grapple . I was reading above 1950. Page 36 in the manual mentions 1891 to 2005 psi, for the B2601, so I felt that was about right. Hope this helps. Ben

[@watershedoverlook]

@@whenworkisplay Thanks Ben. I have a gauge on the way. I don't know if I'm gonna install any shims, but I am curious to know what the pressure setting currently is.

[@deanmoore420]

I did that with my John Deere 2038R John Deere is a lot more simple than that. I had a gauge I just had to adjust the pressure relief valve and one good thing about John Deere. You don’t have to add any shims it’s simple that’s why I went with John Deere. but great video.👍

[@MyClutteredGarage]

Thank you! Yeah I’ve heard they’re pretty easy to adjust 👍

[@deanmoore420]

@@MyClutteredGarage yes they are and I’m so much happier with it. Plus I added a Curtis cab with heat and a winch wiper. I am extremely happy great video.

[@Peachmountainfarm]

Never knew you could do that, wonder if I could do it on my John Deere

[@bobpurs]

JD has kits also. Did it to my 790 and made a pretty big difference. Mine was about 400 psi under max

[@aaronanhalt5088]

Tell us about your motorcycle. Is it a yamaha fz?

[@SteveB2601K]

I don’t know if you answered this yet, but what coupler did you use or ask for?

[@MyClutteredGarage]

I them I have the swift-tach loader with flat face connectors. If you don’t have that front unloader, you’ll have to let them know what you have.

[@SteveB2601K]

I have the same tractor you have

[@tunintunin3417]

Thank you for your video. I just think 120 for 4 washers and a gauge is crazy pricey.

[@MyClutteredGarage]

Thank you. The cost is $69. Here’s the link. www.bxpanded.com/pressure-test

[@MetaView7]

It's time for a bigger tractor

[@MyClutteredGarage]

Agreed! 😄

[@BradMyers]

Time to trade it in and get you an MX tractor. (Always easy to spend someone else's money)

[@MyClutteredGarage]

🤣🤣🤣

[@CentralNH]

Best way to increase lifting capacity...buy a bigger tractor period!

[@MyClutteredGarage]

Can’t argue with that!

[@marteinngunnarsson5332]

More lifting capaciti =bigger tractor.

[@enduser1982]

Doesn't surprise me the lift capacity is crap. I've got a Kubota excavator, it's great anyways they are trying to sell me on a 26 series. I've currently got a Mahindra 26XL at factory settings its paid is 2500 600lbs more than the Kubota!!!!

[@RCAFpolarexpress]

🚧🚧Full Watch On Both You Tube and Face BooK Sir Cheers 👍👌😇✨🚀🍻🚧🚧

[@MyClutteredGarage]

You rock!

[@RCAFpolarexpress]

@@MyClutteredGarage Thank You Sir 🎵🎵😇👌💪🍻

[@RCAFpolarexpress]

Good Evening Sir Ed 😇👍Very Nice Kit and Very Good Hydraulic Gage 👍😇👌 You LIQUID FILL REAR TIRE ( STAY ) 🤣👍Nice Fun Puppy Dog 👍💖👌😇 We Have A Full Lift Off 😇👌👍💪✨🚀 Very Nice Informative Video 👍😇👌 Good Water News Sir 🥴🤣👍 Cheers 🍻