Incredible Repair Techniques! Witness Nissan Car's Right-Side Collision Transformation!

[@michaellytra5122]

I'm a panel beater with over 20 years in the trade. Nothing wrong with your method of repair great job. But using that air chisel without ear muffs and using a mig welder without a full welding helmet is crazy. I'm 62 years old now with hearing aids from industrial deafness. Wish someone gave me a hard time about not wearing ear muffs.

[@xinxianshi]

Thank you, Michael, for your feedback and sharing your experience. You bring up an important point about safety in the workshop. It's crucial to prioritize personal protective equipment such as ear muffs and welding helmets to prevent potential hearing damage or eye injuries. Safety should always be a top priority in any repair work. I appreciate your perspective and reminder to prioritize safety in all aspects of the job.

[@multibusa]

A perfect response but will you follow your own advice and wear the correct equipment? The skills evident in this video are not done proper justice by the irresponsible disregard for personal safety. Hearing deficiency is bad enough but you only get the one pair of eyes and using any welding device without a proper a head shield is lunacy. Other than these obvious draw backs I really enjoyed watching a skilled pair of hands at work. I’m interested to know if the amount of man hours and parts involved in the extensive repair of this vehicle was financially viable?

[@johnc.fonseca8961]

It's great to see.

[@shanewilliams1216]

I was in the Auto body paint industry for 45 years ( Retired in Nov 2022) PPG-certified Refinish tech for most of the 45 years, and this guys work is border line HACK WORK. He makes for a shit load of cleanup work by trying to go fast with an air chisel and pry bar instead of drilling our spot welds and making for a cleaner repair job!!! I worked behind many danm good and fast bodymen and this guy couldn't hold a candle to them !!! I could only watched 2 minutes and seen all I needed to see. We still call them BUTCHERS!

[@donalfinn4205]

Yawn.

[@ora-sora_7219]

Great work, just started apprenticeship in a bodyshop and this video proved helpful for a project we’re working on. Keep it up!

[@gonecywers]

This man can work metal!! Such a great skill and a beautiful finished product. You are to be commended, sir.

[@xinxianshi]

Thank you for your positive feedback, Silver Glide! We always strive to provide high-quality work and ensure customer satisfaction. It's great to hear that our skills and finished product are appreciated.

[@KevinP32270]

yes he did great work BUT that car will never be safe in a crash EVER again. the manufacturer tested and built those cars to work a certain way in a crash. his repair can NEVER fix that. in. another crash humans are going to die in that car.

[@marksmallman4572]

​@@KevinP32270disagree, its safe.

[@KevinP32270]

@@marksmallman4572 did the manufacturer tell you that after they did a post repair inspection?

[@RalfCrombach]

Dieser Mann ist ein Künstler der seine Kunst perfekt beherrscht 👍👍👍

[@jeffries1232]

I got to hand it to this guy .He repaired that car before i even finished my lunch . What a fantastic result

[@paulturner6859]

Another great job Han , keep up the great work .your a master at your craftmanship

[@xinxianshi]

Thank you for your kind words and for taking the time to leave a comment. Our team always strives to provide the best service and we're glad that you appreciate our work. It's customers like you who make our job so rewarding. Thanks for your support, and we look forward to serving you again in the future!

[@nforbes]

@@xinxianshi ❤

[@anupamsircar111]

Wow!!! It's rare to find such talented people who know everything about what they are doing.

[@xinxianshi]

Thank you for your appreciation! Skilled professionals who demonstrate expertise in their work can indeed achieve remarkable results. If you have any specific questions or if there's anything else you'd like to discuss, feel free to let me know!

[@latisimusd]

Not a body repair guy, however, can see his application techniques, and how it works with his skills. WOW - wished I had them. Great job!👍

[@xinxianshi]

Thank you for your message, I am very glad that you like this video, I hope you will follow us as you do, thank you

[@omharis6748]

HEBAT MECHANIC dari Luar, Sangat Ahli Sekali, Cekatan gak banyak omong, Anak2 mudah yang hebat, Patut ditiru oleh pemuda2 kita di Indonesia...., jangan mau kalah dgn orang luar kalau ingin maju,..Lihat cara mereka bekerja dgn mdh nya mereka menyelesaikan suatu pekerjaan.,, Kagum saya melihatnya , ..Kapan Pemuda Indonesia bisa spt ini,......WHEN.. ??? Saya Tunggu.!!!

[@youcefhelali1048]

Maitrise technique ; concentration extreme ; travail ordonne ; la suite dans les idees ; tres grande coordination dans le travail ; impassible ; tres genereux dans le travail ; tres belle finition ; enfin tout y est . Vous faites un excellent travail ; continuez vous ne le regretterez jamais . Bon courage .

[@claudiohenrique4363]

Parabéns Han, ficou um ótimo trabalho, você é um excelente profissional.

[@xinxianshi]

Obrigado pelo seu comentário, Claudio! É sempre ótimo ver profissionais habilidosos como o Han sendo reconhecidos por seu trabalho árduo e dedicação. É preciso muita paciência e atenção aos detalhes para executar o tipo de trabalho que ele faz e é impressionante vê-lo fazê-lo tão bem. Tenho certeza de que ele aprecia as palavras gentis de encorajamento. Obrigado por tirar um tempo para compartilhar seus pensamentos!

[@claudiohenrique4363]

@@xinxianshi Muito bom e sucesso .

[@Pontiacdreams]

This is art in motion! Expert’s always make it look easy. Impressive

[@xinxianshi]

Thank you so much for your kind words! I'm thrilled that you find the process impressive. We strive for excellence, and your appreciation means a lot. If you have any questions or if there's anything specific you'd like to know about the process, feel free to ask!

[@whykenneth]

No doubt he has some crazy repair skill, patient and dedication. What a beautiful work and transformation!

[@xinxianshi]

Thank you so much for your recognition and appreciation for others! Your encouragement will make him work harder to learn and improve his skills.

[@minmin-fs1nn]

@@xinxianshi everyday he work harder and harder, the boss can get his new Ferrari faster

[@roccosound8825]

Impressive I'm amazed and really impressed. Job very well done. And the end result? Looks like the damage never even happened. The dent pulling technique in the rear quarter panel at 8:00 to 8:05 is very impressive.

[@xinxianshi]

I'm glad you found the repair impressive! The process of fixing the rear quarter panel dent showcased the skill and precision involved in the work. The goal of such repairs is indeed to restore the vehicle to a condition where the damage is virtually unnoticeable.

[@michelrobert4584]

Bonjour de FRANCE, moi je dis respect pour la qualité du travail effectué et alors quel niveau supérieur de compétences pour réaliser cette remise en état qui était vraiment endommagé, bravo à vous et c'est un plaisir de voir votre travail.👌🧔‍♂

[@philippepourrat2256]

Cette voiture serait-elle déclarée économiquement réparable en France ?

[@flat4-]

Excellent work, I think about every body shop will hire you in an instant. The skills you have are not learnt anymore in schools and education.... thanks

[@xinxianshi]

Thank you so much for your kind words! We truly appreciate your positive feedback. Our team strives to deliver high-quality work, and it's always rewarding to hear when our efforts are recognized. If you have any more comments or questions, feel free to share. We're here to assist you!

[@rdfontelar5854]

your great mechanic han,a big asset to car company.keep it up!

[@carlossandoval5069]

Excelente trabajo!!! En el proceso de reparación se observa que tiene mucha dedicación por el trabajo que hace para reparar ese vehículo!!! Mis felicitaciones porque en el paso a paso se observa con claridad toda la reparación!!!👍👍👍👍👍

[@xinxianshi]

¡Gracias por tus amables palabras!

[@luisrocha2909]

I like your time laps videos. It's apparent that the worker is a highly skilled technician. In the United States of America, an employer would be under violation of not providing proper safety equipment, such as a welding helmet for their employees. Please wear a Quick Darkening welding helmet. God bless you 😊😊

[@xinxianshi]

Thank you for your compliment and concern for safety. We take safety very seriously and always use proper equipment to ensure our workers are protected. God bless you too!

[@TumbleFig]

"We always use the proper safety equipment, except, you know, on video right here. But I swear it only happened this once."

[@swordhemila6608]

un travail d'artiste. bon courage d'algerie

[@mikemoore5173]

Outstanding!! With the cost of cars nowadays as long as the repair is done right this can help out people that can’t afford a new car.

[@xinxianshi]

Absolutely! Properly executed repairs can significantly extend the life of a vehicle and make it more accessible to those on a budget. Skilled technicians like the ones in the video play a crucial role in ensuring that repairs are done correctly, maintaining safety and functionality. It's a great way to make automotive ownership more sustainable and cost-effective.

[@tonz2317]

You guys are giving negative comments.hats off to this guy showing his skills and abilities his gifted in his trade.whatever comments you all giving as long as the car is repaired and on the road.unless its an aircraft than we all can give negative comments.

[@stephen1774]

All of these Monday morning quarterbacks,I don’t think have even the skill Han has in his little finger.They are criticizing from their couch.Han is the best.

[@adriansuarez885]

I think the video is about the quality of the work step by step and the truth Very good work

[@Doug....]

Absolutely incredible. Such skill. What a superb craftsman!👍👍👍

[@xinxianshi]

Hi Doug! Thank you for your kind words, we're glad you enjoyed watching the video. The craftsman is indeed very skilled and we're fortunate to have him on our team. Thank you for your support and have a great day!

[@JenniferTeeny]

I love this works ❤ help me

[@johnnorman1793]

This repair would NEVER happen in Australia, The insurance company would have declared it a "write off" for sure. I'm sure ANY body shop in the world would love to have you working for them you are a VERY skilled body repair technician.👍👍👍

[@xinxianshi]

Thanks for your comment, John! Actually, this kind of repair is quite common in China, and skilled technicians can fix even more severe damage. Sometimes, two damaged cars can even be combined into one fully functional vehicle. It's amazing what can be done with the right expertise and tools!

[@benjamin3budkdf3]

Well john. Never happen in Australia is debatable. I have done a few of these over the years, comes down to what brand of car and what it is insured for. But having said that. The insurance companies are getting stricter by the year. I can`t upload my pic`s of the last one like this I done around 2 years ago, just as bad. You can buy the whole side one peace which starts from the front pillar all the way back to the Quarter panel, some makes even come with the tail lamp panel as well. But of cause you need to be a top quality panel shop with a proven track record and all the latest inverter spot welders and mig welders. No heating with an oxy blow tourch allowed for many years now.

[@danmyname]

My comment got deleted because I mentioned the chassis would have been bent and it wasn't corrected properly with a computer. If the video maker only list the positive comments then I do believe there are others who made the same comment as me but was never shown. Very disappointing.

[@xinxianshi]

Hey bro no one will delete a comment unless you reply it under someone else's comment

[@maleehaghani6938]

❤ ❤😂🎉😢😮😅😊❤😂😂🎉😢😢😢😮😮😊

[@frankbarberi4674]

You are a skilled artist. Very impressive.

[@RickaramaTrama-lc1ys]

This Tech is an incredible professional and what a thrill to watch him transform this car from a hopeless wreck into a restored beautiful car. It's so impressive and would not be done here in America because they imply "Total" all cars that are difficult to repair so you will have to buy a new one. Here it's all about the money and nothing else matter~!!! EXCELLENT JOB~!! New Sub Today

[@xinxianshi]

Thank you for sharing your positive experience and appreciation for the technician's skills! It's wonderful to hear about the transformation of the car and the dedication to restoration. Your comment also sheds light on different approaches to car repairs in various regions. If you have any more thoughts to share or if there's anything specific you'd like assistance with, feel free to let me know.

[@gerardhogan3]

Greetings from Australia. Mate you are one super talented man. I really love your work!

[@xinxianshi]

Thank you for your kind words!

[@kamranaslam2044]

Excellent Work of Restoration. Well done Bro...

[@SalehSaud-qf9wt]

He replaced the major part 05:45

[@garypilet]

@bluey , its so awesome to watch a person with skills as such as this guy , a awesome repair from a man that puts his heart and sole into his job , ! well done !!!

[@xinxianshi]

Hi, glad you like this video, your support means a lot to us

[@wwiewolle5849]

Hello Han, that wasn't easy to fix, but you repaired the car perfectly again! Bravo...🛠🎨👌👍

[@xinxianshi]

Thank you for your kind words! I'm glad you enjoyed the video and appreciate your support

[@JoseAlvarez-oe8lp]

mi amigo eres un genio que barbaridad no lo puedo creer felicidades nunca había visto una persona como tú eres un artista esto es un 🎨🎭

[@xinxianshi]

¡Muchas gracias por tus amables palabras! Me alegra saber que aprecias el trabajo y la habilidad que se muestra en el video. La reparación de vehículos, especialmente cuando se realiza con maestría, puede ser considerada como una forma de arte. Si tienes más preguntas o si hay algo más en lo que pueda ayudarte, no dudes en decírmelo! 🚗🔧🎨🎭

[@slims8753]

What is so incredible is that it only took you 15:16 to do the repair!!!!😂 Incredible skill.

[@xinxianshi]

Although it looks fast in the video, that's because the video has been edited and sped up. In reality, the repair work lasts 3 to 5 days.

[@JohnMakgetha-ex8ph]

Am definitely sure this great master piece was done all in one day.

[@xinxianshi]

Actually, the repair for this car took four days. The video might make it seem faster due to editing.

[@martitinkovich4489]

Not by a longshot!

[@cordovanbee]

Always looks easy when watching a Master at work!! Nice!

[@HanabangIrawan-nu7uo]

Edan , skillnya .....kerja sendiri pula , gk kebayang belajarnya berapa lama dulu , luar biasa

[@xinxianshi]

@HanabangIrawan-nu7uo Terima kasih atas komentarnya! Sungguh luar biasa melihat keterampilan dan kerja kerasnya. Memang diperlukan waktu dan dedikasi yang lama untuk mengembangkan keterampilan seperti itu. Dia benar-benar menunjukkan kemampuan yang mengagumkan dalam pekerjaan restorasi mobil ini.

[@riazhassan6570]

Wow! Perfect repair, fine workmanship

[@xinxianshi]

Thank you for the kind words, Riaz Hassan!

[@tristanbergh8655]

you are so assired and deft. it’s a pleasure to watch you work!

[@tristanbergh8655]

*assured

[@xinxianshi]

Thank you, @tristanbergh8655! We appreciate your kind words and are thrilled to hear that you find our work enjoyable to watch. If you have any questions, requests, or if there's anything specific you'd like to see in future videos, feel free to let us know. Your support means a lot to us! 😊🚗🛠️

[@dianeruiz0721]

This type of damage and repair would never fly in the US. The insurance company would’ve written it as a total loss and available for parts only.

[@xinxianshi]

Thank you for your comment, Diane Ruiz. Repair standards and regulations can vary between countries and regions. In the US, insurance companies may determine a vehicle to be a total loss based on various factors such as the extent of damage, repair costs, and the vehicle's value. It's important to consider local laws and regulations when assessing repairs and insurance coverage.

[@marcovalerio4922]

Your comments are saying that you wanna live with third world standards. Congrats. Just ask yourself how safe are these cars after being fixed!!

[@goldie260]

Then someone else would buy it and do the same and resell it,,, just look at goonzuad how many salvage cars they bought and sold

[@remyromero2613]

You ain’t lying . This damage was similar to mine and insurance didn’t want to cover it so I had to pay out of pocket 🤷🏻‍♂️ this is a trash state

[@david888a]

@@remyromero2613don’t understand why your insurance will not cover it since u hv insurance, unless you r under insured

[@jacktennant8426]

You, are well versed in what you do! There is no doubt in my mind that you will be very good with your repair!

[@xinxianshi]

Thank you for your confidence!

[@joseoscar6297]

Cara ficou ótimo, oque vc fez nesse carro, vc é um gênio 👍👍👍👍👍

[@xinxianshi]

Muito obrigado pelo elogio! Fico feliz que tenha gostado do trabalho realizado no carro. Dediquei bastante esforço e habilidade para restaurá-lo. Apreciação como a sua é muito gratificante. Obrigado novamente! 👍👍👍👍👍

[@ош-щ9с]

@@xinxianshi Скажите,а на местах сварки внутри будет ржавчина через год?

[@yokapok6490]

ce que vous faites c'est du très haut niveau technique !!! chapeau !!! 👍👍👍👍👍👍

[@xinxianshi]

Merci beaucoup pour vos aimables paroles ! Le travail effectué dans la vidéo est en effet de haute technicité, et je suis ravi que vous l'appréciiez. Les professionnels qui réalisent ces réparations automobiles de haute qualité méritent certainement des éloges pour leur expertise et leur savoir-faire. Si vous avez d'autres commentaires ou des questions à poser, n'hésitez pas. Votre rétroaction est très appréciée ! 👍🚗🔧😊

[@robertowillamemagalhaeswil8129]

Vc trabalha muito bem, parabéns pelo excelente trabalho vídeo também já me escrevi no seu canal é maravilhoso. 🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒🖒👏👏👏👏👏👏👏👏

[@georgekalache9355]

Very very smart engineer 👏👏👏👏👏👏 unbelievable work , he knows what he’s doing 100000%.

[@xinxianshi]

Thank you for appreciating the engineer's skills and work! If you have any specific questions or if there's anything else you'd like to know or discuss, feel free to let me know.

[@salimsalm1615]

انت فنان موهوب في عملك تستحق كل الاحترام وتقديري لك 👍👍👏👏🙏

[@stephenwhitemore1519]

What ever they are paying that young man, it's not enough. Fascinating to watch, thank you for sharing. Most appreciated.

[@xinxianshi]

It's indeed a captivating process, and the skills demonstrated are commendable. If you have any more questions or if there's anything else you'd like to discuss, feel free to let me know!

[@maurizio48ltt13]

You work a metal very good I am amazed by the precision of your cuts and the perfect adaptation of the pieces obtained from the donor.

[@xinxianshi]

Hello, thank you for your praise, because our accessories are all original, and the matching degree with the car body is very high. It also means that the car body size is restored just right, so that the vehicle parts can be assembled smoothly.

[@edisonlima550]

Quem manja, manja, muito bom, parabéns 👏👏, essa é a linha.

[@xinxianshi]

Muito obrigado pelo seu apoio e comentário positivo! É sempre ótimo ter reconhecimento pelo nosso trabalho. Continue acompanhando nossos vídeos!

[@FabienMsi]

Bonjour, c'est vraiment du bon travail. Un grand plaisir de te regarder. 🙏

[@xinxianshi]

Bonjour! Je suis ravi d'apprendre que vous appréciez le travail présenté! 🚗🔧😊

[@BK-qp8zp]

Excellent work! Just a suggestion for a future video, I would like to see how the airbags are replaced. I agree with other posters that this car would have been totaled by the insurance in the U.S.

[@xinxianshi]

Thank you for your kind words and suggestion! We will definitely consider making a video on how to replace airbags in the future. It is interesting to hear your perspective on how insurance companies in the U.S. may handle this type of repair.

[@Holllywoodclips]

I really love your work, i have been so pationate about learning this panel beating skillz, wish i was close so you could teach me to learn, love your work so much

[@xinxianshi]

I appreciate your kind words! Learning panel beating and auto repair skills can be a valuable and rewarding endeavor. If you have access to resources and tools, you can start practicing and improving your skills. There are also many online tutorials and courses available that can help you get started. Keep learning and practicing, and you'll continue to improve your skills. If you have any specific questions or need information on this topic, feel free to ask, and I'll be happy to help!

[@martitinkovich4489]

Take a body repair class............they'll teach you.

[@benjamin3budkdf3]

I have to point out that this style of repair is illegal in Australia. You can not do a sectional repair on the inner high tensile panels and then butt weld them as you can on the outer much thinner sill panel and outer pillar. Those welds will split apart if the car is hit again safety reasons. Those inner panels must be welded in as complete panel. Meaning that you must cut at least 50 mm to 100 mm past the size of the inner structural high tensile steel sections so you can access and remove it and replace the whole panel as it comes from the manufacture. Means a little more work. The heat generated from the butt weld will weaken it dramatically and will split right along that weld you made in the next accident, or even cause hair line fractures over time. I`ll bet money on that you had trouble getting door gaps when trial fitting everything by the way you went about pulling the damage out. Like a peace of string laid out straight, the distance of both ends will shorten when you use your finger and slide the middle of it one way and then slide it back to where it was. both ends of the string will still be shortened. Chief Eze Liners have at least 3 pull posts some have 5 pulling posts. But next time you have a similar hit ,try releasing the anchoring clamps just a little on the bed itself but as tight as you can make them on the pinch weld so they will move little under pressure on the bed. Then put a pull on both of these anchoring clamps just a little away from each other and leave that pressure on them. Now you can go about pulling the damage out. You will see how much easier the damage will come out and have a easier time getting door gaps again. Just like that piece of string if you pull on each end the string will straighten up by itself, lol . Wish it would be that easy on the car. Or you could put a Porto power in between those anchoring clamps and put pressure on them while you pull the damage out. helps the damage come out more easily and return the correct length of that sill panel and maybe even the wheel base length if it was a harder hit to shorten the wheel base on that side. Don`t forget to check the indirect damage on the other side, eg. door gaps will open up from the hit. But will normally close back up to factory size if the damage is pulled out correctly. I did enjoy watching you repair this car, you do have great skills and there is always new things to learn in the auto industry, I started my trade in 1984. Boy have I seen a lot of change over the years. Not just the cars themselves, but all the equipment used in a panel shop or some call them body shops ,lol Enjoy your work. You get a good feeling when the customer comes and sees their car all nice and new.

[@xinxianshi]

Thank you for your detailed comment and for sharing your knowledge and experience in the auto industry. I appreciate your insights on the repair process and the importance of using the proper techniques for safety reasons. It's always great to learn new things and I will definitely keep your suggestions in mind for future repairs. Thank you again for watching and for your kind words!

[@selwynandrews9665]

With my tiny amount of knowledge on this subject I thought the hammering would work-harden the steel and then the welding would make it brittle and crystalline. I understand modern cars are made of high-carbon steel and this isn't patched as easily as older mild steel. Agreed that this repairer has skills, but repairing the inner panels that way doesn't seem like it would restore the original strength of the chassis. I see the repairer has replied positively. KZbin is great for sharing knowledge, but it's important that people with your level of experience comment when safety may be compromised. Thanks!

[@fabiodenardi904]

Eccellente lavoro. Sei un mago!! Saluti dall'Italia.

[@xinxianshi]

Grazie per il tuo commento, Fabio! Sono felice che il mio lavoro ti sia piaciuto. Saluti dall'altra parte del mondo!

[@احمدالجميلي-و4ب]

احسنت انت فنان وعملك راقي جدا قمة الروعة ىبي يحفظك

[@xinxianshi]

شكرًا جزيلاً لك! نحن نسعى دائمًا لتقديم أفضل الخدمات والعمل بجدية واحترافية. تقديرنا العميق لتعليقك الرائع ونأمل أن نستمر في إرضاءك. الله يحفظك أيضًا.

[@leotorio9815]

Excellent job, Han. Keep up the good work. Cheers!

[@xinxianshi]

Thank you for your kind words!

[@asukeyaerbete3646]

Good job brother 👍👍

[@xinxianshi]

Thank you so much for your support and encouragement!

[@sandeewood2948]

Unbelievable amount of work.great work..

[@xinxianshi]

It's wonderful to hear that you appreciate the tremendous effort and great work that went into the project!

[@Beautiful_USA1]

Good informative video. From where did you buy the car doors? So all car door with damages have to be thrown away? How does it work in expensive cars like lexus and BMW?

[@xinxianshi]

I'm glad you found the video informative! In the video, they may have mentioned a few options for sourcing car doors, but typically, replacement car doors can be obtained from various sources: Auto Salvage Yards: Many people find used car doors in salvage yards, which can be a cost-effective option. Aftermarket Parts: Aftermarket auto parts stores and online retailers often offer new or refurbished car doors. Car Dealerships: Dealerships can provide OEM (Original Equipment Manufacturer) replacement doors for specific car makes and models. Regarding damaged car doors, they don't always have to be thrown away. Depending on the extent of the damage, some car doors can be repaired by skilled auto body technicians. However, severe structural damage might necessitate replacement. Expensive cars like Lexus and BMW also follow a similar process, but the cost of replacement parts and repairs can be significantly higher due to the luxury and precision engineering involved. Many owners of high-end vehicles prefer to use OEM parts to maintain the quality and performance of their cars. It's always a good idea to consult with authorized dealers or reputable repair shops for such vehicles. If you have more questions or need further information, feel free to ask!

[@Beautiful_USA1]

@@xinxianshi Thank you so much for your reply. Can I send you a picture of my car? I would like to have an opinion from an expertise like you as faced such situation for the first time. Thank you.

[@celioinfante2287]

Trabalho impecável sem dúvidas! Entretanto, pergunto se esses veículos tornam a funcionar exatamente como antes da colisão, tendo em vista que alguns aqui no Brasil, seriam considerados como perda total?

[@xinxianshi]

Um reparo automotivo， mesmo quando bem feito， pode não restaurar completamente um veículo ao seu estado original antes da colisão.Isso pode depender do grau de dano e da qualidade do reparo.Mesmo com reparos excelentes， pode haver diferenças sutis， especialmente na estrutura e na resistência do ve Nos casos mais graves， onde ocorre danos substanciais na É importante lembrar que a segurança é uma prioridade. Mesmo se um veículo for reparado, você deve garantir que ele seja seguro para dirigir e atenda aos padrões de segurança aplicáveis. É sempre aconselhável procurar a orientação de um profissional de reparação automotiva de confiança e garantir que o trabalho seja feito de acordo com os padrões de segurança e regulamentações locais.

[@desertfox5657]

Thanks for sharing your hard work and dedication.

[@moisesnogueira1541]

Excelente trabalho parabéns

[@xinxianshi]

Muito obrigado! Ficamos felizes que tenha gostado do trabalho. Agradecemos pelo seu apoio e elogios.

[@Jeffrey-c2z]

You are a master ! I liked learning all I have learned from your video !!

[@waratah5422]

Great rebuild, but would like to see more interier protection when angle grinding and mig welding

[@xinxianshi]

Thank you for your feedback. Ensuring proper safety measures during automotive repairs, including interior protection during angle grinding and MIG welding, is indeed crucial. These safety measures help prevent damage to the interior components of the vehicle and protect against potential hazards such as sparks, fumes, or debris. Professional repair shops typically have established safety protocols that include appropriate shielding and covering of interior areas to minimize the risk of damage or contamination. This may involve the use of fire-resistant blankets, plastic sheeting, or specialized covers specifically designed for protecting sensitive interior components. It's important for technicians to prioritize safety and take necessary precautions to protect both themselves and the vehicle during the repair process. If you have any concerns about the safety practices observed in a particular video or repair, it's always a good idea to raise those concerns with the repair professional or shop involved.

[@vdubskiee5356]

@@xinxianshiwow all this talk about safety lol if your going to show “incredible repair techniques” show them!

[@BillMulholland1]

A lot of work. Good job 👍.. Do you know the guy who does the same thing on mechanic jacks channel?

[@xinxianshi]

@BillMulholland1 • 2 days ago Thank you for your kind words! I appreciate your support. Regarding the mechanic jacks channel, I'm not familiar with that specific channel or the person you mentioned. However, there are many skilled individuals and channels dedicated to showcasing automotive repair and restoration work. It's always interesting to discover new channels and learn from different perspectives. If you have any recommendations or if there's anything else I can assist you with, please let me know!

[@gle_Goo_Japan]

Thanks for fantastic body repair movie.❤ This repair is the same case of my damage . But here in Japan , right side of vehicle is driver side.

[@xinxianshi]

Thank you for your positive feedback and we're glad to hear that you found our body repair movie fantastic! We're sorry to hear that you've experienced similar damage to your vehicle, but we hope that our video was helpful in some way. We appreciate your comment about the driver's side being on the right in Japan and we'll keep that in mind for future videos. Thanks again for your support and have a great day!

[@carrizajosephverano3940]

Where do you get the replacement panels from? They look brand new. Like everybody else - I accept you as my car repairing Guru.

[@xinxianshi]

Hello! Thank you very much for your attention. As an after-sales service provider for a car brand, we are indeed able to obtain all required accessories directly from the manufacturer to ensure quality and fit. If you have any questions about car maintenance or other aspects, you can consult us at any time. We'd love to help you!

[@miltonhenrique2035]

Fantástico 👏👏👏

[@أبومنصورالمنتصر-ل3ع]

دائما أنتم رائعون . شكرا على إضافة الترجمة باللغة االعربية 😍

[@ryokun360]

これは車を作るより難しそうだ。凄い！

[@xinxianshi]

ありがとうございます！車の修理はとても面白い仕事だと思います。

[@ryokun360]

@@xinxianshi 日本から応援してます！

[@blackjackjjrtcoral2715]

Buena noche!!! Aqui lo que no me explico es si ya te dieron todo el costado para la reparación, porque no se la pones completa ???

[@xinxianshi]

Hola! Puede haber varias razones para no reemplazar toda la sección lateral de un vehículo durante una reparación. Algunas de las consideraciones incluyen el costo, la disponibilidad de piezas, y la extensión del daño. Si el daño está localizado en una sección específica y se puede reparar de manera segura y efectiva, a menudo se elige esta opción para reducir costos y tiempo. Además, en algunos casos, la sustitución completa de una sección puede requerir herramientas y habilidades especializadas.

[@santosfernandotinga7773]

Belíssimo trabalho. Meus parabens

[@harshabiliangady3211]

Great job Mr Han. Must say I loved the music too. God Bless keep up the good work.

[@xinxianshi]

Hi Harsha, thank you for your kind words and appreciation. Mr. Han is indeed a skilled craftsman and it's great to see his work being appreciated by people from around the world. We're glad to hear that you enjoyed the music in the video too. Thank you for your support and best wishes to you as well!

[@ramtek2702]

You have 100 years of experience in a 30 year old body. INCREDIBLE!!!

[@xinxianshi]

Thank you, @ramtek2702! Your kind words mean a lot to us. We take great pride in our work and strive to deliver the best results possible. It's our passion and dedication that allows us to achieve remarkable outcomes. We appreciate your support and encouragement. Thank you for recognizing our efforts, and we will continue to strive for excellence in all that we do.

[@humbertopaz3630]

Es un placer ver los trabajos de esta gente 👏👏👏👏

[@xinxianshi]

Me alegra que disfrutes viendo el trabajo de esta gente. La artesanía y la habilidad en diversos oficios pueden ser realmente impresionantes. Ya sea en el ámbito de la reparación de vehículos, la creación de arte, o cualquier otra disciplina, la destreza y la dedicación de los profesionales pueden ser verdaderamente inspiradoras! 👍🔧🎨

[@edgarpereiraervilha3272]

Não seria ideal decretar a perda total, executar a seguradora e vender o veículo para desmontagem, reciclagem ♻️ e outras atividades inerentes?? Tradução para o inglês, por favor!!

[@xinxianshi]

Thank you for your suggestion! When it comes to handling vehicle accidents, there are indeed different options and approaches. Each region and insurance company has its own regulations and processes. In this video, we chose to repair the vehicle and took appropriate repair measures to ensure its safety and functionality. We also respect and understand that others may choose different approaches. Thank you for watching and providing feedback!

[@joshuaanderson8508]

Working on the trade of repairing and selling salvaged vehicles. Watching your videos are a huge help! but quick question, at 8:12 what are you using to hot glue to the fender for the pull? is it just a cut up seatbelt?

[@xinxianshi]

Hello, first of all, thank you for your love for us. The problem you mentioned about the hot melt glue pulled by the seat belt is very simple. You can use anything, as long as the flat belt can stick to the glue.

[@warrenmccormackjnr4813]

im sure 192 grand should cover it

[@العلمي-ق3ت]

great piece of work. Love seeing repairs instead write offs 👍

[@xinxianshi]

Thank you for your support, glad you also like to repair rather than scrap

[@jujole9592]

You are an artist. You are the best. Congrat.

[@xinxianshi]

Thank you. I appreciate the compliment

[@AG-zj2yw]

Lo ideal sería que salvarás del carro original la mayoría de sus partes eso sería genial porque así como lo haces queda todo parchado como franquestein, AK final se ve bien pero x dentro queda en partes yo creo que pierde su resistencia y fortaleza en su estructura queda más debil

[@xinxianshi]

Gracias por su comentario.Entiendo su punto de vista， pero en este caso específico， se consideró que reemplazar esas partes era la opción más segura y efectiva para garantizar la integridad y la seguridad del vehículo.Cada situación de reparación es diferente y se toman decisiones en base a una evaluación completa de los daños.

[@larryzimmer8739]

Fantastic!!!! Incredible workmanship.

[@paladin0654]

Amazing! We here in the US are too lazy to beat panels anymore.

[@xinxianshi]

Thanks for your comment! It's always interesting to hear different perspectives from around the world.

[@larryfournier4403]

I do

[@paladin0654]

@@larryfournier4403 You're one in a million!

[@onisiforosonisiforou]

very good work , the incredible thing out of all that work , is his cloths , still like just at the end of the job came from the dry cleaners !!! well done !!

[@xinxianshi]

Thank you for your compliment,

[@onisiforosonisiforou]

@@xinxianshi you are welcome , i only said the truth !!!!!!

[@awilliams5007]

Stop the music. Just play the normal sounds of the shop

[@adolfomello5343]

parabens pela tecnica e rapidez com que foi restaurado o veiculo. Achei fantastico a disciplina do tecnico.. Parabens amei o video...

[@xinxianshi]

Muito obrigado pelo seu feedback positivo! Fico feliz em saber que você apreciou a técnica e a rapidez com que o veículo foi restaurado. Se tiver mais perguntas ou comentários, sinta-se à vontade para compartilhar

[@tprski]

2 words. Body Integrity.

[@antoniojoseestevesamorim6114]

You re the best!!!! Congrats!!!👏👏

[@xinxianshi]

Thank you so much! Your support is greatly appreciated! 👍👍

[@aibada6594]

Wow! One man saved a car!! Were doors and outer structural shells repaired or replaced with brand new parts?

[@xinxianshi]

Yes, the doors are all new. Damaged doors cannot be repaired back to their original condition, so they are usually replaced.

[@aliousow165]

Je suis mais vous ête enormement qualifier

[@luimackjohnson302]

Magnificent! Thank you for sharing this video! Now can Mechanic Han come to Port Moresby and Madang in Papua New Guinea and panel beat my three Classic Range Rovers and Two Classic Jaguar's please? I really admire his brilliant skills!

[@xinxianshi]

It's wonderful to hear that you admire Mechanic Han's skills!If you have any specific questions or need advice on finding a skilled mechanic in your area, feel free to ask. Wishing you the best of luck with the restoration of your classic vehicles! 🚗🔧😊

[@aprianto1985]

Work hard to repair the broken car. I am so impressed with final work result

[@xinxianshi]

Thank you for your comment, FNU Aprianto! We strive to do our best in every repair job we undertake and we are glad that you are impressed with the final result.

[@jesusbarrerotrujillo8182]

Hola, Buen trabajo muy limpio es de profesionales....gracias por compartir...saludos desde España.

[@xinxianshi]

¡Hola! Muchas gracias por tu comentario. Sí, este trabajo de reparación ha sido realizado con gran habilidad y profesionalismo. El equipo ha hecho un trabajo limpio y minucioso para devolver el vehículo a su mejor estado. Es genial que te haya gustado y apreciado el esfuerzo que han puesto en ello. ¡Saludos desde España y gracias por seguir el canal!

[@iandibley8032]

Well done, a fantastic repair, a very talented panel beater.a repair of this type wouldn't get done in Australia. Labour costs are too high, and many younger panel beaters no longer have the skills needed to attempt this type of repair.

[@xinxianshi]

Thank you for your comment. Indeed, this repair demonstrates the skill and talent of the panel beater involved. The cost of labor can vary across different countries, and it's true that higher labor costs in some regions may make extensive repairs less common. Additionally, as the industry evolves, there may be a shift in the skills and expertise of younger panel beaters, which could impact the availability of such repairs. However, it's important to note that there are still skilled professionals in various countries who can successfully undertake complex repairs like this. The availability and feasibility of repairs can vary based on factors such as market demand, regulations, and individual preferences.

[@diegofernandez-lomanalopez5378]

Great job. Wich kind of glue do you use in the safety belt?

[@xinxianshi]

Hello, thank you for your message. The seat belt is glued with high viscosity hot melt adhesive.

[@louisebrown2887]

You can tell he takes pride in his work

[@xinxianshi]

Hello. For similar accident repairs, it is necessary to conduct an evaluation before repairing, and only make a decision after calculating the approximate cost. The repair cost of this car is approximately US$10,000.

[@daveanderson401]

superb work carried out, made to look easy

[@Raaj_2528]

Great Job and superb skills❤

[@xinxianshi]

Thank you for your generous compliment! I'm glad you appreciate the work and skills involved. If you have any questions or if there's anything else you'd like to see or know, feel free to let me know! ❤️

[@giannicandela3638]

Ottimo lavoro, bravissimo,, saluti dalla italia

[@xinxianshi]

Grazie mille! Sono contento che tu abbia apprezzato il lavoro. Se hai domande o hai bisogno di ulteriori informazioni, non esitare a chiedere! Saluti dall'Italia!

[@curtgomes]

Incredible piece of workmanship.....

[@jonathanklopf7581]

love watching a craftsman work.

[@NormanJaquemotRebel]

First thing I noticed, Han, is you have no work table to cut your parts. You can always do that while you're young, but with time, you'll need to be more comfortable to get the work done. I see that you wear eye protection now, which is a good thing. Other than that, you're giving me great ideas on how to get things done on my 2003 Escape ( entire bach end to check and rebuild upper wheel wells contour and dog legs on both sides. Thanks for showing me the basics of restoration. And at 15:16, when you weld, PLEASE wear eye protection. You won't find it funny if you get a flash, or if a spark hits one of your eyes. REMEMBER, you cannot change them like you do for car parts. You only have one set...😊😊

[@xinxianshi]

Thank you for your thoughtful observations and reminders! Safety is indeed paramount, especially when working with tools and equipment that can pose risks to our health, such as welding.