INSTALLING A 6.4 HEMI TRUCK INTAKE MANIFOLD on a 5.7 Ram 1500!!(AMAZING RESULTS)

Incredible Hemi Merchandise:
teespring.com/...
PLEASE SUBSCRIBE IF YOU WANT THE BEST RAM CONTENT ON KZbin!!!
Follow me on Instagram @Incredible_Hemi_
Hit up Guage Performance for all your Hemi needs:
www.gaugeperfo...
ELITE HEMI PERFORMANCE
[e-mail]
Subscribe to StangMode:
/ @stangmode
Hit up Greene Racing for the BEST tuning:
/ greeneracing.tuning
Cameras used:
Samsung Galaxy s10
GoPro Hero7 Silver

[@josuevillanueva3016]

I really wish the Ram 1500 just came with a 6.4 straight from the factory.

[@IncredibleHemi1111]

That would be awesome maybe soon

[@TheXOoftheRO]

Exactly. Rebel Tricerotops 4x4 1500 package with TRX rear end, + TRX lift springs and shocks, (basic big horn interior group with Power Wagon drivetrain. (Retaining 2wD mode)

[@yodawg3469]

GM and Ford both put the bigger engines in their half tons

[@toofastnobrakes]

Josue Villanueva then they need to drop a 7.0 or a 7.2 hemi in the 2500 👍💪

[@darrellsyrnyk6875]

Personally I'd be interested instroke the 5.7 to a 400 then supercharger to my 2014 Ram 1500 !! More hp then that 6.4 !! Lol

[@jonathanshaffer9421]

Hey brother i know this is an older video, but im interested in doing the 6.4 manifold swap and i also want to run a catch can. What was the end result with your catch can set up brother?💯

[@heavymetalcowboy5359]

I really wish folks would do a pre and post dyno run to gauge the effectiveness of these mods. That's the only way to show if the change is worth it. This comment is NOT just aimed at this channel, but ALL channels that claim increases from mods.

[@brandonbarnes8997]

kzbin.infoR6fm-DS4M6c?feature=share

[@venomhemi3914]

Sounds freaking sweet I'm jealous. I hope I can get a 6.4 intake installed on my car someday. Dude I literally can't wait to see your new times at the track good luck brother!!!

[@IncredibleHemi1111]

Thanx man it should rip once we get it all dialed in

[@venomhemi3914]

@@IncredibleHemi1111 does does Steve have his own shop? I tried to research it I was going to get a couple things done, do you have a number or an address? Please and thank you

[@BoostedF150]

Good use of the time, can’t wait to see her back at the track

[@IncredibleHemi1111]

Thanx bro I got a more stuff coming but ill have time to dial it all in

[@rammzilla3340]

Thanks for doing this video Nick and having your Mechanic Steve do it as you already know I just bought a 6.4 intake manifold and I also bought it on eBay well hopefully you get more power out of it and the results you are looking for 👍keep them videos coming!!!!!!!

[@IncredibleHemi1111]

Thanks , yea hopefully I can pick up a good gain within ill know when I send jay the logs

[@mitchpehl799]

@@IncredibleHemi1111 Hey there Sir appreciate your video as well cleared a lot of things up on my install. What did you torque the intake manifold bolts to?

[@rt_life8478]

Man honestly i love people like steve i know 4 of them they are chill asf and iknow their stuff

[@darrellsyrnyk6875]

So that 6.4 manifold bolts right up to the 5.7 ?? That's sweet.

[@IncredibleHemi1111]

Yupp

[@vote4thavillain5.76]

I need find one for different vehicle

[@trapaholic4133]

@@IncredibleHemi1111 I have a 05 hemi 5.7 would any year 6.4 manifold fit mine?

[@Hoesph52221]

@@IncredibleHemi1111 what about my CAI does it got to be a 6.4 CAI?

[@victoradan1144]

​@trapaholic4133 did you find out? mines an 05 too!

[@ram4life]

cant wait for that 5.7 ported intake!

[@IncredibleHemi1111]

Hell yeah, ill be shipping Monday

[@jmata4506]

It’s a good install. Installed my ported 392 manifold about 2-3 months ago and once Jay dialed it in, i could feel it hit harder over the super rich base tune. Took about 5 revisions, but he worked his magic! I’d say those numbers area little overblown based off so many other videos of this mod posted, but time will tell.

[@IncredibleHemi1111]

This is the first video of the truck 6.4 manifold for the ram, the 392 car manifolds on the 5.7 cars are completely different setup gains are not as much as us ram guys get

[@jmata4506]

Incredible Hemi, Torque I can for sure see, HP not so much. Yes, you are flowing more air, but you aren’t flowing that much more air to produce a 30 HP gain up to or anywhere throughout the band. Just saying it’s going to be hard to put numbers on it without having numbers or times from previous setup up to this one.

[@magma5.o_h191]

@@jmata4506 how many rams have you swapped the 6.4 intake on? I'll wait. Those numbers are pretty common.

[@jmata4506]

Ohio 5pt7 Then I’m sure you have a plethora of sources and data to share. Video Or forum link where it’s documented will do. Don’t get offensive bro, just stating not calling @incredible Hemi a liar.

[@racemaniac8682]

I knew you couldn't end the vid without giving us some exhaust cam choppity chop action lol

[@IncredibleHemi1111]

Haha of course

[@JoseRodriguez-mp1bl]

Thanks Brother I have a 5.7 1500 Classic Quad Cab and I’m getting it going. I have a ported fastman TB, AFE Momentum GT Cold Air Intake, Stainleass works Headers w/ High Flow Cats, Stainless Works S-Tube Mufflers w/X-Pipe, and HP Tuners MPVI2. This is what I’m getting next and I’ll have it all installed. I’m gonna have Jay Green Tune my 5.7 I’m just unsure on the Fidanza Aluminum Flywheel and the Pulleys......?? But thanks for the video!

[@bryancooper8201]

Just did this mod yesterday. Thanks to the info on the hose connections this made everything a lot easier. Wish there was instruction for more in-depth installation as I didn’t know going into this that some of the brackets would not be reused. Your video helped with that so thank you.

[@forestfingerboarder]

any extra tips you could give me, ordering mine soon

[@bryancooper8201]

@@forestfingerboarder make sure to order a Takayama Harnesses. This will make it plug and play for the rear cables this way you don’t have to cut factory wires like I had to. You can order this harness with the intake from moes performance. Also watch the 1auto video for disassembly but unlike their video you don’t need to remove the alternator or belt. I went with the 5.7 extensions for my fuel injectors instead of using the 6.4 fuel injectors. Make sure your Pcv valve in the back that comes with the new intake with fit your electrical plug, mine didn’t and I had to use old one and had to use deemed to get old pcv valve in position not a show stopper though.

[@vicer77]

@@bryancooper8201 how much of a difference did you notice and what other mods did you have or have?

[@bryancooper8201]

@@vicer77 it wasn’t a crazy amount of difference but shorty after I got long tube headers, removed the clutch fan and changed my thermostat to the 180 degree but what helped with these the most was the tune. Now just waiting to install a cam to capitalize on the other things in vehicle.

[@vicer77]

@@bryancooper8201 so it sounds like you got that first. I have everything you mentioned with the exception of the cam . I also have SOS coils which made a surprisingly noticable difference. I plan on getting the manifold with throttle body so I hope that makes a big difference.

[@durzolife]

After installing the 6.4 manifold did you notice any daily economy gains? Just wondering with all that gain being down low if it helped the truck haul itself around town better haha.

[@pee-jaysram1879]

30 whp & 30ftlb... bolt on... that's a great bolt on... next on the list for winter 2020/21

[@IncredibleHemi1111]

Yea its a great mod for these 5.7 rams

[@kevinmonseler3592]

Hello from Canada Nick! Another great video, and can not wait to see the improvement the intake will make!!

[@josephpatti8274]

thanks for the video seems like there isn't alot of in depth truck videos. just bought the mmx 6.4 for the 5.7 with full headers back cant wait

[@robertbenson8277]

If you are running a 4x4 , wouldn’t you have better launches racing in 4x4 ? Isn’t any truck quicker in 4x4 versus 2x4? Third , do you only replace the rear transaxle ? Is your truck able to use 4x4 at all ?

[@IncredibleHemi1111]

I run 4x2 , its not difference in et in either ive ran both same day in back to back runs, n 4wd is 100% usable i still have same 3.21 gears up front n rear

[@robertbenson8277]

Incredible Hemi thanks for the response . Keep doing what you do , us Ram guys learn a lot from you . Thanks

[@reaganhughes169]

Could you do a quick video on where you got the manifold, what all you need for the swap, and prices etc?

[@pdawgproductions9610]

Don’t know where to get my hands on a 6.4 manifold either ? This would help

[@elliottpence6703]

Love your content! I have a new body style 1500 quad cab 4x4 didn't know the route I wanted to go when I got it but now thanks to your videos I do! I don't think I'll do much more than bolt ons at this point but for now I'm going to try and go 13s once the track opens up, not sure what it will do being stockish for now but if you have any tips or tricks on how to get there I would love to hear them! Keep the great content coming!

[@Sak-zo1ui]

Look at how pretty those heads are!

[@IncredibleHemi1111]

Yea there nice

[@denalidriven1574]

I'm doing the MSD intake manifold for my 6.2 denali 18 then 90 mm throttle body from bbk

[@sonsofliberty3081]

The truck 392 is completely forged the whole way through, including the crank. No one else builds their motor that heavy. If they put that motor in the 1500, it really wouldn't do much good for performance. You'd be better off doing this to a 345ci. Plus cam, long tubes, and a tune, you could climb the hp pretty quick.

[@jasonlopez1542]

Damn that intake looks monstrous

[@IncredibleHemi1111]

Yea its bigger, much better airflow

[@jacobtapia9269]

Incredible Hemi what you think about the vararam intake bro

[@alconk7129]

What happened to the oil catch can at the end? Saw it was gone and you had a filter in place.

[@JimmyFWright]

Saw that too. @incrediblehemi what's the word? Or was this a split edit from the demon can install??

[@elifernandez3769]

So is it not worth porting the stock 6.4 truck intake manifold? I just see the option to do it on Moes and MMX websites. Would it gain more power and torque I'd you did that? Or is it not worth the $350 dollars they're charging to do it?

[@IncredibleHemi1111]

Probably not worth it for $350, I might be porting it in the future i wanna see the gains with in unported first

[@elifernandez3769]

@@IncredibleHemi1111 I got ya! I just ordered a cam kit for my truck!! Unfortunately parts are on back order and its gonna be early May before I get the whole kit delivered.. I've been wanting to do a supercharger but I may keep it NA since this is my only truck. I wanna buy a single cab and go all out on it.

[@amermuscle]

Can u put link in description for all the stuff u needed to buy to make this intake work?

[@IncredibleHemi1111]

Moes performance and MMX sells the whole kit and everything you need when u buy it

[@triple_threat_lightz]

amermuscle I was asking the same lol 😂

[@IamChucky_]

Is a 6.4 cold air intake needed with the 6.4 manifold? I see that it’s offered as an option when purchasing the 6.4 manifold from either moes or mmx

[@Mrhandyhitman]

I’m sure if you want the full gains you will have too

[@charleslincoln7497]

Down graded from 2020 to 18 to save money so I may be doing this 😂 🙏🏽

[@charleslincoln7497]

Would be fun but I may just go with the shorties and a cat back

[@heavymetalcowboy5359]

BTW - I really like this channel, and truly appreciate what you do here. Thanks!

[@08s197]

Another good video and mod.

[@IncredibleHemi1111]

Thanx bro

[@alphonso47]

I have a 2012 ram 1500 my 6.4 intake came off a newer ram truck after installing it i got a bunch of codes now tractiion control light on deactivation #7 cylinder #7 injector open circuit battery light flashing any ideas where i went wrong o and it doesn't shift to 5th gear smh

[@DL101ca]

Did you use the 6.4 injectors or kept your 5.7 with a spacer ? The 6.4 injectors need custom tuning for use in the 5.7, it sounds like you might have other issues as well .

[@jozaylinan6056]

Niceee Uprgade 👌🏼 but those but connectors are huge pet peave for me i wouldve gone with sodering the wires for no future wiring issues 🙄

[@IncredibleHemi1111]

True a couple guys I know soldered them but it doesn't bother me too much

[@jozaylinan6056]

@incredible hemi would love too see a hellcat ported throttle body along with the 6.4 intake to maximize airflow 😨

[@JimmyFWright]

I'm surprised no one makes an extension harness for this mod.

[@steves8355]

Dude I love your channel and info. That truck is beast hell of a job. I got a 6.4 intake manifold. Do you happen to know the part # for the egr block off adapter by MMX? I can't find it. Thanks man. Good shot. Keep it up.

[@hostilehemi9740]

No MSD kit for the active runners? Is this an older setup with VVT or did you just disable the active runners on the 6.4 intake for now?

[@IncredibleHemi1111]

Do not need an MSD kit its only needed for the car to upgrade to the 392 manifold

[@samsonreynolds3728]

Steven Downing all newer ram 5.7’s have active runners

[@Jr1987Gt]

@@IncredibleHemi1111 Will I need a SRV control module like MSD or Z Automotive for a 2014 Ram Rt? I'm confused always thought you need it to take full advantage of this manifold. 🤔

[@DL101ca]

​@@Jr1987Gt Ram trucks already have an SRV module to control the runners.

[@triple_threat_lightz]

Other than a tune, can you list parts ant their oem part numbers for ,e so can order them I been asking around for this mod for months n no one could tell me parts at first I asked jay a while back like a year ago n he didn't know exactly what would be involved cuz no one had done it back then yet lol, but now I keep seeing more of this 6.4 swap more often

[@IncredibleHemi1111]

U can order everything u need off of moes performance or MMX there kits come with everything needed

[@triple_threat_lightz]

Incredible Hemi yea I just seen all your comments after I posted lol 😂 thnkx

[@user-wf5lb8ey8h]

I have a 2011 Ram 1500. I'm trying to do the same thing to swap out the manifold. Do you know what year charger? I need to get this 6.4 manifold out of?

[@luisportillo7427]

You can get it from mmx or any 2014/2018 ram 2500 hemi 6.4 for ram trucks, and for chargers I would say the 392 or the srt8

[@yoelhuge4885]

do you know if it fits a ram 1500 with 5gen hemi? does hemi 6.4 maniflod from any year fit well? do you recommend buying it used?

[@DL101ca]

There's no 5th generation hemi, it's 3gen hemi engine and 5th gen Ram body. Yes they will fit, engines are identical as long as they are 3rd gen hemi.

[@RizeTwist388]

Would this work on an 08 1500? Lmk im wanting to build my truck currently just running a Diablo sport tune.

[@steves8355]

Did you use the stock 5.7 map sensor? I just finished and loaded the tune. Says map sensor is messed up. Thx

[@IncredibleHemi1111]

Yes i reused stock

[@steves8355]

@@IncredibleHemi1111 Did you get a check engine light on for a runner selector low voltage?

[@frivera735]

What if you have a 6.4 manifold off a car can I get the mds for the long runners to work ? Or do I need a truck 6.4 ?

[@abrahammartinez8838]

What injectors are you running bro I’m thinking of getting the same manifold with hell cat injectors to go on e85 I heard I have to get tuned

[@bri-manhunter2654]

Anytime you do anything you need to ahead and tune for it.

[@outroaming1003]

Who taught this guy how to extend wires, crimp connectors are a weak fix. Solder and heat shrink would be the correct way to extend those wires.

[@DL101ca]

It's only for the srv actuator, not your airbag...if it ever malfunctioned it wouldn't be a big deal.

[@erickmaldonado5430]

Wheres the throttle body Im planning in buying the 6.2 manifold from modermuscel. Just not sure if i should upgrade my throttle body

[@edwardmartino9068]

Are you used the same spark plugs? Or the 6.4 needs a different ones?

[@MartinRamirez-or2nm]

I really need help I just did this swap with a ported 6.4 manifold and 90mm tb also ported. Once I turn on the truck it make something at service electric control throttle body, would that be bc it’s not tune yet or did I do something wrong? If you can answer me I’ll highly appreciate

[@MartinRamirez-or2nm]

It marks something about *

[@DL101ca]

What type a throttle body are you using ? Aftermarket ones very often have issues.

[@A1pha911]

What oil catch can do you have can you add a link. Your videos are awesome man and very helpful.

[@jozaylinan6056]

How would a pro charger stack up with your current Cam ? Since you gain alot of top end power and a centrifigul supercharger optimizes top end horsepower 😬 would go great with all your current mods 🤯

[@IncredibleHemi1111]

If your doing just a procharher id win easily. If u add most n a custom tune it'll get closer

[@harrisonboys3744]

Can u use your stock throttlebody? On the 6.4 also do u feel the 6.4 is better ported then just porting the 5.7?

[@DL101ca]

Yes you can use the stock throttle body, the 6.4 uses the same as 5.7 , as for the porting it will depend on the other supporting mods you have done to the engine.

[@austinblakney939]

Hey I just have a couple questions...so what cam do u have and what other internal parts did u start off with...I seen you did the 6.4 manifold and a cam with tune and cold air intake. Is that all you started with

[@jameshooper5033]

Good thing it’s plastic and not like the old days cast iron.

[@rigweldernomad932]

How did that oil catch can do for ya?

[@billdeere5042]

is there not a connector from the 5.7 EGR ? what did you do with that ? it doesn't trip a trouble code ?

[@jeepsinaus]

Hey mate.How easy was it to get the truck Intake manifold complete. Expensive? Salvage yard? Cheers. Great video.

[@drmitofit2673]

If I did this and ever needed a warranty claim, I could just say, "Hey, it came that way!" Ha ha ha!

[@snach1983]

I think its a great idea that speed freaks would do

[@shawndever231]

Hey brother I'm having trouble hooking mine up. Could you possibly give me the information of how you tied in the vacuum hoses and brake booster? I'd really appreciate it. I've been wrestling with it for a couple of days now and ready to hit the road but she keeps dying on me

[@livinlifefl411]

This will definately be next. 😈

[@IncredibleHemi1111]

Hell yeah this is a great upgrade for us ram guys

[@robborges2160]

Hey bud. Thanks for your video. I am in a different situaltion than you. I am replacing a 5.7l with a 7.0l (6.4l) on my 2012 2500. It's also procharged. I hear you mentioning the victor in your video..... i actually own couple of these intakes but not sure I can use them in my truck. The throttle body comes straight out like on the cars rather than 90 degrees like the 5.7l intake on rhe trucks and interferes with the alternator. Thanks to your video it at least looks like I can at least put a 6.4l truck intake with rhe offset throttle body without too many issues.... have you looked into the victor setup dor yourself yet? Modern Muscle sells a relocation kit for the alternator and ac, designed to use the mopar 6.1L intake, but I am unsure if this will also work to mount the edelbrock..... my guess is yes, but I haven't spoke to anyobe else who has tried yet.

[@darioavendano369]

On exactly what truck would that intake manifold be in I thought the 6.4 was a diesal

[@cammedramprocharged4927]

Dude 👌 so happy for you, so if I get the victor II do I need to change my torque converter and if you explain why

[@IncredibleHemi1111]

Yes definitely need a bigger converter and possibly higher gears for the victor 2 , it will make more power at the top then for 6.4 , i possibly could have benefitted more with it but don't wanna take the chance of possibly loosing more the 6.4 is a tq monster with great top end also

[@cammedramprocharged4927]

Incredible Hemi what if I do not do a torque converter ? If I get a torque converter what kind do I need

[@cammedramprocharged4927]

Incredible Hemi which and where would you get a converter

[@samsonreynolds3728]

I ordered mine from mmx a few days ago ported, I’m excited. Not sure what to do for an intake. I want to see if I can route it to my 5.7 s&b box.

[@IncredibleHemi1111]

U might need to do some customization but I believe u could still make it work

[@forestfingerboarder]

did it work for you/how did you do it? I'm in the same boat

[@BigHen36]

Nice! Why the 6.4 manifold over a ported 5.7 manifold?

[@Chriskelly19067]

I believe he had both but he's pushing more air than 5.7 can handle now.

[@IncredibleHemi1111]

Had the ported 5.7 did great but need more airflow to maximize my new setup

[@BigHen36]

@@IncredibleHemi1111 Makes since, especially with the bigger cam.

[@noahtwyman6338]

So for the 6.4 intake manifold on the 5.7 do you have to get an actuator for the active runners?? Or can you just install the manifold without touching the active runners and when they come on?

[@AestheticChino]

If it was a car yea rams have it already

[@JuanMendoza-uf2ln]

so im being told i wont get any gains doing an intake manifold swap/bigger TB unless i add Boost??

[@drmitofit2673]

6:45 Oddly satifying!

[@mikewest5529]

When will you hit the dyno? Ohhh on your way to the 11.47 pass I said I while ago!! Great job!!

[@IncredibleHemi1111]

I have no idea what I'll run but don't worry we are not done yet 😉

[@mikewest5529]

Incredible Hemi Hell yeah brother!! A little spray? Or switching to meth?

[@joshuaperez5321]

11.9

[@stevegesell7433]

Did you use your factory throttle body or the 6.4 throttle body? Hear people say this swap works well for low end torque did you find this to be true? Also I’m looking at doing this on my pickup for towing trailer purposes is it suitable for that?

[@IncredibleHemi1111]

I had a true bore throttle body I used, the 6.4 n 5.7 uses the same throttle body

[@steves8355]

Love the channel. Excellent videos. Does the 5.7 SRV need to go on the 6.4.? I found a salvaged 6.4 that came with nothing for cheap.

[@IncredibleHemi1111]

Yea need to extend the wires n get an block off plate for the egr

[@jasonaikens9735]

Incredible hemi what numbers are u pulling on dyno? U have cam,tune, intake,anything else?

[@cat5tracker581]

Did you use the 5.7l TB on the 6.4L manifold or did you get a new one? Thanks

[@richardparker294]

What I need to know, will the 6.4 fit on the 2005 5.7? Also what are the differences in power gains?

[@IncredibleHemi1111]

No its for a vvt. Won't fit on yours from my knowledge

[@vmaster4406]

6.1 will

[@HOW-TO305]

I suggest you get a vented hood to have the engine running cooler

[@TheXOoftheRO]

Awesome video. Are you using factory spark plugs? In the past too?

[@IncredibleHemi1111]

I changed them when I did the new cam I used ngk 4469

[@TheXOoftheRO]

@@IncredibleHemi1111 thanks mon 😁

[@bigharryyy03]

Other than the manifold (which results in the higher horsepower and torque), what is the difference between the 5.7 and 6.4 Hemis? Like if I were to make this mod to my 5.7, would I technically have a 6.4? I’m new to this so I apologize for my lack of knowledge on the subject.

[@wadeerstad1018]

6.4 liter hemi has more cylinder displacement than the 5.7 hemi. Increasing piston diameter and Poston stroke will increase displacement, which is not cheap to do.

[@DL101ca]

You would need the 392 badges and you're done.😜

[@johndarseyiv1717]

What did it do to your mpg??? Asking bc mines a daily driver

[@kylethomas3434]

Can you do this to the 3rd gen dodges I have a late model 3rd gen 5.7.

[@IncredibleHemi1111]

No this is only for 4th Gens, I don't know much about what would work best with the 3rd gens

[@kylethomas3434]

@@IncredibleHemi1111 alright thanks bud.

[@r-shot8431]

Glad your liking that 6.4 - awesome, she is going to be ready for the track! How was the drive immediately after words... (MILES of SMILES i know) 😃😊😊

[@IncredibleHemi1111]

Top end I feel it. Me n jay are still dialing in the tune I like it I just hope it helps like its supposed to at the track

[@TRexx47]

They go for 700-900 bucks used at that point just buy aftermarket

[@cory0702]

Are you getting it tuned now

[@IncredibleHemi1111]

Yea we are already in the process of getting it dialed in

[@cory0702]

Cool I have a great tuner if you need one

[@samsonreynolds3728]

Need some pull video/impressions

[@IncredibleHemi1111]

I will once I get it dialed in

[@johnsmith-qz4bv]

sounds awesome

[@ulicsc.5103]

You have a very nice tick right there.

[@hubertfruzia1803]

How did your fule use

[@racemaniac8682]

Low low 11s coming soon I do believe

[@IncredibleHemi1111]

We will see

[@Mr.NEStalgia]

How big is the opening on the 5.7 intake manifold ? And is the 6.4 the same size opening ?

[@DL101ca]

Yes.

[@inktheghost]

Think it fit the 5.7 Etorque 2021

[@mrbigbuds1745]

WHAT PARTS WOULD I NEED FOR A 2008 HEMI 5.7 RAM

[@craig_sez8534]

Very nice....Have you ever done a list of your engine mods and compared stock hp/tq to what it is today?? Or are you basically keepin mods on the d/l....

[@IncredibleHemi1111]

I've done a couple videos on it just might need an updated one

[@craig_sez8534]

@@IncredibleHemi1111 Well guess im a bad subscriber and didnt see those...Mostly courious as to the mod list and gains from each..

[@jerrym6587]

QUESTION !! Did you use the 5.7 og throttle body on the new 6.4?

[@IncredibleHemi1111]

The 5.7 n 6.4 use the same throttle body

[@r0b3rt490]

Where can I get a ported 5.7 intake

[@IncredibleHemi1111]

Mmx sells them

[@r0b3rt490]

@@IncredibleHemi1111 would I need to get a tune/chip

[@IncredibleHemi1111]

No they will direct bolt on but will be better with one

[@birdman8301]

was that 20 HP gained from the intake and injectors?

[@roberthammond4642]

How much was the tune?

[@patricksnyder3446]

How many problems occur over time when u put different tunes in your system? I have heard Mopar is not very easy to work with

[@IncredibleHemi1111]

That's completely wrong I've but multiple tunes on per day n been doing that for years no issues

[@patricksnyder3446]

@@IncredibleHemi1111 are all your tunes from j green

[@IncredibleHemi1111]

@@patricksnyder3446 absolutely

[@darioavendano369]

What is the best manifold for a 2012 ram hemi 5.7 because ive seen people do the 397 or a 6.4 but i see that holley has some also and a few other brands what is the absolute best for numbers one for horsepower and another for torke

[@darioavendano369]

And what cold air goes with it and throttle boddy which is the best

[@IncredibleHemi1111]

For NA these 6.4 manifolds are putting up the best numbers

[@darioavendano369]

Incredible Hemi thank you what about a throttle body to go with it?

[@ChrisWilliams-lt8lq]

Did you have the cam before the manifold?

[@kendricksimpson3281]

Nice bro nice. Can I put a 5.7 manifold on a 4.7 v8?

[@playboykgballin2688]

Look up airram performance for 4.7 info. Good mods for that engine

[@IncredibleHemi1111]

No idea bro look into what the guy other guy said

[@kendricksimpson3281]

Incredible Hemi ok

[@owenfish4123]

How much flywheel horsepower do you think you have with this set up

[@IncredibleHemi1111]

Not not 550ish+ maybe 🤷‍♂️

[@owenfish4123]

@@IncredibleHemi1111 She sounds awesome. That cam really sounds off

[@bri-manhunter2654]

Incredible Hemi. Honestly I would say your probably closer to 500+

[@cmmd_m4340]

did that catch can work? catched any oil?

[@AK-rp2lg]

Is a tune required afterward or just swap and go?