Incredibly Easy! Galaxy Z Fold 6 Spigen Tempered Glass Screen Protector Installation and Review

[@paulstrumberger5337]

It's the best screen protector that i found, and super easy to install. I've had this on all of my folds do far.

[@CF542]

Initially, I ordered the plastic film ones from Samsung for the Z-Fold 6 and while those are a mixed bag, so far they installed well and still looks good. The best feature is that they are anti-reflective. When comes time to replace them, I am always a fan of Spigen's screen kits. Always had good luck with those.

[@MrPrestonmale68]

Are they actually really anti reflective? In youtube videos o watched it looked still pretty reflective to me.

[@CF542]

@@MrPrestonmale68 Yes, the Samsung ones do reduce glare fairly well and don't collect fingerprints like the old ones did

[@Just.Here.For.Comments]

I installed this one last week as well and have been really impressed with it. It doesn't seem to smudge as much as others I've used.

[@Just.Here.For.Comments]

Took it off the other day because I am currently using a Latercase. Does not fit with the case because tolerances are too tight (that's a good thing).

[@rdszone5069]

I have installed it n it feels gr8 ,easy installation too❤

[@LornithorynqueArchitecte]

i bought it too the day i bought my fold 6 and i was really shocked by how simple it is to fit the tempered glass on the screen, before when i did it by myself, i never was able to have 0 bubbles under it.

[@KingHenry-k3c]

Myself am installed this extremely good easy clean dust and fingerprint resistance ❤

[@nightshade427]

i have matte screen protectors on outside and inside screen, makes the fold sooo much more usable, no glare from any angle, reminds me of the tcl nextpaper

[@PastorVShaw]

Which matte protectors did you get?

[@nightshade427]

on Amazon, diacube fold 6 matte screen protectors

[@saleen12]

This thing is a beast. It was so easy and is perfect so far with no case. Brother you need a break before you get burnt out lol

[@shanecraigtech]

This is what I do lol

[@ChrisMiranda-zm1rw]

I just ordered this as well after watching your video! Same set up but I got the Latercase version rather than then the Thinborne.

[@iZacq]

3:00 I don't like Narrow gap border showing,

[@volcalstone]

That's to make it case friendly. If it went right to the edges and you place a case on there it will lift up that glass possibly due to the pressure from it. To me just as long as it covers the display area and provides at least a 1mm buffer preferably I'm good with that. Now if you don't use a front case then I could see it bothering you as it would for me. I don't think there is any edge to edge glass screen protectors out there tho.

[@tristand1243]

does this fit with the latercase?

[@PastorVShaw]

Looking for anti-glare for both the main screen and a hardened anti-glare protector for the cover display. For protective hardness, 9H < 9 < Sapphire. To not blacken or colorize with polarized glasses would be a win too. The Oneplus Open did this fairly well out of the box.

[@MrJpd3]

Do you need anything for the inside big screen? I think the out side looks great thanks for that. But I have seen another video where he takes off the inner screen cover. What about the big screen do we need to worry about that one, and cleaning it also.

[@MrJpd3]

Also I am changing from iPhone to the z fold 6 can you tell me is it ok to transfer at setup from iPhone to z fold or a fresh install? Thank you.

[@johnnykeener3727]

Good to have options, ty.

[@TheComputerm746]

Thanks shane def will buy this for my zfold 6 and support you via your affiliation link keep on rocking my friend

[@shanecraigtech]

I appreciate it

[@TheComputerm746]

@@shanecraigtech no problem :)

[@bggruyeras]

Hi may I know what case are you using?

[@shanecraigtech]

kzbin.info/www/bejne/mKqQg4tvasiVpKc

[@stevem4416]

Just ordered using your link.

[@shanecraigtech]

Thanks!

[@davidnewton5879]

Must admit, always use Spigen and always get good result. Definitely worth getting.

[@AllBackEmergency]

First time I didn't have to use the second one or lift it and go in with the dust sticker. Used a ringke while waiting for the spigen and I HATE the camera cutout on most. Spigen for the win! If only their cases were magsafe...

[@syko846]

Going to get this, i bought the ringke one and the camera cutout bugs me lol also it leaves way to big of a border around the edge.

[@Waleed-el5zu]

Does it fit samsung spen case?

[@JBentham1523]

Easiest install ive done and im a maniac if there is a single dust stuck inside ill do it 10 times afain if i have to. First one was perfect

[@shanecraigtech]

Same

[@scarxxamv]

how do you remove the black screen protector that came with the phone on the front screen it seems gloued to mine

[@natjes6017]

Very nice! Does spigen do the same for Pixels? As in the coming Fold 2 😁

[@HuffmasterFLEXX]

I’ve never used screen protectors on my phones mainly because of the annoying installati process and bad results on the screens. But this looks indeed as something I might want to try out just so I’m able to easily lay the phone face down on a surface as I’m also never using any cases…😅 One question: I had to get a replacement for my first 6 as it had a faulty screen protector on it. The second unit unfortunately doesn’t open fully flat. I get it close to 180 with a little push or while just using it open. In addition the 2 halves are not fully in line/flush when the phone is closed or opened. It’s just a little bit of (not even a millimeter). My Z Fold 5 didn’t have this issue 😢. Samsung has statements on their website that there are tolerances for these 2 cases (flat and flush). The rest of the phone is fine. I’m a bit annoyed that my OCD will kill me. Maybe I should try a 3rd one… Does yours open fully 180 and the halves are flush? How about other peoples devices?

[@volcalstone]

I would and I don't have major OCD. It's an expensive device so imo it needs to be near perfect. My Z Fold 6 is perfectly fine fortunately. Good luck man. I know how it is not being able to fold your phone flat as I have the Pixel Fold as well.

[@HuffmasterFLEXX]

@@volcalstone That's also my thinking. But there are so many possible issues 😅😭. The Protector, the buttons, the screen, the hinge, the cameras... In the past I was always able to find something off with the devices I owned. Didn't matter if Samsung, Apple, Google, Sony or one of the Chinese OEMs. In the end they are all mass products and for foldables it seems like even more of a lottery.

[@volcalstone]

@@HuffmasterFLEXX yeah there is always a chance with everything. Maybe 3rd time is the charm? 😉

[@antnyc777]

Very nice but I want a edge to edge screen protector as I rock my Zfold 6 naked

[@AlGggeee]

I ordered the spigen screen protectors and the torras case. But I wonder if they are compatible.

[@Marty5.0]

were they compatible?

[@AlGggeee]

@@Marty5.0 nope. Case lifts the glass on the corners

[@AlGggeee]

@@Marty5.0 they weren't compatible

[@antnyc777]

Nice but I want edge to edge coverage

[@Joe_wright]

Is it still working good with that case? I had another tempered glass that look like it went on good and then a few hours later the bottom right corner started popping up from the case. If it's not having any issues I'll be happy to purchase this one but I want to make sure I'm not going to be wasting my money.

[@shanecraigtech]

I've had no issues, but the tolerances are very tight. There's definitely not a lot of room of error and some cases for these foldables end up loose on the front.

[@Joe_wright]

@@shanecraigtech okay... I have the exact case that you have in the video so that's why I was trying to make sure it would still work a few days later. Thanks.

[@ChristopherRosales-v9b]

Does the front screen of fold 6 has a screen protector already that needs to be peeled off before installing this tempered glass?

[@robertspeer665]

In America the packaging screen protectors were almost a black felt that you remove off the screens when you first open it

[@Mark-ns3jo]

These screen protectors are amazing. Used one for the S23+, and I have never had one that perfect before. However, Spigen have their 'alignmaster' for the Pixel 8 and 8 Pro, and those are pretty terrible. I hope they do these ones for the Pixel 9 Pro Fold like they did for the first fold because I too HATE putting on screen protectors.

[@volcalstone]

I got something similar to this but from anither company. It was super easy as well. I prefer a full coverage screen protector covering fhe camera lense as well. Those cutouts even a half ones are annoying and super dust magnets. Also I'm not sure where the light sensor is on the Z Fold 6.

[@hugocruz2380]

There's a anti reflection screen protector by Samsung I got mine at Best buy

[@chideramolokwu9558]

Very nice

[@TonyStark-yj6iv]

Does the z fold 6 have ip48

[@falcon2898]

Yes it dos

[@lemuelcubase]

I will never install a screen protector free hand. These little tools make the process a breeze

[@volcalstone]

There is always a free tool called scotch tape and using the door method. Having these brackets is always nicer but if I could save some money I could do without them. Sometimes the bracket isn't 100% aligned as well.

[@Steven-e7c]

​@volcalstone what's the door method?

[@volcalstone]

@@Steven-e7c you would clean your device screen first with alcohol wipes. Then lay the screen protector on with the pull tab or layer on the bottom. You would use two scotch like tape or guide stickers that come with some kits. Place them on the side of your device and screen protector at the same time creating a "door" like effect. Make sure the screen protector is aligned first before laying those tapes. Now lift the screen protector and then use those dust stickers to remove any dust. Lastly peel the pull tab while it's facing down at an angle. Now you could drop the screen protector down and it should be aligned correctly.

[@KingHenry-k3c]

Highly recommended don't go for screen protector.....